Just built air cleaner adapter,from your design...worked great!have a 420cc predator in a old Manco Deuce
@GoKartsorGoneFishin5 жыл бұрын
That's awesome man..hope it holds!..we broke ours already..lol..thx for watching!
@terrysalemshikefishcamp11625 жыл бұрын
@@GoKartsorGoneFishin ill do a short video tomorrow and show the adapter and the manco deuce,let ya check it out,i comment when its up
@terrysalemshikefishcamp11625 жыл бұрын
@@GoKartsorGoneFishin videos up...check my page
@mekhifinn88883 жыл бұрын
instablaster
@driftmad201 Жыл бұрын
So does that engine not need back pressure?
@Robert-k7mАй бұрын
I really like the prefab on intake and exhaust.. thata the kind if kids we need. They want so much for parts for those things.. Thank You👍
@cannonballrepair79405 жыл бұрын
That intake was genius!! The exhaust looks great!! Man that thing was booking!! Those 420’s ain’t no joke.
@jasonkowal50214 жыл бұрын
That thing was hooking... was that what you meant buddy??
@str8xrippin3 жыл бұрын
@@jasonkowal5021 no lol😂😂 he meant booking it means it was goin fast as hell
@twistedmichigander49075 жыл бұрын
impressive, I really like the way you did the air filter, and the exhaust sounds sweet. A 63 mph top speed is pretty impressive too.
@landcott10cottrell654 жыл бұрын
Not for a 420 my 221 goes 55
@markcollins50264 жыл бұрын
Man, mine goes 105 mph !
@shhhparkyarky63913 жыл бұрын
@walt krindlpleth i have the same mini bike and engine i wanna get the 420cc
@Blessedup693 жыл бұрын
My 79cc goes 45mph
@1darrious2tim5 жыл бұрын
Wow and all stock and did 63!!! Mph Thats so cool!!!!
@orlandojohnson57423 жыл бұрын
65 MPH!! Impressive!!! That’s the kinda mini bike I’d like to have!!!! Good job man!!!
@GoKartsorGoneFishin3 жыл бұрын
Thx man..still a couple good videos on this bike..its a ripper
@joemorris36175 ай бұрын
ridin in slides is a good way to get a pegleg, there, matey...Arrrr
@jesseguerrero22145 жыл бұрын
That's fast enough to get a helmet for me lol thanks I got my stickers yesterday! Love the air filter and exhaust!
@markcollins50264 жыл бұрын
Man, that minibike is nuts !
@GoKartsorGoneFishin4 жыл бұрын
Thx Mark..I busted my but building it!
@mrmomjoe80195 жыл бұрын
Looks like a blast to ride 😁.got my stickers today thanks Nate👍👍
@country15072 жыл бұрын
I'm a fan at first site . I love it so much I'm gone build a bike off this design
@GoKartsorGoneFishin2 жыл бұрын
He'll ya man..thx for watching and good luck!
@2ATVSANDOURLIFE5 жыл бұрын
Wow that thing is flying 63mph on that would be scary fast
@DerkJester5 жыл бұрын
Daaaayyyyyyyyyuuuuuuummmmmmnnnn! That thing moves out! I love the air filter solution, great idea!
@mcpeake785 жыл бұрын
Got my stickers today thanks Nate. I will send some of mine. Love the build. Awesome.
@mrsgokarts94865 жыл бұрын
Happy to hear u received your stickers already! 😁
@mcpeake785 жыл бұрын
@@mrsgokarts9486 thanks. I will be sending some back.
@mcpeake785 жыл бұрын
40 series TC. would take up alot of your slack in the chain. Might have to run a chain roller tensioner on it. Thats along chain travel.
@PondPredatorNation5 жыл бұрын
That exhaust sounds sweet. Thanks for sharing. Dropping in from farmall fanatic
@owenroth56865 жыл бұрын
Im currently trying to build a baja warrior with a gx270 (same size as a 301) and this is really helping. I didnt know what i was going to do about fitting the engine on and the air filter but i think i will do what you did.
@GoKartsorGoneFishin5 жыл бұрын
Sweet..let me know how it turns out..thx for watching!
@froggersgarage51275 жыл бұрын
I forgot to check mail yesterday but when I checked it I had GKGF MAIL I was happy thank you
@mrsgokarts94865 жыл бұрын
Your welcome 😁
@raybad72774 жыл бұрын
Am in the process of building one homie. Keep up the good work guys. I will be using your video to help Me build mine.
@GoKartsorGoneFishin4 жыл бұрын
Sweet man..thx for watching friend!
@GoKartsorGoneFishin4 жыл бұрын
Did u check out part 3..you should see what we did with it
@raybad72774 жыл бұрын
@@GoKartsorGoneFishin yes am checking it out now. Pretty good guys. AM sand blast my frame down.
@sedric61535 жыл бұрын
Great video! This is exactly like what i want to build!
@breezysbikeshop72205 жыл бұрын
Great work NATE. That thing is sweet.
@ninoreeves77024 жыл бұрын
gearing seems spot on!
@mcpeake785 жыл бұрын
I should have a video coming soon. I got some more funds in and waiting on my goodies to come in.
@CainSample4 жыл бұрын
Bada$$! 👍 i cant wait to test out my baja now after seeing his again...i have the same clutch(comet 1"/420)but i have a predator 301cc 8hp...when you get time could you let me know what gearing front/rear he has on his...im sure i have the same rear sprocket
@GoKartsorGoneFishin4 жыл бұрын
I think it's a 50 tooth on the rear and a 16 on the clutch..and I think all the rears are the same..I think..hmu if u have anymore questions brother!
@GoKartsorGoneFishin4 жыл бұрын
That 301 should pull just fine tho!
@CainSample4 жыл бұрын
Cool thanks....yea it should i havnt messed with it....wait till you see it....impulse buy,saw it pop up on cl sat morning and hopped in my suburban amd drove 2 hours each way for it...$150😂 everything brand new only 15 mins on it...jetx3 bigger and imulsion tube,exhaust,intake...i have to count the clutch sprocket....i want to get a torque converter for it if i dont sell it/flip it.....it would be better for in the woods messing around
@starpuss5 жыл бұрын
*Looks And Sounds Great!!*
@noheart43344 жыл бұрын
I can't wait to Build mines Up I subscribed motivation 🙏💯
@GoKartsorGoneFishin4 жыл бұрын
Thanks man!
@starpuss5 жыл бұрын
_Are you going to change the clutch setup to a Torque Converter or?_ I would be scared of that long chain LOL!
@GoKartsorGoneFishin5 жыл бұрын
Hopefully one day..good point about the chain..thx for watching
@JellAnna-z4y5 ай бұрын
What are the handle bars on the chair? Want the same
@Coolskull2.04 ай бұрын
The motor look upside down the head is in the front usually for the air cooling
@AntonioClaudioMichael5 жыл бұрын
I got the stickers Nate today July 2nd thanks bro
@imtrolling50594 жыл бұрын
Badass! I’m looking to build a mini bike. I’d love to put a 420 on but can’t seem to find a frame that would hold a motor that size. Any pointers? You can really tell when your bike hits the sweet spot. Seems to open up
@GoKartsorGoneFishin4 жыл бұрын
If you wanna 420cc u almost have to mod the frame..haven't found one yet that will fit this motor without mods..thx for watching friend
@justahick32362 жыл бұрын
Coleman mini bikes with little modification works well
@1darrious2tim5 жыл бұрын
I love this build how fast did she get up to!!!!
@GoKartsorGoneFishin5 жыл бұрын
64 mph..scary fast..thx for watching
@tristianbelice70812 жыл бұрын
This buld is awesome, about to start a 420 swap in my ct200u. What kind of clutch setup are you using on this bike?
@GoKartsorGoneFishin2 жыл бұрын
We got the clutch off ebay..pretty much the first 1 inch clutch that pops up..and it seems to be holding up..thx for watching
@servantapashia77244 жыл бұрын
I am new to mini bikes I bought a used mini bike a Baja Blits 97cc. But it does not have enuff Tourge to get up the little hill I need it too :/ Any advice? I bought some sea foam and used that to clean the gas tank and Carb but no luck yet... the engine cuts out too... what should I do?
@GoKartsorGoneFishin4 жыл бұрын
You have alot of choices here.. -buy a net motor from harbor freight for 120 dollars -change rear sprocket to a larger size -or..it could be you need a new clutch.. Truth is your possibilities are endless..I hope this helps..feel free to ask more questions and I will try and help..thx for watching friend
@mitchellferre16523 жыл бұрын
Swap the 212 HF predator engine 6.5hp it fits nice
@ninoreeves77024 жыл бұрын
the only thing that kind of scares me. i think you need some kind of gusset under the tank, front triangle area. pretty sweet. i also like the air cleaner adapter. good work guys
@GoKartsorGoneFishin4 жыл бұрын
She definitely could use more work..part 4 should be out one day..thx for watching and the sub new friend!
@christopherbaunach41373 жыл бұрын
What kind of clutch did you use where you get it from and how long did it last I bought a clutch that was ready for 13 horsepower less than about a week and a half from my 357cc Yamaha now I bought a torque converter that's also rated for f****** 13 horsepower less than about the same amount of time because I thought my motor was only 10 horsepower sandbag myself
@GoKartsorGoneFishin3 жыл бұрын
Do you have it on a minibike or a gokart?...we got this one from ebay for 100 dollars..its holding up so far but is slow out of the hole..65+mph..these clutches for the big blocks don't hold up on gokarts..its just to much weight..unless u gear it down bigtime
@toxicgaming786311 ай бұрын
What clutch is that /where did you buy it please lmk 🕺
@GoKartsorGoneFishin11 ай бұрын
Amazon my friend
@jasonkowal50214 жыл бұрын
Great job on the bike👍 Maybe invest in some helmets
@GoKartsorGoneFishin4 жыл бұрын
Thanks friend..and your 100% right
@zangzang12688 күн бұрын
60T rear sprocket and have some fun!
@ChristopherJones163 жыл бұрын
17:00 what causes the tire to spin and how do you make it stop spinning? I read in the comments on another video where the guy started his up and his mini bike went flying into the side of his house causing damage to his mini bike. So I want to avoid that happening since it seems to happen to a lot of people and catches them off-guard.
@GoKartsorGoneFishin3 жыл бұрын
Sounds like you have a bad clutch or no clutch
@AntonioClaudioMichael5 жыл бұрын
Great video Nate
@IPREVAIL-pv9rk2 жыл бұрын
So how do you do a build like this? I have a custom built mini chopper im thinking about engine swapping for this engine
@GoKartsorGoneFishin2 жыл бұрын
🤷♂️jus did
@dirtyoatmeal7377 Жыл бұрын
Did you need to modify the engine mount plate to pull the engine on?
@GoKartsorGoneFishin Жыл бұрын
Yep
@dirtyoatmeal7377 Жыл бұрын
@@GoKartsorGoneFishin what did you do to it? I have the same frame and I’m trying to put a predator 420 on my bike.
@GoKartsorGoneFishin Жыл бұрын
@@dirtyoatmeal7377 go to my Playlist..I have a video on it
@pacalvotan74926 ай бұрын
what clutch d’yall use?
@demiibjohnson48063 жыл бұрын
What kind of clutch did you use For this build because I built the same bike with the same motor but a lot of people told me that the clutches on the 420 burn out a lot faster
@GoKartsorGoneFishin3 жыл бұрын
They do..
@demiibjohnson48063 жыл бұрын
@@GoKartsorGoneFishin so what’s the best thing I should do buy a lot of them
@GoKartsorGoneFishin3 жыл бұрын
@@demiibjohnson4806 yep..lol
@GoKartsorGoneFishin3 жыл бұрын
They last a good bit..plus you can get 65mph out of em
@Migueldlr-j2i2 жыл бұрын
Did you have to rejet?
@GoKartsorGoneFishin2 жыл бұрын
We hadn't but I'm sure it would have ran better if we did..thx for watching friend
@johngranata55152 жыл бұрын
Its gotta be quieter so you can buzz around with stealth ...
@AlShams697 ай бұрын
I’m a heavy rider would this damage my bike?
@GoKartsorGoneFishin7 ай бұрын
We give that bike hell to this day..
@brianlepley30155 жыл бұрын
Nice work bro
@tomasserrano27938 ай бұрын
What size sprocket you got or your gear ratio
@GoKartsorGoneFishin8 ай бұрын
60t
@wiillthebarbertv94152 жыл бұрын
I want upgrade to a 420cc but I’m hitting 63 mph stock with the 224 straight chained
@GoKartsorGoneFishin2 жыл бұрын
Nice!
@wiillthebarbertv94152 жыл бұрын
@@GoKartsorGoneFishin I imagine the torch itself would be worth it
@mcpeake785 жыл бұрын
Thats fast anuff to be street legal.
@fielde114 жыл бұрын
Is this completely stock governor and all
@WoodsPeople7404 жыл бұрын
I bought a coleman ct200u-ex has the 6.5 love it but i bought a 420 predator to slap in it what all do i need for the swap i seen that the 6.6 has a 3/4 shaft on it and my 420 is 1" correct can you send me links for what i need like my centrifugal clutch i nerd and any other little stuff....man yours is bad af btw great job smart Ingenuity
@GoKartsorGoneFishin4 жыл бұрын
So I have never 420 swapped a Coleman but you will need the 1 inch clutch www.amazon.com/Chain-Centrifugal-Clutch-Sprocket-Engine/dp/B084D5ZDHJ/ref=mp_s_a_1_6?dchild=1&keywords=1+inch+clutch+for+go+kart&qid=1587575359&sprefix=1+inch+clutch+&sr=8-6 Hope that helps..
@WoodsPeople7404 жыл бұрын
@@GoKartsorGoneFishin yup thats it thankyou ill keep you posted with the build sir
@mitchellferre16523 жыл бұрын
@@WoodsPeople740 how did the build go ?
@driftmad201 Жыл бұрын
But doesn't it need back pressure?
@GoKartsorGoneFishin Жыл бұрын
Nah
@driftmad201 Жыл бұрын
Alright then the engine I on my warrior is the stock engine it needs back pressure I guess
@chriskobe85593 жыл бұрын
I want to do a single chain but I need to get a long chain what size chain your running
@GoKartsorGoneFishin3 жыл бұрын
I believe its 40..thx for watching Friend
@gregmorris66044 жыл бұрын
Where did you get the green gas tank?
@GoKartsorGoneFishin4 жыл бұрын
It's a fake gas tank..the real tank is under it..that's a 80cc gas tank..thx for watching friend
@bonezcuztomz77033 жыл бұрын
Looks good
@GoKartsorGoneFishin3 жыл бұрын
Thx friend
@JimmyCandFriends5 жыл бұрын
Oh Ya Baby
@juliaicecreamtruck51712 жыл бұрын
What is the cut size and the sprocket size
@GoKartsorGoneFishin Жыл бұрын
60 tooth
@tashasuarez64263 жыл бұрын
What sprockets did you use ?
@GoKartsorGoneFishin3 жыл бұрын
60 tooth
@ElGuaches2 жыл бұрын
What size end cap did you use?
@GoKartsorGoneFishin2 жыл бұрын
What do you mean by end cap?
@minibikegarage15773 жыл бұрын
Thats so badass
@GoKartsorGoneFishin3 жыл бұрын
Thanks Friend!
@minibikegarage15773 жыл бұрын
@@GoKartsorGoneFishin no problem man. I got a 420 hemi im thinking about putting on my CT200u, you guys gave me the inspiration. 🤘🏻Its so cool to make a mini bike beat up on quads and drit bikes
@quintonjewett52653 жыл бұрын
Will the predator 420 fit my Massimo warrior 200
@GoKartsorGoneFishin3 жыл бұрын
Probably not friend...but I'm not familiar with that bike..thx for watching Friend
@dirtyoatmeal7377 Жыл бұрын
What bars are those
@GoKartsorGoneFishin Жыл бұрын
Harley
@GoKartsorGoneFishin Жыл бұрын
Yep
@christopherbaunach41373 жыл бұрын
What kind of clutch .. website ?
@GoKartsorGoneFishin3 жыл бұрын
Ebay bud
@BunkerBlog3 жыл бұрын
Whats the gearing/tire size?
@ninoreeves77024 жыл бұрын
liked & subed
@1darrious2tim5 жыл бұрын
Do you have the governor in
@GoKartsorGoneFishin5 жыл бұрын
Still has a governor..all stock except air filter and exhaust
@boatdoctors3 жыл бұрын
Did you see him pulling on the governor lever. He's manually bypassing it.
@str8xrippin3 жыл бұрын
@@boatdoctors no he was holding choke cause high vibrations cause it to shut itself thus killing the engine so he has to hold it. I've done this before
@KALINGANJA0074 жыл бұрын
Looks like Lehigh acres Florida
@GoKartsorGoneFishin4 жыл бұрын
Vero Beach my friend..thx for watching!
@Libertymongoose4203 жыл бұрын
Ikr I thought it was either cape coral or n ft myers I moved down to cape coral back in 05 and built a new house for cheap than the housing recession hit in 08 and I moved back to ct but I love how flat and straight the roads are down there I would love to be able to open up my monster moto with a built 212 and see what it could do
@baconmancave32003 жыл бұрын
Are ya'll in VLE?
@GoKartsorGoneFishin3 жыл бұрын
Yep
@mcpeake785 жыл бұрын
Exend that right peg out 3 inches for foot room.
@dawsonbulger45294 жыл бұрын
How fast she go
@GoKartsorGoneFishin4 жыл бұрын
65mph..and that's with a clutch!..thx for watching friend!
@exoticslash75604 жыл бұрын
Are u willing to sell it to me ? And if so how mutch?
@GoKartsorGoneFishin4 жыл бұрын
Not for sale friend...it wouldnt go for less than 1200 bucks if I had to guess..
@exoticslash75604 жыл бұрын
Go Karts or Gone Fishin oh ok I understand and I would probably go for 2000
@@GoKartsorGoneFishin thank so did this work and stay working or did it break
@GoKartsorGoneFishin5 ай бұрын
@@lightanddarkness9387 still works
@lightanddarkness93875 ай бұрын
@@GoKartsorGoneFishin awesome thank you
@abdulkamau28624 жыл бұрын
Nice
@GoKartsorGoneFishin4 жыл бұрын
Thank you for watching friend!
@abdulkamau28624 жыл бұрын
@@GoKartsorGoneFishin u welcome no problem I'm trying to get a 301 predator together
@GoKartsorGoneFishin4 жыл бұрын
@@abdulkamau2862 oh nice!
@abdulkamau28624 жыл бұрын
@@GoKartsorGoneFishin how much faster is it than 212cc predator engine
@GoKartsorGoneFishin4 жыл бұрын
@@abdulkamau2862 it's not about the power..its about the torque..that 301 will have way more torque than a 212 and will allow you to adjust the gearing for the best acceleration and top speed!
@brokensmile84874 жыл бұрын
Throttle response on those carbs are trash. Why not just buy a vm 34 and get the most out of that engine?!
@GoKartsorGoneFishin4 жыл бұрын
It should happen in the future friend..thx for watching!
@brokensmile84874 жыл бұрын
@@GoKartsorGoneFishin I agree. It would make a great video. No one has really put out a video on it. I have did multiple carb installs but dont really you tube them. My friends tell me," you need to show people want you do in your garage"! I can never get around to it though,,,😬
@GoKartsorGoneFishin4 жыл бұрын
@@brokensmile8487 will do..keep your eyes open..we may do it soon!