Pretty cool that you guys are still putting out Terminator parts. I plan on adding this along with the intercooler to the other VMP parts my Cobra has
@turneriron3 жыл бұрын
Definitely would like to see the 3/4 as an option as well ! 👍
@allenhoward93793 жыл бұрын
I thought you were going to have removable tubes with a few different sizes?
@racequad92 жыл бұрын
Justin, how much of the pluming needs to be changed out to 1" lines? Would there be a bottleneck at the intercooler pump since since the inlet/outlet can't be changed out, and would there also be a bottleneck at the heat exchanger inlet/outlet? Or am I overthinking it?
@VMPPerformanceTV2 жыл бұрын
For the full benefit of a 1" system, it's recommended to run the entire system as such. But you will see small improvements across the system as you work your way up with each component.
@canadianmarauder19233 жыл бұрын
Oh boy this is exciting. Wonder what I should do? I’m supercharging my 03 marauder and have to make some decisions as soon as I finish beefing up trans. I need an intercooler and a water manifold. Hoping for 550-600hp at the crank.
@VMPPerformanceTV3 жыл бұрын
Marauder's are awesome! If you're using the Terminator lower intake manifold and head unit, these parts would be applicable to your build.
@canadianmarauder19233 жыл бұрын
@@VMPPerformanceTV yeah I’ve got the termi lower manifold but the head unit is off a 2010 Shelby so I need to contact cobra engineering for the adapter plate. All I know for sure is I don’t want to use the factory water manifold. I will be in touch in a couple months
@VMPPerformanceTV3 жыл бұрын
Sounds good! We look forward to working with you.
@compted103 жыл бұрын
What about an AN outlet setup?
@jlauscher3 жыл бұрын
I would assume, that because the barbs are so close together, that it would be impossible to actually thread them on.
@VMPPerformanceTV3 жыл бұрын
No plans for it due to space constraints.
@compted103 жыл бұрын
@@VMPPerformanceTV I assumed nonsymetrical lengths to avoid that issue. However I haven't had time to mock up a card board setup to consider space constraints.
@dazwelding973 жыл бұрын
Love this!!
@Lethal_Venom3 жыл бұрын
For a street driven car that's not raced is it worth upgrading the intercooler to the VMP unit with this water manifold? I plan on adding a Gen3R and making between 650-700
@VMPPerformanceTV3 жыл бұрын
While not absolutely necessary at that planned power level, there is a few benefits to be had from our upgraded intercooler and this matching water manifold for a street car. You would see a quicker recovery from scenarios like stop and go traffic as well as WOT pulls. You would also see more stable IATs overall.
@Lethal_Venom3 жыл бұрын
@@VMPPerformanceTV Thank you. I’ll weigh my options for what I’m going to do
@VMPPerformanceTV3 жыл бұрын
Don't hesitate to reach out if you have any questions. We're happy to help. We appreciate your consideration!
@Lethal_Venom3 жыл бұрын
@@VMPPerformanceTV Always! I have in the past when debating between VMP / Whipple, as you can see I’m here. Staff was very helpful
@gunsandhorsepower3 жыл бұрын
Do yall have anything for the none terminator cobra