problem airbrush troubleshooting - bubbles in the paint cup explained

Quick access:
0:45 internal mix airbrush and blow-back cap
2:50 3 main reasons for bubbles
4:22 1st reason explained
6:10 2nd reason explained
7:40 why nozzle cracked
9:38 3rd reason and specifics of different nozzle types
Be sure to LIKE, COMMENT & SUBSCRIBE!!!
Online Store: spraygunner.com/
Follow us on Social Media:
📺Instagram: / spraygunner
📘 Facebook: / spraygunner
🎬KZbin: / @spraygunner

[@Sam-oy2zw]

Amazing - so clear and well explained, not only have I fixed my airbrush, but now I understand how it works 😆- thanks!

[@markoharoldoronearmedpoohb7816]

Most problems getting paint out of the Airbrush, is too thick paint + too low air pressure, or clogged nozzle, really not the nozzle, but built up paint on the needle, between the needle and nozzle sides. It happens over time, wrong paint, too thick of paint, paint not properly shaken up, allowing solids to enter paint chamber. Pearls and Metallics are very bad about needing to be shaking up, shake up Pearls and Metallics until your arm wants to fall off, then shake 20 more minutes! Learn to clean your brush, and thin paints, if you clean your Airbrush and it sprays water great, then you add paint and it doesn’t spray good, it’s your paint thickness, or pressure or both, almost all paints I use need thinned, to flow proper, not all Airbrush’s are created equal, every Airbrush seems to be a individual, I learned by starting one pressure setting, and with thin paint, then thickened as needed, you will find what your Airbrush likes this way with different paints.

[@SprayGunner]

Well said, the airbrush cleaning/maintenance is a topic for another 15-20 min video.

[@Deathcricket]

OMG you fixed my shit! Thanks bro really appreciate the clear concise diagrams.

[@SprayGunner]

Glad to know that it helped!

[@tbradaric]

Awesome video. I have 2 airbrushes which making bubbles and not spraying paint. I'll try to save them using your advices.

[@SprayGunner]

Glad it was helpful!

[@hobbyhuman]

You saved me from returning my brand new (cheap-as-f***) airbrush.

[@gabriellee5928]

Thank you!! Definitely going to buy a self centering now. I’ve already had to buy 2 airbrush with the thread tip 😭.

[@ameliabuns4058]

so the nozzle threads were stripped. i managed to use vaseline to fix it for now. but it's such a bummer. it was a 60$ portable one with one of those mini pumps. the pump isn't very powerfull :(

[@andyjones6995]

fantstic matey, just bought a H+S infinity and was having issues with bubbles but now I know how to solve it, top job. Cheers pal

[@SprayGunner]

Glad we helped!

[@Maxmillion77]

What was the issue you had in the end because i'm in the same situation with the infinity but cannot work it out. I've disassembled and cleaned multiple times soaking the nozzle to make sure, tighted the cap and been overly careful so no damage. The best I can get it is no sputtering but still a little stream of bubbles coming up into the cup.

[@markissboi3583]

polish your needle also 💦 better flow

[@hornet900f]

i cant thank you enough, i really cant.so THANKS!!

[@SprayGunner]

Glad it helped!

[@carloscastro-gt7ld]

Thank you for the help I got my airbrush working good now

[@SprayGunner]

Glad I could help!

[@Jarhead1313]

I've got small bubbles coming from the side of my nozzle cap,what causes this?

[@SprayGunner]

Possibly threads are not sealing well enough. Bee wax should help spraygunner.com/badger-50-050-prepared-beeswax-for-heads/

[@Bassmunchkin1]

Absolutely fantastic step by step explanation showing the complete mechanics of problem solving, thanks millions

[@ohiorichkidbeats]

i really appreciate the time you took to make this helpful video...thank you

[@rujv200]

Great Video. I think you just explained why my Iwata stopped working! All I get is air and no paint out of it. Damn those small nozzles.

[@اعلاناتللدعايةوالاعلانالضوئي]

Hello, I have an airbrush Iwata and the problem is when I want to make a fine line I cannot get the color out and when I press the trigger more the color comes out a lot of color, I use oil colors mixed with gasoline please help me, thanks

[@SprayGunner]

Hello! Don't have experience with oil paints mixed in gasoline. Are they thick? Fine enough for a small nozzle? Paint condition could be the reason. If airbrush sprays water fine, I'd say the problem is in the paint.

[@اعلاناتللدعايةوالاعلانالضوئي]

@@SprayGunner Thank u🌹

[@wylankaochari5588]

this helped alot

[@eazymoney6158]

Could my needle being bent cause this? It bent today and I’m not sure the tip isn’t exact shape as before could that effect this

[@eazymoney6158]

I found problem brother it was the seal

[@eazymoney6158]

Cracked

[@mazenkanso]

Thankyou for your video, I purchased an airbrush, but when i tested it with water, only air comes out but when I completly remove the needle , then it sprays water. I have adjusted all the knobs and tightened the one holding the needle, still only air comes out. please can you help

[@SprayGunner]

Hello Mazen! Can you see the needle tip moving when you pull back the trigger? You should be able to see it form the front of the airbrush. What model is that?

[@mazenkanso]

@@SprayGunner Thanks for your reply. The needle tip moves in and out when I pull back on the trigger. I have also tightened the nut holding the needle , still nothing comes out but air.

[@SprayGunner]

Try shutting off the air and see if any water drips come out of the nozzle when trigger pulled back. If you see water comin out without air pressure, there must be something wrong with the position of the nozzle. Nozzle tip should come further than air cap, otherwise the air pressure will push the paint back into pain cup. Also make sure that the lid on the paint cup has an open hole in it so the air can get into the cup.

[@christophersmith-zn2kn]

My nozzle had a crack in it causing bubbles in the cup.

[@stickman6624]

What would cause paint to flow when the trigger is depressed ??? I don't pull back on it at all, I just push down for airflow and I get both air and paint flow . My brush is just a simple Avanti gravity fed double action with the 0.35 needle . It's nothing fancy but I'm a beginner so I wanted to start out with something affordable

[@SprayGunner]

Check if your needle is resting all the way against the nozzle (unscrew back section and try to gently push the needle forward). If the problem remains, most likely you have a cracked nozzle or deep scratch on the needle.

[@TheBulKathos]

thank you

[@craigbaldwin4935]

At <a href="#" class="seekto" data-time="705">11:45</a> that was my problem, fixed, thank you. I will order a new one for future.

[@SprayGunner]

We're happy to be helpful!

[@yubidubi]

This is the most incredible video. The magnified pictures are perfect.

[@SprayGunner]

Glad you think so!

[@tesimaniaco]

Excuse me, I have an iwata HP-CH, my problem is that the needle is not centered with the nozzle, when I pull the trigger back, you can see the pink needle in the nozzle. I bought another needle, but there are no changes, the airbrush works normal, but with the time it will deform the needle and make a groove in the nozzle. will have solution ?.

[@SprayGunner]

Hello. If the needle tip is pushing against the nozzle side hard enough to bend the needle or damage nozzle - it's one of the hardest things to fix. In a lucky case, it would be caused but the bent needle chuck. Second worse (still fixable) disposition needle packing (inside the body) or nozzle base (don't remember how it's made on CH but usually it's a cylinder in which nozzle goes in and it can be pushed to the side a little. You can try to gently re-position it. Lastly, it could because of body damage. I saw an airbrush which was stepped on with exactly the problem you describe. We offer professional cleaning and diagnostics for $25 if you' won't be able to figure it out by yourself.

[@arnococlet6895]

Hello! I just received my first airbrush. An Iwata HP CS and when I disassembled it I saw something on the needle. The needle is on one side a bit like an arrow tip but smoother. A bit faster on one side or like a small drop of water. Is it the way is supposed to be? (I guess not) thks!

[@SprayGunner]

Hello Arno! If I understood your question correctly - yes, everything sounds fine with your needle. It meant to be sharp on one side. Feel free to contact our support team with pictures. They can definitely help further! Best way to approach is message form in bottom right corner at spraygunner.com

[@minismartpainting6088]

Man you saved my airbrush thank u so much!

[@SprayGunner]

Glad we could help!

[@TheGoKidd]

Thanks, Artem!! Air cap O-ring was causing the issue. Shewwwww! You're the best, buddy.

[@SprayGunner]

You're very welcome!

[@radovankezele882]

Best tutorial, covering every type of airbrush. You saved my day! Thank You sir! I have hit subscribe button...

[@SprayGunner]

Thanks and welcome!

[@Allessio777]

So...if I have air bubbles coming out of the FRONT of my brush (when submerged in water), is it the air cap that is deformed? ...I have a cheap Chinese knockoff..but savings for an Iwata Eclipse

[@SprayGunner]

Some bee wax should fix it. Their parts not very precise so the bubbles probably cause by bigger than necessary gap between air cap and body threads. Save for GSI Creos PS289. Japanese quality, more advanced model for less $ : spraygunner.com/gsi-creos-mr-airbrush-procon-boy-ps-289-0-3mm-platinum/

[@RyanVBoom]

I used plumbers tape over the nozzle and that fixed it thanks for pointing these out!

[@SprayGunner]

Excellent!

[@farhankay]

Just had this problem last night! 😬

[@drewdicesore]

Pls help I have the iwata neo and I think the air cap can go too tight too

[@KillerNapkins]

Definitely helpful thanks! I guess I was a little too timid tightening my new nozzle for Iwata Hp-C+ after breaking one off the other day and it was letting the air out ha.

[@SprayGunner]

Glad it helped!

[@CollectorGamer610]

This guy explained it in detail very helpfull yo understand how airbrush works

[@SprayGunner]

We are glad you liked it!

[@Spicymuffin]

Less than 1 minute into your video and you solved my problem 😁 Spar max 4 operating perfect again. Thank you.

[@SprayGunner]

Glad it helped!

[@xen0_0x]

Thanks! Just received airbrush and from start it already was bubbles. I disassembled, reassembled to be snug and fit and now it works as it should!

[@SprayGunner]

Great to hear!

[@ObsessionChocolates]

I have had almost every issue that you've gone over. I use colored cocoa butter in our airbrushes (4). Models include a couple of Masters and neo and copycake. NONE of them work. I have checked all parts listed in your video which is great by the way. I"m thinking it is my hose. I can't see any obvious problems with the hose connection. Is there other parts I should check? Other things.. we use a heating pad to keep the brush warm so that the cocoa butter sprays. Perhaps the heat has ruined a seal? Help. I don't want to have to buy yet another one to add to our collection.

[@SprayGunner]

Hello, In this situation, you've got to have at least one working airbrush or new parts available so you can replace them one by one and eliminate the problem. There could be a micro scratch or crack on a seal or nozzle that you can't see but it's there. The only way to find out is to replace seals one by one, nozzle and needle and check on which pat the problem disappears. Thank you for watching!

[@Bedlamite23]

Thanks, your explanation solved my busted nozzle problem...

[@SprayGunner]

Glad to help!

[@johncooney69]

An amazing video. Thank you so much for your help and advice.

[@SprayGunner]

You are so welcome!

[@ProtoTangelo]

very helpful! thanks alot! I turned the seal and it worked!

[@SprayGunner]

Great!

[@musoseven8218]

Superb video - great insight and good use of examples and different types. Thank you 👍😊

[@SprayGunner]

Glad you liked it!

[@slevinlaine]

Thank you so much!!! I fixed it thanks to you! It was the neddle. :P

[@SprayGunner]

glad it helped!

[@PraetorGix]

Yup. Reason number 2. Thank you for such an informative video!

[@SprayGunner]

Glad it was helpful! Thank you for watching!

[@bryans5150]

Thank you so much sir for your effort and time to help us all out I really appreciate it

[@SprayGunner]

It's our pleasure!

[@janessagrant]

I only had bubbles in the cup half the time. Looks like my needles and tips were all mixed up. Had to piece together 3 sets of tip, spray regulators and needles..

[@chrismawdsley5634]

Thank you for posting this. I was close to pitching my airbrush (Paasche VL) over this problem.

[@tommacbride3654]

Good Show! Cheers!

[@SprayGunner]

Thank you! Cheers!

[@jsav731]

I’m starting to slowly realize airbrushing sucks , maintenance is a pain in the ass this month I’ve bought 2 airbrushes and I’ve watched 5 videos on why it’s not working smh someone should make a more reliable brush I shouldn’t feel like a painter and mechanic

[@chnblc]

it was a nice guide. Thx man.

[@tenthurkira8548]

Video helped a lot. Had been plenty of places looking for my bubbling into my pot problem but you are you only one I'd seen who laid it out so a newbie like me could immediately see I had damaged my nozzle and that it needed replacement! Thanks so much!

[@SprayGunner]

Thank you for your feedback. We're glad to help!

[@richardchapa275]

Not to long ago I bought the spiky buts bundle from you guys and it has been great, however I can't ever get my airbrush to back flow to mix paint or to clean itself. I'm covering the tip with my hand and nothing happens. I got the harder steenback ultra

[@SprayGunner]

Thank you for purchasing from us! This accessory should help spraygunner.com/harder-and-steenbeck-plastic-cap/

[@2crappie1]

great video! helped me alot

[@lbboy2513]

Hi to you, I really need help about a Paasche Talon GF. When using #1size needle combo, the air cap is rubbing agains the fluid nozzle when I screw it, so clogs appears very fast. I have to unscrew the aircap for about 1 turn and a half to get rid of the bubbles but then, (no cloggings) but major air leak from aircap threads... When a remove the fluid nozzle the aircap screws normaly and also when using size#2 combo all is fitting correctly... Can it be a manufacturing problem?

[@SprayGunner]

Hello! Just to verify, you replace all 3 parts, right? Air cap, nozzle and needle? And they all marked as #1 size?

[@lbboy2513]

@@SprayGunner Sorry for the dealy but yes I replaced the 3 parts AND also Paasche sent me #1 and #2 combos and I got the same result... Bubbles and bubbles even with water... I'm begging to think that Paasche is probably closer to crap than I tought... Is a good old Patriot 105 should work better for doing some camouflage pattern?

[@SprayGunner]

Patriot is a good choice. We didn't have any issues with them as we did with Sotar (another Badger airbrush). 105 model is actually on sale now spraygunner.com/badger-patriot-105-1-fine-gravity-airbrush/ If you can spend a bit more on an airbrush, also check GSI Creos range. They have 0.2, 0.3, and 0.5mm airbrushes available spraygunner.com/airbrush/gsi-creos-mr-airbrush/

you saved me from buying another nozzle and/or needle. TY!!

[@SprayGunner]

Glad to hear that!

[@joachimzet7553]

Thanks bro !

[@SprayGunner]

Welcome 👍

[@brandonthewhite]

This video is very informative! I have an Iwata HP-CS and it has begun to spray a little paint when the button is pushed down before it has been pulled back at all. Do you have any idea what could be causing this?

[@SprayGunner]

Thank you! It sounds like your needle not pushed all the way forward or nozzle cracked. Try to loosen needle locknut and push the needle forward gently. If that not resolves the issue, probably nozzle crack.

[@brandonthewhite]

@@SprayGunner Thank you! Loosening the locknut and pushing the needle forward fixed it and it’s working normally again, I appreciate your help immensely.

[@kevinm3751]

I got a Master airbrush that worked perfectly until I took it apart to clean it and nothing I did putting it back together resolved air going back into the cup. Thinking I did something wrong I got a deal on two more Master airbrushes. I was extremely careful taking them apart and making sure to write down everything I did and all the parts and guess what, both of them now blow air back into the cup. I tried literally everything to fix them and ended up with three brand new airbrushes that refuse to work. So I am one of the 1% of users who's problem is NOT what you are saying it is! O and dont bother trying to contact TCP Global about it because they could care less and were zero help at all! If you get a chance get one of their cheap ass brushes and see what you can figure out about it.

[@SprayGunner]

Hey Kevin! Sorry to hear about your situation. They use rubber seals in these brushes so I won't be surprised it that has something to do with that. One of the seals could be deformed and leaking air or something. Or because of higher tolerance on parts threads, there could be something unsealed as well. We can sell you ne good airbrush if you want to ;)

[@kevinm3751]

@@SprayGunner Thanks for the info, yes my first thought was a deformed seal and tested that with new ones and no joy. Thanks for the offer of a good brush but thats why I subscribed because after my total fail with cheap airbrushes I broke down and already purchased two of yours. Funny how after 100's of uses they just work..;)

[@SprayGunner]

Thank you for your business!

[@GiftofChaosStudio]

This explained my problem. I thought it was the O ring, but I definatley pushed the needle up too hard (frustrated because of the cloging). Thank you so much!

[@SprayGunner]

you are very welcome!

[@1badsj]

Thank you for your detailed explanation. I have 3 airbrushes and 2 were blowing bubbles. I learned one had the nozzle cap not tight enough thus the nozzle was not protruding. The other one has the nozzle gasket missing. I made it seal by using beeswax. However, without the O-ring, the nozzle once again does not protrude past the nozzle cap. I need to find a replacement O-ring.

[@SprayGunner]

Glad it helped, thank you!

[@mikebalis9963]

Superb explanation!

[@SprayGunner]

Glad it was helpful!

[@mikebalis9963]

@@SprayGunner please keep posting these videos.

[@timjerome8942]

Fantastic explanation, helped me fix my problem right away! Glad I bought from you guys and will buy more in the future!

[@SprayGunner]

Thank you Tim! We're glad to help and appreciate your business!

[@carolinebaker9704]

My airbrush is driving me mad it keeps blowing bubbles I've checked all the seals and cleaned everything so the needle moves freely, I even bought new parts for it. It worked fine before I cleaned it. There's no blockages, air is coming out of it but it just won't stop blowing bubbles!!! Any ideas please?

[@SprayGunner]

Hello Caroline, It's hard to help remotely, especially if you checked all the connections between needle/nozzle/air cap. You're welcome to send it to us for service.

[@ryanhubbard7082]

Absolute legend , thanks heaps I was struggling hard to work out the problem , this was very good to understand why I was getting issues .

[@SprayGunner]

Glad it helped

[@Emtbtoday]

Hi I am newish to ai and not having the best experience with it! I lloved panel beating and car body repair work shop job! Sprayed vehicles for donkies now! And have taken up my old hobby now older building model kits all Armour stuff! I bought a cheap airbrush to get me started again and its crap really well I feel it is haha! I just notice your bit on the needle proceeding out of the air cap!? My 2 brushes don't have this!?? The nosil basically flush with the tip of the air cap

[@SprayGunner]

Hello! It's normal for some airbrushes. Even on top-level models like GSI Creos PS290 and GREX Tritium, the needle won't stick out, because those airbrushes made for large area coverage, not for detail. That's more of a spray gun type of the needle. If you take a regular paint spray gun, the needle won't stick as well. Long pointy needle tip made on airbrushes which meant for detailing. If you want to spray hairline - you'll have to get something with a pointy needle tip. For new users, one of the best options for $ would be GSI Creos PS270. spraygunner.com/gsi-creos-mr-airbrush-procon-boy-ps-270-0-2mm-platinum/ It's a great detail airbrush with a fair price tag.

[@Emtbtoday]

@@SprayGunner thanks for that info, I ordered the meng mts airbrush with the air pressure knob under cup and a twin tank compressor the chea on I ha e I think is the problem! It's not giving enough psi now to get paint flow it's even struggling with water! Just mo water only air so just orderd a new lot it is over 10yrs old maybe an O ring I the piston corroded or something can't see it but when blow in cup of airbrush it sprays no problem so must be the compressor I should get nice detail from this brush it's got a good write up! Thanks again stay safe!

[@Emtbtoday]

Hi again 1 year later I see my comment has but only means Im having problems! I ended up going for the sparmax 0.3 and 0.2 same again nozzles line up with the cap! I'm finding this interesting they do say there high detail ones I got but there absolutely rubbish! Don't spray worth of Shit! Excuse my French but really not happy with them eh! Not cheap either at £90 each! I was looking at the iwata neo my mate has in stock in the model shop but hear to many bad reviews on it and to stay clear of it!? Im Still thinking of picking it up think it's around same price as sparmax.

[@SprayGunner]

Hello! A lot changed within the past year, but not our recommendation. spraygunner.com/gsi-creos-mr-airbrush-procon-boy-ps-270-0-2mm-platinum/ great airbrush for detail or PS-289 with 0.3mm nozzle for general use. We ship them worldwide for free (only customs fees apply in some countries).

[@antonjonsson424]

Thank you this was very helful

[@SprayGunner]

Glad it was helpful!

[@indicamoon2048]

I can't thank you enough for sharing your knowledge like you do! This video just saved me so much frustration. I'm a newb and trying to absorb as much know how as i go along but still ran into some troubles with my new badger sotar that i only used for a day, now i have to mention the airbrush i had before this was $20 princess auto special that was a nightmare to use.. so seeing the level of detail i can get with my new one i was pretty stoked. So today when i used it i put some primer in it that apparently isn't recommended for a needle as small as the one i have.(should've read the bottle first) It bunged up in there right away and I spent hours messing with it till i found your video. That part at the end where you mention how that tiny lil nozzle tip thingy is supposed to sit. No one else in the multitude of vids on here touched on that point. So much gratitude! Def know where I'll be taking my business next time! cheers

[@SprayGunner]

Thank you four your comment, Indica! We're glad to be helpful and to earn your business!

[@Cozziebro]

Great video. All aspects explained clearly and in a way most people will understand. I have a question......what do you do if you replace the nozzle and needle and follow all the procedures to the letter and STILL have bubbles in the cup ? ( I have an IWATA Neo TRN1)

[@SprayGunner]

Hello Costa, We can definitely take if for service and figure out what's going on. If all the parts are correct and tightened but you still having an issue, there might be some micro dents/scratches which can be fixed with some sealant like bee wax.

[@szadekofnihon]

Thank you A LOT. Since I bought the infinity cr plus about 3 years ago, I have had the bubbling problem constantly, the only solution I had was to carefully squeeze the nozzle with pliers and even so I kept having the problem many times, it only happened to me with the nozzle of 0'15. But thanks to this video I have finally been able to verify that what could go wrong from the factory was the teflon ring of the 0'15 nozzle, after turning it over it has worked almost correctly (it continues to bubble but very very little, micro bubbles, but even with that, the flow works perfectly) I will try to buy new teflon parts and change them. Again thank you very much for this video.

[@SprayGunner]

Glad it was helpful !

[@tonytodd7201]

Thank you so much for this video. I have an infinity and have been cleaning and cleaning the nozzle, because I thought bubbling indicated debris in the nozzle and so was sure there must be some tiny piece of debris in it that I just couldn't get out. Saw your excellent explanation of the 3 main reasons bubbling occurs, checked the nozzle seat, cleaned both surfaces carefully, made sure it was well tightened when screwed back in and...problem immediately fixed! I wish I'd seen your video a couple of months ago!

[@SprayGunner]

Glad that you figured it out!

[@petestone1011]

I fixed it while watching this video. Idk what it was exactly but i beleive it was cleaning it fully and tightening the tip well. Either way thankyou

[@mugofbrown6234]

Cheers. 4 minutes in and I´ve fixed my airbrush! Sorted.

[@juantress]

hello my friend, i spend lots of time / watching youtube videos of bubble problem on airbrush, i am new in this , the thing is my airbrush got cluged cause i didnt use a filter when loading paint, paint was dirty, airbrush clugged, i dismantle the hole thing, cllean it with special solution, put it all back together again and i got bubbles on paint cup, i was about to order another airbrush, all the other videos have much information but not a single one expleins all the way you show what happen at airbrushing, i saw this video, i identify the part that needed adjunstment (nozzle cup) i thightned it enogh , and boila PROBLEM SOLVED, I AM SO THANKFUL TO YOU! the full story is a lot longer, but anyway , i stumbled uo on your video without searching, i was tired of many videos/attempts to resolve my problem in negative response, and after seeing this video, in 30 seconds problem was solved! thank you so much. have a great life!

[@SprayGunner]

So happy to hear that it helped you!

[@dosdont]

Yeah, I'll never buy another airbrush with those small tips again. Total pain in the ass clean or change.

[@modelmagic9930]

I’m not sure if my airbrush is bubbling but every time I turn it on I hear this annoying air hissing out of the paint cup could that be related to bubbling. I’ve no idea what’s wrong with it.

[@maxwilliams1060]

That's solid advice, thanks man.

[@SprayGunner]

You bet!

[@avatarroku3173]

Thank you!! Literally the first time I cleaned my Harder and Steenbeck I dropped the nylon washer from the nozzle so it leaked from the front 5 disassemblies + this video I found it on the floor next to me. Thank you I wouldn’t have know it was missing without this.

[@SprayGunner]

Glad it helped!

[@kubasobiepan1386]

Thx a lot, just fixed my airbrush. Greetings from Gdansk, Poland

[@SprayGunner]

Glad it helped

[@JesseRiley]

Thanks, couldn't figure out why I was getting air bubbles. I watched the video, understood the physics clearly, then just tightened my nozzle and problem solved!

[@SprayGunner]

We're happy to help! Feel free to call us with any questions

[@crusader3012]

Me too; solved my problem. Great presentation video.

[@michazurawski9913]

Cool video! But what about bubbles from trigger area in H&S Ultra? Any ideas?

[@SprayGunner]

Hello Michal, Trigger area is a completely different story. Most likely needle seal is damaged or missing. Part E on this diagram spraygunner.com/parts-accessories/harder-and-steenbeck-parts/for-ultra-gravity-feed/

[@kmassmgtow2774]

Thanks for this video. I just got a new Harder and Steenbeck Infinity airbrush and used it once and it worked fine. Went to use it again and I didn't get any air flow out of the nozzel. I kept getting blowback and couldn't figure out why. Some how when I took it apart, I damaged the nozzel. When you explained step number 2, I immediately knew what my problem was. Thanks again.

[@SprayGunner]

Glad it was helpful! 0.15mm nozzles and needles are very fragile so be careful with them.

[@kmassmgtow2774]

@@SprayGunner Thanks

[@Tezukamaya]

I got myself an airbrush to try and do some doll repaints and one problem that I had was figuring out why my airbrush was bubbling and this helped me big time because while I was cleaning out my airbrush a tiny little rubber band came out and I wasn’t if it was important but I’m glad found your video, thank you so much 😊 ❤

[@SprayGunner]

Glad it was helpful!

[@lololendoable]

Thank you so much one of the best guides for troubleshooting these problems👍👍👍 ? I'm pretty much done with my starter airbrush... I would appreciate if you can give me advice on purchasing a new pro model gravity-fed airbrush... My max budget is $150 for fishing lure detail

[@SprayGunner]

Hello Eddy, Thank you for your feedback! Going over your budget a little, I'd recommend considering this airbrush spraygunner.com/harder-steenbeck-evolution-2-in-1/ It also comes in a solo version, but 2in1 is much more flexible, allowing you to have 0.2mm nozzle set for details and 0.4mm for general needs. Specifically for details, PS270 (made in Japan) is a great choice spraygunner.com/gsi-creos-mr-airbrush-procon-boy-ps-270-0-2mm-platinum/ Made in the USA badger airbrush Sotar, also comes as 3in1 set spraygunner.com/badger-sotar-2020-3in1-airbrush-set/ The last one is temporary out of stock, should be back by the end of next week.

[@j_holtslander]

SprayGunner Com I was thinking my first would be the Mr. Hobby 0.3 and then later the 0.18. Do you think I should start with the 0.2?

[@cactusrick57]

Excellent presentation. You thoroughly explained the problems that can occur on various airbrushes. You have a lot of knowledge!

[@Pawan-m2i]

Very good video bro

[@SprayGunner]

Thank you so much 😀

[@jeffmorton1587]

Thank you for a very intuitive and clear video, it asissted me enourmously, as i had not realised the seals at the bottom of the nozzle could be replaced! Just saved me a heap of time and money, so thank you

[@SprayGunner]

Excellent! Glad it helped

[@amsgone]

Still learning after 25 years!! Thanks

[@littlesweets3390]

I have ordered a couple different things from you off of Amazon, and I didn't realize this was you, till a couple of minutes ago...lol ...By the way, the items were sent very fast,and exactly what I ordered.You are as thorough with your videos as you are with your airbrush supplies, and you answered my questions on there very quickly also...thank you.

[@SprayGunner]

Thank you, Eric. We appreciate your business!

[@icyblankets4971]

So I have replaced my nozzle, replaced the o-ring and replaced the needle... I am still getting bubbles in the cup. Absolutely baffled as to why this is still happening... There are very slight scratches in the airbrush of my body, could this be the reason? Any advice would be greatly appreciated!

[@SprayGunner]

In my 15 years in spray equipment field I’ve seen 2 cases where factory defect caused airbrush body to leak air into paint channel. Yours can be the third case. If you want, send it out to us. You can get info/instructions by emailing [e-mail] also, since you’ve mentioned scratch that is visible - if you can see it with a naked eye, that means the scratch is significant. Try putting beeswax over it. spraygunner.com/badger-50-050-prepared-beeswax-for-heads/

[@mybuttitches6450]

Can I get an airbrush and compressor from you? Around 300 dollars? I’m a beginner and bought a Timbertech, airbrush worked for about 3 minutes and stopped working. The motor after 30 minutes gets so hot, you can fry an egg. Not happy

[@SprayGunner]

Totally! We have a variety of good compressors and airbrushes. Our best seller called Tooty. Here are some kits spraygunner.com/compressor-for-airbrush/compressor-kits/

[@mariototsi5987]

The PS 770 Airbrush is one Airbrush that i ll wanna try out. Most because it's supposed to be an cheaper variation of a micron and because it is slightly bigger than other Airbrushes and i imagine it fits better in my Hand. Seeing ur video, i got bit worried about the nozzle size though.. and i m considering not to buy it. If it's problematic every time the tiny nozzle stuck with paint, to clean it, it takes out the fun factor in it. What's ur oppinion about it?

[@SprayGunner]

Hello Mario, Small nozzle is a cost of superior spraying ability. We recommend using the nozzle tool from this set spraygunner.com/gsi-creos-maintenance-kit/ for removing and installing. It's much more convenient and less chance to damage the nozzle. Thank you!

[@adambysko1787]

This video has been so helpful. I have been fighting with my airbrushes for years. Currently trying to get my evolutions up and running both are giving me this blowback issues going to try replacing the tips like you showed in the video.

[@SprayGunner]

Glad it was helpful!

[@miltwheeler6883]

thank you, I need a new nozzle

[@adamsapple7193]

Great info! You helped me understand and fix my airbrush!

[@lunarossa7503]

Thank you so much for this video, I learned so much. I have 2 airbrushes, one for makeup and one for my art. Thank you again...........I love your rings...where can I get one like the ones you're wearing ?

[@SprayGunner]

Thank you for your support! One definitely came from a trip to Mexico.

[@zolti22]

Hello, I have my Mig Aircobra's (which is basically a Badger airbrush) nozzle stuck in the nozzle base. What do you recommend to do to un-stuck it? Thank you!

[@SprayGunner]

Hello, Ultrasound cleaner. It usually helps to loosen up jams like that. If you don't have one - just try to push it from the back using the needle. Very gently and shake the nozzle from the front at the same time. Everything light and gentle. The nozzle is very easy to damage. Good luck!

[@zolti22]

Thank you for the fast reply! I will try it when I will get home. I don't have an ultrasound cleaner, at least not yet, (I am thinking to buy one for cleaning my airbrushes), but I will try the other method.

[@verondelta2]

Brilliant video!!

[@thematias4]

thank you! without this video would not heave realised my nozzle didnt have a seal :D prob flew off when i dropped the nozzle yesturday

[@oldb-1kenobi]

Thank you so very much for this video, it helped solve my bubble problem!

[@SprayGunner]

Glad it helped!

[@pachinobadnewz3204]

I have a badger 155 anthem n it's not throwing no paint out n I cant work

[@SprayGunner]

Hello Pachino, If you took all steps described in this video and checked everything but it still doesn't work - I'd suggest sending it to our service department for diagnostics.