Voltage Drop Test - Made Easy

[@dirkZigander]

THis is THE BEST, SUCCINCT, CLEAR explanation and demostration of what V-Drop testing does and how it does it. Of All the V-Drop Vids I have reviewed on You-Tube, yours is THE ONLY ONE that makes it clear that the voltage will show (take would indicate current flow) the path of least resistance. Anything in the tested current path that does not allow the current to flow will cause some or all of the current and therefore the voltage pressure to take the path THROUGH THE METER. Also, you made it clear the test must BE DONE UNDER LOAD, i.e., current flow AND that the DVM must be set to capture the highest V surge.... THANK YOU. Tom Jones, New Orlean, LA GOOOOO SAINTS!

[@ArcanePath360]

I finally understand with "the path of no resistance" explanation how this works. Thank you!

[@pauljury4259]

The automatic transcript is rubbish. I just spent an age rewriting it only to discover I can't paste it here! Go figure. Thanks guys for a clear, consise lecture.

[@truthsearcherforever3211]

Good way in keeping it simple.

[@ju2067]

sounds simple enough! Will try that out. :)

[@niole2113]

So... what is the meter setting? 20V DC?

[@xierxu]

Is this true for AC power test? Every time my frig and pump starts my PC turns off and the lights dims.

[@truthsearcherforever3211]

I have a zx6r 07 that has a weak cranking problem. It's has new battery checked the brushes inside the starter

[@traumahawk517]

made it easy to understand ,,thanks,,,,just subscribed

[@OLCTinfo]

Smart video guys, Really good !!

[@cassioabreu7376]

thank you very much for sharing!

[@truthsearcherforever3211]

Can u make a video for motorcycles

[@Premiumstartersandalternators]

Thanks!

[@JON1234A]

excellent

[@sara78130]

thanks nice

[@ahteshamkhan5354]

1 number

[@bobbrawley4466]

can't even hear you. You think this is a decent video? ready for publication/

[@BoredIdeasTV]

Audio was fine on my device

[@mystic24100]

I had to turn my volume al the way up.