Prevent this Common Manometer Mistake

Learn how to prevent this Common Manometer Mistake. Techs often have confusion over what is displayed on a Manometer Screen. In this short vid Bryan explains the different measurements on it.
Read all the tech tips, take the quizzes
and find our handy calculators at www.hvacrschool.com

[@duramusmosley5530]

Outstanding information. I have been using my monometer a lot this winter and this is very useful information to have. Thanks.

[@johnson554671]

It took me two times to watch it, but the explaination really clicked after watching on the second time. Thanks for the video!

[@bikerbobcat]

I only really started using one this year and this video is super helpful making sure I'm doing it right. The pressure switch test feature is great too. I like showing customers the readings. I can say "This is what it SHOULD be. This is what it IS. That's how I know it needs replacing." It's not personal.

[@brianmcdermott1718]

Great demonstration of how the meter works. Thanks.

[@CouchDad09]

Just orderd on yesterday, for years I've used the Yellw Jacket 78060 on commercial food equipment and commercial HVAC with a Meter . Thanks for the training Happy Holidays

[@scottycombs3974]

the simplest things are so easily overlooked and misunderstood ... thank you for this simple video

[@aaronstark1776]

The differential reading may be important with gas valves in some cases. For instance we may need the inlet pressure to be 1.5"WC minimum above manifold pressure for the gas valve to regulate properly. So without the proper differential the manifold pressure drops.

[@channelcatchaser9426]

Ole Bert couldn't have done a video any better! Long live Bert! Great video guys

[@treyconner1991]

Excellent video! Thank you!

[@HN-bn6vv]

Helpful video! Thank you!

[@moeselec]

Thanks for Tip. If you could show us how to used it when you have to use the combustion chamber as reference would be very appreciated .Thanks again.😊

[@bill944]

Good information Bryan. I've found, in most cases, that technicians are getting incorrect information because they failed to read the instructions for their meters/electronics and assumed that they knew how to operate them properly. Unfortunately, even senior techs.

[@HVACRCERTIFIEDTRAINING]

Thanks,nice topic

[@ATeamAdam]

Great video....

[@HVACRCERTIFIEDTRAINING]

Static pressure testing ensures if the equipment is operating within factory specifications

[@madeinusa1576]

Why is that when checking static on ...say trane ... it’s to isolate the blower to get the right wc?

[@stevealoia]

Why is it . When I press the power button. I get a prgd -short for program I think . on the screen I’m not sure what it is . Thankntou

[@victork3397]

I have the same manometer. It seems like the reference point to atmospheric changes, so it throws the measurement off. I have to pinch the tube disconnect it and zero it out to atmospheric again. It seems like the measurement wanders. I’m wondering if my manometer is just faulty or if they’re just all like that?

[@tomobomo9806]

Do you know my reading pressures are not stabilize?

[@Jonesy1978]

This video is for the techs who cannot read the manual that comes with the manometer

[@RockoRocko-rz7kx]

Ya so

[@Mik-mk8us]

What instructions. PSS after 27 years

[@swank1975]

Do doo de-do-do de-do-do de-do-do de-do-do-doodle do do do-doo do! Do do do do do de do do do do do do do do do. Mahna Mahna Do doo be-do-do ~every time I say Manometer

[@lsteiner]

Crap. Now I'll be doing that for the rest of my life. Thanks a lot pal.