Product Breakdown - Liquid Glass Deep Pour Epoxy Resin

[@GABEAKAGRIM]

I'm new to epoxy..I did a flood coat on my table top.. came out great but the side didn't come out great.. can I add epoxy to edges or do I need to re flood the table

[@superclearepoxy]

Great question! You can absolutely add some epoxy to the edges of your table. If it has completely cured I would recommend lightly scuffing the sides with either 220 grit sandpaper (or even a scotchbrite pad) and wiping it down with Isopropyl Alcohol 90% or higher first. Then proceed with applying a thin layer of either our Superclear Table Top Epoxy or Countertop Epoxy. This can be done by hand, with a chip brush, or a foam brush. The reason for scuffing the surface is to help with proper adhesion for a mechanical bond. If it is too smooth of a surface there may not be a proper bond, which could potentially lead to delamination down the road. If it is still hard & tacky, skip the sanding and go right ahead with applying the next thin coating using the products mentioned above. Here are some links to those products: Superclear Table Top Epoxy: tinyurl.com/3wwjzfsj Superclear Countertop Epoxy: tinyurl.com/mrx5eyse Superclean Epoxy Cleaner: www.superepoxysystems.com/product/superclean-epoxy-cleaner-8oz-bottle/ Scotchbrite Pad: www.superepoxysystems.com/product/3m-scotchbright-light-duty-pads/

[@dalefill1976]

I've been using Liquid Glass for about 4 years. Best epoxy I've ever used!! I mostly make epoxy river cutting boards but have also made a few small tables. They turn out beautiful! I also use Black Diamond pigments. Both are nothing but the best!! You wanna make good products use good ingredients.

[@superclearepoxy]

Thanks for the kind words! You rule 🤘

[@Oheyesi]

let me say this.... Superclear Epoxy is the BOMB! not only is the product everything you could ever want plus more BUT the customer service is AMAZING. Side note - My husband is a video editor and the production of this video is done very well. Very informative, thank you

[@robertcarper9573]

Met you at IWF and was impressed. I tried the Deep Pour and am hooked. Congrats for being able to get me away from a product i've used for years, didn't think it could happen. Great product with zero issues using it.

[@superclearepoxy]

Thank you so much! We’re thrilled to have you on board and glad Deep Pour impressed you. Can’t wait to see what you create next-feel free to share your projects!

[@ItsArtByDonna]

Looking forward to trying this in the future!

[@superclearepoxy]

Sweeeet! Let us know if you have any questions. We'd love to help!

[@jeffhoose2504]

Would you recommend a vaccum put to degas before a pour???

[@Muhsinahnadeem]

✍🏾 2:1, 2A:1B, Measure “B” (curing agent) out first. I cup to pour. Another to mix. Mix slow and scrap the sides

[@superclearepoxy]

You've learned well young epoxy padawan 🙇

[@nurseroses]

That's what is confusing,. The directions say use sealant or curing agent. This is not addressed in the video. Also, the temperature needs to be 70 to 80° The video says, "Keep cool. Heat is an enemy. Which is it?

[@bandersen2117]

Thank you! It was helpful:)

[@superclearepoxy]

That's great to hear 😊 Anything we could improve on for future videos?

[@markmoulin41]

Did you use or should you spray the mold with a release spray prior to pouring the resin in?

[@superclearepoxy]

Great question - we actually did NOT use any mold release in this product breakdown. BUT - if we did, we would highly recommend a paste wax mold release for use with Liquid Glass Deep Pour Epoxy. The sprayable mold release tends to dissolve before the deep pour epoxy cures. You can find the mold release on our online store: www.superepoxysystems.com/product-category/tools-accessories/mold-releases/

[@MichelleShine]

Hi there! Did you ever come back & video the "fix" on the square piece ? I was wondering how you did the dome and what you used. I've made coasters that i feel definietly need a top pour. Thx so much! I also have the liquid glass deep pour epoxy but a little gun-shy to start a project with it. Still new to resin and trying to pin down what i want to do with it🤪!

[@superclearepoxy]

Hey Michelle - thanks for reaching out! We haven't fixed that project yet, but we certainly plan on it. Our next video will be on our 24 Hour Deep Pour Epoxy, and that will be our last product breakdown for a bit. We will most likely work on some DIY projects and that square piece you mentioned. A quick summary for how we plan to restore it would be by sanding it down beneath the blemishes, cleaning with Isopropyl Alcohol 90% or higher, followed by either a polishing compound or a flood coat with our Superclear Table Top Epoxy. Hope that helps! Have a great one 😊

[@MichelleShine]

@@superclearepoxy Thank you! Looking forward to it!

[@nurseroses]

The direction that come with your epoxy recommends using the sealant first. I cant find what its refering to. Is that the glass top? Also it says the temperature needs to be between 70& 85 I think but your x Video says keep the epoxy cool. Please clarify. Ty

[@Muhsinahnadeem]

What is the correct name of the mixing container?

[@superclearepoxy]

We call them mixing containers or buckets, but we sell these: www.superepoxysystems.com/product/epoxy-resin-mixing-cups/

[@NerdsNtheHood]

I’m just now starting using Liquid Glass epoxy. Could you recommend the grits and order of usages when it comes to sanding the epoxy

[@michellecreative701]

I am in cold climate don't want to epoxy in my house. I have a garage but like I said it's getting cold here. Any suggestions for me to setup in garage?

[@superclearepoxy]

Hey Michelle, we have heard of people using a seed heating mat to place under their mold to help bring up the temperature, but we don't have any first hand experience with this. Feel free to give it a shot, but keep in mind that introducing too much heat could have adverse results on the outcome of your pour 👍

[@mlrable]

What are you spraying to clean yhe mixer

[@superclearepoxy]

We were spraying it with Isopropyl Alcohol 90% or higher, but you can also use our Superclean Epoxy Cleaner. Superclean Epoxy Cleaning Spray: www.superepoxysystems.com/product/superclean-epoxy-cleaner-8oz-bottle/ Isopropyl Alcohol 90% or Higher: fgci.com/product/isopropyl-alcohol-99/

[@stonecrosscreations]

Which product would be best to use for faux fruit ie grape vine and grape clusters?

[@DavidMoore_Golden]

Can I seal a slab with tabletop and then use deep pour while the tabletop epoxy is tacky?

[@superclearepoxy]

YES 👍 That is exactly what we would suggest!

[@DavidMoore_Golden]

@@superclearepoxy Thanks!

[@erinowens9870]

If it’s left out in the sun will it turn cloudy/ yellow? My project will be outside everyday to sun exposure

[@erinowens9870]

It’s just a small car badge

[@hotshoestudios]

What's the working pot life?

[@superclearepoxy]

Hey there, it typically takes around 10-12 hours for the Liquid Glass Deep Pour Epoxy to gel up. Let me know if you have any other questions!

[@MotoCarbon]

I don't understand how so many epoxy companies have not tested for cps rating. It' has to be one of the most important stats and Liquid Glass doesn't test for it.

[@superclearepoxy]

Hey there! We do actually have a CPS rating for all of our products on our website 😉 Here's the link to the Liquid Glass TDS in particular: www.superepoxysystems.com/wp-content/uploads/2023/01/Liquid-Glass-Epoxy-System-TDS-12-08-21.pdf And here's the link to all of our SDS/TDS/Instructions: www.superepoxysystems.com/instructions-tds-sds/

[@MotoCarbon]

@@superclearepoxy That's good to hear! I tried looking on your website the day I left my comment and could not find anything about CPS. I even tried running a search for the term CPS and found nothing.

[@richardl.herron7278]

Is Liquid Glass paintable ie Primer and oil base paint.

[@superclearepoxy]

Hey Richard, I'm not sure I 100% understand the question. Are you asking if you can paint Primer and Oil based paint on top of the Liquid Glass epoxy or pour the epoxy over those coatings? Feel free to give us a call as well if you'd prefer to speak with someone directly: 888-849-0588

[@Muhsinahnadeem]

What will happen if the pour is not quite 2 inches?

[@superclearepoxy]

Hey there! That's a great question. It will cure no problem between .5" up to 4"+ depending on your volume and ambient temperature. Go for it! 👍

[@Muhsinahnadeem]

@@superclearepoxy Thank you so much!

[@superclearepoxy]

Absolutely! Let us know if you have any other questions! @@Muhsinahnadeem

[@waterlilly62lori]

I mixed slowly, used torch and heat gun. Nothing but micro bubbles! What am I doing wrong?

[@superclearepoxy]

Sorry to hear you are dealing with unwanted bubbles! The epoxy could be too warm or too cold. Please email [e-mail] and our experts will be happy to assist you further.

[@johnrichardson1949]

Seriously re edit this now and get rid of that backing track- my gosh

[@superclearepoxy]

Sorry about that 😅

[@Zcolaramat]

I want to do a window with this 🤔

[@superclearepoxy]

That would be awesome, HOWEVER, this product does not hold up well to direct UV sun light exposure. It will significantly decrease the clarity in a short span of time. Also if it is sitting out in the sun, if it gets too warm (around 150F-160F), this could cause the resin to become flexible. Let us know how it goes though.. 🫠

[@JordanAnastasio]

You actualy dont want 90% iso. 70% cuts through oil maybe a little slower, but you get longer work time. You guys try pouring 90% on a towel and see how long you can clean with it before it evaporates

[@superclearepoxy]

Great point! 70% isopropyl does provide longer work time for cleaning due to slower evaporation, making it effective for removing oils. What’s your go-to cleaning method?

[@BBQLord.]

I really needed to watch this video, but the music damn near made me stop half way through.

[@superclearepoxy]

Heard - we will be fixing that moving forward! 😅

[@MrC-ib8xy]

the background noise is so irritating

[@superclearepoxy]

Heard 🥴 ..we will be fixing that moving forward! 😅

[@ralphpond2121]

Background music is still really annoying September 2024. I want to use your product, but I don't want to lose my mind listening to that noise! Please delete it--I expect it is costing you sales.

[@pauldyar3949]

Music is irritating

[@Devilllz]

Waste video