PreSonus Studio 24c Audio Interface Review (audio quality test)

In this video I check out the PreSonus Studio 24c.
Amazon | PreSonus Studio 24c: amzn.to/3iYFUFG *
Support future videos on Patreon: / juliankrause **
Follow me on Twitter: / thejuliankrause
00:00 - Intro
00:09 - Hardware Overview
02:16 - Mic Input Frequency Response
03:08 - Mic Input Distortion
04:16 - Mic Input Dynamic Range
04:46 - Mic Input Preamp Performance
06:16 - Mic Input Max System Gain
06:43 - Mic Input Impedance
06:55 - Line / Inst Input Performance
07:14 - Main Out Frequency Response
07:27 - Main Out Distortion
07:52 - HP Output Performance Overview
08:02 - HP Output Frequency Response
08:07 - HP Output Impedance
08:35 - HP Output Power
08:43 - HP Output Distortion
08:48 - HP Output Noise
08:56 - HP Output Channel Balance
09:06 - HP Output Crosstalk
09:13 - HP Output More Graphs!!!
09:28 - Round Trip Latency
10:00 - Loopback Feature
10:17 - Verdict
* Affiliate links from which I receive a commission for sales. This doesn't generate any additional cost for you. As an Amazon Associate I earn from qualifying purchases.
** Patreon is a platform where you can voluntarily choose to support the channel by purchasing a monthly subscription.

[@thestickbot]

In a sea of reviews where people just say "this sounds really good" or "could be louder", it's super nice with a review from someone that clearly understands the different factors of the hardware! Thanks a lot!

[@LightWingStudios]

FIRST Interface review I've EVER seen where "the lid" was cracked and gives a look at the components. Well done. :)

[@vexpired7559]

Your video was a delight to watch and hear, by the amount of knowledge and time you must have spent putting this together. It showed me clearly what I am looking for and what I don't want. Thank you.

[@Alex_Martz]

I just found your channel and this is by far the BEST channel for accurate reviews of audio interfaces!, I obviously subscribed 🙂 One suggestion: it'd be great to include in the test SMAART transfer functions to see the phase response and group delay as I have found some interfaces induce a LOT of group delay and weird phase shift

[@davidsala9549]

Thanks for this Audio Interface Review. You have great and thorough videos. Well done! It has been helping me make a decision to find a budget Audio Interface for myself for my small studio. I used to own a PRESONUS about 15 years ago and things have changed a lot! Still looking at all of the options like PRESONUS, FOCUSRITE, M-AUDIO, MOTU, Etc. Cheers! 😀

[@WycliffStudios]

I'm a fan of your reviews. So honest and thorough! You deserve millions of views! I have recommended your videos to my friends as well

[@WildernessMusic_GentleSerene]

WOW! That was the most thorough review I have ever heard on KZbin. Amazing. This is the ONLY review that tested the outputs. No other reviewer ever mentioned the output performance. Everyone wants to talk about input preamp performance, but how are you going to listen to that input performance, yes, from the outputs. The main reason I bought the PreSonus Studio 24c was for the DAC and output performance with the added benefit of MIDI DIN connections. My studio remains 100% hardware at this time. I own a DAW but don't use it anymore.

[@Yousef.Shamali]

Can you please do a comparison between Apollo Twin USB for Windows and Apollo Twin thunderbolt for Mac and SSL2+ Interfaces? and What type of interface do you recommend for a Neumann TLM 103 Microphone?

[@samyak5876]

here you have the review of the ssl2 kzbin.info/www/bejne/eoC3Zph8rcR6adU

[@666tonsofsquirrels]

Wow, the Steinberg white noise machine sounds really great. Really great and in depth video as usual Julian. Bleib gesund!

[@JulianKrause]

Steinberg white noise machine 😂

[@DrWurzeli]

lol

[@grahamhall2662]

Wow fantastic review. Some quantifiable figures and what they mean. Finally I found a review with substance to it, even if I do not fully understand all of the numbers, you have give me a very good insight as to the quality of the electronics and how it performs, even had a peek inside. A very big thank you.

[@geoCow]

Very complete review. I hope your channel grows. 10/10!

[@KebbaPropulsion]

Excellent reviews. But would be nice to have reviews on the DAC clarity in comparison to similar interfaces. I work entirely in the box and am mainly interested in getting as pure a signal as possible into my monitors and headphones. You go into the depths of the tech specs but how does it sound in practice as a DAC compared to other interfaces. There is definitely a difference, my Mackie Onyx sounds more pure and open than the Behringer 204HD and Focusritte 2-2 2nd generation I have tried before. The best interface I have ever owned for dac quality was EMU 1212M, that had incredible conversion , really pure and flat as a pancake.

[@josephdinh-vu3953]

Very comprehensive. I purchased the PreSonus Studio 24C unit some days ago. I look forward to using it keeping in mind your comments.

[@thefeet]

Excellent review again! MIDI in/out is a MUST for me as I have many high-end physical keyboard/synths dating all the way back to the 80's. This looks like a GREAT Audio/MIDI interface and will be picking one up! My Runner-up choice was the Roland Rubix22 as it was in the same price range and also has MIDI but it lacked the LED meter & "mix' button on the front which is fine for me, but my wife will be using this and I'm SURE she will no doubt appreciate those features! Thank you for taking the time to produce a very thorough review! SOLD!

[@papankunci]

Julian is very informative and the best audio interface reviewer!

[@berndkiltz]

Once again, the best audio interface reviews on youtube. keep it up!

[@andreipopa4969]

Very very detailed and informative! It would be a blast if you could do such a video about Latency and also Real Life Performance Latency, such as testing how many plugins can you load on your PC with the specs shared of course. Best regards and Danke schoen!

[@graynoone]

Have been following your reviews for a while now, the information you provide is outstanding, thank you, based on this review I have ordered this interface.

[@nikil07khatri]

Hey buddy Hello from Mumbai/India. Have seen many of ur videos/excellent content and of many other famous tubers like u on music and recording in order to setup my own small home studio. I must say ur content i. e. reviews and guidance on products is unbeatable even so many greats and experienced I have seen so far on YT. You truly zoom in on every single aspect and even consider and talk on technical aspects many experienced I haven't seen doing so. It shows how true and deep ur tech, music and sound understanding and knowledge is. Also ur personality as a person that of literally a scientist who keeps dissecting the specimen until the last cell, 🤓👏wich is great fr u to grow in life and fr us to learn from. Thanks fr all the great content dear. 😊

[@arturocampos8362]

Finally someone that knows how to review! Great job! 👏

[@harcopolo]

Excellent review as always! Please review the Audient ID14. Thinking about buying this over the SSL 2+

[@arkada]

THanks for the vid Julian, would yo recommend me this (or the Studio 68c) over the Audient EVO4 ( or the EVO8) ? Greetings from Brasil

[@honestnerd]

Nice video as usual. So, for a mic like the SM7B, which interfaces do you recommend?

[@malinkifox2011]

I have it and very happy with it. It’s plug and play and made my at2020 sound Gucci

[@ivanivanovici]

These are the bests vídeos of interface review I ever see. I was looking for these review (and the 26C). The pressonus studio 26c have better specs (microfone and phone amps) and cost's a little more. Will you review the 26c?

[@Hey_you_guys]

Fantastic review, very thorough.

[@bunty31287]

Thank you for yet another in-depth review. It's so empowering to have these un-biased no nonsense reviews! Is there any way to check/review the robustness of the drivers and how they perform with some DAWs? With most of the 'Specs' these days very much acceptable for general usage, the problem these days is how the interfaces perform with certain DAWs (read - Pro Tools)

[@JulianKrause]

Good point, I'm looking I to evaluating the driver performance but so far I haven't found a repeatebel testing method. It's definitely on my to do list.

[@Anhidema]

You're such an intelligent man Julian , I admire your knowledge. Such reviews are most needed to dive deeper in tech level to know whether or not it's worth spending money or no. Thank you ✊

[@XiaoyongHuang]

Excellent review with thorough and comprehansive details. So far the best I've seen. Hope you could do a review on Presonus 68C. Thank you.

[@CV131]

Excelent job as always! Review the audient id14

[@ericbaseY0]

ive been marathoning your reviews. ive learn a lot since. huge thanks. plus, your i like your morgan freeman sound-alike voice. lol. cheers.

[@petroskaranikola972]

Thanks for review videos you are very good at it!!! What should I check in an interface so I get the most clean sound in combination with a small diagram condensing mic?

[@MotoGreciaMarios]

Excellent review, thanks. I went ahead and purchased one of those. I was blown away by the sound quality and the sound image/stage. Those excellent crosstalk numbers really make a difference. I am using 32 ohm headphones and indeed the high phone output impedance proved to be a problem but I drove them from the "main out" outputs and problem solved - crystal-clear sound. I just use a switch to change routing from headphones to speakers and vice versa. I found a pretty neat use for the headphone output too: I record directly in stereo instruments that are normally mono, using my Soundblaster's line-in, for reviewing my progress with my bass guitar, in Audacity which is much more convenient and hassle-free compared to real DAWs :).

[@ClarkSpencer1]

what you mean by "main out" ? so u bought this interface and plugged headphones not to inferface but to your pc/laptop?

[@MotoGreciaMarios]

@@ClarkSpencer1 The interface has two outputs - one that goes to speakers ("main" out) and one that is intended for headphones. What I did was connect the headphones to the speaker ("main") output and the headphone output is plugged in the Line-In of the Soundblaster for real-time "loopback" style recording in Audacity, in stereo. I use a switch to divert the "main" out from the headphones to my desktop monitors. Be advised, I bought the interface used and I can not use the accompanying DAW/software, only the basic driver is functional so I can't have loopback any other way.

[@cristianturcan7659]

What is exactly the problem of using 32 ohms headphones with studio 24c ? How it manifests practically ? Also can you describe more specifically how you deal with this problem, please ? Thanks in advance !

[@MotoGreciaMarios]

@@cristianturcan7659Ιt's very simple: if you plug headphones into the headphone output jack you'll have more bass than normal (actually bass is normal and for everything else there is less of). Solution: plug them to the main out instead, using an adaptor plug. If you also need to drive speakers use a switch. Another solution would be to use a dedicated headphone amp between the headphone output of the Studio 24c and the headphones themselves. That's what I eventually did.

[@cristianturcan7659]

@@MotoGreciaMarios Thanks a lot !

[@theAristocrap]

Thanks for your review. I based my decision on it, been using it for a year and a half. In my opinion the interface is fine but using shures SM57 and SL26 I need to crank the input volume almost to the max - didn't have that problem with focusrite and tascam.

[@soregum9077]

Nice review as always! Would love to see mackie onyx producer review.

[@michaeloravecz5752]

Any plans to review one of the Arturia AudioFuse audio interfaces? They are somewhat expensive, but it would be interesting to see how an AudioFuse interface compares to the Motu M2 and the others.

[@monsterfriend5028]

Great review, man!

[@sergiomendonca5321]

Great review. Thanks, man.

[@berkozklc2705]

Hi julian thanks for everything you teach us :) umc202hd vs presonus 24c ??What do you say

[@vau_st]

Wow, was für eine gute Review! Vielen Dank!

[@DrSpaceman69]

Wow this is super informative. Thanks for the thorough review, I think I’m gonna buy one

[@KLov77]

What a great review! From your experience, which one do you prefer: This presonus or Komplete Audio 2 from NI.

[@volcaniadread]

Sehr professionell! vielen Dank für dein Video :)

[@davidfuller581]

It would be interesting to see the studio 68c. It's got a lot more gain on tap in the preamp than the 24c - I believe presonus quotes max of +80dB on the 68c and +50dB on the 24c. Might be running on a higher voltage rail than the bus powered 24c.

[@alicheffofficial]

Oh my gosh I love your videos so informative and doing the hard labor for us. Have you happened to check out the PreSonus Revelator io24? I would be curious to hear your thoughts on that particular interface.

[@danio5191]

Great review. Are you planning on doing any Mackie audio interface comparisons? I've been personally interested in seeing the Big Knob Studio as it also apparently has a very good headphone amp.

[@KebbaPropulsion]

My onyx producer has a very good headphone amp...very loud and clean. Very hard to get it quiet enough for 32ohm headphones sometimes without the balance going towards the left channel though ..very annoying..same issue with the Presonus 26c aswell unfortunately...

[@anujmuzik]

what a detailed review! Brilliant!

[@guillermotorresva1492]

thanks for the review! excellent, what difference would there be with presonus 26c in audio quality, and fidelity of its preamplifiers? could you compare it to Motu M2 or M4? Thank you! Best regards!

[@barjeshkumar5276]

👍for this video ! Sir, I want to upgrade my Audio interface (focusrite 2i2 2nd gen ). Which one is better audient ID14 or focusrite clarett 2pre ? Pls suggest me.

[@dropoutnow7059]

how would u rate motu m2 , 3rd gen focusrite, 48c and ssl? i would love to hear ur overall opinion on these interfaces

[@cigarelive]

Bonjour Julian. J'ai du mal a parler anglais 😭 J'hésite à acheter cet appareil pour le son de nôtre chaîne. 24c, 26c, 64c... focusrite, m2, m4, ssl2.... je ne sais plus quoi prendre. 2 micro neumann et une table soundcraft pour le moment Tu en penses quoi de la 64c ? Merci pour ton aide 😉👍🇨🇵

[@Ninja_Gaijin]

Love your work Julian. Any chance you could review the Presonus io24 Revelator? I am looking for an audio interface that can link 2 channels as a stereo pair for gain matching easily without messing around with metering.. this seems like the easiest option. But would love to see your results on it if you could review it!!

[@danielfernandes1010]

Thank you so much! This is so helpful!!

[@arob8493]

Finally your back. Where were you all this time?

[@Sikasz]

insane quality, keep going

[@supersonicsroots]

Thanks for this. Could I apply your findings of the 24c also to the 1824c (regarding the distortion of the preamp and low headphone output etc.). Or would the Scarlet 18i20 be a better choice, quality wise on these specific points?

[@LaidbackSounds]

go for the 1824c converters sound way better

[@wojciech_c]

Good job, like always.

[@Resiliencebalado]

I own the 24c since last year. When I have bought it, I was new to this (interface, audio, etc.). I actually use a AT2020 condensor mic (plug XLR) and I recently bought a Presonus PD70. After testing the studio 24c, do you think it could be a good add on to buy a pre amp for my dynamic Mic? Cause honestlay, I need to crank the gain almost the the rough to be able to get a decent recording (between -9 and -6dB) I know that the two input are already preamp, but I'm not quite sure it's enough. Since my gain is really high, the room tone is also high. Thank you! Very good review though

[@stadiosports8690]

You’ll need mic inline preamp for 24c to use with dynamic mic..

[@LEUNN_]

Will using the Shure SM7B without the cloudlifter and adding digital gain add in more noise? Is it really worth it to get a clean recording to use it? I'm at a point where I could buy the mic and the cloudlifter, but if I can save money from buying it that'd be great

[@kyron42]

Another great review.

[@garyshepherd9226]

The knobs are fiddly - its why I went for the Audient ID14 instead - nice big knob!

[@wingsofliberty9694]

Amazing review ..

[@frusciantestar3847]

Hey, Julian. Hope you're ok. In your review about the Motu M2 (around 8min50s) it's show a RTL of 15.9 ms for a Sample Rate of 48 kHz and a Buffer Size of 128 samples. This Presonus Studio 24c has a RTL of 9.5 ms for the same other parameters. It's a huge difference. Is that correct? I always tought the Motu M2 offered better RTL times. Thank you for your reviews, they really helps.

[@nimrodery]

Those settings in FL Studio ASIO with the M4 get me 3 ms, after plugins 9 ms. Not specified whether that's round-trip but I can confirm the latency feels low and response is pretty snappy.

[@Soloist1983]

Tascam might have the best latency, you can set their ASIO to 4 SAMPLES, and apparently it's stable due to an in-house driver they created; probably takes a decent computer to make it very stable but it's worth checking out

[@generalawareness101]

On my Windows 10 system the lowest I can do is around 10ms-12ms (sample rate doesn't matter) and using ASIO I managed to get down to 1ms. I was shocked but 3ms on the M2 was fine using FL Studio and the MOTU ASIO driver. Now having said that MOTU M2 is crap and I will never ever touch another of their products. I purchased two different ones from two different sellers in a 4-6 week timespan and both died on me in under 10 mins. The first was 8-10s of recording then USB said it was there but could not handshake with it so dead. Yesterday evening I went to use the second one and it wouldn't even turn on. I thought my USB port was blown by it but I swapped over my kybd and it worked but still the M2 was dead. I pulled out the cable from its back and re-inserted it and flipped the on switch and everything work EXCEPT no computer will detect that anything is even plugged in. That makes two hardware failures and I suspect it has to do with everything being ramped up to keep up with the human malware causing a mad rush for devices so QC is gone and the machines are being pushed too hard. Anyone who reads this you have been warned. Oh, and USB-C sucks and I hate it. Cables are expensive at ~8 USD per foot for a real one and the included 1m is too short and being USB 2 the limit is 5m so give us a 2m one and all would be fine but 1m I couldn't work with very well.

[@nimrodery]

@@generalawareness101 They're not pumping them out fast, I ordered mine and had to wait maybe 3 months. No signs of being rushed and the unit works perfectly. Have you contacted anybody at MOTU? Their service was pretty immediate (I had software problems).

[@generalawareness101]

@@nimrodery I am in the USA so we come first with a USA company like MOTU and it took 6 weeks for them to go back up for sale (seems to be in a six week cycle on Amazon in the USA). Yes, they are working overtime but simply can't keep up. Fact is another reviewer on YT said many people are complaining about this lately from reviews so I am not alone (he is a M2 fanboy too so was not easy for him to say that). It is a shit product now so I am done with them. edit: Their support is top notch but their product is just a failure right now.

[@arm4nmusic923]

good review,is it good for dynamic type mic like sm58(recording guitar and vocal)?

[@AZKidsDaily]

Nice review you have here.

[@essenceofjoy1837]

Julian I hesitate between stainberg ur 22c and presonus 24c .which one you would pick?

[@pashasoofi30]

Hey Julaian! Between this and the m audio 192 4 which one would you recommend?

[@nukedathlonman]

Thank you - this was very useful.

[@sergeysmelnik]

I compared the dac sound quality of the focusrite, steinberg and audient id14. I only use the mic input for measuring and eq of my monitors. I tested on jbl lsr30x monitors. I really thought all three units would sound the exact same way besides maybe noise floor. The audient is the weirdest one. It has a high end treble lift and its pretty noticeable. The focusrite just sounded like it had a lower quality dac in general. Everything had a sort of metallic sound to it. Kinda like going from cd bitrate to 320. Most people wouldnt notice but on revealing speakers its there. The steinberg had nothing weird about the sound. Smoother than the focusrite and similar to the audient minus the high end lift. The steinberg is also the heaviest.

[@SheldonTam]

Wondering what is the model of your Focusrite? Is it a 3rd gen product? Thanks.

[@sergeysmelnik]

@@SheldonTam 2nd gen

[@stefanoserrotti7493]

Hi Julian and thank you for your precious reviews! I'm buying the PreSonus Studio 24 C and I'm searching for the most suitable headphones to use with that interface. In one of your videos you say that the impedance of the headphones should be at least 8 time the impedance of the phones amp on the interface. The PreSonus has a headphones amp impedance of 22 ohms (@1Khz), and you say that the right headphones should have 80 or 150 ohms. In the table at 8:36 I see that the PreSonus works better with headphones with impedance of 32ohm (output power of 51,20 mw) instead of headphones with impedance of 150 ohms (output power of 23,56 mw). I expected the exact oppsite. Why? In this video you suggest the Sennheiser HD5xs, but I can't find them. Could you please advice me other models of headphones that work well with the interface? Many many thanks!

[@wwtws]

did you manage to choose the right headphones? i was wondering the same and would like to know if you have figured it out. i've been searching for months now...

[@cristianturcan7659]

​@@wwtwsdid you find out about the headphones ?

[@wwtws]

@@cristianturcan7659 non really. i've tried the 80 ohm beyer dt 770 pros and found out that my presonus did power them enough. however, I then bought 48 ohm ones because I liked the sound waaaay more and on top of that they did not need to be powered by external devices such as my presonus. I hope I have helped you at least a bit ✌🏻

[@gabrieloalgo]

Dude how do you get thos graphs with the dynamic response on high and low gain?... New sub here.

[@menasafwat4951]

Hi @Julian Krause thanks for videos , what do u think about the 250 Ohm headphones , will the Presonus Studio 24c drive it and get the full headphone great sound or not ?

[@bautistaf5278]

Hi, i have the same doubt, did you tested this??

[@wwtws]

some news about it? pleeease

@Julian Krause, thank you for your very useful videos, can you mae a review of the Presonus 1810c please!!!?

[@attilapigler9013]

Hey Julian, Could you review for us the IK Multimedia AXE I/O Solo? Unfortunately lots of manufacturers doesn't provide enough informations about headphone amp performance. :(

[@bastianmaze_beats8730]

Hi, thanks for your videos. It would be great if you get the chance to do a review on the Focusrite Clarett 2pre usb. Thank you.

[@gauravyn]

@juliankrause - Would you review the Presonus Revelator ? I need something I can use long-term for music production and am confused between the Motu M2 and the Revelator now when I see it. None of the reviews talk about in depth features and specifications like youve covered so far.

[@hitmakerstudio6405]

Hi Julian! Is this the same interface building in the iostation 24c from Presonus? You are the best Man love your channel very much.. peace!

[@vikxie]

Thank you very much for the review. The sound card seems quite dull compare to the Motu M2 you did a while ago. Thank you because it made clearer my decision. Congratulations for you channel ✌✌

[@eddmtz4028]

And What was your decision?

[@vikxie]

@@eddmtz4028 Motu

[@RADERFPV]

@@vikxie Do you like it? Is still holding up strong for you?

[@vikxie]

Absolutly amazing Motu M2 Thank you man

[@RADERFPV]

@@vikxie Awesome, thank you so much.

[@dmitriijustnow770]

julian please make a video tutorial on how to make speaker impedance measurements with usb audio card and REW ... How to assemble an attenuator if the microphone input is XLR ....

[@pacorik]

For a guitarist that use programs like Amplitube and Bias FX which of the two cards is better between this and Focusrite 2i2? another question, but the Presonus c24 doesn't have the Line button, how do you go from mic input to instrument and line?

[@monmol11]

this is what a review looks like - excellent!

[@TheOCDCreates]

Hello, I have this interface working with a brand new Dell XPS 15 9500 and I am experiencing some pops and cracks etc any suggestions on that please?

[@davidnollmusic363]

Thank you so much for your very helpful video. Well done! I'm using Sennheiser HD 650 headphones which have an impedance of 300 ohms. Wondering if using a separate headphone amplifier would make any difference in regard to the frequency shift issue?

[@kevc6115]

Hi Julian! Is there any possibility you could do a series of reviews on 8 channel audio interfaces such as Focusrite 18i20 3rd gen vs Presonus 1824c and so on. Your reviews are the best onine by a golden mile! Extremely thorough with something for everyone including the geeks 😂

[@giemmi76]

Hi Julian very nice! Among iostation 24c and this one there is sonic pre difference?

[@alessiomolteni]

I got the Studio 26c today, I’ve measured the RTL with the RTL Utility and an analog loop, I got 9,89ms at 48khz 128 samples, both on my laptop which has intel i7-1265u and on my desktop which has Ryzen 5900x, both 32GB RAM. Amazing!! I don’t know what is the impedance of the headphone out, I’ll check how to measure it in case. Which are the headphones you suggested with the 24c? Sennheiser HD58x (I’ve seen they have 150ohm impedance)?? I didn’t get them exactly in the video…

[@santiagogodoy7241]

Best Review EVER!!

[@inrichpods]

I own 24c. Is it possible to have a different signal through the headphone jack than the main . Would be good for live performance and practicing for live. Could PreSonus do this in an update?

[@newreignent7213]

Hey Julian what’s the best mic and headphones to use with the 24c in your opinion

[@Soloist1983]

Please review the Tascam 208i or 102i :) Seriously, NOBODY does reviews this good, thanks!

[@HenJayMusic]

👏 Yaayyy Julian you finally reviewed the PreSonus Studio audio interface 😁 (even though I wish you would of reviewed the 26c 😔, it has a 80dB of gain 😏)... 😮 Wow! I thought the output of the interface was the flattest I ever heard, but from your review I can tell I've been fooled by PreSonus 😂... I guess I either have to jump on the Focusrite or SSL band wagon then for true flat output 🤓. Thank you for revealing the truth to us Julian 😁. I've definitely subscribing to your channel now 😁... #GodBless you my brother ✊😎

[@b1j]

Knowledgeable review. I’d like to see you compare this to the AudioBox USB 96. Is there really an advantage to moving to USB-C?

[@JulianKrause]

Hey, I have made a review about the AudioBox USB 96 and it is considerably worse than the Studio 24c. But this has nothing to do with the USB-C. With most audio interfaces you don't really gain anything with USB-C aside from that it's a more universal connector.

[@HowYouMove]

I'm just starting out & I got a 2012 MacBook pro with 512 GB SSD a i7 Processor and 16GB memory & I just ordered the new M-Audio Oxygen Pro 49 Key Controller. And my question is have you tried out the mini ports? & will it work well with the free Mac software be GarageBand and the free Sampler called TX16Wx??? & does the mic 🎤 pre amps put out a better quality gain then the Focusrite Scarlett 3rd Generation interfaces? I do like the specs on the Motu MK2 I hope that you can help me make the right choice cause I'm thinking about getting me the $80.00 Samson C01 Large Diaphragm Condenser mic 🎙️ to start out with

[@BMFS]

Please, review PreSonus Studio 68c

[@davidfuller581]

Seconded.

[@arkada]

4th

[@irawankusuma]

5 🖐️

[@generalawareness101]

68c is not as good, in a lot of specs, as the 26c.

[@yeauld]

@@generalawareness101 You are right, 26C is better

[@renixedbymust]

finally :) danke dir

[@dawoud8013]

Thank you for the test. If you can get one like with the 68C with XMAX ( XMAX-L on the 24C) it would be great to know about ? and quality of converters facing Motu M2 and SSL 2. Thank you again for the work !

[@majdkhattar]

Hello ✋🏻 .. Please which audio interface is more pro. to buy (tascam 2x2hr - presonus studio 24c - audient id4 mkii or motu M2) note: i have a rode nt1a mic Regards

[@jcpuga]

The studio 24c has a warmth that I haven’t heard in the other ones you mentioned. I think that’ll pair up beautifully with an NT1 🤓

[@Puttyankit11music]

Great...😍😍 video value... But 1 thing to say its seems that i am watching this video on playback speed 0.75x 😁😂.,... Its seem very slow n Quite Relaxing Review 😍... Very good Thnku.. I have came for pre 24c only.. N now i will buy for my Recordings .... Love.. From india dhaneyawad🙏🙌🏾

[@deanc2000]

Which is more valuable, high dynamic range for pre-amps, or low EIN? M-audio air 192/4 has an average/decent dynamic range but very low EIN, while EVO-4 has a very high dynamic range, but an OK EIN. In the music recording/production context, which one would be more valuable? Thanks.

[@jadanoliver6237]

I am happy with mine and only wish I had the money to upgrade to the multichannel units. I am using presonus small monitors and they sound good to my ears though I would like hefty ones instead. I have smaller fingers so the 24c front panel isn't a problem for me but I can see where it would be for someone else. Over all I have had good luck with Presonus and this kicks ass compared to my old firewire 410. and the virtual ins are great.