Thanks so much...again...for your thoughtful and thorough videos Keith. So easy to follow you.
@KeithCooper Жыл бұрын
Thanks!
@G.Menounos Жыл бұрын
Another one excellent video Keith... Every time we learn something new from you. ❤️ Thank you!
@KeithCooper Жыл бұрын
Thanks!
@ArmbrusterCompany Жыл бұрын
Very helpful. Love your sequence of adjustments and prints to illustrate the points in the video. Thanks
@KeithCooper Жыл бұрын
Thanks - glad it was clear what I was trying to do! ;-)
@peterb8606 Жыл бұрын
Thanks Keith.
@KeithCooper Жыл бұрын
Glad it was of interest!
@robertsimpson1729 Жыл бұрын
Excellent video, thank you
@KeithCooper Жыл бұрын
Glad it was of interest!
@josephsworkshop75 Жыл бұрын
Another good video Keith. Thanks.
@KeithCooper Жыл бұрын
Thanks
@eoslove2022 Жыл бұрын
Thank you for this! We have recently discovered metallic papers and the colour 'pop' that is possible. With the PS adjustments you've outlined, our Canon Pro 100 will produce spectacular renditions of our most colourful images. Here in Canada, we use MOAB Slickrock Metallic Pearl on a 17" roll cut in-house to 13"x19".
@KeithCooper Жыл бұрын
Thanks - the right images work very well
@danielvoulkos8274 Жыл бұрын
Eos. Have you tried RR metallic? And what do you think of it. I may have to give the MOAB a shot. Down here in Montana from you.
@eoslove2022 Жыл бұрын
@@danielvoulkos8274 no distributor up here,,,too costly to ship RR
@perroh Жыл бұрын
Amazing as always
@KeithCooper Жыл бұрын
Thanks!
@bobkent6075 Жыл бұрын
Great Video, shows that printing good images isn't just the case of clicking the print button. 🙂I will need more ink and paper!
@KeithCooper Жыл бұрын
Thanks. My excuse is that it can save wasting ink and paper in the long run ;-) :-)
@simonpayne7994 Жыл бұрын
Really useful information on the limitations of prints. I will definitely get hold of some metallic paper. One of the problems I often encounter is that fully saturated colors come out duller and darker when printed. This is most noticeable when I have put some text onto the image. On the monitor you might be half blinded by brightly radiating green text on a black background, on the print you ask yourself where all the text has gone. 😁
@KeithCooper Жыл бұрын
Ah, coloured text is tricky - people often choose settings which play to the advantages of a screen, whilst print has a completely different range of 'strong' colours Design for print not screen ;-)
@TheDaniel5677 Жыл бұрын
Excellent !
@KeithCooper Жыл бұрын
Thank you
@ZeeKay80 Жыл бұрын
Keith thank you for this content!! You broke it down beautifully in layman terms. I was hungry the moment you pulled that picture on the screen 😊 Keith I use a lab to print large prints and do not own a printer that can handle the sizes (like 20’ x 30’ for example). I am wondering how would I go about processing my images so that I can get accurate color on the final prints. Can you, maybe, make a video on this topic. Thanks in advance!!
@KeithCooper Жыл бұрын
Glad you enjoyed it! I've not any specific experience of using a print service, but I may well be looking at this next year. My feeling is that any high end service will go to some lengths to cover issues like this.
@ddsdss256 Жыл бұрын
Do you ever print a black (or grey) border? That would allow the use of one mat rather than the common double window. It may not be as "fancy" but perhaps could work in some situations (maybe for small prints). Also, it's interesting how in another (great) recent video about chasing perfection showed the folly of that, yet as you often show, getting the print right (="perfect?") is often a daunting task--so many variables and experienced-based (read: "paper- and ink-intensive") decisions.
@KeithCooper Жыл бұрын
I've seen it done, but it never appealed for any images - I don't frame small prints very often. I normally use a single mat anyway if I'm cutting them myself for bigger (A2 and above) prints.
@ddsdss256 Жыл бұрын
@@KeithCooper Yeah, I printed a grey border once using Epson Print Layout and it looked a bit weird. Obviously it depends on the image but so often it seems that double-matting with a black inner window really helps (especially B&W with burned-down edges/vignetting). I framed some of my paintings and generally used a black "border strip" within a light wood frame (1/4" thickness for each) and that looks great without being distracting. It does of course consume more materials, however. I've been contemplating getting a nice mat cutter but I'm still on the fence (hassle vs. expense). Presentation is so important (as is display lighting). That would be an interesting video subject--I've seen some step-by-steps but they were more instructional and didn't really go into the philosophy behind various methods (matting vs. dry mount, glass or no glass, etc.).
@KeithCooper Жыл бұрын
Good points - However, I don't really do enough mounting/framing for any useful contribution in this area I'm afraid. Also supplies vary considerably in different countries
@jamesk1619 Жыл бұрын
First, let me say your videos have been very helpful in choosing a new printer. However, there is one question I can't seem to find an answer for. If the printer runs out of ink mid print, what happens after you replace the ink cartridge? Can you resume the print or is it automatically cancelled and needs to be reprinted from the beginning? TIA.
@KeithCooper Жыл бұрын
Ah, it depends... Some larger printers do support live swapping, but in general, even if you replace the cart fast enough, the pause can cause a slight change in the surface 'look' on gloss/lustre papers. It's something I do mention in some of my written reviews, but it depends on just how things go when I'm doing the testing ;-)
@Fundytidez Жыл бұрын
Hi Keith, a Maritime welcome from Nova Scotia! I have been following your channel for about 6 months, and have a Pro-200. The printer works great and the pictures look super on most papers as well. I've been using the A3 plus Pro Luster lately and like the results. The problem I have is when hanging the prints in mats and frames. I use two little pieces to hang the prints at the top, so it will hang naturally. After two to three months the paper starts to warp and bubble under the mat. Has anyone else encountered this problem? It really seems to be a problem under direct lighting for days on end. I have even started hanging the pictures with just one piece of tape in the center hoping to keep the wrinkles out. I'm thinking of going with a heavier paper, but like the results of Pro Luster. Would you have any suggestions? I do seascapes and like the color shots for sure!
@KeithCooper Жыл бұрын
Yes - heavier paper is a good idea, but care with lighting is needed with some papers.
@Fundytidez Жыл бұрын
@@KeithCooper Thank you Keith, for your insight. The grand experiment continues. :-))
@danielvoulkos8274 Жыл бұрын
Possibly high humidity in your air.
@adrianfrench9921 Жыл бұрын
Keith, great informative content thankyou. I however am having issues with my prints always turning out much darker and colours being off from what is in my screen. I.e bright blue skies are almost night like. My laptop screen is calibrated and I've also created a paper profile for the paper used. (Prints are better if I select managed by printer but not perfect) I'm using an Epson L1800 printer with kodak ultra premium glossy paper. I know the paper isn't the best but it seems to be the only brand I can easily obtain here in Saudi Arabia. I'm guessing it's user error as I am new to printing. Any advice would be greatly appreciated.
@KeithCooper Жыл бұрын
Sounds a bit like a double profile application However you give no info about what software, or system you are using so I can add no more... ;-) I've never used an L1800 [AFAIK - not a UK model]
@adrianfrench9921 Жыл бұрын
@Keith Cooper thankyou for your swift response, I'm printing via lightrooms print module on windows. I'm almost certain I am switching off colour management when using an icc profile for the paper.
@KeithCooper Жыл бұрын
Can't help there I'm afraid. I don't ever use Lightroom and have not used a win PC this century... I'd suggest asking on the printing forum at DPReview.com
@ytuberization Жыл бұрын
Seeing the paper: There is a set of new Permajet “Heritage” papers coming in the next weeks. Maybe a chance for an evaluation by a real expert…😊
@KeithCooper Жыл бұрын
It just so happens I have four of them here to test - the A3+ sheets were also in that box of Titanium Gloss I had in the video. I have some A2 sheets as well. This will likely be in a few weeks, once I've some new photos with the GFX100S and assorted lenses which also turned up yesterday ;-)
@ytuberization Жыл бұрын
@@KeithCooper Haha, that’s much faster than I expected. Looking forward to these interesting reviews! Thanks 🙏
@KeithCooper Жыл бұрын
It does depend a bit on the weather and me going out to take photos ;-)
@ZeeKay80 Жыл бұрын
Keith you can always go back to get another lunch :)
@KeithCooper Жыл бұрын
@@ZeeKay80 That bakery/cafe is unfortunately not there, but I'm sure I'll find something ;-)
@markflanagan521 Жыл бұрын
Very helpful information as always Keith. just a quick Question if i may about the epson ET8550, it has built in profiles for epson papers and a menu of adjustments in the epson software when linked to ones computer for various final preparation for printing, are they worth going along with for learning experience as i have received the printer but won't have time to use it for a couple of weeks, ink is still in the bottles awaiting set up, best regards
@KeithCooper Жыл бұрын
Thanks The 8550 has no 'built-in' profiles. There are some profiles installed on your computer when installing the software/driver. There are no 'adjustments' in the driver for better quality printing - there is a B&W mode I'd suggest starting here - it has links to all of my 8550 articles/videos/review www.northlight-images.co.uk/epson-et-8550-printer-review/ I' normally suggest to start off using Epson Print Layout - free and very useful.