Tutorial of professional alloy wheel refurbishment 2nd year of university project (Worcester)
Пікірлер: 245
@CVM222VOLT4 жыл бұрын
It is always so rewarding to watch a skilled craftsman work his magic.
@johnyOld775 жыл бұрын
at min 6:32 what gun are you using ? and what kind of coating are you using ? thank you !
@Fizzbomb1234 жыл бұрын
Amazing video that explains the whole refurbishment process clearly.
@williamwright63825 жыл бұрын
Brilliant job need my S8 Audi doing i live in Liverpool any ideas were too take the car too have the wheels done THANKS
@lukenukem11649 жыл бұрын
nice work mate. do you apply the silver to the barrel or just leave it in primer?
@sabaumarius51948 жыл бұрын
What is the chemical you use to strip wheels?
@michaelrobertson52075 жыл бұрын
Does the powder lay on top and you skim if off similar to wet paint? Never seen powder applied in a waterfall booth before this video.
@tresjolieme814 жыл бұрын
Getting my Caddi wheels refurbished to hypersilver at Detriot Wheel and Tire, I hope they do a good as a job.
@deeg45995 жыл бұрын
Does that water get recycled or to the drain?
@jewelzmontalvo84445 жыл бұрын
where in Worcester at you located/
@robertstamp2409 Жыл бұрын
What a cracking job ya did there, very interesting to see how it’s done step by step 👍👍👍
@jawzmuzik56286 жыл бұрын
the only video where someone shows this step by step without any bullshit
@titan69935 жыл бұрын
where are they located and how much for a 21 inch wheel
@tkskagen5 жыл бұрын
Do you have any "recommendations" for Powder Coating preperations? Thanks!, -Thomas Port Orchard, Washington
@mako0404725 жыл бұрын
Yes the recomendation is learn how to do it and dont ask stupid questions in you tube
@tkskagen5 жыл бұрын
@@mako040472 I wasn't asking YOU 4Q!
@joapps81355 жыл бұрын
Cool. But no torque wrench on the lug nuts?
@UltralydvaskingLillehammer4 жыл бұрын
abs. mandatory on modern cars !!
@joapps81354 жыл бұрын
Most r not aware that incorrectly torqued lug nuts => warps rotors => steering wheel shakes when braking. BUT torque wrenches r sensitive to support hand placement (or lack of) wrt BOTH hands... keep free hand on socket head to support n maintain a consistent 90 degree angle (tests show how movement can affect the applied torque) and keep hand on grip at consistent spot (where u grab can dramatically affect torque...think leverage). also, if a lug nut is over tightened with your impact gun and then u finish off w the torque wrench as u did, the lug nut will of course be overtightened -- if it clicks without any turn, then do over. other critical tips: -do not loosen lugs ever with a torque wrench. use a normal socket wrench -completely loosen torque wrench to lowest torque setting and then tighten to highest setting 3X (yes, 3 times!) before each use -loosen torque wrench to lowest setting when storing -do not use cheap torque wrenches which can be inconsistent -chock wheels to minimize vehicle movement as u torque -tune torque wrench as recommended by mfgr -etc
@houdini1785 жыл бұрын
Great video... a true Subject Matter Expert!!
@Czechbound5 жыл бұрын
Question : For safety, why is the torque not checked on the wheel nuts before driving ?
@mako0404725 жыл бұрын
Because he dont give a shit about the costumer just repair the rim
@loyalty7864 жыл бұрын
Hi sorry to bother you great video this might be a stupid question can you tel me whats the music called in the back ground
@Clunk495 жыл бұрын
So lacquer is better than clear polyurethane? TIA
@douglasfernandez79965 жыл бұрын
Nice to see that you primed the wheels before powder coating.
@icarr1212774 жыл бұрын
The primer is powder coating, the color is spray paint
@ivelinhristov61992 жыл бұрын
Hello what is the RAL color you use?
@balasuriyage4 жыл бұрын
hello, mate what is your postcode?
@amana14805 жыл бұрын
Where are you based
@peett44575 жыл бұрын
What was the cost in US dollars ?
@BarryBethal-yv2oz5 жыл бұрын
What a splendid job you done buddy, see ya next year when the wheels have been curbed again
@johncooper72425 жыл бұрын
brilliant tutorial excellent welding and attention to detail is superb .Such a shame about the stupid extremely irritating loud noise in the background forcing me to keep turning the sound up and down .
@abudabidibibudi5 жыл бұрын
wowowow you are a doctor!! where are you from?? big respect fom MONTENEGRO MNE :)
@matinh57113 жыл бұрын
how much does this cost for a full set of 19 inch wheels
@omarti31845 жыл бұрын
Awesome job & Cool music.
@romulo184 жыл бұрын
Hi, What product do you use to remove the powder coating?
@armandoreyes67304 жыл бұрын
It's somebody outside their know what is The chemical in the tank . He's using. Please email at armado60@gmail.com
@euanscotland11 ай бұрын
Thanks man. Your efforts are appreciated
@chrisharding57835 жыл бұрын
What would you do if tyre pressure monitor leaked?
@mako0404725 жыл бұрын
Fix ot again until stop leaking or buy another rim and pretend that i fixed it
@jessman10045 жыл бұрын
Perfect job!!
@mea12305 жыл бұрын
do you apply the primer while the wheels still hot?! should you wait them to cool down and the clean them again then ply the primer while they are cold?
@edwinyurigattorno5 жыл бұрын
Not polishing?
@pululo985 жыл бұрын
How much will be a job like this one?
@dimospap6797 жыл бұрын
Definetely a nice professional job.
@machargs1232 жыл бұрын
Do u now do diamond cut ?
@evanubi55 жыл бұрын
What's the cost for 4 18 inches AMG wheels, 2014 model I want my done many thanks.
@user-wy9vf5kq4q5 жыл бұрын
990$
@eduardosampoia54805 жыл бұрын
@@user-wy9vf5kq4q ouch
@MrAli1715 жыл бұрын
Don’t think it will be that price in uk about £200 to £250
@ahoorakia5 жыл бұрын
@@user-wy9vf5kq4q YOU CAN BUY GOOD SET NEW RIMS IN u.s FOR THAT PRICE
@John-dz5dv5 жыл бұрын
Anywhere from £50+ a wheel
@robertousai64605 жыл бұрын
how much ? please...
@icarr1212774 жыл бұрын
Step 7:57 is vital, not only for the safety of losing a wheel, break disc's disperse a lot of heat into your alloy wheels and if that heat carnt escape past the powder coating you will be soon replacing your warped disc's.
@MegaMrbutch3 жыл бұрын
Nice work! Though you forgot to copperslip where the hub and wheel mate. Also please use a torque wrench on wheel nuts. But otherwise nice work!
@abooabdula2215 жыл бұрын
nice work man, congrats
@jc449877 жыл бұрын
Nice work
@lisab33965 жыл бұрын
Any relation to Deepa Takhar?
@NS-wy6dl3 жыл бұрын
Where you based, need mine done ?
@jimwiskus88625 жыл бұрын
Assume you are not in the US?
@johngordon72425 жыл бұрын
Those look nice good job.
@Sheraad1903 жыл бұрын
Where are you located? Can I come by to refurbish my alloys?
@michelnguyen48195 жыл бұрын
How much to refurbish the whole set of 4 wheels?
@mako0404725 жыл бұрын
The amount of 1 times 4
@itzscorpiana19434 жыл бұрын
How much does something like this coast
@maxn89044 жыл бұрын
For awhile probably but it always helps when you're going downhill.
@fester.3 жыл бұрын
how much for that service
@alancraigie79514 жыл бұрын
Very professional job. 👍🏻👍🏻👍🏻👍🏻
@richardwalley28624 жыл бұрын
This is the definition of done the proper way
@romandise5 жыл бұрын
original music by Jeremih dont tell em :)
@MrAkki26264 жыл бұрын
Where are you based ??
@deemdoubleu8 жыл бұрын
Nice work, he left without paying btw ;-)
@eksine6 жыл бұрын
but he gave a thumbs up
@Jocek175 жыл бұрын
nice one hahaha
@MrShanghai345 жыл бұрын
Really!?!?!?! And he parked in a handicap space at that???
@michelnguyen48195 жыл бұрын
Lol, right.
@lavalgrenade59265 жыл бұрын
Dinosaurs
@shawnmartin84855 жыл бұрын
Come to Miami you'd make Bank...
@JoeBlack5402 жыл бұрын
Great job dude 💯
@jif88025 жыл бұрын
Neighborhood shop that knows their stuff, 👍🏼👍🏼
@vinleung82285 жыл бұрын
Where are those guys?
@jumpinjojo5 жыл бұрын
Vincent Leung West Dreyton.
@mic400uk4 жыл бұрын
That's a proper craftsman right there
@michelnguyen48195 жыл бұрын
Basically, what he mean is you can't DIY, you have to pay for someone doing it( and delivery fees) then you got to pay for the mounting and recalibrating the tires including the re-alignment of the car, pretty sure they will convince you to do it since you just payed the price for refurbish your wheels.
@mako0404725 жыл бұрын
Yep
@maddogmcfly55044 жыл бұрын
great job on the wheels, hope your respirator is up to the job tho.
@McElhinney654 жыл бұрын
A nice bit of TIG welding, not an easy process to master.
@josemrodriguez3725 жыл бұрын
Great end results, products and services look great, I hope The lug nuts were torqued, and please consider using Eye protection, in all the processes, so you keep delivering awesome products, remember safety,safety safety Jose Kansas
@The77Game6 жыл бұрын
I don't get the 2 points on why to apply the powder on the hot wheel. To outgas the metal? That's fine, just let the wheel cool down afterwards and it will still be outgassed. And to see how much you put on? If i'm not mistaken you can get a mil guage for powder and even if not, a professional that does this all the time will know how much they put on. On a hot wheel you will lose some of that self levelling ability of the powder.
@johnreynolds22405 жыл бұрын
1) it saves time, no waiting to cool down, less time to get back upto temp 2) powder primers can tend to get a smoother finish hot spraying Just be careful as you can get sags in powder if you not experienced enough
@John-dz5dv5 жыл бұрын
You heat the wheel up because alloy is porrouse your taking out the dampness air and any gases if you let the wheel cool down you could then get the air dampness back in. If you do the wheel cold you would get pin holes where the air dampness gases are coming out.
@ignorthepain5 жыл бұрын
Looked at this and its dangerous not to mention the same price as new. Very hard to balance because the finish is not consistent on the rim.
@65Wonders5 жыл бұрын
joe blow you are afucking tool stfu about what you don’t know to be true ya fucking idiot
@ACobra2892 жыл бұрын
Wow, those wheels look awesome. Great job!
@jacksmith-ok8tx5 жыл бұрын
why is water trickling in 6:05
@stevefromlondon91755 жыл бұрын
catching any over spray
@ianmorgan53082 жыл бұрын
great video
@raghuveermotors955 жыл бұрын
OMG the AMG owner ran away without paying ........☺
@jiakabery35505 жыл бұрын
I repaired my first wheel gouge in 1997. I used JB weld.
@FrustratedBaboon5 жыл бұрын
You're not the sharpest tool in the shed are you ?
@jiakabery35505 жыл бұрын
@@FrustratedBaboon hey fucktard! I have video shit for brains. Just repaired a wheel a few months back. You're too stupid to think JB weld can fill a scratch in a wheel and work? You definitely describing yourself as a dull tool. Fucking Moron.... they fix cracks in Transmissions with JB weld. I'm sure it's gonna work to fix a curb mark on a wheel. You're an embarrassment to shithead comment Makers.
@dspsaab76095 жыл бұрын
Like brand new!
@MSilva-wg8qh5 жыл бұрын
NICE WORK
@f.fernandes47125 жыл бұрын
AMG - All Money Gone
@patrickbruce90025 жыл бұрын
Top job - I like your attention to detail. You have nice set up. What shocks me is the incredible number of nasty comments below. What is wrong with people that they think it is acceptable to be so disrespecful. You know who you are. Why so hateful? The guy is only showcasing his business. Do you go about your daily lives insulting people to their face - I suspect not. Don't get me started on the some of plain incorrect ideas / comments below......
@ralphhoffman16465 жыл бұрын
Could not finish video due to the annoying sound track.
@johnwhodat81355 жыл бұрын
A good craftmanship right there .
@mathushan3265 жыл бұрын
Good work but why did u use a drill to put the lug nuts on u should have used a torque wrench
@Thedataman15 жыл бұрын
That's an impact drill, same thing as a torque wrench.
@mathushan3265 жыл бұрын
It could overtorque the lugnuts and get the lugs stuck in them
@Thedataman15 жыл бұрын
@@mathushan326 The drill has torque settings. Hey take a min and check out Torque drills, there are a lot of companies who make them.
@amana14805 жыл бұрын
10:10 Better to tighten with a calibrated torque wrench, than an impact gun...
@smokegreentree5 жыл бұрын
Impact guns have torque settings....
@amana14805 жыл бұрын
@@smokegreentree Calibrated torque wrenches are the most accurate way to tighten to a specific torque setting, or to make sure you are not damaging the threads of the nut/bolt by overtightening...
@smokegreentree5 жыл бұрын
@@amana1480 it's a wheel not engine or bolts that really matter. You genius you.....that's probably why you buy a torque wrench for the wheels since that's all you can probably work on. Yeah you aren't telling me anything I don't know. Let me guess you are under 25 and you know it all right? ....
@shawnmartin84855 жыл бұрын
Wow...a torque wrench for a tire....if it was a Lamborghini or Ferrari sure but it's just a mid range Benz....
@amana14805 жыл бұрын
@@shawnmartin8485 Doesn't matter what car it's for. When you have experienced what a pain in the ass cross threaded nuts and bolts can be, due to the lazy habit of people using impact guns to TIGHTEN fully, you will always use a torque wrench or hand tool to do the final tightening. The best tyre places I know use a torque wrench on every single car, when tightening bolts or nuts, doesn't matter whether it's a Kia or a Bugatti....
@bftfcfua29465 жыл бұрын
opps!!!!!!!!!!!!!! forgot to torque the nuts with a torque wrench
@darnitproductions59455 жыл бұрын
Looks the same to me
@PREDATOR-ALI5 жыл бұрын
>GOOD JOB
@PanJarekKozera5 жыл бұрын
Beautiful. These ALL COLORS match so much ...
@paratrooper73405 жыл бұрын
"Time for the customer to go back to work at his gas station."
@vaz212125 жыл бұрын
Back to petrol station after the cars been up on bricks for two days in a disabled space while wheels are done
@2326TOM5 жыл бұрын
envy!
@andiman455 жыл бұрын
pumpin gas no doubt
@eksine6 жыл бұрын
seems cheaper to do it yourself with rattle cans or just buy new wheels
@easley4215 жыл бұрын
Go buy a new Mercedes rim from them and tell me if it's cheaper. Even my VW has ridiculous priced parts. Add AMG and hold onto your wallet
@eksine5 жыл бұрын
@@easley421 I always check out eBay and Craig's first. Also I would never be stupid enough to buy Mercedes or any of those brands. I don't throw my money in the garbage
@easley4215 жыл бұрын
@@eksine WTF? AMG is garbage? Some people can afford and appreciate the engineering and development going into these cars. For you to pretend there's no difference is based purely out of spite, jealousy or animosity. Either way I hope you Enjoy your Ebay car parts.
@easley4215 жыл бұрын
@@eksine because when you go to college and take a 'reading' class, you then make enough money to appreciate finer things in life. Next time you see that $70k car don't even look. Remember that's not for people like you and enjoy your poverty stricken life. My tires cost more than your whole car and it makes me smile.
@eksine5 жыл бұрын
@@easley421 I have almost 30k in savings and about equal that in line of credit. Yeah I'm so poor plus you still look like an idiot, nice try
@zigzag71943 жыл бұрын
Great video but it's all industrial. If you had the tools y'd be able to do the same. 👍🏿
@neilhowe26655 жыл бұрын
good video and content but lose that awful noise(music..)
@lorenzobeckmann37365 жыл бұрын
As industrial art I could mount a weld-repaired wheel on the wall of my garaje, BUT NOT ON ANY CAR
@paulrainsford19533 жыл бұрын
You don't need that stupid canned music on your video, the content is good as is.
@icanfartloud5 жыл бұрын
Low profiles created a whole new industry of rim repair......
@alancarter83965 жыл бұрын
Not bad for a tenner a wheel.
@geosutube5 жыл бұрын
Warranty repair.
@sanjuking38363 жыл бұрын
THE CAR IS NOT ON JACKING POINTS. IS IT ???
@mrmanitoba5 жыл бұрын
I'm jealous
@sunilcherianpullockaran88175 жыл бұрын
You are breathing in a lot of carcinogens when applying the various powders and fluids.
@jonedgar59965 жыл бұрын
He is wearing a face mask.
@sunilcherianpullockaran88175 жыл бұрын
@@jonedgar5996 Check out from 6:20 to 6:30 when he is applying sparkle silver. At 6:26 change spelling from spakle to sparkle.