Programming the Code 3 21TR Lightbar

sirennet.com/store/product/cod...
The Code 3 21TR Plus Torus LED 47" Lightbar delivers all the qualities the 2100 Series has been known for combined with Torus LED technology corner and directional lightheads. Torus LED technology lightheads provide far superior directional and off-angle performance. The 21TR Plus Torus LED Lightbar comes standard with Ten 9-LED Directional Torus Inboard Lightheads, Four 9-LED Torus Corner Lightheads, Two LED Takedowns and Two LED Alleys, Dimming Mode, and a Deluxe Central Controller with 23 flash pattern selections, flashing takedowns and alleys, NarrowStik function, and corner cruise lights. Economical, yet advanced, this lightbar offers standard features providing the brightest basic lightbar on the market.
The 21TR Plus Lightbar is also compatible with the Code 3 Smart-Pro 1050FPP Software Flash Pattern Controller.
A hook kit is included.
Features:
This is a 47 inch lightbar.
Available in 4 LED Color Configurations: All Amber, All Blue, Half Red/Half Blue, and All Red.
Ten 9-LED Directional Torus Inboard Lightheads.
Four 9-LED Torus Corner Lightheads.
Deluxe Central Controller with 23 Flash Patterns,
Narrow Stick / Arrow Stick Function includes: left, right, & center-out via 2 wire control.
Corner Cruise Lights.
Two Flashing LED Takedowns.
Two Flashing LED Alleys Standard.
Dimming Mode is included.
Black Top Lenses Standard.
Specifications:
Operating Voltage: 12 VDC
15 Foot Wiring Harness
Dimensions: 12.25" Wide x 2.1" High x 47" Length.
(The height of the lightbar with the Mounting Feet is 3 15/16”.)
Code 3 Five Year Warranty on LED Modules

[@Mantis_Shrimp99]

I own the tr21 and can not find a guide to help me wire this exact one properly or how many modes I can have wired they refer me to a pdf guide but it’s not for the tr21 and does not show how to wire it’s very annoying

[@CSILCPD]

I have bought an retired police cruiser and shipped it to Germany. I‘m refurbishing it for a police museum. Unfortunately the wiring for the code 3 tr 21 lightbar was cut. Can I simply „connect“ the wires or do I need to buy a new complete wiring? I have already contacted you for new clear housing parts since the old ones are kind of yellowish due to 10 years in service. Thank you very much

[@southwestohioemergencyvideos]

You don't need totally new wires.

[@James-dx4qd]

I know it's a old video but where can I buy amber light heads and the take downs and alleys light heads.

[@SIRENNET]

Please contact our Sales Team. They can be reached through email at: [e-mail]. Or feel free to give them a call- [phone]. We're available Monday through Friday, 8am -4:30pm PST. Thank you :)

[@roxfire23]

I have a code 3 ledx 2100 what wires do I need to program the flash pattern on it ?

[@SIRENNET]

Hi Austin :) Depending on the Modules in your 2100 series bar, patterns are adjusted one of two ways. For details on the processes, please visit page 8 and page 9 of the Installation Manual we've linked here: www.manualsdir.com/manuals/635208/code-3-2100.html?page=8

[@08_crown_vic]

how do I wire in an old Code 3 narrowstick with amber, red and blue traffic adviser bar. the Amber's seem to work but not the outer lights that are red and blue

[@SIRENNET]

Do you happen to have the Part Number off of the NarrowStik?

[@DankBlank]

Dumb question, could I use a FS Touchmaster Delta siren with a siren like this?

[@SIRENNET]

You sure can.

[@zoeyamiro2669]

This is probaly a dumb question but but Im thinking of doing and updated version of the Ghostbusters Ecto 1 no I know the original 84 car used the big clunky 47" Code 3 bar which had interchangeable rotator covers to customize the colors How would this newer system work to ensure it ONLY flashes in blue without any of the other colors while maintaining all the various patterns ??

[@SIRENNET]

Fun project😀🚨 You could either order the lightbar in just Blue, or if it's multi-color, you can program it to flash only the blue LEDs (this would be done via software or by selecting a pattern where only blue is flashing... depending on which bar it is.)

[@zoeyamiro2669]

@@SIRENNET How much could I expect 1 of these bars to run me cost wise ? Keep in mind I live in Canada incase your U.S. based I would require 2 bars front and back of the Ecto plus the wireing amplifier and speaker system and in car controls

[@zoeyamiro2669]

They would be mounted on a 2019 Cadillac XTS Kensington Hearse incase you need size dimentions

[@SIRENNET]

@@zoeyamiro2669 Oh great, we have an office in British Columbia now. Casey w/ our Canada Sales team will be able to help you. His direct phone number is 503-718-2098. You can also send an email to us: [e-mail]. 🚨👻

[@Bryan-ns2uo]

I’m not having any luck using the pattern select wire and placing it to 12v+ and tapping level3 warning wire.. pattern not changing.

[@SIRENNET]

Have you talked with the technical service department at Code 3? They're a great help when it comes to wiring. If you'd like to trouble shoot with them, please call [phone].

[@jasonwilloughby7259]

How can I get the steady burn to work? Is there a trigger wire specifically for it?

[@southwestohioemergencyvideos]

there is two pins on the back of each light module, tap both at same time with screw driver and hold to get steady burn

[@jamesallen7205]

What about if you want the steady burn to flash with the rest of the lightbar?

[@brandonhopper837]

So this bar is dual color? Cause the "features" makes it a little confusing

[@SIRENNET]

Correct, dual color corners and front inboards.

[@904lights]

How much is the weight of the 47" bar?

[@SIRENNET]

Roughly 34 lbs.

[@J4N1K]

Is it possible to program the Whelen Liberty ll like this?

[@SIRENNET]

It is :)

[@J_a_y_d_e_n.]

What is the wattage of the leds? 3w 4w 5w or 6w?