Prepar3d | FSUIPC | Macros and Assignments

[@jozefff7911]

Thanks a lot man!! Using fsuipc for years and never knew about the mouse macros!!

[@desi_patriot]

Excellently explained mate... very lucid.. thanks.. U made my job very easy.. I was basically breaking my head over it.

[@joshuamarius]

Thanks so much for taking the time to make a video. This has been very useful. It was easy to follow and understand.

[@liveriesfsx9352]

Thanks for the video. Good explanation in a simple way, that's what I needed for assigning 3-position switch to Autobrake INC/DEC function.

[@zyzzovereem]

i have tried for a320 lights that have 3 position ON TAXI and TO but wont recognize the middle on alt/hdg as a button and doesn't assign well

[@anbrod1]

nice tutorial!!, just purchase the warthog, and is going to try to get it set up.

[@MrNICAULISES]

Great tutorial however how you set up thrust revers

[@RotationFSX]

Great tutorial - thank you :)

[@aviator268rb]

Nicely done man thanks!

[@ayonpal]

How do I create a mouse macro or similar thing in P3dv4? Any suggestions will be highly appreciated.

[@paulburley2524]

Hello, you did not explain how to create macro for a PUSH button. I want to push a button to enable ground steering in my A320 and push it again to release it. Can you explain this please, yhanks.

[@eugene3957]

How does I use the function of the Buttons & Switches to set a key on joystick to active 2 bottoms at the same time? For example: when I fly FSL A321, I can use FSUIPC to set a button to turn off the PF's FD and set another button to turn off the PM's FD. So, but what I want is that when I press a button, PF and PM's FD will be turned off or on at the same time.

[@kandiys]

Why is the throttle in the game jittering when you push it full forward? 3:10

[@77flyer]

GREAT VIDEO, do you have one on how to setup the flaps using the same type of quadrants?

[@johnlloyd5184]

Great Video is it the same principle for the PMDG A319 , would you be able too do a complete setup guide for these Aircraft would be really helpful

[@xavierfrankfurt3293]

john lloyd PMDG has never released an A319

[@johnlloyd5184]

@@xavierfrankfurt3293 Sorry I meant too put A320

[@xavierfrankfurt3293]

john lloyd I’m pretty sure PMDG have also never released an A320. You may be thinking about Aerosofts A320

[@johnlloyd5184]

@@xavierfrankfurt3293 Yes you are right it is Aerosoft A319/A320 no idea why I thought it was PMDG must of had a senior moment lol. would you be able to do any video's for the Aerosoft. thanks :-)

[@zyzzovereem]

THANKS just questions , 1) how can i delete a macros created 2) how to do it with the 3 position switch (path alt/hdg and alt) wont pick up the neutral switch as a button

[@snappcloud6157]

There is no Macros and Assignments in my FSUIPC??

[@kicks270]

can you assign reverse thrust with that throttle?

[@MorganThomas757]

Thankyou so much! This really helped!

[@vette5007]

Thank you very much man really helpful vid thanks again ✌️

[@aaronbattle8559]

Thanks so much now I can finally play the game lol.

[@Technobosse]

hello, please, what button or switch do you use on the WARTHOG to go up or down the flaps?

[@mitsoswu]

NICE ONE !

[@mihalyfreeman5928]

Your MACRO assignment for chime is flawed. Where is the AUTO position?

[@adamfinger6631]

Thank you!

[@jmavphoto]

question, i set up my axis's and everything works fine, EXCEPT for the rudder. i have rudder pedals, which worked fine, UNTIL I set them up with fsuipc. now, they will not respond to the sim, and when i reset it, it did nothing! i need help!!!

[@EliotM]

Joshua Moore if u use Ezdok turc of fuselage shakes

[@KEITHGEE1000]

Hi very helpful, many thanks!! I’ve had the pay FSUIPC for years but only used the saved facility!! Needed to assign a key to the Premier 1 dumpers. Your video sorted this. I’ve subscribed but you seem very quiet. Are you still in the flight sim world? Keith

[@IRRevs]

no macros in the new version for p3d v4. What to do?

[@anbrod1]

Now the exsampel you use is the PMDG, these settings i make in the FSUIPC, will it apply on other aircraft too, like Captian sim757, Carenado, Aerosoft??

[@zillaflightsimmer4937]

Hey how are u. I need some help to progra my hotas. Can u help.me.please ?

[@TheNinevehKid]

I noticed the date of your video is 2016 and there is no mention of which version of P3D or FSUIPC you are using. As I followed the audio and transcript of your video, you seem to indicate that FSUIPC turns off the assignments for throttle, joystick and switches automatically when you map the assignments in FSUIPC. Please clarify if this is true. I am using the most current versions of P3D and FSUIPC and it is my understanding that it is necessary to first turn off these assignments in P3D before mapping them in FSUIPC.

[@cocovers-music]

Thanks so much

[@thomasolschowski8420]

Thanks for this tutorial! Is it possible to put the reverse thrust into the afterburner area of the Hotas?

[@quraishifly5698]

No problem Thomas. Yes it is possible and I actually use it aswell. Set the afterburner area in the buttons section of FSUIPC. Only limitation is that it is always full reverse and never idle reverse.

[@thomasolschowski8420]

So it doesn't actually recognize it as an axis but as a button?

[@quraishifly5698]

That's right unfortunately :( If there's a way around it I would love to know!

[@zillaflightsimmer4937]

Need some one on one tutorial .

[@JoseAntonio-ym1ze]

Hello, I have FSUIPC for payment. I want to make macros with the mouse but the text does not appear to me. Do you have to have something installed (SDK) or similar? Thank you

[@quraishifly5698]

Hello mate! It should appear automatically my friend. I don't have anything extra installed to help the text come up, thats a weird one.

[@JoseAntonio-ym1ze]

Thanks for your reply. Sorry but the test I did with FSX Steam, I have tried to do with P3D v3 and it works perfectly. Regards

[@Alexander-vr9yr]

very informative....thanks . threshold

[@leeboyd731]

Hi - I am having trouble programing rotary switches using mouse macro? Will FSUIPC allow me to program rotary switches i.e. 4 -5 clicks? Thanks. Great video! Lee

[@quraishifly5698]

Hi Lee, typical me to not respond for 2 months, my apologies! FSUIPC lets you do just that, its the perfect tool for issues just like yours so I highly recommend it, more importantly the paid version is what you need!

[@zenghuating]

can you just share the setting profile to us?

[@bassam4545]

Hi mate, thanks for video, i would like to ask, can u setup Flaps gauge with fsuipc? thanks

[@quraishifly5698]

Hello Bassam, thank you very much! Yes you can set the flaps via FSUIPC. You will need the full version and all you need to do is select FS Control and select flaps increase/decrease depending on what you want to map. Hope that helps, drop me a message if you need anything else.

[@hariiyer1852]

Loved your tutorial !! and I am thinking of of getting the warthog thrustmaster for my p3dv4 setup. I just have a quick question. I presently have Saitek -Throttle Quadrant, Joystick and Rudder pedals. I would like to replace ONLY the throttle quadrant but retain the Saitek Wheel(Joystick) and rudder pedals. Are there any compatibility issues( port conflicts?) in mixing and matching that I should be aware of? Best Regards Hari

[@ThatRedGTI99]

Hi! it is possible to do that with a keyboard?

[@quraishifly5698]

Yes it is :D people use 2 keyboards for flight sim with no issues whatsoever.

[@falhumas8076]

Hi There... kindly advise, if you already using FSUIPC, do you still install the TARGET software? I am using FSX here?

[@quraishifly5698]

Hello Anwar, I did not install TARGET. As long as you have the full version of FSUIPC you can solely use that to map your assignments. If you need anything else dont hesitate to drop me a message.

[@falhumas8076]

thanks... let me try first installing the paid FSUIPC.... your video is really inspiring and helpfull....

[@joaoaugusto9811]

33k views and 295 likes...Hey, guys, come on.. I am sure he helped a lot of us

[@siargent1709]

Hello. Do you need to disable joystick in P3D control settings for this to work? Great video BTW!!

[@quraishifly5698]

Hey mate, thanks for watching! Yes you do otherwise you will get double inputs which means when you put flaps down for example, it will put double the flaps down :D

[@andreinecuta2537]

Hi! What add-on are you using for Prepar3d now? Do you have a specific 737 one? I've seen that the camera movement is brilliant and the cockpit looks great! I'm still trying to transit to P3D from FSX. Thanks!

[@quraishifly5698]

Hello Andrei! I am currently using P3D V3.4 with the most updated graphics drivers for my graphics card (GTX 960 2GB). The camera movement in this video is actually with EZDOK v1 however I have now moved over to Chaseplane which is my camera addon of choice. I use other addons such as the PTA tool, Active Sky 16, PMDG 737 and various others. Good luck with moving over, its a really long process but once its done you will appreciate the difference :D

[@andreinecuta2537]

Quraishi Fly :) Thanks!

[@최원준-l7h]

How to get fsuifc?? please

[@quraishifly5698]

Simmarket is where I got mine from :)

[@latelammas100]

Google Is not my best friend today. @YaaseenQ