This is the same machine that I’m saving up for. Thanks for showing this process.
@baldmanchronicles4114 ай бұрын
Mine is on the way! Can’t wait to pull some.
@rizmal53363 жыл бұрын
Good👍
@adammiles44792 жыл бұрын
no pre infusion?
@yusoffamir70503 жыл бұрын
Order online 2 cups of latte pls. Tq.
@ahmadfarhan34623 жыл бұрын
Woww😆
@zrill843 жыл бұрын
Laju nye
@ahmadfarhan34623 жыл бұрын
Hehehe🤣
@keithknox15792 жыл бұрын
I have Profitec 600. Recent purchase. What's your process for making many lattes back to back. ie. do you flush the group head each time? rinse the portafilter each time or just wipe it out? thanks
@zrill842 жыл бұрын
I do flush the group head, to actually clean the shower screen then knock the puck out and only wipe it. Then continue with the next shot
@Sondeln-xz7fl3 жыл бұрын
Top alles richtig gemacht. Wie bist mit der Maschine zufrieden?
@zrill843 жыл бұрын
Thank you, yes i love it. Its a great machine
@sanchit08002 жыл бұрын
Great video, I've been struggling with the steaming process and this really helped! How do you need when to stop introducing air to the milk?
@zrill842 жыл бұрын
Introduce air until the temp of pitcher is the same as your hand. Then on just dip the tip deeper to swirl and heat the milk to temp
@arvidbjorkstrom65542 жыл бұрын
How many shots can you pull back to back before having to wait for the brewboiler to heat up?
@zrill842 жыл бұрын
I normally do milk based drinks, i have done more than 15 lattes back to back with no issue. Im not sure if its back to back espresso would be an issue. The boilers get up to temp very fast though
@arvidbjorkstrom65542 жыл бұрын
@@zrill84 thanks! Really puts me at ease with buying the 600 :)
@arvidbjorkstrom65542 жыл бұрын
@@zrill84 Wow, sounds like I don't have to worry about that then. :) Thanks for taking the time to answer! =)
@ebortoni2 жыл бұрын
Nice workflow. Question, do you have a link to that silicone mat? I like the size.
@tommos12 жыл бұрын
why did you run water through the group before brewing?
@SteelRaider1210 ай бұрын
He may have had another machine before this one as it's not necessary at all. If anything, when you are done you can run water through it again to clean the screen with the portafilter out and rub with rag after flushing it for a few seconds.
@turkishspinning16657 ай бұрын
The numbers 13.3 and 93 appear on the digital screen under the profitec text on the left of the machine. What do the numbers mean?
@zrill847 ай бұрын
93 is the brew temperature and 133 is the steam boiler temperature
@pchoisauce2 жыл бұрын
what grinder are you using here?
@zrill842 жыл бұрын
Im using Eureka Mignon Specialita
@franiqueblack2 жыл бұрын
Boleh tahu kenapa tak brew & steam at the same time?
@zrill842 жыл бұрын
Sebab nak tunjuk step by step and takut kalut 😅 Actually selalunya saya buat serentak
@franiqueblack2 жыл бұрын
@@zrill84 Oh I see. 😄 Ingat ada temperature drop ke apa bila brew and steam at the same time. Thank you for replying.
@actylise2 жыл бұрын
great, heating time? thank you
@zrill842 жыл бұрын
It gets up to temp in less than 20mins. I normally wait for 30 mins to ensure the grouphead and pf is properly heated up
@actylise2 жыл бұрын
@@zrill84 thank you
@christofferkjrholm81572 жыл бұрын
How many holes does your steam tip have? Been struggling with steaming on my 600 devils edt.
@zrill842 жыл бұрын
The one that came with the machine was two holes. I replaced it with 4 holes. Its much faster but u need to get used to the speed. Which part are you struggling with?
@christofferkjrholm81572 жыл бұрын
@@zrill84, thank your for your response! It produced a lot of bubbles when steaming, so was hard to get good microfoam and whirlpool. Found out this morning that when closed tight the holes on the steam tip was vertical, which was the cause of the problem. Adjusted it so the holes were horizontal instead, made a huge difference. Though I just picked up two new steam tips; one with 3 holes and one with 4, gonna test tomorrow. :-)
@salarzarandi3427 Жыл бұрын
@@christofferkjrholm8157 I have the same issue with the 2 holes tip, where can I buy 3 holes or 4 holes tip? Also, what do you mean by adjusting it to horizontal?
@christofferkjrholm8157 Жыл бұрын
@@salarzarandi3427 try asking your dealer for 3-4 tip holes. That is what I did. Regarding the 2 holes facing horizontally. Instead of having one hole just above the milk and the other submerged = vertically placing the holes. Try facing the holes in a horizontal way, like a straight line so both holes will either be submerged or above the milk at the same time. Hope this makes sense, hard to describe by not showing it :-)
@shafiqeverlast2 жыл бұрын
Boleh tahu beli mesin ni kat mana? Thanks
@JustPiichi2 жыл бұрын
Do you used distilled water in your machine or do you add certain minerals to it?
@zrill842 жыл бұрын
Im using normal water. So far all good. May I know what are you going after?
@JustPiichi2 жыл бұрын
@@zrill84 Oh, it's just that I've seen some people make their own "brew water" that consists of distilled water + a bit of Epsom salt and baking soda to get the ideal mix of minerals in their water to get better flavor without causing lime scale in their machine.
@zrill842 жыл бұрын
@@JustPiichi i see. Im just using normal filtered water. Also, the water at my place is soft, hence almost no/minimal scaling issue.
@bernardd2 жыл бұрын
@@zrill84 The Pro 600 has stainless steel boilers, which are corroded by the chlorine in tap water. I'm not sure how long and how much exposure it takes for those small "craters" to appear, but it's a good thing to know.
@shaneboyd8788 Жыл бұрын
I see you shot for 30g out, how much in did you have ? I’ve been playing with 20in/40out
@shaneboyd8788 Жыл бұрын
NeverMind I see about 18
@rutgut91193 жыл бұрын
I was under the impression that the pro 600 didn’t need a cooling flush?
@fahadara3 жыл бұрын
I thought the same!
@78pianist3 жыл бұрын
@@fahadara It doesn't, people do that as habit. I have the same machine.
@fahadara3 жыл бұрын
@@78pianist many thanks for the kind reply…. Am planning to buy a pro 600 too…. I did tons of research and believe profitec is one of best choices out there… Any advise or regrets :) ?? Appreciate your guidance
@78pianist3 жыл бұрын
@@fahadara No regrets. If I had to do it over again, I might add extra for the pro 700 simply because I can plumb it in, and has a bigger steam boiler. But for me, as I usually make coffee for myself, it's perfect. Great choice.
@fahadara3 жыл бұрын
@@78pianist thank you so much for the advise. It’s going to be 2-3 shots per day for myself. And I guess pro 600 is perfect.
@calvintran86912 жыл бұрын
hi guys, what is the distance between the front and rear feet from outer to outer?
@akquicksilver2 жыл бұрын
If you are still wondering - 15 and 1/4". Merry CHRISTmas!
@daniwhite30273 ай бұрын
Geil
@poppothepug22112 жыл бұрын
Wow
@wincav3 жыл бұрын
looks fantastic. Would you recommend the Profitec 600?
@zrill843 жыл бұрын
Yes, i would highly recommend it. The steam power is amazing. I love it. Another friend of mine got his yesterday :)