Programming the Crony/Motorola MT777

[@Eliokhairallah123]

Soo useful thank you

[@remyroelmiradora8221]

Hi sir, can you tell us the positive and negative terminals of charger and radio for MOTOROLA mt777-uv..tHANK YOU SO MUCH

[@bedtundy4793]

why I can't type 6 digit on my mt777. when I type the 6th digit of a number, it automatically says error...

[@nelsonokoro5806]

Hello how do you change the display to channel name instead of displaying frequency

[@Fuzzynights]

use the VFO/MR button to alternate between channel and frequency mode

[@VictorOmebije]

Awesome video

[@msmg6601]

Thanks Mr Frederic 👍

[@Salehq825]

thanks that's brief straight to the point without nonsense,, appreciated

[@ariagholizadeh3103]

how can i enable or disable roger beep on this thing?

[@jinspappanal]

Thanks Frederic. Following your video I have programed the radio in less than 10 min. BTW the price for this radio is AED115/- in Dragon mart.

[@ميلادذكرىجميلة]

ممكن تشرح أنت بالعربيه

[@mukheeduddin6235]

how to off frequency scanning indicator?

[@arunkp4525]

Hi.. i have one pair of mt-777 (400-470mhz) transceiver, i used this pairs one month without any problem, now both tranceivers going diffrent MHz ( means one is 136 to 174mhz and other one showing 400-470 mhz) its happend automatically.. can you give any solution for this.. how to make both in 400-470MHz..?

[@napoleondaou3795]

Hello, have for the same MT777, one them is working one way. Means when i speak, we can hear on the second talkie walkie. But if you speak from the second talkie walkie you can hear, you only see the reception bars but no sound . I tried with other talkie walkies, I have same issue. It is like a mute is put on in the settings but cant figure it out. I appreciate your help if you can .thank you

[@Fuzzynights]

You’ll need to double check your programming frequencies. Make sure the transmitting and receiving frequencies are the same.

[@mdsameerqureshi7136]

Excellent thanks for helping 👍

[@mesiakbarov5023]

Hello, I had a question about 777 planning

[@ehabkelleny2461]

How can I program it to channels below 400 like 160100 for example

[@Fuzzynights]

For that frequency range you will need a VHF band radio. This model is a UHF which is for 400-470Mhz

[@imranaasghar81]

Damn good video

[@KamrulIslam-he6ho]

Do u know how reset?

[@yash791]

how to change the frequency band to 136-174

[@Fuzzynights]

This Crony model is an UHF model (400-470mhz). If you want 136-174 MHz you need to buy a VHF model

[@aikeandreas7339]

HI Frederic, i followed all your steps and entered the right frequencies etc. When others contact me on my radio, the sound is really awful, i almost cant hear anything.. its not clear at all. Can this be a setting i missed? Also on my display when i switch on there is a small S in the bottom left corner, dont know how to get rid of that. appreciate your help Frederic. regards

[@Fuzzynights]

The small S indicates that your radio is in “scan” mode. My suspicion is something went wrong during programming or the original program from the factory is wrong. By pressing Menu followed by “1” you can enable or disable scanning. You can also try a factory reset by holding the orange button and the menu button simultaneously while turning on the radio

[@prakashthapa5508]

How to reset it to factory mode, if someone changed its settings? Before it's default channels are 10 and CT was appearing on the screen.

[@Adi-tm3ql]

Hiii , do you know what’s the range of it ?

[@Fuzzynights]

This UHF model is 400-470mhz

[@ساميالعنزي-ذ8ظ]

عااش 👍

[@alienUAE]

Thank you so much for the detailed instructions. My friends and I bought some these from DragonMart too. They came with default 14 frequencies. The seller said these are the standard frequencies for off-roaders here. But I noticed they aren’t PMR446. They are a bunch of 462 and so on. Shall we change them to 446s?

[@Fuzzynights]

The default frequencies in the 462 are not within the official license-free frequency range. The PMR446 radios and frequencies are license free and you will find the frequencies here: en.wikipedia.org/wiki/PMR446 Make sure the radio is set to Narrowband, otherwise your frequencies will be overlapping each-other.

[@redadeath]

I got no pro error what should I do

[@vimo93]

Thanks 🙏 alot

[@moykin.e]

How you find right channels numbers ??

[@minixg4857]

Why is it so important to make sure these specific things are off? What frequencies are these? Why did you waste time making this video with no usable information in it?

[@Fuzzynights]

This video was only made for our off-road club members. If you find no value in it, move on with your life

[@Aman-qc7qr]

I found it so helpful.What are you on about

[@jinspappanal]

He actually saving our time by this video. If I read the manual and program, then it will take much more time.

[@hanialmaaz8445]

Hello, could you please explain how to activate the VOX feature? Coz I tried everything on web but its not working

[@ميلادذكرىجميلة]

العربيه