Pressing EVERY Heat Transfer | HTVRont Autopress 2

Рет қаралды 2,068

Күн бұрын

Пікірлер: 51

@NekoPrints 2 ай бұрын

Updated: Mario60 no longer works (Sorry!) but you can still Save $55 off your HTVRont Autopress 2 Digit using the new code and my affiliate link: HoneyA55 shrsl.com/4qg7q

@Salialto Ай бұрын

Code isn't working for me. :(

@jessa7128 Ай бұрын

Code did not work for me either

@NekoPrints Ай бұрын

@jessa7128 I know I'm so sorry I'm in contact with htvront to get it fixed hopefully by tomorrow!

@villy4083 27 күн бұрын

@@NekoPrints it works, but its only 30 off now

@someguy8914 4 күн бұрын

Ordering my first one this weekend thanks for the vid u definitely helped them get a sale

@NekoPrints Күн бұрын

You'll love it! Remember if you use the code and my link you'll get a discount!

@nahnisjourney1406 2 ай бұрын

It’ll be my very first auto heat press. I’m excited about it!

@NekoPrints 2 ай бұрын

@@nahnisjourney1406 you're gonna love it! I definitely do!

@botanicalwaters Ай бұрын

I wish they would let us trade up our original HTVRONT auto press, lol! Lots of money down the drain because of the poor pressure. Can’t handle white toner or things with high pressure. Glad this one seems better. Thanks, Neko!

@NekoPrints Ай бұрын

Someone else mentioned that on IG. That sounds like a great idea! I'll let the rep know. It'd be really cool if they implement something like that.

@RepentOfyourSins Ай бұрын

Like cellphones. I agree. I brought mine, and then a week later, this model came out. I was pissed because I didn't know this was coming out.

@steviesteve1716 8 күн бұрын

Hello and thank you for the video just one more question and I will be buying have you tried the marriage between the A and the b for white toner yet

@NekoPrints 8 күн бұрын

I have and it works! It could use a bit more pressure to be honest. But i did work and press on the garment without a problem

@Jayden.Playss 11 күн бұрын

Just bought one of these, had a question which media type transfer is more cost effective to start with from high to low ?

@NekoPrints 9 күн бұрын

That's really dependent on a lot of factors. But on average for smaller orders I go with HTV or DTF transfers and large orders screen print transfers.

@astracannon87 Ай бұрын

Have you done a wash test with dtf? Thats the truth to if it works or not

@sazzics Ай бұрын

I second this! Really the defining point as to if I’m gonna buy it or not

@NekoPrints Ай бұрын

I have! I'll make a video on the wash test for you 🙂

@NekoPrints Ай бұрын

I got you!

@AthenasJourni Ай бұрын

Have you had the chance to marry the white toner sheets with this heat press yet? I have a white toner as well and I’m excited to give it a try and hope that it works. I’m just not sure if it will be enough pressure.

@NekoPrints Ай бұрын

I've done it and it works! I'll make a video soon on it :)

@AthenasJourni Ай бұрын

@ Ohhh this will definitely be a game changer. I can’t wait to see this.

@luv2sew247 2 ай бұрын

Thank you for doing the pressure test on various products especially the screen print transfer. I watched several videos and your demonstration was the reason why I got it using your affiliation code. I know 3D puff will be a work in process. I will be trying it out using a cutting board and silicone pad and will let you know how it works. Thank you!🙏🏾

@NekoPrints Ай бұрын

Glad I could help! Thanks so much for watching. I'm sure it Will work just fine 👌 keep me updated!

@Gonz333 7 күн бұрын

Hi, I hope you could answer my question before I buy this machine. I had the original htvront heat press and after some adjustments I was able to press screen printed designs, but the design started cracking after the first wear. So my question is, how did the screen printed design hold up? Did it crack? Does it still look good after washing?

@NekoPrints 7 күн бұрын

So far so good! I always give it a second press which I believe helps a ton. But it's worked way better than the first version. Remember you can use the code HONEYA55 when you use my link for a discount 😊

@Gonz333 7 күн бұрын

@ Thank you!

@nahnisjourney1406 2 ай бұрын

I’m awaiting the arrival of my new HTVRONT Auto Press 2 Digit. I originally ordered the Daisy White, but I contacted them and requested a color change to the pretty Purple.

@NekoPrints 2 ай бұрын

@@nahnisjourney1406 I wanted the blue but figured I'd get tired of the color fast. I like basic white or black 😅

@nahnisjourney1406 2 ай бұрын

@ If they don’t change the color to the purple one, I’ll be fine with the Daisy White. I never wanted my equipment to look like toys, but I really like the purple color one. My swing away press is black with red accents, and my clamshell press is white. Thanks for doing the review, and letting me know that I will love it. Note: I get a good puff press at 284 F for 10 seconds. But make sure that ALL of the moisture is out of garment before pressing it. And sometimes, it takes a second press to get all the crinkles out of the puff. Cut some 1 inch squares to test press on that same shirt, but press it again to see how it looks after a second… or even a third press will look. But only after all moisture has been removed.

@maryjamerson 2 ай бұрын

I don't really NEED a 4th heat press but....I like this one!

@NekoPrints 2 ай бұрын

@@maryjamerson 😂😂 I totally feel you on this! It's one those "I don't NEED it but....." purchases 🤣 treat yoself!

@maryjamerson 2 ай бұрын

@@NekoPrints I'm going to watch and listen to your review one more time...Let's see if I order it lol

@NekoPrints 2 ай бұрын

@maryjamerson well you have till the 15th to save $60! Afterwards back to retail price lol. It's a good press to be honest. But if you have working ones already that get the job done, then it's not necessary. Just make sure it's the right investment 🙂

@maryjamerson 2 ай бұрын

@@NekoPrints I do have a press that works very well, but my issue is that it takes about 30 minutes to get to temperature and I can't use the heat press and anything else in the room while it's on. It literally flips the breaker and shuts the entire room down. The new Auto Press 2 looks great and it looks like it heats up very quickly and doesn't cause electrical fires :)

@NekoPrints 2 ай бұрын

@maryjamerson ohhhh definitely! That's actually how I use it. I use my big press that also takes 30 Mins to heat up, for big orders. And for quick and single orders I use this one

@tben5962 Ай бұрын

I just got mine today to do DTF transfers. The transfers were from Ninja Transfers and didn't work. I tried with both a sweatshirt and a tshirt using the heat and time instructions provided for the Ninja transfers and the heaviest pressure. I pressed 3x with the auto press and then had to use my Cricut easypress mini to get them to stick so I could peel. Very disappointed. I actually found this video trying to figure out if I did something wrong or it's the press. Considering it worked with the mini iron, I don't think the transfer was the problem.

@NekoPrints Ай бұрын

That’s odd, I pressed ninja transfers with these a few times. The cold peel ones or new hot peel? I haven’t tried the new ones yet

@MyLucaBela Ай бұрын

@@NekoPrintsit’s supposed to peel hot or cold. It says Ninja Easy Peel Technology- hot, cold, fast, or slow.

@NekoPrints Ай бұрын

I would try with different settings and maybe cold peel. I haven’t had issues with dtf or screen print which usually require heavier pressure

@mdudester Ай бұрын

coupon doesznt work mario60

@NekoPrints Ай бұрын

@@mdudester I know I'm so sorry. Try using honeya55 in combination with my link. It'll get you $55 off 🙂 I'm working on getting my Mario60 code fixed.