Preparing Bare Steel and Spraying Epoxy Primer - The Resto Shed

  Рет қаралды 19,871

The Resto Shed

The Resto Shed

Күн бұрын

Пікірлер: 31
@paulnewton943
@paulnewton943 Жыл бұрын
Yep more like this please. Clear and to the point. I have heard once before about the mix and sit , but told not to bother. Thanks for clearing that up. It makes perfect sense to do so.
@immanutt4442
@immanutt4442 Жыл бұрын
Thanks a Mint for another great tutorial !!! ... and Greetings from the Upper Ohio River Valley !!!
@TheRestoShed
@TheRestoShed Жыл бұрын
Thanks for watching. Cool to think someone over 16,000km (just under 10,000 miles) away is watching! Lol
@immanutt4442
@immanutt4442 Жыл бұрын
@@TheRestoShed wow !!! ... did Not ever realize that distance actually ...
@samperras
@samperras Жыл бұрын
I painted my first car 35 years ago, this epoxy has certainly changed the game
@scotthunter1639
@scotthunter1639 Жыл бұрын
Great to see you back Kyle great content mate..👍👌
@TheRestoShed
@TheRestoShed Жыл бұрын
Thank you mate
@causticsdoorremovalservice1893
@causticsdoorremovalservice1893 Жыл бұрын
I enjoyed that mate, thanks for taking the time to explain.
@TheRestoShed
@TheRestoShed Жыл бұрын
Thanks for watching.
@mattspeakers3260
@mattspeakers3260 Жыл бұрын
Awesome info mate! Cheers!
@TheRestoShed
@TheRestoShed Жыл бұрын
Thanks for watching
@deankay4434
@deankay4434 6 ай бұрын
Without the door skin off, after metal work is done, I use a concrete and metal cleaner inside using a small pump. I make a homemade play dough to plug weep holes and catch the chemical as it runs out one end. It turns rust into iron phosphate! Then spray and wipe to clean while allowing several days to dry. Rust turns black and stops future problems as it seeps into the seams and pinch welds. With a detail gun and plastic sleeve, I spay epoxy inside the door and other panels. Once painted, I complete the inside with a pro-gun setup using a cavity wax from quarts of product. This one is mine and should last 50 years after I am gone. DK, Omaha, NE. USA ASE Master since 78.
@craigrichardson7087
@craigrichardson7087 Жыл бұрын
Excellent tutorial.
@TheRestoShed
@TheRestoShed Жыл бұрын
Thanks for watching
@jeremyd9388
@jeremyd9388 Жыл бұрын
looks nice i do use isopropyl alcohol for a final wipe down using white or light colored rags until the rags stay clean no more grime coming off as advised from watching other posts
@TheRestoShed
@TheRestoShed Жыл бұрын
That will work too, but I do not find it necessary at this stage. To each their own, this is at the end of the day just want I do and find works for me. I find introducing any wash/solvents will increases the chances of little fluff balls being caught up in the keyed up surface when being applied/removed with rags/cloths.
@spitzndtruth1484
@spitzndtruth1484 2 ай бұрын
We do this inherently out of insecurity typically.. But as mentioned In the video the panel has been hit with degreaser, sanded rinsed and dried fresh gloves have been used and so on. Sufficient I'd say.
@bert-bb4lf
@bert-bb4lf Жыл бұрын
Awesome channel mate. Keep it up 👍👍👍
@TheRestoShed
@TheRestoShed Жыл бұрын
Thank you
@PangazShed
@PangazShed Жыл бұрын
I'm happy you mentioned mixing the epotec 15 mins or so in advance to begin the chemical reaction. Glad im not the only one, but I wonder why the TDS doesn't call for it? Great vid, keep them coming.
@TheRestoShed
@TheRestoShed Жыл бұрын
Not sure why the TDS doesn’t mention it, but I suppose it probably doesn’t warrant it in their testing facilities. Thanks for watching
@halayeous
@halayeous Жыл бұрын
Great video, do you have any product recommendations for weld through primer (or any to stay away from)?
@TheRestoShed
@TheRestoShed Жыл бұрын
I prefer to use Upol #2 on MIG plug welds. But it is important to only use it on the overlapped seams, it is NOT a primer and cannot be painted over.
@deanmarskell1518
@deanmarskell1518 Жыл бұрын
Hiya Shane not sure where you are but in the UK Halfords do a weld through primer that I've seen on a channel called Dave's Garage he's restoring a MK1 escort and he tested various weld through primers this cane out on top as the best he had a piece of scrap metal that's been sitting outside for over a year and has no rust under the coating at all unlike other products he tested hope it helps?
@MrFireman164
@MrFireman164 5 ай бұрын
@@deanmarskell1518halfords recalled this product because it was exploding when shaken.
@lukebarrett7327
@lukebarrett7327 Жыл бұрын
Thanks for the effort you put in for these videos! Interesting that you rub the phosphoric coating off before epoxy, Howard from Astill Design has a video with PPG & they say to leave it on under the epoxy. Obviously your method will be fine because you’re spraying it straight away but interesting all the same. 👍
@TheRestoShed
@TheRestoShed Жыл бұрын
Thanks for watching. I use a different epoxy to Howard although both are (now) PPG branded. Personally I’ve had catastrophic delamination issues in the past following the same process show albeit less the sanding of the phosphate coating before epoxying (as had many other when I questioned what I’d done wrong!) So now I just do a panel at a time and get it in epoxy ASAP after abrading the surface.
@Supanova70
@Supanova70 11 ай бұрын
A stretch bungee cord and add a hook to the panel holder base so you have proper mil thickness. Just my 2cents.
@benjohnson7170
@benjohnson7170 Жыл бұрын
Sweet,back on the You Tube horse mate. With some handy tips for hackers,such as myself. How long could you leave 2k in the gun for with catastrophic situations. Cheers
@TheRestoShed
@TheRestoShed Жыл бұрын
Really depends on what paint you’re spraying, you’ll have to check the ‘pot life’ in the technical data sheet.
@cnoonan164
@cnoonan164 Жыл бұрын
Keep up the great work. My jealousy thanks you.
Mixing and applying EPOXY primer/sealer on the 1985 Fiero GT
27:19
Какой я клей? | CLEX #shorts
0:59
CLEX
Рет қаралды 1,9 МЛН
Thank you mommy 😊💝 #shorts
0:24
5-Minute Crafts HOUSE
Рет қаралды 33 МЛН
Bare Metal To Bodywork Don't Miss These Tips and Tricks.
1:17:52
SYLVESTERS CUSTOMS
Рет қаралды 61 М.
How to: Clean Rusted Panels
21:13
The Resto Shed
Рет қаралды 10 М.
Bare Metal Prep for Epoxy Spraying - GTO RestoMod (Ep 25)
30:49
Foothill Paint and Fabrication
Рет қаралды 3,4 М.
Chemical Dipping a 1972 Porsche 911
24:32
minute_of_dangle
Рет қаралды 995 М.
Melting Copper Wire Into a River Table
16:53
Burls Art
Рет қаралды 3,2 МЛН
How to: Mig Weld Sheet Metal - Butt Weld & Metal Finish
39:47
The Resto Shed
Рет қаралды 10 М.
How to prep and paint bare metal
14:19
Killing Cursive Kustoms
Рет қаралды 7 М.
Understanding Primers:  Epoxy, Polyesters, and Urethanes explained.
16:15
SYLVESTERS CUSTOMS
Рет қаралды 317 М.
How To Prep Sand Blasted Steel For Epoxy Primer
9:48
Bog Dust For Breakfast
Рет қаралды 18 М.
Explaining the benefits of using epoxy before body filler
4:09
Linear blocking Tools
Рет қаралды 45 М.
Какой я клей? | CLEX #shorts
0:59
CLEX
Рет қаралды 1,9 МЛН