Programmable multifunctional DC 12V 4-digit timer relay YYC-2S Delinx

easy to operate, www.amazon.com...
Programs list:
P-11 : triggered, on (non-locked mode)
P-12: triggered, on, triggered again, off (self-locked mode)
(P-13 to P-21 are delay modes)
P-13 : triggered, on, delay TA, off (triggered again in TA is invalid)
P-14 : triggered, on, delay TA, off (triggered again in TA, Recount-down TA )
P-15 : triggered, on, delay TA, off (triggered again in TA, count-down“ displaying time +TA” )
P-16 : triggered, on, delay TA, off (triggered again in TA, Reset, display----)
P-17 : triggered, on, delay TA, off (triggered again in TA is effective)
P-18 : Power on again, on, delay TA, off
P-21 : triggered, delay TA ,on
P-22: Triggered time more than TA, on
P-23: Triggered ,delay TA , not triggered again in TA, on
P-24: Triggered time more than TA, on, not triggered again in TB, off
P-25: Triggered time more than TA, on, Triggered time more than TA again, off
P-26: Triggered ,on , delay TA,off
P-27: if Triggered signal is pluse, off ( pluse cycle less than TA )
P-28: Power on again , delay TA, on , not off until power off.
P31-P33 are cycle modes
P-31: Power on again, Infinite cycle until power off : on, delay TA, off, delay TB
P-32: Triggered , Infinite cycle until power off: on, delay TA, off, delay TB
P-33: Triggered , Infinite cycle until triggered again : on, delay TA, off, delay TB
P-34: Power on again, delay TA, on, delay TB, off
P-35: Triggered, delay TA, on, delay TB , off
P-36: Triggered time more than TA, on, delay TB, off
P-37: Triggered, on, delay TA, off , delay TB (triggered is invalid in TA or TB)
P-38: Triggered, on, delay TA, off, delay TB, on, delay TA, off

[@aplakal]

Thank you!

[@thenews25]

Good video I like it

[@saalada]

valeu amigão aqui do brasil me ajudou muito. abraço.

[@elyanaguilar2246]

TY i need P--36

[@mrmtellstherealtruth5304]

Good video!! Thanks. You showed it better than another video. Can you tell me the following pls: Which P will do the following: 1) Run the motor slowly every 2 hours, for only 5 seconds and then go on standby again for 2 hours and keep repeating. So 12 times in a day or whatever time I want to change those. 2) Also I would like to use AA rechargeable batteries, but I think you're using something different. Is that going to be a big issue? 3) And lastly, can the above work with the timer display off, as it will be hidden and I want the battery to last as long as possible, as in charge/ change to charged ones once a month? Many thanks

[@doma9834]

Q1: P32, Set TA 5sec, TB 120min, Q2, you can use AA battery, but pls make sure output 12V, Q3: Press K1 for the fourth time and display “----” to enter standby mode and Press K4 in standby mode to turn off / on the display

[@gajananphadte3440]

How to put the display off in P31

[@giannismichael4146]

Its work with milisecond?

[@celmarfaemalim29]

Ilang motor po ba na kagaya nyan Ang kaya ng Time delay switch na pa paganahin sir?

[@fly4fun24]

I need to Findone timer that work with time C.. trigger time A activate For 12 Sec , stays OFF For 720 sec. then ON again For 12 sec. then OFF For 420 sec. and . the loop. (12 sec.ON-720sec. OFF- 12sec ON 420 Sec OFF) 12sec ON 72O sec OFF 12 Sec ON 420 sec OFF ........

[@idowulukmon642]

Pls bro what is the work of that red bottle in you pressing

[@gajananphadte3440]

It cannot be 12 Vdc as it has 12 volt regulator 78L12. Does anyone know what are it's so called signal input level

[@rimivw6268]

Pourriez vous la diffuser en français svp merci

[@DJSubAir]

Do you have a new link to the product as the current one is saying not available now.

[@PSYgoaHEAD]

Does it save the settings when supply is taken away?

[@doma9834]

yes,it is

[@Salim-pt4tj]

how can I program it to work on hrs and minutes for example to star motor after hrrs and 30 mis for 15 second for example

[@mohamadjararha7455]

Hello my friend, what is the maximum current of the piece and what is the current that it consumes when there is no load on it

[@Wako380]

Como le coneto a eso mismo que iso en este vídeo un Monedero electrónico??

[@chickenvsbigdog]

If i use the same power supply for both ends (9v battery) will it burn anything out?

[@koyasaitmohamed2983]

How set auto on

[@johnblair9260]

Instead of a motor can it operate a solenoid?

[@toksec8588]

Is there a work in (time) after switch and stop after (time)

[@fa046192]

Program 35 ?????????????

[@jothimanisethu3871]

Sir I want to buy. Pl give reference

[@MarcusAthaydes]

Can you help me? what is the program if I just want to count the time the button is pressed (triggered)?

[@IkmalRusli]

will the display off if it idles? or how to turn off the display ?

[@doma9834]

Press K1 for the fourth time and display “----” to enter standby mode Press K4 in standby mode to turn off / on the display

[@IkmalRusli]

@@doma9834 hi don thanks that is very informative let me try and see.😃😃

[@IkmalRusli]

@@doma9834 hi, sorry for the miss info i have only 3 buttons on my timer do you have any idea?

[@doma9834]

@@IkmalRusli sorry, i don't know how to operate your timer.

[@IkmalRusli]

@@doma9834 Its ok bro, i got the search online then

[@rioaditiyono8442]

Can it set to milliseconds for spot welding?

[@aminmoshfeghi8145]

Hi anyone knows where can I order thermostat and timer please

[@doma9834]

search delinx timer relay on amazon

[@doublea3895]

can i program it to turn the motor on for 10s after 4 hrs.?

[@doma9834]

P-35: Triggered, delay TA, on, delay TB , off TA 240min, TB 10s

[@tonyweavers_M0SHG]

Your Mic is not working!

[@Unicorn-bx4li]

Hindi pwede poro toro nalang walang sounds, hindi po namin maintindihan. Yon lang po...

[@陳建睿-b2p]

可以請問這要怎麼接線嗎 我買了一個都沒辦法動

[@doma9834]

在产品亚马逊页面的第四张是接线图

[@ToDoTips]

This is 7 function not 24. P11, P12, P13, P16, P21, P36, P8. Where are the other functions. This is just junk if other functions are empty. 这是7功能而不是24. P11，P12，P13，P16，P21，P36，P8。 其他功能在哪里？ 如果其他函数为空，这只是垃圾。

[@doma9834]

Video time limit， 如果你需要我可以送一个给你，附送说明书。