PROJECT ZX6R 636 BARN FIND Part 4- Dyno Tuning after Exhaust Install Moore Mafia ECU Flash

[@MaxysDailyMadness]

My guess is 113 HP pre-tune 131HP after. I was little off but damn that's a 1000 killer makes me more excited to get my 636 back!

[@busa_joe1159]

Until you race a fixed up 1000 and he leaves you like you ain’t even loving

[@MaxysDailyMadness]

@@badgerman23 you clearly haven't watched his newest video then...

[@MaxysDailyMadness]

What Would Grant Do you should try it some time maybe you’d actually get more than 100views 😂

[@MaxysDailyMadness]

@@badgerman23 you're clearly mistaken again brother but that's alright, goodluck with your videos ride hard keep that ninja on two 👍

[@ninja5ever1984]

drove to SC from GA to get my zx636 ecu flash by this guy today and I would highly recommend it, thanks Chris bike rides smooth and strong A+

[@jasongebhardt9194]

15:53 Is a man that worked his ass off all day doing what he loves!!! This is why I'll be sending him my ECU ! I pick up my 2023 zx6r tomorrow 🙂

[@thematurbo240]

Love this little bike! The sound is so sweet

[@daveyt4802]

Moore cool stuff on the MM channel! High 9's is the mark! Glad your business is taking off! It has 40 more cc's don't forget.

[@snootchie86]

This is a proper build series! From start to finish and can’t wait to see the results. Your team is doing a great job, glad to hear the business is growing! Keep up the good work.

[@adamsmith3471]

Dyno room looks great!

[@hingholo8027]

was looking forward to this for a while good shit chris.

[@rickylum709]

I can’t wait to go and buying my next bike from you guys I’m only 3:30 hours from you guys my self and my kids always watching you videos moore mafia and south carolina represent and other awesome video thanks chris 👍🏼👏🏼

[@edcauley9462]

I was waiting to see this one & it was well worth the wait!! You did not disappoint..WOW!

[@jeffiles7953]

Nice work,my 2013 636 made 121.75 on shell v power pump gas with a pc5,k&n air filter and a full Decat with Leo Vince end can. Kept original headers and cut out mid pipe cat and replaced with custom made mid pipe.

[@videocardzrule3097]

That’s insane.

[@rodneybrimer5171]

Big Kawasaki fan. Love the sound of the Brocks exhaust💪

[@mrnonamenobody6910]

The brocks pipe looks great on it. 👍👍

[@redline350zHR]

BROCKSMASH! HULKSMASH!! Damn tourettes is acting up again FAcKkkkk!!!

[@mrnonamenobody6910]

@@redline350zHR 🤣🤣

[@hooligan12003405]

Just ordered a couple shirts from your store. Thanks for the great content. Can't wait for the race with RG!

[@TeamMooreMafia]

Thank you!

[@donavan370z9]

Hey Chris! Can you do video on how to install those lowering straps. Also what are the torque settings for the caliper bolts?

[@huntingwheels7374]

more mafia where did you buy the ceramic bearings?

[@trylessego]

Two days bro???? Let's get that hitter out in one now I'm dieing to see this going to F up my fourth plans.

[@rohanbramble1046]

Black magic sitting on kill mode ready for deployment 😂😂😂💪💪💪

[@redline350zHR]

HAHAH That boiiii is always on ‘Stand-by KILL MODE 😈😈😈😈

[@djwilliams9842]

636 sounds good with the brock's. Gotta be the best.

[@kungfukenny4439]

I wonder where they got one, Brock doesn't make exhausts for these 600's much. He said there is no market for it. Lucky he got one for this 636!

[@illwill1090]

Dope setup

[@videocardzrule3097]

It looks like the Graves Tiranium exhaust system made more power than the Brock’s system?

[@thanosguitarist]

My 07 Daytona 675 116whp with ecu flash decat arrow slip on dna filter

[@needmetal3221]

Sounds so crisp on that mr12

[@HemivsNinja]

I might have some power left on the table my 636 made 116whp with a flash and tune on 91 octane.

[@hiram821]

Wooow that thing is power full 😮😱💯

[@214coolbeans]

Question. Are prostreet bikes faster or are Grudge bikes faster? Are there Grudge bikes out there running faster than that 6.38 that Teasly did? Wondering because Grudge bikes dont have the same restrictions as ProStreet. Thanks.

[@AbsoluteFidelity]

Grudge bikes are usually slower than Pro Street mainly because of budget. It is an open category, but money finally determines how fast a grudge bike or any bike will eventually be. I asked Chris the same question 2 months back and this is what he told me. It easy to make a grudge bike go faster than pro street, example take teasley's bike and remove all the restrictions in pro street (rider weight vs stretched length crap, turbo size, displacement), and in a perfect environment, it will go faster than 6:38. Money talks in this case.

[@214coolbeans]

Thanks Mark, i understand the money obsticle, but in Chris's case he seems to build his grudge bikes just as good or even better than his prostreet bikes, based on the walk through he did on Cash is King. This was a broad question as well as a personal question to Chris since he has both and they are very well put together, i dont see why Cash is king shouldnt be as fast or faster than black mamba, but ig we will never know because he would never show his time slips on his grudge bikes, which is understandable

[@AbsoluteFidelity]

@@214coolbeans he also did mention that his grudge bike was faster than black mamba, but that might be just to scare people, you know what I mean? Either way, we know its totally possible. I also suspect many grudge bikes out there are also pro street bikes with just a different shirt on when big money comes in to play.

[@jeffh278]

Automatic like because Chris always comes through

[@mendingmotos]

I love barn find bikes!

[@blainehouser4354]

Following! Great Talent! Great Content!

[@waliwhite1]

Once again Luv the videos and question did u sell the 636

[@MoHawk_1970]

Hey hey…..great job! Can you flash an ECU for an 05 636 with Yosh exhaust?

[@undecodable6145]

I would like to learn how you did the o ring on the chain

[@ichista]

Watch Brock's channel

[@coreyjohnson1756]

Great job! But umm....2500hp gsxr? You working to hard sir!😂😂

[@lewisdeclouette6342]

Appreciate you with the dope video

[@mrmuncheez374]

I don't see the new shirts on the website yet. I'll get one when they are available though

[@TeamMooreMafia]

They are up now!

[@mrmuncheez374]

@@TeamMooreMafia thanks Chris, I took 2🔥

[@blackwidowpowersports6037]

Run this thing on MR 12 and e85 was impressive for me

[@S58PSHIFTING]

Wow that is a fast 600..

[@bikeking7512]

Where can I get ceramic wheel bearings I'm from south Africa

[@gitanwhelanwhelan6124]

So sick!

[@pitbikecookracing3324]

I wish I could do your drywall finishing for you buddy. 👊👍

[@chrismoody1342]

Now add in the ram air to the equation. +3 hp ?

[@dr_tate]

Great video

[@metrohotness]

grats on 30k subs!!

[@TeamMooreMafia]

YAY! NEXT UP 40K!

[@xxsamanxx2009]

I want to see the Z800 on the dynamo!

[@NagaunleashWoW]

Hello Moore i was wondering if you ever you flash tune a Triumph Speed Triple 2018 and up if so where i can get your info plz.

[@TeamMooreMafia]

I can't do Triumph.

[@ryanlamson4131]

Is it worth doing ceramic wheel bearings and O-ring removal?going for high 9s! My 2019 Zx6r has unrestricted ecu, tie down, PCV, race filter, block off plates, Austin Racing decat exhaust so far. P.S. love the channel! Keep up the awesome work!

[@TeamMooreMafia]

Every lil bit helps on the quest to 9's....

[@jamesmills2896]

I have a 2016 636 with almost 30,000 on it and still no tune. Think I will do the valve adjustment this winter, and send the ecu in.

[@redline350zHR]

Still have the cat on your bike? What can is that i cant make it out in your pic! Thnks

[@hybachy352]

If and when able let's see a earlier 2006 CBR1000RR ECU flash/ tune maybe. Great videos and tuning congratulations 🙏🏾✊🏾

[@t.s.racing]

Chris, I have a sign outside my Dyno room, " Unsupervised children will be given a Cappuccino and a Puppy ". 🇺🇸🏍💪🇺🇸

[@maxpatil520]

#MooreMafiya baby ✌🏽Love ur style Love ur Work keep doing what U do the best hope to see U some day..👍🏼

[@aliatwi1300]

Was this a titanium headers? Will you be selling this bike, afterwards. When you're through with the drag racing

[@RingTuned]

Hey Chris I have a heads up street bike event tomorrow afternoon. My question is this (05 busa it's been unrestricted has a small airbox, K&N filter, pcv, pcv ignition mod, clutch mod, and 40 of giggle gas) I already added 3 degrees and saw good gains 160ish on motor 200 on gas. If I cut it 50/50 93oct and 110oct can I gain by adding a couple more degrees of timing. This event requires me to pull my bottle so I would love a little more engine hp.

[@TeamMooreMafia]

That will not help. Try 32 degrees of timing and straight mr12

[@RingTuned]

@@TeamMooreMafia dont have time to get to a dyno and nobody has mr12 locally. I blended 50/50 110 and added 3 degrees per my tuners suggestion. If it slows down I know it was a bad decision if it runs even 0.05 faster I can say atleast it was not a waste lol.

[@amulshrestha1556]

Bro did you see your back rim? Looks like its little bend or it is the way that work?

[@tylerbourn6920]

How does he shift without using the clutch?

[@caseymetzger1473]

Ive been watching your vids for a month or so now. I must say I am thoroughly impressed. I would like you to tune my 19 zx6r. Thank you

[@TeamMooreMafia]

Let me know when you are ready. Www.mooremafia.com

[@caseymetzger1473]

@@TeamMooreMafia most definitely

[@Jcarde22]

@@caseymetzger1473 I also have the same year zx6r...did u feel a difference with the ECU Flash? Were you able to see if top speed improved?

[@caseymetzger1473]

@@Jcarde22 i havent had a chance to get chris to tune it yet. other situations arose. i will say, with the re gearing i did it lost a little pick up but the top end is much better now. itll pull 130+ in third now.

[@onlyoneromeo]

Did you guys remove those o rings manually? How long did that take ? Do they sell chains that dont have any rings so you dont have to go thru all that trouble?

[@rockstarboxer]

That’s killer 118 on 600c. My dam Gsxr600 problem at 97 hp lol

[@j.a.r.family2576]

I bought zx6-r from a guy for 500$ about 8 years ago. Needed fairings and a fuel pump. He thought it blowin up because he couldn't start it lol. I spent 600$ ran beautiful and looked brand new sold it for a stupid profit. Wish I never did sell it

[@ashhadfasih8116]

What about cam tuning??

[@peterkroeker753]

Man ehats in that mr12....

[@davidcox1182]

Hello Chris, My name is David. I want to do roll racing on my 2021 zx6r, will this set up you did be good for that? Or is that a track setup. I need the top end power lol most the guys in my group have 1000!!!! Smh. There's two 750s as well lol so I'm just trying to keep up lol. Sending my Ecu to you next week as well

[@Ghilliez]

What size is the rear tire?

[@dp0289]

You already out of the shirts? Don't see them on the website

[@TeamMooreMafia]

They are up now

[@bluefox12factsbeforefeelin58]

Hey Chris, what would getting Block off plates do for this ZX636???

[@TeamMooreMafia]

Approx 1 hp.... every lil bit helps

[@alexisramos8041]

I have a question. I have a 2019 zx636 with ecu flash and now I change the gear ratio and running like a crap on midrange. The ratio affects the tuning or what happened

[@mikeyyatala6625]

Kawa Powwaaa. I need your advice. I own a cbr600rr 2007 with a full akrapovic system. Long story short I've lost a lot of engine braking in all gears. Does this sound serious or could it be something simple as a valve of some description. I am about 3000 km over a major service which I think a major is at 25,000 km. Hello from Australia

[@leadsled8961]

Why not have the head ported and get in the 155hp range.

[@dvs_15gt74]

Ill be looking at sending my ecu in once I’m back from deployment, curious if there’s a way to run two separate tunes for say race gas and pump with a switch. Also has anyone tried running e85 in bikes? I’m more so into the car side of performance and don’t see much talk about e85 on bikes.

[@effingracing-23r]

A guy I race with has an older (2012) ZX-10R that runs E85, he says with the power commander it makes another 10 hp over 93 octane...plus it runs cooler

[@dvs_15gt74]

Scott Fortner I don’t know much about tuning on the bike side of the world, power commander have their own e85 files or who is he tuned through?

[@effingracing-23r]

@@dvs_15gt74 I believe he told me PC has an e85 file and had his ECU tuned by a local guy, but I'll ask tonight at the track

[@dvs_15gt74]

Scott Fortner cool I appreciate it👍🏼

[@effingracing-23r]

@@dvs_15gt74 His is a PC5 with an E85 map

[@mrtree1368]

A 636 minimum octane is 90 so how did you tune it to 87?

[@clay3982]

Can you tune 2002 CBR 600 F4i ecu's?

[@jayh7310]

Was the tire spinning while on the dyno? Looks pretty shiney

[@Lineman22705]

I just bought a 2021 ZX6R. I want more horsepower and a stronger clutch. What would you start with for mods?

[@buildingracingvideos4714]

What kind of tuning needs to be done to run mr12?

[@903assengsxr7]

So have you done the one mod that really gives it power

[@TeamMooreMafia]

??

[@903assengsxr7]

Moore Mafia 4 more injectors in top of airbox dosent that bike only have 4

[@apexhunter2k]

Great video man. 600s have come a long way. My 98 750 made 115rwhp stock and around 126 after a full system so this thing is making some good power. The new 750s with similar mods as this are putting out around 135 hp.

[@adrianodriscoll7805]

Hy . Good job . Did u do any clutch mod yet . I'm waiting to see what u do as there is no clutch mod available for that model. I find the clutch on mine to be very snappy. 👍👍👍

[@TeamMooreMafia]

I have not touched it yet. That's next on the list.

[@motomehanicar459]

That is 750 performance! Great!

[@gbolt5602]

Zx6r 5gear 139miles dyno pull/////gsxr 750 5gear 160miles dyno pull....if measure 750 with 4gear would see 140whp or -1/+2sprocket

[@greenscreen101-83]

Do you not get 99 octane fuel in America

[@blackwidowpowersports6037]

That’s some damn good numbers on MR12 but the fans for your Dyno room are not enough Carbon monoxide is going to be too high I have some good fans leftover from my last building

[@TeamMooreMafia]

Hit me up through email and let me know what you have. Www.mooremafia.com

[@loganseyfert6516]

Shirt should come with big country on it to with that killer hair due

[@MrHannible]

That GSXR is embedded in his brain lol!!!

[@EastSideNYC]

What tires is he running?

[@guskenrick]

stretch kit needed

[@that1guycasper187]

Put a little 10hp nitrous jet in it

[@j.a.r.family2576]

Man I just looked up your background and I'm so sorry to hear your head of security passed. BEAUTIFUL PUP!!!

[@AJAXLDS]

I know I'm commenting on an old video but is this Brock's a one off for the zx6r? Don't see it on the sight, or maybe I'm blind? 😂

[@kuron252]

Your not I was looking for the same thing they dont stock one for a zx6r

[@ekulfitz99]

120 pump 131 mr12

[@420mrarg]

Why tune on 87 when the bike is meant to use no less than 90 octane?

[@awkwardfish5885]

Damn this thing is pushing near 750 power

[@kungfukenny4439]

Damn man how did you manage to get a Brocks Performance exhaust? They don't really make exhausts for 600's.

[@TeamMooreMafia]

That's about to change. We are partnering up to get some new products out there for the zx6r!

[@Rodeshion]

Lmao , damn bro you don't know who much you spent, how much horsepower you got or what kind of bike you have. Lmao nah just messing with ya man good job and can't wait to see the next one. 👍

[@TeamMooreMafia]

😆

[@project_98]

What's it mean to flash the ECU?? Ya I know I'm dumb lol.

[@Jackofalltrades-vy1jx]

Makes me want to bring my 08 gsxr 600 down there and see what we can do with that, can't have no kawi out running me 😂

[@86250r]

You will need more than a bolt on 600 to take this 636 lol

[@carlosbrown9768]

That's a bad 636...what happened on that pro street

[@davidhenderson6497]

DAMN!!!!!!!!!!!!!!! Love it

[@johnJones_]

Back tire spins out of round needs broken down and spun 180 degrees

[@Yesitsqk]

Need this done to my 636 I’ll be sending you my ECU

[@TeamMooreMafia]

Www.mooremafia.com

[@bluefox12factsbeforefeelin58]

Will this tune work for 2018 zx636?

[@TeamMooreMafia]

Yes

[@ShortyDawgy73]

Why did you run it on 87 and not 93

[@jonty4664]

👊🏻✊🏻☝️