Project 080 | Angle Grinder Hack 7

[@serkisdav]

Make it Extreme best DIY channel. BRAVO brother

[@mariusjemand3272]

Серега Неоткуда YES!!

[@samuelburns8923]

Серега Неоткуда I

[@eulemitbeule5426]

Little tip for projects with belts: It works way better with convex rolls (like the skateboard wheel) than concave ones (the one you made). A belt will always center itself on the highest part of the roll (sounds strange, but you can see that effect at 5:12 for example: On the top it is centered, but on the bottom the belt is an the edge)

[@akbychoice]

Eulemit Beule same effect with a bandsaw

[@dreadpirate1337]

That's a great tip... Added to my knowledge.. 👍

[@FlyingShotsman]

Yeah, this thing badly needs belt tracking adjustment. The belt nearly came off late in the video.

[@Formula400Pontiac]

Exactly! You will find this used on all belt sanders. Cheap and more expensive use this feature.

[@AnttiBrax]

Eulemit Beule Thanks! Had to Google for an explanation: woodgears.ca/bandsaw/crowned_pulleys.html

[@1SimpleLife]

Showing how well the mod performs to the test makes the video far more impressive. Awesome!

[@aylamao9847]

honestly one of the best tool builds i have ever seen. i need this tool in my life, i think i will make one too

[@jedics1]

Probably the best design on youtube so far.

[@Aviatr23]

Finally found a way to make a knife into a shank. D block is going to love this!

[@ЮрийВатолин-я3щ]

Потрясающе ! Золотые руки и светлая голова.

[@00xero]

Man as someone who is just getting into welding and metalworking, you guys are seriously inspiring.

[@atVVV1]

I love that you used the grinder make its own parts! Its like making the chicken cook its own eggs.....

[@Mr.Gasparyan]

Extremely professionally built and filmed

[@Redneckmfg]

"Imagination is more Important then Knowledge" Albert Einstein You guys Fulfill that Quote 115% in Every Video you Post !!!Amazing Build, Amazing Edits !!!! I fricken Love you Guys !!!!

[@MakeitExtreme]

Thank you!

[@cuttheloop]

Cool! Amazing that it doesn't require any tracking adjustment mechanism. You should make a version a half width 72" belt, would be great for removing weld seems from the inside of square tubing.

[@ronwalsh]

Another great tool made by you guys. I am going to have to steal this idea, since I have about four grinders laying around. Thanks for posting this.

[@andreasadamou1403]

One more genius way to use the angle grinder! Good job 👌👌

[@MakeitExtreme]

Thanks man!

[@davomoto42]

Put a slight crown on the drive pulley, the belt will track true then. Awesome project, and not permanent!

[@jon4x4]

Amazing build.... your clothes you’ve worn, tell a deep a story of true craftsmanship.... #welder #grinder #metalCraft

[@sunny2900]

I haven't missed a single video from the start of your channel, and I can say this with confidence since day 1 you have produced quality content! I love you guys !!! Keep up the solid work I'm intruded too see what you will bring for us next time. Always keeping us on the edge Thanks!!!

[@choonwahyee9101]

Sander's are so solids ! Sharpening metal 's fast and easy 's ! Small in sizes , large in power's !!!!! Super's brain 's ! Super's DIY 's !!!!

[@Jase0001]

How could anyone one give a thumbs down! Great build! This Rock's!

[@allenmckinney9533]

Finally something I can make with my collection of tools. 👍

[@soldador1775]

Greetings from Venezuela, I am a great admirer of your work, and learned a lot from you, are the best in the United States, successful ..

[@pinguso656]

Ive seen keyboard cat, but skateboard cat is the first time.

[@spencerwells4523]

absolutely awesome haven't seen anything this high quality yet

[@MakeitExtreme]

Thank you!

[@Алекс-г2д]

СУПЕР👍👍👍👍!!!! ЗАЧЁТНЫЙ МИНИ ГРИНДЕР!!!!! МОЛОДЕЦ👍👍👍!!!

[@nomadautodidact]

Guys with shops like this make me so damn jealous

[@Mikefence]

THE BEST youtube channel !

[@MakeitExtreme]

Thank you!

[@IndraKurniawan-vk2qb]

wow....From An Angle Grinder To A BELT GRINDER!!!! Cool Project Bro

[@MakeitExtreme]

Thank you!

[@TomMakeHere]

I love the portable version! I might have to add this to the long project list...

[@АзимАхмедов-м7е]

Красавчик , продолжай радовать народ.

[@Doc_Fartens]

That's a pretty chill cat.

[@JimmysTractor]

Y'all are the smartest engineers on KZbin!

[@cartoon80s90s]

As always, amazing. And we get a cameo from "The Cat" in this episode. Super!!!

[@Gazman79]

What a beast! The sander is pretty epic as well.

[@doubledarefan]

Build something extreme for the Cat.

[@LeatherMadeSkateboarder]

I wish I could hop up, go to the garage and do what you just did so badly! That was remarkable

[@markfryer9880]

And the Award for the Coolest Shop Pet goes to Make It Extreme Shop Cat for not only riding a skateboard on the welding bench, but also for staying mounted while it is striped of one set of wheels.

[@Shanktuary]

The fact that this guy doesn't have 10 million subscribers is a indictment on the state of our culture. But everyone know what Logan paul and the Kardashians had for breakfast. YOU sir are quiet the tradesman. Impressive!

[@CaseyGray58]

Idk how I never came across this channel till now. Holy shit it is epic.

[@shanescholtz3686]

Right!!! It's like xmas whenever a new vid comes out

[@samersamer5484]

It is the creativity of your hands

[@lenkuffert7428]

Selling yourself short to call this a mere "hack". Super job!

[@eloyworkshop541]

You are impressive, you are undoubtedly a great reference for me, I follow all your videos and every time I finish watching one..... I feel like running to the workshop to manufacture, a big hug and greetings from Spain (google translator)

[@RochaKRG]

I think the same. Do it extreme, you should take a look at the channel of this type, it will only be a moment. Thank you

[@eloyworkshop541]

Thank you very much for the Rocha KRG recommendation, no doubt extreme is the lighter you have in your channel, you have me hooked more and more! A big hug, my friend.

[@murraystrand]

Nice! The cat was a great touch!

[@다큰맨]

항상 감사한마음으로 잘감샇아고 있습니다 감상할때마다 완성도가 으와 정말 감탄합니다 ㅋ

[@trevorpiccone3190]

Awesome! You should do a Skilsaw hack, I bet you could make something pretty cool out of an old worm drive circ saw!

[@heardashot]

Most excellent dude....now there's a neat bit of kit. Well done.

[@reforzar]

This is my favorite grinder hack. And now I want one.

[@wheezer345]

That cat is awesome!!! Such a calm kitty! :)

[@kalleklp7291]

Again you made an awesome job with just a few items from scrap. Cool..! Just one thing.. Maybe it would be a nice feature with an adjustment screw, to center the belt? It could be done with a M8-10 bolt and some nuts. Just a thought.

[@craigus6372]

By far my favorite channel on KZbin. The stuff you make is so sick. Keep them video's coming in bro🤘🤘🤘

[@MakeitExtreme]

Thank you! :)

[@princetikki]

your video production quality is getting crazy good!

[@MakeitExtreme]

Thank you! :)

[@rafaelfernandez5582]

This is best idea I have ever seen just saved me a couple bucks

[@julimaker4594]

No me canso de ver videos de este canal.Sois un diez .Saludos

[@elidreyer8485]

They make it look so easy!

[@STLRCDRAGRACECLUB]

i never get why people give thumbs down...........nice job

[@Mikhandmaker]

The kings!!!!!

[@aboamr1]

i always watch his videos at x2 speed :D

[@gilmarhackers]

Saludos dela La Paz, Bolivia. Un excelente trabajo de ensamblaje para lijados. Aunque no entiendo mucho su idioma, pero con ver con los ojos tus videos, me emocionan aprenderlas todos tus videos tutoriales. Gracias y felicitaciones.

[@bretcalvin1534]

some of the best build video's on youtubr

[@MakeitExtreme]

Thank you!

[@sariefidoe8398]

This guy is god gifted respect😨🙌🙌🙌🙌

[@ageofmau]

You're the best, again and again! Great ideas, great making, great video... great results!

[@tivinhatui123]

Perfect creation, the best of the best, but I love the cat than power tool ....

[@MakeitExtreme]

Thank you!

[@paulwyleciol3459]

I'm fed up right at that moment, somebody mounts the disc on the anclegrinder without protection and TEACHES so! I got hit by a small part once on the finger and nearely lost it. Blood everywhere! On the other hand: I LOVE to see you working! I ask myself, if the dancing of the belt stops, when the backwheel is very slightly conical as well?

[@valimdx]

You are very smart guys! Great solutions for everything in the workshop

[@RCVOODOO]

Your cat is AWESOME

[@DaxxTerryGreen]

Kick ass project!

[@osamahassan6817]

U are the best always kindly make it thickness planer for wood

[@mikelaffosse3233]

you guys are awesome, I only wish i lived next to you!

[@sanjaysami4315]

You are a genius ! Wow ! Brilliant!

[@crazycoyote1738]

Very talented guy!! I’m enjoying watching your creative videos.

[@МаксМашков-ш7ц]

Супер. Золотые руки.

[@aztec_rider1]

You guys make it look easy

[@fuadhuseynov6483]

My favourite KZbin channel.Nice video👏

[@MakeitExtreme]

Thank you!

[@_125.sumo.dk_8]

best channel on youtube

[@MakeitExtreme]

Thank you!

[@RochaKRG]

Gran ingenio! ¡Pero viniendo de ti, esperaba algo grandioso! de todos modos, ¡genial! un saludo de un youtuber español

[@mb_art_official]

I love your inventions. Great work!

[@MakeitExtreme]

Thanks!

[@WrenagadeWorkshop]

Man I need to get busy learning to weld, this build is awesome, thanks for sharing :)

[@MinhasA]

my new favorite KZbin channel! Have a good Easter

[@MakeitExtreme]

Thank you!

[@therry338]

This is just, genius!

[@lh6367]

I like the angle grinder series

[@stevehufngel7221]

Awesome! I just made one like that but i still have some issues with it cause it’s hard to calibrate it but it costed very low because i used scrap materials and longboard wheels.

[@Pufferzsola]

Angle Grinder hacks are the best!!!

[@tomrspears]

Best one I've seen yet. Great job.

[@MakeitExtreme]

Thank you!

[@ВячеславБашкирцев-ж2п]

Супер идея 👍👍👍 красавчики. Пошел делать себе такой😁

[@brendanmcewen2147]

U sir, r doing one heck of a job. Keep it up

[@terrandroid]

that is truly amazing! very nice build

[@MakeitExtreme]

Thank you!

[@j.patino8148]

You are the great mechanical master and craftsman , NINJA!!!☺. BUEN VIDEO👍

[@machineglanced3593]

Impressive I can subscribe 5 times

[@Stephen1455]

Love this blog! Less talk more walk!!!!

[@treffle17]

I would totally go to this guy like the old Karate movies and be like " Teach me grand master" with my head bow and everything

[@ДмитрийКарнаухов-ф9ж]

Хорошая задумка👍

[@Cactusworkshopchannel]

well done my friends!

[@MakeitExtreme]

Thank you!

[@fedeelias]

Perhaps you could add a tracking mechanism, just an idea! Great work as always!

[@AlekseyCamodelkin]

Handsome of his business. Very good video. And beautiful work.

[@PiazzaWoodWorks]

Awesome work

[@gmindgjerd]

Brilliant as ever.

[@tetsubo57]

This is very cool. And just reminds me I really need to learn how to weld.

[@visions2963]

your camera skills are getting good af ! well done !

[@MakeitExtreme]

Thank you!

[@ANDRELUIZBoaventtura]

Extraordinary, phenomenal, wonderful project. A million if I would like it if I could, one more inscription. André André Boaventura / Brasilia, Brazil.

[@1waukesha]

You always inspire me to go out to the shop and make something! Keep up the good videos!

[@jose3541]

Wow that is awesome I have limited space in my garage and I think that will work out great think I’m going to try to make one thanks