Recording in Studio One Made Easy: Recording Bass

In this video series, David Vignola of Home Recording Made Easy and Mixing Made Easy takes you through everything you need to know to get started recording fast with Studio One Prime, Artist, or Professional. David is a professional audio mixing engineer who has worked with hundreds of artists all over the world, helping them bring their art to the world. As an educator, David's main focus is on the beginner/intermediate recording musician and aspiring audio engineer.
Get more great videos:
kzbin.info
kzbin.info
Check out more courses:
www.homerecordingmadeeasy.com
www.mixingmadeeasy.net
www.mixingmusicanalog.com
Connect with David:
homerecordingmadeeasy
homerecordingma
homerecordingmadeeasy

[@anakinsky9]

Which version of Studio One are you using? I am trying to record for the very first time I am partially sighted and I am not seeing what I my version that you show on yours

[@b1j]

No Zats Basser in Ampire in Studio One 5, July 2, 2021.

[@idw357]

Does Studio One have an Octaver effect, so that I can play bass notes from my guitar?

[@gazaini]

hay, what about make it flow for home recording of doing mixing, is there any rule requirement for make a song on daw, like firt record guitar than drum, keyboard, which one is better for the instrumental flow for mixing guide to create song

[@toffeeriot4219]

Hello. I have Artist. I'm guessing it doesn't have the bass amps in Ampire. (I've certainly never stumbled across them).

[@paul74432]

Great video, very helpful and all, thanks.........but yeh, the clipping thing?

[@daviddogvane]

Thank you.

[@RM-xd6ke]

Useful vid, nice shorts

[@meanthemaw]

Hey brand spanking new user. Ch1 doesn't even show up for me. I just have input L and input R when I go to make a new track. Anybody know what I'm missing?

[@gameslappers]

you have it in stereo mode set it to mono

[@rickeguitar9086]

Hi Dave, I am hearing a dual mix in my headset where it is a blend between the Ampire & clean together. How can i remove the dry unprocessed signal from the audio when using Ampire as my VST?

[@IguanoTwix6942]

Your interface might have a software that has the raw signal unmuted. make sure you mute that input

[@cptncanela]

Same happens to me

[@edwinrivera3794]

Hi David , iam a Bass Player and i want to know how i can import a song in my studio one and eliminate or disable the bass to practice with my bass ,thanks

[@nickheymann5517]

You could High Pass the Track with an EQ

[@nickheymann5517]

You won't get everything out without killing the Kick (unless it's veeery clicky), but maybe it's better than full bass :)

[@dantreview4698]

Try using the app Moises on your phone. It won't isolate the actual bass track used in the mix, but it does strip bass frequencies out of a recording. From there you can export the bass-less mix into your DAW, then record your own bassline into it. Keep in mind that because it's only pulling out low frequencies, any bass guitar note played above like a D3 will not get stripped out, so for example bass solos played way up on the neck will still be there. Also it doesn't work that well for slapping and popping because that technique has a lot of percussive tones in it, and the app won't pull out some of those frequencies either.

[@edwinrivera3794]

Thanks so much !!!

[@tommyvvirs1731]

When I play along with a song with the monitor button pressed for the track I get lots of Latency? I have it set at 256, not sure how to rectify this cause would like to use plugins on a track while recording. 😎

[@nelsonrezek4690]

Try lowering the buffer to 128 instead of 256 You shouldn’t have any noticeable latency (it’s around 5ms of latency) with that setting.

[@ALBERTOGARCIA-nk9bo]

The cable from the instrument has TRS tip and the other end is XLR, I think the video should begin explaining that.

[@RM-xd6ke]

ALBERTO GARCIA probably just a DI box

[@PNWGuitar]

No video on vocals?

[@daviddogvane]

I'm waiting on that too. Anxiously. Dave's the best.

[@anakinsky9]

My input only has L & 5. Not 1 or 2!? Any idea why ir a fux?

[@gameslappers]

your in stereo put it in mono and you'll have 1 and 2

[@pauljrogers]

Great video. Thank you :-)

[@corrindion]

wonderful presentation.

[@redwatch1100]

Not seeing Zats Basser anymore, Dave.

[@longdongbongchong]

Yeah, gone for me too and the plug in looks wayy different. Granted this is an older video.

[@cayceburks8854]

Not trying to troll, because I think you do an excellent job explaining things, but why are you not addressing the clipping that is occurring? And in a time of digital recording, why try to encourage recording at such high input gain levels?

[@chrisrauser6896]

Totally agree, great video, but just always clicking away the red numbers occurring, which signify the clipping?!, without sayin anything about them, was weird. Unless I misunderstood something. And probably we are just saying here what a lot of people were thinking ;)

[@brandonbarnes4058]

@@chrisrauser6896 i think he was clearing out the clipping indicator because he knew the bass track was causing the clipping so he'd clear it, adjust the bass level down, & see if it still clipped. I agree it would've been helpful if he'd addressed this though.

[@paul74432]

@@brandonbarnes4058 Thing is, it's no good trying to get rid of the clipping once you've recorded the track 'cos you've already recorded the clipping!

[@brandonbarnes4058]

@@paul74432 The bass di track isn't what's clipping. The master bus is. If you watch the level on the bass track while he's recording it, you'll see it doesn't clip at all.

[@fret2fret221]

His faders are just too high. He’s just recording raw tracks at the moment. When it comes to mixing he should be turning down the faders and then the clipping will go away.

[@BROSCroMusic]

Bed Bass 😮‍💨

[@ewrwrasggre4151]

this just works if you pay for artist. or you dont get presets for bass