Programming this One For All Universal Remote Control to ANY Device!

Video tutorial on how to program this one for all 8 device smart control to your devices. I go thru 3 different methods of getting this to work with your devices. In this video I am using the URC7880. If you don't have the codes in the list, follow the link below to the codes. If you need to jump directly to a subject within the video, click the time code to jump to that section.
www.oneforall.us/universal-re...
Simpleset Method/ 1:13
Simpleset Device Codes/ 1:36
Direct Code Entry/ 4:43
Teaching the Remote/ 6:21
Activities/ 8:30
Activity Combinations/ 8:45
Volume Lock/ 10:07

[@scifiwriter98]

I spent a half hour with the directions that came with the remote before I gave up and came here. I could swear I did the exact same thing, but it didn't work until I followed the directions here. The magic of KZbin made it work. ✨️

[@JLPicard440]

Excellent! Glad you got it working... 😀

[@prinzonic9896]

Damn, you have been a great help to me. I couldn't find my original Remote that came with the TV so I bought a replacement but couldn't work with my TV. But after watching your instructional lesson given, I finally got it set up. Thanks for not being selfish with such amazing knowledge.

[@JLPicard440]

Excellent! Glad you got it going.. :-)

[@Sincerely_lisajayy]

Thank you SOOO much!! Such a lifesaver, came here after trying for an hour with online instructions and failed then got it done in 3 minutes with your video lol!

[@JLPicard440]

You're welcome! Glad I was able to help.. 😀

[@airmix08]

You’re a life saver!! Thanks just programmed my Roku remote

[@JLPicard440]

Glad I could help... Thank U!.. :-)

[@zacharysmith8206]

I just wanted to say thank you for posting this video. It helped me out alot and I am grateful for your help. Subscribed😎

[@JLPicard440]

Thanks for the sub! And you're welcome... 😊

[@slapahoenrun]

Awesome!! I’ve tried to enter many codes and none worked. I watched your video one time and did what you did and it worked!! Thanks

[@JLPicard440]

Great to hear! I'm glad you got it working.. You're welcome..

[@Christopher-li6gg]

Thanks for the help, greatly appreciated!!!

[@JLPicard440]

Glad it helped!... :-)

[@msashleylynn83]

This video was a life saver! Thank you!!!

[@JLPicard440]

You're welcome!

[@groovygee824]

first of all i love this guy he is so great i hope you get everything you need in life

[@JLPicard440]

Thank you so much! You too... 😊

[@robcullen9984]

Legend mate, i wasted a couple of hours with instructions and no good, your way took two minutes thanks heaps Rob

[@JLPicard440]

Awesome! So glad to help... 😊

[@timray3860]

Thanks! Your video helped a bunch. I just subscribed.

[@JLPicard440]

Awesome, glad I was able to help! Thanks for the sub..

[@gnjojories2620]

You're awsome !! I'm kinda slow 🐌 😕 when it comes to electronics and You're explain things just so I could grab it quickly and get it done! Thanks 👍

[@JLPicard440]

That's awesome! I'm so glad I could help you...

[@isacgvm2031]

Thanks this helped so much 🙏🙏🙏

[@JLPicard440]

You’re welcome 😊

[@tracypeterson1263]

thank you> WORRKED GREAT

[@JLPicard440]

You're welcome! Sweet.. :-)

[@bayjay864]

Awesome thank you 🙏🏽

[@JLPicard440]

You are so welcome

[@michaelbustamante1754]

This dude nailed it! Thank you my man!

[@JLPicard440]

Happy to help! You're welcome..

[@blueribb99]

Since Logitech announced they are no longer making remote controls, I am looking for a replacement for my Harmony 665. My most important Activity is called "Kodi". I use an Intel NUC running Libreelec (Kodi) to play all my stored media. The "Kodi" activity turns on my TV, Yamaha Receiver and Intel NUC and selects the correct HDMI Input for each device. The code used for the Intel NUC running Kodi is called "Microsoft Media Center Extender". All the keys on my Harmony 665 work Kodi perfectly. Will the One For All remote allow me to select the correct HDMI Inputs during programming of the Kodi Activity?

[@JLPicard440]

I didn't know Logitech is not making remotes anymore! That's horrible. I can't remember if the OFA remote can execute a set of commands. If you have the manual handy, look for something called a macro or something like that to see if it can execute multiple commands. If you don't have the manual, the OFA website usually has all the manuals listed there to look at.

[@DarioRF]

you are the beast thanks 👍

[@JLPicard440]

Glad to help.. You're welcome..

[@m1tchello]

Thanks Buddy worked perfect

[@JLPicard440]

Glad I could help... You're welcome.. 😀

[@RaGoddess]

Yesss thank you so much 2020

[@JLPicard440]

You're welcome!

[@prestondavis2301]

You are a life Saver

[@JLPicard440]

Thank you! I really appreciate that..

[@l.m.mental2236]

Thank you!

[@JLPicard440]

You're welcome!

[@jaccourt9531]

Thank you it worked

[@JLPicard440]

You're welcome!

[@andrearamos4396]

You saved my sanity . Thank you .

[@JLPicard440]

Happy to help... 😀. You're welcome

[@TigerLove]

Does this work for xbox and ps4? And there's no silicone in the product correct? What materials are the buttons and remote?

[@JLPicard440]

I don't know what the buttons are made of. You'll have to check the OFA website to determine that. It might work for Xbox or PS4. If there's no codes for those, you should be able to use the original remote to set those up.

[@kerarants3550]

Life saver thank u

[@JLPicard440]

You're welcome!

[@marisolamezquita3914]

Thanks

[@JLPicard440]

You're welcome!... :-)

[@celestejohnson755]

I just got this remote and after set up it's still making me switch back and forth to sound bar for volume control and apple tv or tv and sound bar. Any suggestions? Thank you for your video! Want to be able to use the volume without having to switch it to sound bar.

[@JLPicard440]

HI, did you setup the volume lock? Here's an excerpt from the manual: If you always use one device to control volume, for example your TV or an AV Receiver, you can set up the Smart Control to always control that device, regardless of which device your remote is controlling. To do this: 1. Hold down MAGIC until the LED under the device blinks twice. The LED under the current mode key will stay lit. 2. Press 993 - the LED will blink twice. 3. Use the DEVICES key to select the Device you want to lock the Volume to. 4. Press MAGIC once - the LED will blink twice and volume is now locked. If there is one particular device you would like to exclude from the Volume Lock (and control its own volume), you can do this by the following: 1. Hold down MAGIC until the LED under the device blinks twice. The LED under the current mode key will stay lit. 2. Press 993 - the LED will blink twice. 3. Use the DEVICES key to select the Device you remove from Volume Lock. 4. Press VOLUME DOWN - the LED will blink four times and device is now removed. To unlock the volume and set every device back to controlling its own volume, the procedure is: 1. Hold down MAGIC until the LED under the device blinks twice. The LED under the current mode key will stay lit. 2. Press 993 - the LED will blink twice. 3. Press VOLUME UP - the LED will blink four times and Volume is now unlocked.

[@celestejohnson755]

Omg thank you!!!! Got it!! ❤️❤️❤️

[@JLPicard440]

@@celestejohnson755 Excellent! You're welcome.. 🙂

[@wilcd7340]

Can you hook this remote to 2 TVs? Also, how do you change devices? I programmed one of my TVs on “tv” and one on one of the other options but when I click devices it stays on tv

[@JLPicard440]

Yes you can use one of the other device buttons to add a TV.. I think there's a device button you can push and the light will change each time you push it, so keep pushing it until you get to the device you want.. "I think" i'm just going off memory, so don't quote me for sure..

[@hoodtraveltv7723]

Thanks 💪

[@JLPicard440]

You're welcome 😊

[@AlesundNord]

Dude your awesome

[@JLPicard440]

Thank you so much!

[@davidfaherty3709]

Please don't take offence but the start almost put me off watching your vid Saying that I'm so glad I did very good very clear and made me not give up on the one for all . thanks again

[@JLPicard440]

Awesome! You're welcome.. 😀

[@jeffmcbride6218]

The set up easy enough, in looking at the combo option 3 which is TV/Audio/Media…is there any way to have the power button operate all 3 simultaneously or will each device need to be powered up and down on its own? Thank you

[@JLPicard440]

Yes, I think if you set up an activity it will do that. I'm not sure about controlling it from the power button, but when you select the activity it will power on whichever combination you setup..

[@jeffmcbride6218]

@@JLPicard440 Thank you, I’ve set up combination #2 for TV watching, what I can see is that I’ll still need to power up and off each component on its own. I haven’t read anything that will allow me to power up or shut down all 3 components with a one touch of the power button.

[@JLPicard440]

@@jeffmcbride6218 Hmm... I never set up an activity on this remote. The activity function won't power on the components automatically? IF that won't work then you need a remote that can do a macro function. I know that works, I've done it with other remotes..

[@tina4896]

@@JLPicard440 if you set an activity all of the devices in that activity will turn on and or off with a long press of the power button.,…hold the power button for at least 5 seconds.

[@JLPicard440]

@@tina4896 Good tip! Thanks for the info..

[@bassmaker4real197]

Will this be able to control my sony str-k740p Av receiver

[@JLPicard440]

HI, a model number doesn't mean much. It should work. If you have the original remote, you can teach this remote those commands if it doesn't work for some reason.

[@HAllen-sk5ks]

Thank you

[@JLPicard440]

You're welcome

[@PatC22]

Anyclue if I can make this magic puppy control 3 things at once? I have my TV to my TV setting. Soundbar to soundbar. Roku to game. But I have to cycle them to TV on, sound up, scroll roku. It's a great remote and this will grow on me. But wondering if you have mastered this thing and if it's able to work like that?? Thanks!

[@JLPicard440]

Yes... You can set up a macro sequence... If you don't have the book, here's a link: www.oneforall.us/sites/default/files/2018-10/urc7880_manual_en.pdf Hope this helps.

[@PatC22]

@@JLPicard440 oh your awesome! Thanks so much!!!!!!!!!!!

[@JLPicard440]

@@PatC22 You're welcome... 😀

[@tarapadapanda4210]

I have One for all remote, how can I use in TCL TV , Please advise. It will be a great help, thank you.

[@JLPicard440]

It should work with a TCL.. If all the functions don't work, you can use your original remote to fill in the gaps for anything missing.

[@user-ir4lk8ml3y]

I have a TCL TV and somehow managed to lose the Remote, and so purchased your Universal 7955 model. The TCL came with a very limited active channel list, and I want to expand this list via some auto tuning app. So far I have selected 'Menu', 'TV' and 'customise channels' to select which channels appear, and cannot get much further than that. I really need an auto tuning option - does your 7955 unit provide it? If it doesn't , this device is going back to the retailer as it will clearly fail the 'universal' test.

[@JLPicard440]

HI, I don't have access to that particular TV. The remote should access the menu and that's where the "auto tuning" for the over the air/ cable channels are usually located. The TCL might be setup differently...

[@user-ir4lk8ml3y]

Hi, Thanks for the steer. The Menu sequence does make a reference to 'Signals', but I can't seem to access 'Freeview' channels. Do I need to go back to the retailer?@@JLPicard440

[@godcore223]

So my original remote doesn't have play pause, is there away to get it to work? On my old Logitech 650 it worked perfectly only issue is I have had it replaced 2 times

[@JLPicard440]

Hmmm. So the One For All won't work Play/Pause on your device by itself? Have you've tried all the codes already? If your Logitech did function then that means it's possible. The only other way I know of is if you have another remote like the Logitech that does function, you can use that remote to Teach the One For All the codes. You need some source to transmit the codes.

[@godcore223]

@@JLPicard440 so I spoke to customer service and they gave me codes for Netflix and amazon and it registered but doesn't work and yeah they didn't give me any codes for rewind etc with the Logitech It automatically assigned it even though my old remote didn't have it

[@JLPicard440]

@@godcore223 Aww man... that doesn't sound like a good solution.

[@vuevang3833]

Ty very much

[@JLPicard440]

You're welcome!

[@unknownone8479]

I can't seem to get the you tube button to work, amazon and Netflix works evertime. Any ideas?

[@JLPicard440]

Hmmm. If you have your original remote, you can program the KZbin button by teaching it.

[@yesterplaycafe3486]

So you can't select an Activity and then turn on the power for each device in that activity? You need to power each one on individually? Seems like a pretty big oversight for a universal remote. If I figure it out, I'll post the solution here. Just got one of these myself and that's the last thing I have to do.

[@JLPicard440]

Yes you can. I don't remember if I covered it in the video to keep it from getting to long. If you look in the book under activities, then go to macros on activities. If you program a macro on an activity you can push one button to turn on more than one device. If you've lost the book, just go over to the OFA website and you can download the manual there. Hope this helps... 🙂

[@tina4896]

If you create an activity all of those devices will turn on and off with a long press of the power button.. hold the power button for at least 5 seconds and all devices in that activity will turn on/off.

[@stuartgrimes]

Randy u hero

[@JLPicard440]

Thank u!

[@MenaSamuel]

How to set up two TVs? Maybe assign the first one to the "TV" button and the other to "STB" botton?

[@JLPicard440]

I believe you can setup any device on any button... (If I remember right)..

[@ChachiBreeshy]

Big Helpp Bro Preciate It 🙏🏾 If You Have A Vizio The Code Is 0

[@JLPicard440]

You're welcome! Thanks for the great feedback..

[@roguexxx3486]

Can you do a video on the factory reset ???

[@JLPicard440]

I found this on the OFA website. Give this a try and see if it works. To reset your remote to the manufacturer's setting please use the following procedure: Hold the MAGIC key down until the LED blinks once and then twice. Enter code 981 the LED will blink four times in total. You can now setup your remote again.

[@sentimental714]

Do u have to have a pipe in the back in the tv like an Arial before u can program the tv

[@JLPicard440]

I am not sure.. Do you mean an internet connection?

[@rogertyler3237]

I Have A Panasonic Akasc630 Audio System & I Tried Programing My Philips Eleit Remote To See If I Could Operate All The Features The Code I Used Was 1466 It Almost Programmed The Stations But It Just Toggled The Stereo Between Manual & Preset.

[@JLPicard440]

HI... not sure what a Philips Eleit remote is?? Were there more codes available? If so, did you try them all?

[@rogertyler3237]

@@JLPicard440 yep Sure Did

[@JLPicard440]

Does that remote have a auto code search? Also, is it teachable? You could use your original remote to teach commands that are not working..

[@rogertyler3237]

@@JLPicard440 if You An E-mail Address I'll Shoot You A Pic Of It.

[@wesleyben-charles6301]

Hi can you help me connect a urc 11 2910 (the new version) to a LG tv

[@JLPicard440]

Where do I get one?

[@rhondathomas6773]

i don't have the original remote to operate for you tube, netflix on my Sony TV. HELP

[@JLPicard440]

There's no way that i know of to teach these commands on the OFA remote without the original remote. Maybe go to bestbuy and see if they'll let you use one of theirs to teach this remote the missing commands? It's possible.

[@NGOCNGUYEN-ng9vu]

I can’t press the menu button to work on my LG tv from oneforall remote can you help?

[@JLPicard440]

Did you try all the available codes? If so, you have to use the original remote to teach the OFA remote the menu function.

[@svh86]

Hi can you tell me how I can get it to power my Apple TV box. All functions work but can’t get it to turn apple box on and off

[@JLPicard440]

Those don't have an on or off.. The Apple TV usually will turn on by pressing the select button in the middle of the 4 way arrow buttons.. They usually will power off within a few minutes after you're done using it..

[@JLPicard440]

Sorry for the delay in getting back to you. I just now found your response. If the volume lock is enabled that might be causing the problem. Here's an excerpt I found in the manual. This might be worth trying. If you always use one device to control volume, for example your TV or an AV Receiver, you can set up the Smart Control to always control that device, regardless of which device your remote is controlling. To do this: 1. Hold down MAGIC until the LED under the device blinks twice. The LED under the current mode key will stay lit. 2. Press 993 - the LED will blink twice. 3. Use the DEVICES key to select the Device you want to lock the Volume to. 4. Press MAGIC once - the LED will blink twice and volume is now locked. If there is one particular device you would like to exclude from the Volume Lock (and control its own volume), you can do this by the following: 1. Hold down MAGIC until the LED under the device blinks twice. The LED under the current mode key will stay lit. 2. Press 993 - the LED will blink twice. 3. Use the DEVICES key to select the Device you remove from Volume Lock. 4. Press VOLUME DOWN - the LED will blink four times and device is now removed. To unlock the volume and set every device back to controlling its own volume, the procedure is: 1. Hold down MAGIC until the LED under the device blinks twice. The LED under the current mode key will stay lit. 2. Press 993 - the LED will blink twice. 3. Press VOLUME UP - the LED will blink four times and Volume is now unlocked

[@chadhyder9774]

Must your tv be turned on? Because my tv does not have a on off button built into the tv

[@JLPicard440]

No, the remote sends out a power signal. The TV will recognize it as power. It will turn off if on and on if off. There's no specific on command or off command if that makes sense.

[@apostolosenglezakis3479]

Hello to there! I have been trying to find codes for Xiaomi tvs but no luck with the one I found ( it was a 5 digit code which didn’t do the trick ) . Any idea what it might be?

[@JLPicard440]

HI, if you have the original remote most One For All remotes are teachable. I can't remember if this particular one is, but probably. If you don't have it most remotes have an auto code search function...

[@emermurray3533]

Hi there. Can someone please help me ASAP... How do I turn on /off the subtitles on my TV with this new remote control?

[@JLPicard440]

U should be able to access that from the TV menu... Usually there's a button for it and if you have your original remote, you should be able to use that and it would be faster.

[@ayyo5971]

Mine won't connect to Netflix, I got it set to the TV but the bottom half won't work

[@JLPicard440]

You'll probably need your original remote to teach those buttons Netflix etc. They are made for a streaming device the way it comes from OFA.

[@jakesview4545]

Yeah mine doing the same

[@jakesview4545]

Did you ever figure it out ?

[@JLPicard440]

@@jakesview4545 Figure what out? I did answer AY's question, you'll need the original remote to get those buttons to work if that's the question.

[@MarianaOdalys]

What about element I know the code but idk what to press after I put the code

[@JLPicard440]

Did you watch the video? I honestly don't remember unless I go back and watch it myself.

[@DylanSpry-ry1ub]

Will it works on General Electric P-7120 VCR player? It made in 1986.

[@JLPicard440]

If it's an IR remote and you have the original remote, you can try the learning function and see. I have no way of knowing without trying it if it'll work just by putting in a code for GE..

[@donemu9096]

What I want to know is if this can be used for more than one tv at a time.

[@JLPicard440]

I think so.. you should be able to put a TV on one of the other device buttons your not using. I'm 99% sure, but not 100%.

[@shokdj1]

It worked the 1st time but the tvs reaction to turn off was too slow so passed it and I tried to set it up again counting the flashes but it’s not worked since

[@JLPicard440]

Hmmm.. that's strange. Have you checked the batteries to see if they're any good?

[@shokdj1]

@@JLPicard440 oh I sorted it I did it wrong I had a different model it turns out lol

[@JLPicard440]

@@shokdj1 Excellent! Glad you got it going.. 😊😊

[@RafaelPernia]

I do that exsct process. Worked for 2 devices. I'm trying to add a CD Player into AUD and there is no way. It blinks like it learned but then I hold Magic, the devices skip AUD. No matter how long I pressagic at the end of that cycle, it won't learn anything.

[@RafaelPernia]

Also, this thing doesn't unlearn. 976 doesn't do it. I want to completely delete a device. Does anybody knows how? Thanks

[@JLPicard440]

I think the AUD button is more for an amplifier like a sound bar, A/V receiver, Tuner, etc. There is a work around if you happen to have a DVD player, you can use a dvd to play a regular cd. OR you can try putting your CD player on the DVD button, although I am not sure if that'll work. The reset procedure from the one for all sight..: To reset your remote to the manufacturer's setting please use the following procedure: Hold the MAGIC key down until the LED blinks once and then twice. Enter code 981 the LED will blink four times in total. You can now setup your remote again.

[@RafaelPernia]

@@JLPicard440 thanks a lot! It kinda worked

[@JLPicard440]

Great!

[@pinguinomg]

For this remote is the other remote mandatory to program the apps

[@JLPicard440]

Yes if you're talking about the shortcut buttons at the bottom. Depending on the TV, you can access your apps another way.

[@1981rendon]

It's working with technics cd player?

[@JLPicard440]

It might.. if there's no code for technics, you'll need the original remote to teach the functions..

[@chloer1791]

Worked well but the ok button for the tv isn’t working. It’s just setting the sleep timer.

[@JLPicard440]

Are there different codes available? Sometimes if the device acts funny like that, it's the wrong code.

[@real1domino]

i got this remote today because my original tv remote is broke can this remote work on a skyworth tv?

[@JLPicard440]

I've never heard of that brand. IS that brand listed on the code list? This remote is teachable, but you'll need the original remote to make that happen..

[@real1domino]

@@JLPicard440 okay thanks and i think it was i forgot

[@Mafioso1731]

Does this work with devices that work with Blue tooth remote controlled devices?

[@JLPicard440]

HI, no it doesn't. Only IR devices.

[@jond1965]

Mine wont change device using the device button. Just stays on tv. I put in new batteries. Any ideas please?

[@edmund6432]

You have to program a code to the device first. It will let you pick the device after you press and hold the MAGIC key for two blinks, use the device select button to chose the device to program and enter the code. Now it will allow you to go to TV and whichever device you just programmed. More codes in, more devices you can chose from.

[@JLPicard440]

Usually it'll do that if the TV is the only device programmed into the memory. Did you program in other devices?

[@notredux1971]

Is there a code for Digihome?

[@JLPicard440]

I've never heard of that brand. I usually leave a link in the description to the codes.. you can take a look there and see if it shows up.

[@frankc9284]

Did anyone program this to there roku stick 4k? Does not seem to work for me

[@JLPicard440]

Hi Frank. The Roku stick uses an RF type remote. This remote is IR only..

[@hussainimca]

Can anyone help me. I have Mitsubishi Blu-ray player that has only one eject button. All controls like play , forward , rewind , pause etc can only be done using car in dash screen which is not working. So is there any work around to control this player.

[@JLPicard440]

I am not familiar with that unit. Is it for an auto? Did it come with a remote from the dealer? A universal remote will only work if it's designed to handle an IR signal from an external remote.

[@hussainimca]

No remote from dealer.

[@JLPicard440]

@@hussainimca That probably means its not capable of IR control... Im just guessing though.

[@elyruiz8798]

Hi i cant get my onn roku tv make it work with this control

[@JLPicard440]

HI, if there's no codes available for the Roku TV, you have to use the original remote to teach it. Is there no codes available for that brand? I don't have the book handy..

[@mrleadfoot4205]

what if u have a paramax and no code for it dog chewed up the remote i had i cant find a remote for it any were

[@JLPicard440]

Does this remote have the auto code search feature? I don't remember.. If so you can do a auto code search and see if it'll hit on one..

[@bovasberlin]

whats the thosiba s.bar code .

[@JLPicard440]

HI, I usually leave a link in the description to the codes.. if it's not there or doesn't work, then it's easy to google the OFA remote and the codes you need.. thanks.

[@lindastewart9551]

I bought a one for all remote.Looking for code for LG tv

[@JLPicard440]

HI, I usually leave a link to the codes in the description. If it's not working, you can go to the one for all site, they will have it there.. Thanks.

[@bigboytruck1754]

How do I get the input button to work

[@JLPicard440]

Try all the codes for your device to see if one works better than the other. if that doesn't work, then you'll need the original remote. You can use that to teach in any missing commands like the input. If you don't have the original then it's going to be a problem.

[@tjs22655]

I will never use the Games device setting; can it be used for a as a CD player?

[@JLPicard440]

HI, many remotes allow you to program any device to any device button regardless of the label on the button. I don't remember if this one in particular allows you to do that. I'd say to give it a try and see if it works... 😀

[@tjs22655]

@@JLPicard440 I am looking for instructions as to how to do this...

[@JLPicard440]

If it works, it would be the same procedure as I laid out in the video, but just sub out which ever device button. For example use the games device button for your CD player.

[@MrMichae26]

There seems to be no single digit for JVC, can you help me please

[@JLPicard440]

HI, the single digit codes are for a few popular brands. If you consult the code list, the JVC should be listed there. If you've lost. your code list you can see it on their website. oneforall.us Thanks.

[@floaty7291]

I cant control my tv with that remote im moving the circle and the tv dosent move can you give me a code to control my roku t. Plz

[@JLPicard440]

HI, I don't have any codes that aren't available on the OFA website. Have you checked on there?

[@RafaelPernia]

I'm buying this thing and keep it to myself so I can control anything at home when the other family members lose the remotes. I"m going to need 2 probably for all tv's receivers, ceiling fans, BD...

[@JLPicard440]

Check the cushions! That's where the remotes usually wind up... 😂. Thanks for the feedback..

[@dougdonahue]

How to program my all for one remote to my Sharp. Aquos tv

[@dougdonahue]

How do I program my Sharp aquas tv with a All for One universal remote smart controllll .

[@JLPicard440]

Should be the same as what I showed in the video except you would substitute the codes for the ones for Sharp..

[@barrybenoit]

1153

[@tjdelucio995]

What does S bar mean

[@JLPicard440]

Sound bar

[@zianperez8224]

🎉❤❤❤❤❤thnk u

[@JLPicard440]

You're welcome.. 😀

[@chrisc4733]

Do you know the code for a vizio

[@JLPicard440]

HI, I usually leave the link to the codes in the description

[@chrisc4733]

@@JLPicard440 thank you for the help with the vid

[@damonhunter7169]

How to connect the one for all to a Insignia

[@JLPicard440]

HI, should be able to use the same procedure in the video but substitute the code for the insignia. If it's a smart TV, you won't have any smart shortcuts available unless you use the original remote and teach the OFA remote any functions that are missing..

[@tracybiggers8565]

My Amazon button will not work and after following the learning steps to assign it... It still won't work.

[@JLPicard440]

It should work.. did you use the original remote to program it?

[@VurmeliTheBurger]

Is there a code for a sceptre tv?

[@JLPicard440]

HI, I don't have the code list handy... If you go to the www.oneforall.us site and click on the support tab, they'll have a code list there. If you are outside the US, you'll have to google the site address for where you are... 😀

[@jadbeth-396]

Code for Core Innovations digital converter?

[@JLPicard440]

Hi, I usually leave a link to the codes in the description. If that code isn't in the list, you could use the original remote to teach the functions you need.

[@jadbeth-396]

@@JLPicard440 thank you. Actually that is what I did last night. Your video was a 👍🏽 for me. Great video!!!!

[@JLPicard440]

@@jadbeth-396 Sweet!

[@albertoquim4204]

Hi could you please send me the cod of INSIGNIA tv

[@JLPicard440]

HI, I usually leave a link to the codes in the description. If it's not there or the link doesn't work, it's easy to google codes for OFA remote... Thank u.

[@anthonyalexandrou809]

What code ? I want to do Samsung TV. Got no remote. Plus my remote is different to this one your displaying

[@JLPicard440]

Ummm got no remote and yours is different... OK.. not sure what to do with that.. 😊

[@JLPicard440]

If it's a one for all, you should be able to look up the codes on their website..

[@LDNboy]

What’s the code for tcl android smart tv

[@JLPicard440]

HI, there's usually a link to the codes in the description. If no, you can easily go to the OFA website and they have all the codes for all the different remotes.

[@margaritocastro6318]

How do I connect my Roku tv

[@JLPicard440]

What brand is it? TCL, Hisense, Philips? Have you tried the codes for your brand?

[@laurenm5770]

Does this work for JVC?

[@JLPicard440]

It should. Especially if you have your original remote, you can teach any commands that might be missing.

[@User75853]

Help pls why is my tv code 4 digits

[@JLPicard440]

Do you have the code list for your brand of TV?

[@jarredmclees1727]

Why isn’t my Polaroid tv not connect to the one for all tv remote someone help me

[@JLPicard440]

Are there codes for Polaroid? If so, did you try them all?

[@grzechugrzechu667]

Witam mógłbym prosić o kody do soundbara medion MD 80075 żeby zaprogramować na tym pilocie. Proszę pomóżcie.

[@JLPicard440]

HI, I usually leave a link to the codes in the description. If it's not there or doesn't work you can easily go to the one for all website and they'll have them on there. I think their website is www.oneforall.us . Thank you.

[@grzechugrzechu667]

@@JLPicard440 dziękuję bardzo za chęć pomocy, co prawda jest kod na Mediona 2197 ale niestety próbowałem i nie działa ten kod na Soundbar Medion MD 80075...🤔🤔🤔

[@JLPicard440]

Is there more than 1 code for the soundbar? Sometimes if 1 code won't work, then there are several listed.

[@grzechugrzechu667]

@@JLPicard440 nie wiem znalazłem tylko ten jeden ale nie działa u mnie na listwie niestety.

[@mckenzieellsmore7444]

Code for Emerson?

[@JLPicard440]

HI, I usually leave a link in the description to the codes. Thanks.

[@Ave._.-]

How do u set up you tube

[@JLPicard440]

Hi, if your smart TV has shortcut buttons on the original remote, you'll need to use that to "Teach" the OFA remote that function and assign it to a button that you're not using. I go through the "Teaching" process in the video.

[@tag3266]

What is the jvc code?

[@JLPicard440]

HI, I usually leave a link to the codes in the description. IF it's not there, or doesn't work, you can simply google the codes for One For All Remote.. If any of the functions don't work, this is a teachable remote if you have your original remote..

[@imulippo5245]

Why can't you just turn it so i can see how the bottom is like, is it rounded or flat?

[@JLPicard440]

Thanks!

[@shayviv2318]

It won’t work for my DVD player

[@JLPicard440]

It should... what brand is it?