✅️ Programming a remote control or key fob for a Toyota Corolla Verso Easy Steps

✅️ Programming a remote control or key fob for a Toyota Corolla Verso involves a specific sequence of steps that must be performed precisely for the car to recognize the remote. The actual procedure may vary based on the model year of your Toyota Corolla Verso, so it's essential to consult the owner's manual or a professional for the exact steps for your vehicle. For the general procedure, you might expect a set of actions similar to the following:
✅️ Please note that this is a general guideline and may not work for all Corolla Verso models, especially newer or older models which may require advanced diagnostics or dealer-specific tools for programming.
1. *Verify that you have a fresh battery in the remote control.* If you suspect your battery is old, replace it before beginning the programming process.
2. *Enter the car.* Sit in the driver's seat with the driver's door open and unlocked. Have all the remotes you wish to program and the keys for the ignition with you inside the car.
3. *Insert the key into the ignition.* Do not turn the ignition on.
4. *Perform the programming sequence:*
a. Insert the key into the ignition and pull it out.
b. Lock and unlock the doors 5 times using the switch on the driver's door.
c. Close and open the driver's door twice.
d. Insert the key into the ignition and pull it out again.
(This sequence of actions may need to be done within a specific timeframe, usually within 40 seconds.)
5. *Enter the programming mode:*
a. Insert the key into the ignition and turn it to "on" then back to "off" once.
b. Lock and unlock the doors 5 times again using the switch.
6. *Finalize the programming:*
a. Lock and unlock the doors once more.
b. Press and hold the "Lock" and "Unlock" buttons on the remote simultaneously for 1.5 seconds.
c. Immediately after, press the "Lock" button on the remote for a second.
(If you have multiple remotes to program, you must complete the combination button presses for each one within 40 seconds.)
7. *Exit programming mode by opening the driver's door or putting the key into the ignition.*
8. *Test the remotes.* Make sure that each remote you programmed can lock and unlock the doors.
Again, this is a general guide and may not be accurate for all years and models of the Toyota Corolla Verso. If these steps do not work or if you are unsure about performing them yourself, it's important to contact a professional locksmith or a Toyota dealership for assistance. They have the proper tools and knowledge to ensure that your remote is programmed correctly without causing any issues with your vehicle's electronic systems.

[@oluwaseunesan9986]

Thank you so much. It worked 100%

[@IrfanKhan-rh4mm]

I got my remote programed because of your video. Thanks a bunch. You saved me trip to Toyota dealership and bill as well.

[@nidalalali3752]

Thanks

[@Rolandatw0w]

Got it back to life, thanks !

[@JayGillUK]

BRILLIANT! Thank you. Worked perfectly!

[@mikemuchene2045]

Thank you very much for your help mate.

[@zahir_attar]

Thanks a lot it worked ❤

[@antoninlepinay8610]

Hi ! Do you know where i can find a programmable key for my Corolla Verso 7p (december 2007) ? Thanks for your help :)

[@arditplakalli6628]

Hi! I have a problem with toyota corolla verso 2007 central buttons lock door, he dosn't lock the door when i press it. It does only unlock all the doors. What can i do?

[@user-vc3ur9iv7y]

I have the same problem it just opened and does not close it just the back left door and I hear sound in the lock door every time I click in the remote hopefully we can fix it there’s a lot of videos explaining how to fix it but all of them didn’t have the noise like i have in the lock door every time I click in the remote open and close but never give up keep searching

[@user-vc3ur9iv7y]

My car is toyota corolla verso 1.8 2008 7 Seating

[@FatherMathew]

Might be a broken door sensor. My Corolla Verso does the same if one door is slighly open.