Best CLP? Hoppe’s 9 vs Break Free CLP, Slip 2000, Ballistol, Frog Lube, Extreme Force, Clenzoil

[@ProjectFarm]

Here’s the list of products reviewed. More details in the video description. Thank you! Clenzoil: amzn.to/3KkWonM Break Free CLP: amzn.to/3tpqLmQ Slip 2000: amzn.to/3Ftbynb Frog Lube: amzn.to/3qsBB9X Hoppe’s: amzn.to/3AaTi13 Extreme Force: amzn.to/3fkFRBQ Hoppe’s 9 Kit: amzn.to/3zWH4J6 Ballistol: amzn.to/33vaTnV Fluid Film: amzn.to/34P0q7A

[@d.m.3822]

Can you do tractor hydraulic fluid? Thank you

[@BigBlueDog8]

Need to do an updated version of this and include Lucas gun oil and Super Lube with PTFE.

[@undoubtedhoundh253]

Could you do another test adding "shooter lube" to the list

[@tomwolf5831]

Really need to test Gunzilla brand

[@jamiepinkston7804]

It would be nice to see a part 2 of this with a few of the best performers from this test compared to Rem Oil, 3-in-1 oil, WD-40, synthetic motor oil, etc. Thanks!

[@ProjectFarm]

Thanks for the suggestion.

[@DreamRoadpl]

Yes, I also think that including a motor oil as a reference would be great. It will probably fail in the cleaning area but wear protection under various conditions should be excellent. My personal strategy would be to use a separate product to dissolve copper, lead and carbon deposits and then luse motor oil for lubrication.

[@jacobbreazeale1816]

That's a great suggestion

[@colgesuks]

Surprised that the Lucas Oil CLP wasn't featured in this video.

[@travisa2563]

Agreed. I’ve been using a mix of trans fluid and mineral spirits

[@Wk-is8eh]

Anytime Project Farm says "We're gonna test that" companies start sweating nervously. I love how you test things and prove/disprove any marketing wank.

[@ProjectFarm]

Thanks!

[@brenj]

@@ProjectFarm right to repair could use a voice like yours! Farmers newer trackers have become a 'specialist' product, which is a shame.

[@packinaglock]

Yea, usually before I buy stuff I come to the channel to see if he’s reviewed it. I know I’ll get a no B.S. review of the product.👍

[@Thewatchinglad]

This one 😂 is the one ☝️ lol 😂

[@charleywalker2982]

Yea it’s hard to get unbiased test like these, thanks for staying sponsor free.

[@garyleahy4537]

May I say first of all that it never ceases to amaze me the amount of effort that Todd puts into these reviews and tests. He uses equipment and procedures that 99% of us neither have access to or patience to perform. Simply outstanding. I've watched several of his videos on products I don't even use simply because I love his approach and attention to detail. As to this particular test, it substantiates what I've thought all along. I've used Hoppe's and Break Free CLP for years not just on my firearms, but on different things that require similar cleaning and protection. Another thing, as I'm sure viewers have noticed, is that some of the more highly touted, sponsored and advertised products didn't perform nearly as well as the "old standards".

[@1958PonyBoy]

After watching this, I went out and bought the Clenzoil CLP. I also bought some of their grease to use where it's needed. Cleaned a couple of guns with it and they are working and looking great. Time will tell how well it works in the long run.

[@ProjectFarm]

Thanks for sharing.

[@ag95mboy]

I’m new to firearms and just happened to but Clenzoil a few weeks ago to clean it the first time. So far no complaints!

[@1958PonyBoy]

@@ag95mboy Yeah, I'm working on two S&W revolvers right now. They had been stored dirty years ago and are in some need of deep cleaning. For the really nasty stuff, I just spray on some Clenzoil and let it soak a while before scrubbing with a brush. I also like the fact that the odor is so mild that I could use this inside the house if I wanted to. Not like the old school solvents.

[@elizabethgrassi9444]

@repentandbelieveinJesusChrist4 on KZbin........

[@donaldpowers3314]

@Repent and believe in Jesus Christ he said that many are called few will be CHOSEN. Or to clarify. As he said why call him Lord and do the things he says. Also said that if we live in his words and if his words lived in us then we will know the truth and the knowledge of the would set us free. (From being deceived)

[@DamplyDoo]

This channel has some of the most detail oriented content I've ever seen, congrats

[@ProjectFarm]

Thanks!

[@dustinl4420]

The extent, time and consideration you put into all of your tests is mind-blowing and borderline overwhelming in a good way. They just keep getting better! This man must be protected at all costs!

[@ProjectFarm]

Thanks!

[@davesnothere2782]

another national treasure!

[@beardedslavbrew615]

We all have this man to thank for leading us to good quality products! Awesome video and great work as always PF!

[@ProjectFarm]

Thanks and you are welcome!

[@manyfeather2knives423]

Problem is that after the test Amazon or others sellers double the cost.

[@mr.tall-man1573]

@@manyfeather2knives423 Like how AT205 was nowhere to be found after Scotty hyped it up. It's back at Napa for $20 now finally.

[@danhoward4049]

@Repent and believe in Jesus Christ What did they clean and lube their firearms with? Asking for a friend.

[@gpzjeffrey7974]

In the Army there was only Breakfree CLP. That was it. We cleaned our rifles every single day in the field. That was always second on the priorities of work, right behind maintaining security. Your tests reinforced what I always intuitively knew, minimal corrosion protection with the CLP. We applied more in the rain, less in the sand, and cleaned them every day.

[@ProjectFarm]

Thanks for sharing.

[@timtorkelson7201]

Had a well seasoned gunsmith tell me many years ago that I should be using Breakfree CLP,good stuff!

[@WhyitJellyDonut]

@@timtorkelson7201 In dry conditions yes. Its not very good in the rain or humid enviorment.

[@WhyitJellyDonut]

I also had the same experience while I was station at Fort Campbell, our weapons were rusty bitches.

[@frontyardfirewood]

Clp is amazing. Works perfectly. No matter how much carbon is on the 240B. 😂😂 it will be clean asap.

[@adama1294]

I might have to switch gun cleaners to cleanzoil. The wear scar was outstanding I might not even use grease on the sliding surfaces. Break free came to a close second, but I live near the ocean so I want the better corrosion resistance. This was very comprehensive and would let people know what they would like depending on their individual requirements.

[@bigt1877]

Same! I use shooter lube so I would have liked to see it in here but clanzoil looks like my new replacement

[@D3M3NT3Dstrang3r]

I think I will continue using Breakfree CLP and add some Froglube last to prevent corrosion.

[@TheSphongleface]

He did not test it with a gun and how do you even do that? Does ANY oil really help? Not much.

[@kevinm594]

You should check out weapon shield.

[@bigmike-]

Honestly, it might make sense to use the Cleanzoil as a base and mix in your own secret blend of 11 herbs and spices to make it better. Right off the top of my head, I'm thinking a mixture of Cleanzoil, Moly Grease, and either graphite or Teflon powder might be the ticket.

[@rlambert9419]

I've heard over the years that Hoppe's is the go-to. Thanks for taking the time to perform this great test and opening my eyes.

[@ProjectFarm]

You are welcome!

[@Gunners_Mate_Guns]

Hoppes No. 9 still is the gold standard for ordinary bore cleaning, IMNSHO by far the hardest part of routine firearm maintenance. If your bore is heavily copper-fouled (far too long between bore cleanings), then a judicious application of Shooter's Choice is in order to get rid of all those copper deposits. Shooter's Choice is wonderful stuff, but it is essential to follow the instructions to the letter or you will cause permanent damage to the gun bore, and it should not be used as a normal bore cleaner because of how aggressive the chemicals in it are. Use SC for a particularly heavily coppered up bore once, then stick with No. 9 thereafter, cleaning once every 20-30 rounds with centerfire rifles.

[@thecmlegend]

@@ProjectFarm Amsoil makes gun lube!

[@CplSkiUSMC]

This one was aimed straight at my heart. I've always used Hoppes#9 for cleaning but I use oil for lubrication. You did not feature the brand of oil that I use, and it has a very good reputation, but that Clenzoil lubricity test was amazing and I think I will look for some of that. What a great test... I eagerly look forward to your videos every Sunday and today was a real treat!

[@ProjectFarm]

Thanks! Glad to hear!

[@stoptrackingourdata8158]

This was a great review for all in one CLPs; but I'd love to see a review on the solvents tested by themselves, oils tested by themselves, greases tested themselves, and even dry lubes as well. I think this would provide a clear winner for each job.

[@ProjectFarm]

Thanks for the suggestion.

[@CitiesTurnedToDust]

especially since CLP is trying to do somewhat contradictory things so all in one doesn't seem like a good idea to me at all.

[@samthetoolman8068]

@@CitiesTurnedToDust I don't think all in one is a any good you need two step one to clean and one to protect and lubricate

[@facenameple4604]

Clenzoil's lubrisity test is impressive, so much so I think it should be tested in other oil-applications outside of intended usage.

[@j.petisch]

I sense the impending death of a lawn mower....

[@ProjectFarm]

Thanks for the suggestion.

[@FrostCrispz]

Its a good thing they have a multipurpose version of clenzoil

[@gumwap1]

*Lawn mower cowering and shaking in the corner*

[@notafinancialadvisor8087]

@@gumwap1 Briggs sacrifice to the gods of Stratton

[@Bluesky5553]

Having recently gone to Clenzoil, I can honestly say it is the best I've found so far at cleaning up the gunk and residue. Since I'm in Florida, I'm not going to worry about it freezing on me, but I was surprised at that part of the test. Very nice testing sir, and very helpful to us firearm guys.

[@ProjectFarm]

You are welcome!

[@patdennis3751]

When I was in the army when we got back from the range we had a can of spray carburetor cleaner to flush out all that carbon and dirt. After that it was a toothbrush, laundry soap and the hottest water we could find. (Mess hall imersion heater to rinse. Rifle would instantly dry and then we lubed up. GIs always find the fastest easiest ways to get it done cause the armoror would kick back any weapon with the slightest amount of carbon.

[@shanecabbage2187]

Sharing this glorious state of Florida with you, and it looks like I'll be investing in a bottle of Clenzoil as well.

[@HomesteadOnThePreserve]

Yeah, i'm in South Florida and the Clenzoil was most impressive. Will definitely buy a bottle. I'm curious how it would stack up against my personal favorite, Lucas "Extreme Duty" CLP.

[@patdennis3751]

@@HomesteadOnThePreserve Mark Novac from S. Carolina, one of, if not the best gunsmith in the world, swears by the Lucas gun oil.

[@MrAiptex]

I say thankyou sir, for producing another quality test. You make buying a quality tool/item much easier. Saving me money.

[@ProjectFarm]

Thank you very much!

[@ottokiehl5413]

Thanks for another great test. Something to realize is the one thing that Ballistol does that NONE of the others do is neutralize the corrosives from shooting black powder or ammunition with corrosive primers, which a lot of older surplus ammo has. It also does not negatively affect wood or leather.

[@ProjectFarm]

You are welcome! Thanks for the feedback.

[@jonkrier]

Yeah, I was hoping the Ballistol would perform better because I use it for its other properties (I like old guns), I didn't want a reason to buy yet more products.

[@markldavis1]

@@jonkrier Exactly my thoughts

[@dontblameme6328]

And it's non-toxic. I have used it to fry eggs in the field.

[@hondaservicecenter]

​@@dontblameme6328smelled worse than if they wouldve spoiled

[@davep.7099]

As a Marine, I was rooting for the Break Free. It is the best in all categories but you do have to shake it 2000 times and have a Staff Sergeant motivating it reach its full potential. It also doubles as an after shave that the ladies love the smell of. Ok, not so much but my vote is still for Break Free.

[@ProjectFarm]

Thanks for sharing.

[@DesmoProfundis]

I hear it's good when drizzled over crayons. Thanks for your service, Marine. -Retired Army SFC

[@beardedslavbrew615]

@@DesmoProfundis 🤣🤣🤣🤣

[@never2be07]

Break Free smells exactly like "Sex Panther"

[@INCREDIBLEBULK88]

I shower in that shit

[@MineEngineer]

I remember for my 8th grade science fair project, I compared the properties of gun oils. I was a Hoppes fan until I did the testing. Since then ive been using the Break Free CLP. Id like to note that when compared to Rem Oil, Hoppes oil, and another gun oil I don't remember, it exceeded in corrosion resistance. It may not be the best CLP at rust resistance, but it was better than the mainstream names in the gun oil industry. Great test Todd 👍 keep up the great work.

[@sheerwillsurvival2064]

Breakfree CO is great corrosion resistance and for long term storage. CLP for every day or week use

[@DavidLLambertmobile]

I used Ballistol on knives 🔪 guns car stuff since 1997. It worked well for many years. I'd use a gun oil on the firearm barrel for added protection. Slip 2000 EWL is a great product too. I expected it to perform better.

[@bignuance]

As a mechanic that works on fighter jet weapons systems in the USAF, I can vouch for Breakfree CLP being a great choice for extreme conditions as we use it on several systems. :)

[@ProjectFarm]

Thanks for the feedback. Thanks for your service in the USAF!

[@drjoe71]

Issint that confidential. Im just messing around, dont SWAT me :)

[@bignuance]

@Benjamin C. Hey, none of what I disclosed is controlled information. I just mentioned a mil-spec lubricant used for aircraft throughout the DOD. All of that is common knowledge. I did not present any opinions on behalf of the USAF, I just said that what we are provided with seems to be effective based on my experience. As far as me disclosing that I am in the military, please let me know if there is a DOD instruction that states I can't do that. It may not be recommended, but in real life it would be fairly tough to gather more than a name from what I have said here or anywhere.

[@cheif1776]

@@bignuance ngl I think ben might be joking around

[@509Gman]

@@cheif1776 nah he ain’t. Old AF guys always act like they got the keys to Area 51 in their junk drawer in my experience.

[@CaptainCreampie69]

I had never heard of clenzoil. I think they just got a new customer. It doesn’t get below 0 here so I wouldn’t need a lubricant that remains in liquid form at extremely low temperature. Great video.

[@ProjectFarm]

Thanks!

[@humanresource9659]

A good thing to note; The lubricity test should be the most important factor because we can clean off dust or even light surface corrosion but we cannot replace metal that has been worn away. Great video, keep on testing

[@df3624]

So a good question I have is, would Break Free's LP perform better than the CLP being that it doesn't have the cleaning agent in it and is directly for Lubricating and Protecting.

[@papermoonmarc]

@@df3624 I'd be interested in him testing that as well. I hope he adds that to part 2.

[@daflea66]

Except that this test doesnt really mimic what parts go through. I have used Ballistol and Hoppes since forever, and none of my firearms have any wear other than bore/chamber from round count. Like, zero wear.

[@lanzer22]

@@daflea66 I think wear and tear experience is pretty subjective, with some people having fired 500,000 rounds and others in the thousands. Different firearms also have much different tolerances. An $800 firearm will have less wear than a $2000 Les Baer or WC that has tight tolerances, and in both cases the wear probably won't be noticeable until you rest them on a bench rest and test fire at 50 yards. I don't compete so I doubt that I can really benefit from the differences in all these excellent oil. :)

[@daflea66]

@@lanzer22 Im saying a straight up bearing test I think is extreme, there arent any conditions in a gun that would do that. I use the brands that did poorly here and have 0 wear that isnt supposed to wear, like extractors and chambers

[@pauleyboy6448]

I dont know how he does it but this man takes the time to respond to soo many people, that alone shows how much effort he puts in his channel! Not to mention the time he puts in his videos. Amazing content

[@ProjectFarm]

Thanks!

[@vincentbearinger2242]

You got that right a lot of what I buy depends on his diagnosis of his products that he tests

[@electronicsNmore]

It's been a while since we've seen one of your extremely thorough oil testing videos. :-) Can't wait to see which one performs best, I need some.

[@ProjectFarm]

Thank you very much! By the way, GREAT job on your latest review!!

[@m0neez]

I love it when pros pump each other.

[@HoldMy1911]

@@ProjectFarm Seems that a few of the lubricants didn't reach their peak performance until they heat up. Which would make sense, as the heat generated when you shoot is extreme; even with one shot. With this in mind, I believe the Frog Lube is actually better than represented.

[@dgunearthed7859]

​@@ProjectFarm Please include G96 next time. I've seen that perform VERY well in other provider's tests and I use it.

[@blueheeler4807]

@@ProjectFarm great video! A number of folks are using Mobil 1 oil also; would it be possible to do an add-on testing comparing these with Mobil 1 0W, 5W, and 10W ??? Thanks

[@donaldham308]

The world needs more people like you so we can make sure we’re not falling for product lies and marketing.

[@ProjectFarm]

Thanks!

[@DouglasNorman-im6bm]

​@@ProjectFarmhe's right though. Thank you. There's so much BS out there it's difficult to differencheate what's what. Your channel is a priceless tool to all of us who have to watch our money. I hope you keep on doing what you're doing for years to come. Rock on man & stay safe out there. ✌🏻.

[@Renassainceman]

I've use Hoppes #9 solvent for my entire lifetime (I'm 65 now), and your test proved that it is at the top of the list as a cleaning solvent, which is all I use it for. It excels in that role. However, I always follow up with a protective wipe of oil for the corrosion protection. You can't argue the fact that Hoppes has been making Hoppes #9 product for almost 120 years. Must be doing something right!

[@ProjectFarm]

Thanks for the feedback.

[@peetsnort]

62 and it reminds me of my younger days

[@ericpearson6475]

I agree. I've never had any corrosion issue using Hoppes #9. But then, I clean after every use and lightly oil after cleaning.

[@54l68l65l20l47l61l6D]

I've noticed that as well. That's why my range bag has a bottle of hoppes for barrels and a bottle of CLP for bolts

[@msdosnt]

Cept for the fact that it overall didn’t do that well 😂 The only reason it’s still around is because old farts insist it is the best and it must be doing something right….but isn’t. It’s just folklore keeping it around. I’ll believe testing vs….

[@Briank83]

This is a great idea, loved it! There are many gun cleaners/lubes on the market and among gun owners this type of thing is almost religion. I think we definitely need more episodes. Many old timers swear by quality synthetic motor oils like mobil 1 and other specified products like Mil-Comm MC2500, shooter lube, weapon shield, mpro-7, g-96 and Hornady one-shot to name a few. Excellent work!

[@lonewanderer3603]

Hornady One Shot is a dry lubricant. I think it's silicone based. I don't use it internally, but I will use it on the exterior so I don't get oil on my holster or clothing. You can also use one of those Otis silicone rags and it will dry to the touch.

[@jsmith5443]

@@lonewanderer3603 cool, thanks for the info

[@jmullner76]

Thank you for this. If you want to go deeper into Fudd lore: transmission oil, red and white lithium grease, and motor oil are said to work too.

[@wasabij]

I use 10W30 because that's what my car takes lol

[@leftyeh6495]

Motor oil is very, very good. Although the Fudds tend to be the ones using Hoppes because "that's what you do", while the practical ones realize that an oil designed to clean and resist carbon makes sense. Look up "Ed's red" recipe.

[@midship_nc]

Fudd lore? My ak and saiga both get red bearing grease on the bolt, bolt carrier and rails. Works great

[@geoffreybrandt6453]

This review sold more gun cleaner than any other review and i never saw a gun . Great review as always

[@ProjectFarm]

Thanks!

[@da1stuna]

@@ProjectFarm The only thing you discovered was which gun oil would make the best engine oil. I’ve used them all except one. Their only difference is their smell.

[@t_c5266]

I'd have also loved to see a lubricity test after the freezing. As well as a heating + lubricity test after freezing. Lastly a frozen strength test to see if it will seize up the moving parts of your gun if you were to let it freeze. To gauge how much wear there will be if you just started using your firearm without allowing it to warm up first, if it will lock up in the cold, or if the frozen lubricant immediately melts down and retains its lubrication after being frozen

[@dogle9258]

I really like the idea of seeing if it will freeze bearings together with small amounts of oil

[@80spodcastchannel]

most army's use DRY guns in cold temps for exactly that reason.. machine guns get special low temp lubes. back in WW2 the troops were taught to use a PENCIL for the graphite in the M1 GARAND..

[@bconn525]

I second the idea of a part 2 on this video. Although I wouldn't consider it a CLP, School of the American Rifle mixes Mobil 1 5w-30 with Mobil 1 red high temp grease to a honey consistency and I use it on everything. I love the smooth action it makes, not to mention the amount of lube you get for the money. I'd love to see how it fairs against a lubricity test and corrosion resistance test. Huge fan and keep up the great content

[@ProjectFarm]

Thanks for the suggestion.

[@tbelding]

Take a look at the Ed's Red recipe for cleaner/lube.

[@damonbindock5639]

I also use SOTARacha on my ARs, but I use FP-10 on my pistols. It's like $10-15 for 4oz. Would love to see FP-10 in a part 2.

[@seanmtactical6069]

I'm also in on a Part 2 to this video. There is a lot of snake oil in the gun oil products. I also use School of the American Rifle (SOTAR Sauce) mix and use it on aR's at a professional level on thousands of guns a year. Additionally, I would like to see Weapons Shield as the owner as used this test on to sell his products and an independent test would be enlightening. The other lube I've use for a very long time is Lucas gun lube, which is think is just a re-purposed motorcycle fork oil. These have all worked well in guns in the past.

[@seanmtactical6069]

Also, if you want some of the three above products to test, PM me. I have all of them at the Gunstore I work at and can readily shoot off a test package.

[@johnnygab4376]

Finally KZbin‘s algorithm did something right by bringing me your video. This is an excellent review video and not a paid infomercial like MILFs or the reviewers make. You have a new subscriber in me.

[@ProjectFarm]

Thanks for watching and subscribing!

[@cmcer1995]

This was a great test. I have been holding off on selecting the best CLP and was glad the Break Free CLP did so well but was happy with the Clenzoil's performance and the two winners were in the least expensive category too which was great. Thank you for checking these out and eliminating a lot of the hype.

[@ProjectFarm]

Thanks and you are welcome!

[@henryhenry7170]

One thing that is important and not as easy to test is how well the product works after two+ years sitting on the surface of a firearm. Full synthetics are the best in that regard.

[@BinneReitsma]

Yeah, see how much they evaporate and how hard the residu becomes

[@SaneAsylum]

Breakfree CLP will form a brown shellac that is easily mistaken for rust.

[@FishFind3000]

Also how is flows, if it sits you don’t want it to just fall away.

[@FishFind3000]

@TheCheesePlease I’m gonna guess you don’t own any firearms…

[@VilleLiski]

In most occasions it takes significantly less than that for a gun oil to gum up. I'd say 3-4 months in open container and 1/16" film should be enough to tell if evaporation or some other reaction with air (oxygen?) is enough to gum up the oil.

[@bobheale2521]

I switched to break free clp back in the 90's after experiencing how well it performed in the Canadian army. It is a bit disappointing in preventing rust. I might start doing a final, storage wipe with fluid film. Great video, as always

[@ProjectFarm]

Thanks! Thanks for the feedback.

[@artstudio9673]

I didn't know Canada had an army ? Lol just kidding with my neighbor to the north.

[@richardcarden4161]

Break free makes two types of gun oil. The LP and the COLLECTOR OIL. Both are very good at rust and wear protection.

[@chargerguy74]

I’d love to see Lucas CLP in one of these tests. It beat out everything in my anti corrosion testing, including Hornady one shot, and the Hornady one shot HD extreme. Fluid film failed early.

[@bixby9797]

Never tried it but I keep reading great things about it.

[@CaveWyatt]

And it softens up new carbon nicely. Seems to work pretty well for that and cleaning. I’ve been using it for a while but I also add a little oil for more lube.

[@gregoryburgess2317]

I use the Honrady One Shot and wouldn't mind seeing that as well, along with some of the other brands out there, like Remington's and I believe Winchester has an oil as well. Also, Royal Purple and AMSOIL products included as well.

[@DIYDad1]

I just got a can of the Lucas CLP a couple months ago. So far I’m really liking it. Haven’t tried to test it for corrosion yet. But seems like it lubricates just as well as the breakfree that I’ve used for years.

[@derjager2991]

maybe Amsoil gun oil as well

[@kaelinfisher6813]

Switching from ballistol to frog lube now. This is actually one of the greatest channels on YT

[@ProjectFarm]

Thanks!

[@chevyon37s]

I use Hoppe’s #9 as a cleaner, then apply the break free CLP to my firearms. Works great so far. Even on my duck hunting shotgun (Browning maxus) that has 10 seasons on it and has been dunked under water and sees +/-thousand rounds per year with hunting and target shooting its rust free, has minimal wear and functions great. Never a hiccup even when hunting in freezing rain with the gun that hadn’t been cleaned all of duck season. I left with freezing rain sticking to my jacket, a limit of ducks, and a dirty but still functioning shotgun. And I attribute that to the Breakfree CLP, I have seen many autoloaders gum up and slow down enough to fail to function on cold hunts using other lubricants like Balistol.

[@joshuagibson2520]

Ballistol is water based. I feel it's okay for quick cleaning after using surplus corrosive ammo and on muzzle loaders between shots, but I agree 1000% with what you said. Hoppe's to clean, CLP to lube. It's the only way.

[@Dosbomber]

This is what I've been doing as well, when I come back from the range. Clean really thoroughly with Hoppe's #9, then apply some Breakfree CLP at the points where things rub together. I might switch to Clenzoil after seeing this. What a dramatic difference in wear.

[@endutubecensorship]

Ducks: "I'm glad theres freezing rain today, no one will be out here hunting" You: "clicks safety off"

[@rubiconnn]

I'm not a major hunter or clay shooter, but I've found shotguns are a lot more forgiving when being filthy, probably due to the plastic hulls. I just use some brake cleaner to clean it and then soak everything in motor oil on my 16 gauge sxs because I'm cheap but I've never had issues lol.

[@ProjectFarm]

Thanks for sharing.

[@GeorgeBobeck]

Great video! I wish the video would have included WD-40 and cheap motor oil in the tests, as I've heard plenty of people claim that that either of those is superior to the CLP products.

[@ronnie3044]

I always hear people talk about wd40 for so many things and I have never had wd40 work great at anything outside of cleaning off certain surfaces. Its not technically a real lubricant so I personally would never use it on my guns.

[@Avram42]

I would believe motor oil simply by anecdote with all my automotive tools covered in it but WD-40 doesn't stand a chance, especially in the oven test.

[@davehoward2791]

When I lived in Alaska we would always put a light coat of WD-40 on our rifles and backup guns when hunting in the rain, which was very frequent. It always did an excellent job of preventing rust on our firearms.

[@j.t.cooper2963]

@@ronnie3044 I agree. I use M-Pro 7 LPX on all of my firearms and knives.

[@tonyc223]

Synthetic oil and synthetic grease are the best at metal on metal nothing else comes close. Think of the forces on engine parts , axle gears and bearings.. By mixing the two you can change viscosity as needed for change in climate. Carbon, powder, copper removal is a different deal for that use Hoppe,s 9..

[@larrysutton2001]

I’ve used just about everything on this list at one point or another. Right now I actually have a big bottle of slept 2000. For the sloppy loose tolerances in a non-match handgun it fits my needs just fine. I have a friend who coach the outside of his pistol slide with frog lube so when it comes in contact with his sweat it doesn’t corrode as much. He uses something else for internal parts because living in a cold climate we already knew frog lube wasn’t much good in the winter. You could very very easily do a part two through seven on this subject.

[@ProjectFarm]

Thanks for the suggestion.

[@scottporter4573]

Live in PA and never had a problem with frog lube in the winter..it has to be applied correctly

[@miguelito2361]

@@scottporter4573 They had an old formula that would dry out over time and become ridiculously thick, even solid. You probably have the newer formula.

[@0neTwo3]

I also have great results in the cold with FrogLube, the gun must be completely clean of petroleum based products when the froglube is applied or it will react and form a dirty sludge. Also warming the parts so that the froglube melts and runs freely is very important, wipe as much off as you can after applying, otherwise excess lube will firm up and cause problems.

[@Cautionary_Tale_Harris]

I've got a tube of Lucas Gun Grease that I dab in the slide rails. It stinks when it gets hot.

[@hugba]

I’m not a heavily religious man but I think god he made you, truly exceptional work as always my friend. In a murky world overrun with paid advertising and corporations owning scientist and test studies, you shine bright. We are all lucky to have you mate.

[@ProjectFarm]

Thanks!

[@ramondhuffman6353]

I used Break Free for many years (from my military time) and bought some bottles of Cleanzoil a few years ago. I used it on my AR and it seemed to gum up the bolt pretty bad. When I turned that rifle into my Armorer for servicing, he did not know what I had used but thought I had spilled a Coke into my rifle it was so gummed up! I like it for exterior protection, but don't trust Cleanzoil for those interior action high temps.

[@skipwilliams7288]

Use synthetic transmission fluid or hi-temp synthetic wheel bearing grease for the rails.

[@Scouten819]

i like to use a tiny amount of NLGI #2 heavy duty grease that i apply with a tiny paintbrush on parts that are moving metal against metal its never failed me as its rated for high and low temps and is virtually waterproof. for cleaning i just use either cleaners or if im out and about break-free since its easy enough to get a bottle from work lol

[@xxjusxstarxx]

Better not have a dirty starfish, if I get dirty stuff on my finger after putting it in your starfish you didn't do a good job lol

[@Sickofsociety1]

You had an AR in the military?

[@RyanMPLS]

@@Sickofsociety1 I Was trying to figure out the context. Seems to be he used Break Free in military, once out used Clenziol on an AR. The confusing part is "armorer". If armorer = civilian gunsmith it makes more sense, otherwise ???

[@Kevin_747]

I've been using Hoppes for years, might give Clenzoil a try. The Hoppes works great for soaking the fuel injection nozzles for my aircraft engine. Thanks Mr Farm, great test.

[@freedomgunsandliberty]

Have you tried seafoam? Cleans carbs to brand new in 24 hours

[@Alexander_l322]

@@freedomgunsandliberty so does oven cleaner but that can do it in a lot less time! That doesn’t mean it’s good.

[@LTVoyager]

Good luck. I have tried several products over the years and always come back to Hoppe’s #9 using separate products. None of the one size fits all works as well as individual purpose built products.

[@freedomgunsandliberty]

@@Alexander_l322 seafoams safe on plastic and rubber. Oven cleaner is not

[@sharky5570]

Been using clenzoil for many years and my dad used it many years before me. Good veteran owned company

[@ZakDub]

Lucas Oil Extreme Duty CLP is highly recommended in many gun stores. I’d love to see a part 2 showdown with a few other products. Someone mentioned WD-40. That would be neat to see as well. Thanks again for all your hard work.

[@emmanuelalva6597]

Smythbusters did a video about how wd40 shouldn’t be used

[@ProjectFarm]

You are welcome! Thanks for the suggestion.

[@UKSportsFan]

Good idea, Zachary. I'd like to see Lucas and M-7 in a "part 2" as well, since those are two that I have that are both highly rated.

[@charleshetrick3152]

@@ProjectFarm if there’s to be a “Round two” I’d recommend a recipe called *Ed’s* *Red*

[@larryduttry9400]

I agree with the Lucas extreme. I was hoping it was part of this test.. hopefully there’s a part two.

[@carrioncrow8191]

I don’t know why, but the Clenzoil and the FrogLube stuck out the most to me. You really are the GOAT for the consumer. I just wish I could think of more product categories for you to test

[@ProjectFarm]

Thanks!

[@randyporter3491]

All I can say is, if Project Farm had a magazine and a searchable database, it would put the well known "CR" OUT OF BUSINESS ! - Great video as always and like others, I would love to see this test expanded on.

[@brettlathrope3612]

I no longer subscribe to CR ... they seem more focused on their WOKE and Climate positions than product reviews.

[@randyporter3491]

@@brettlathrope3612 Well said. I dropped it too.

[@rickyanke9407]

So you think PF is going to spend the time and money to do long term testing on microwaves, vacuum cleaners, washers and dryers, cars, lawnmowers, ovens, kitchen mixers, blenders, mattresses, electric toothbrushes..ect? Pf does a really great job on small batches of relatively small testing. Nowhere near the time, money, and effort of CR. If you don't like the CR results, but like them here, that's because of your emotions, not because of the test results are wrong. Sounds like you are injured because your favorite car or truck brand isn't the top rated. Guess what, it's probably because it's true. Both PF and CR use data which is logical not emotional. Get over your emotions.

[@brettlathrope3612]

@@rickyanke9407 You are missing the point ... I can get the same information elsewhere on the net (like here) that I can get from Consumer Reports, and I refuse to support an organization that takes my subscription dollars and spends it on causes I not only don't support, but in some cases actually oppose. So I am doing what I can do ... voting with my wallet.

[@rickyanke9407]

You are missing the point. PF can't and won't be able to test all of the products that CR does, and you won't find test results on the internet either. Just take lawnmowers for example. Where on the internet are you going to find side-by-side testing on 10 zero turns,10 tractors, 5 small riders, and 18 push and self propelled, 14 gas and 12 battery string trimmers? All without advertising dollars? You won't. That's the point. PF does a great job on small batches lower priced consumer products. It's awesome. And it's a copy of what CR has been doing for years. Plus you have no idea what PF does with the money they get from advertising. Also, what does KZbin do with the money they earn every time you click on a video? If you buy a top product from a PF review, what's that company going to do with the profit you gave them? Do all of these places spend it in ways that you agree with? Very unlikely. So while you "think" you are voting with your wallet, you aren't. My gut tells me that you don't really understand that CR can't even give political donations, which I'm pretty sure you were referring to.

[@leviturman1159]

I've used balistol forever. Your great tests have convinced me there are better choices. I'll probably continue to use balistol on tools with wood/rubber/leather parts. Being skin safe and non toxic I don't worry about small residual amounts on knife blades or tool handles. I use olive oil on kitchen cutlery.

[@jhamelin119]

Fire arms barrels do not require lubrication as a crank bearing does. Ballistol is great for cleaning bolts and moving parts.

[@bixby9797]

Ballistol is the Leatherman of oils. Does nothing perfect but is useful in about any scenario. If someone twisted my arm and made me only have one thing like that I would take Ballistol any day.

[@TheLostKoz]

I love the fact that Ballistol doesn’t degrade rubber and is non-toxic. I always keep some around for simple cleaning and lubrication of guns, knives and tools.

[@aussieexpat]

Vegeteable oils are a good choice. However, you need a good cleaning schedule as since it's biodegradable it will eventually foul and turn to gunk. I personally do like to use vegetable oils on my competition guns which see actions (and cleaning) ever month.

[@kenrup]

Balistol is a German product developed just before WW I. It's a favorite of the black powder shooters as it is water-soluble. It's fabulous for cleaning a muzzle loader's barrel. But I tend to chase things with Breakfree.

[@jnicksnewstart]

I felt bad to see Hoppe's not do better. I always felt that Hoppe's No.9 Nitro powder solvent was the ultimate in men's aftershave and cologne.

[@ProjectFarm]

Thanks for the feedback.

[@CCW1911]

Unfortunately, and especially on the internet, it's common to believe Hoppes No 9 is great for everything not realizing it's a bore cleaner not a CLP but even the Hoppes CLP wasn't great in this test.

[@jnicksnewstart]

@@CCW1911 I'm fully aware and realize what Hoppe's No 9 is for. I also know the difference between it, and a "Clean Lubricate and Protect" product. My comment pertained to my expectations of a Hoppe's product to perform better. I've been using their brand, along with others for over 50 years.

[@RWMAirgunsmithing]

If you look at the overall scores I find it really didn't do that bad. Hoppe's most likely is a brand that wants to meet all requirements, even the milspec -40° (very respectable considering 3/4 of the brands dont even meet it). Cleaning can be done more thoroughly and I would bet the army doesn't use clenzoil xD

[@RWMAirgunsmithing]

@@jnicksnewstart Also, just curious, have you ever had any issues? After 50+ years do you think now with this knowledge you would change anything? Im Canadian and only had my license for 2 years, i have zero experience compared to you xD hehe

[@J.Wick.]

Hmm.. Time to order some Clenzoil! Love to see a series on Gun Oils. Lucas gun oil, shooter lube, hoppes etc. Thanks Todd. Great work as always!

[@ProjectFarm]

Thanks! Thanks for the suggestion.

[@earhornjones]

Great video! I've used Ballistol for years, but after watching this video, I ordered some Clenzoil, and I just used it to clean 6 and lube 6 guns. It seems to be a much better product. Thanks for dropping some science on me!

[@ProjectFarm]

You are welcome! Thanks for sharing.

[@fog8969]

I've been using Ballistol for years based on recommendation of well-known KZbinr. Will order some Clenzoil and maybe one of the others soon.

[@gamingdreams2142]

Lol me too

[@dontquestionmyname5490]

gotta get rid of ballistol after this. The smell is terrible too

[@earhornjones]

@@dontquestionmyname5490 Oh my god, Ballistol smells so bad! I just cleaned a dozen gun using Clenzoil, and not only are they clean, but I'm not gasping for breath!

[@CaptHollister]

I watched this with great interest... and I don't even own a gun. That's how good your videos are. Perhaps one comment regarding the dust retention test: it seems to me that the position of the product relative to the truck's wheels had an impact on the amount of dust to which it was exposed, so not every sample was subjected to the same dust cloud.

[@alghuraba]

I also have no idea what CLP is and enjoyed the video

[@brandon152lee]

@@alghuraba it’s a Cleaner, Lubricant and Preventative in case you were curious.

[@alghuraba]

@@brandon152lee oh cool. Thanks!

[@lifegoeson05]

Sounds like you need to purchase a firearm. I promise, it’ll be the best investment of your life. My wife and I carry a S&W Shield Plus, and I’ll switch mine out with a P365 every now and again.

[@shutthegate8232]

Testing was way more involved than I guessed it would be. Outstanding effort with it all, running through all the various tests & comparisons. Appreciate it.

[@ProjectFarm]

Thanks so much!

[@gaigeeeeeee]

I just have to say thank you, sir. This information is invaluable to the firearms community and many others. I would absolutely LOVE to see a part 2 with other popular CLP's like RemOil, Lucas Oil Extreme Duty, DRNCH, Mossy Oak CLP, Steel Shield, etc. Maybe even an engine oil of your choosing for the sake of comparison.

[@ProjectFarm]

You are welcome! Thanks for the suggestion.

[@Lees920]

What an interesting test. I'm so glad you did this because I've been using Clenzoil on my guns, outboards, and rods and reels for years. I am among their pro-staff for field use since I run fishing charters. I can certainly vouch for the product as it maintains my reels, guns, and other items in some of the most corrosive atmospheres. Thanks for a great test!

[@ProjectFarm]

Thanks and you are welcome!

[@ETuss713]

Im curious as to the difference between the marin and the range. I use both, but I would like to know if the marine and tackle are more rust preventing. I dont need it to lube as much as to clean salt and prevent rust.

[@denwilson4445]

Thanks for the comparisons. I own 4 of the brands listed. Now I know where they stand in comparison. Also, I concur with many others on wanting to see a part two with additional brand testing. Your research has helped me in making better informed purchases.

[@j.bridges2921]

Thank you for doing this video. There is so much snake oil in the industry these days, it's great to see product claims being put to the test. You're the best, man!

[@ProjectFarm]

Thanks and you are welcome!

[@charlesgrubbs2101]

Is Snake Oil as good as Frog Lube?😆

[@DavidLLambertmobile]

I agree. About every 10min, some new high tech whiz bang oil or cleaner comes along. Most are just simple formula products with bro vet or fancy labels. 😒 Use a well made CLP or oil.

[@Fireworxs2012]

*I'm currently nearly 62 years old, I've been cleaning firearms since my age was a single digit. Dad was a Recon Marine with medals for rifle & pistol shooting, competed in PALMA, taught me to hunt & shoot before I could ride a bicycle. (guess who got to clean the guns after a day's hunting and/or shooting?) I probably spend 50 hours a year at the Gun Range. Dad has been gone for over a decade, but the lessons he taught me in firearm maintenance are still with Me, my Sons and now, my Grand Daughters...I just got done cleaning this year's Deer Hunting firearms, (.308, 2x .243's, and a couple of 22LR pistols) all of which were very dirty. I live in West Nebraska and it's basically a dust bowl out here...Saw this on my feed and thought it would be interesting to watch. As per Norm, PF never fails to provide quality content....That said* *Hoppe's #9 is primarily a solvent. It's intended use is for removing gun powder residue, copper & lead from gun barrels. So I would have to disagree with classifying it as a CLP. It's never been much of a lubricant and it's not supposed to be. Ballistol is basically the same product with the same intended uses. If you want lubrication. you want GUN OIL or you want a graphite based product, but be forewarned, graphite products can be messy & require mucho maintenance to prevent build up....CLP's are a bit of a misnomer and very much misunderstood among today's younger shooting population. I blame the Marketing Divisions of companies competing for shooter dollars...For the record, the last thing you want in a gun barrel is oil or any other product that might either impede the bullets path, affect the rifling's ability to engage the bullet, or raise chamber pressure. A dry clean barrel is always the goal. Bolts should be clean of any build up and either left dry or LIGHTLY lubricated....Some Hoppe's #9, a can of quality petro-based oil, like 3 in 1 or Outers is all anyone will ever need*

[@ProjectFarm]

Thanks for the feedback.

[@dougsnavely847]

58 here and we lived similar lives.. Totally agree with your sentiments...some of the products did surprise me.

[@libertyprime9307]

Lies. *No true 62 year old knows how to bold KZbin comment text.*

[@Fireworxs2012]

@@libertyprime9307*I'll take that as a compliment, Junior* 👍🖕

[@Osprey1994]

You do know that Hoppes makes multiple products under the #9 banner? They make a lubricant, a CLP, and a bore cleaner.

[@johnnyhonda4404]

G-96 gets my vote. When considering a test like this it would have been nice to see a poll put up to see which CLP's people would like to see tested. I could see where a poll would not be needed for many of your other tests, but it would have been great to see one for this test. Keep up the great work!

[@codefeenix]

G-96 gets my vote too

[@leadbulletjunkie2235]

G-96 is my favorite too and it doesn't stink like hoppe's nitro solvent or ballistall does when you're cleaning. Depending on the firearm I use G-96 or high temp wheel bearing grease for lube

[@mmgreen31]

I agree. The G-96 bio-CLP is my go-to product.

[@davemilster]

G96 has been my go to fir 40 plus years

[@sw0]

I use only G-96 on all my stuff.

[@TheGuitarman1968]

Thanks for the CLP tests, Todd. Back in the day Hoppe's used to be the go-to CLP for law enforcement, military, gun smiths and just firearms owners in general. It has a very distinctive odor that I think has somehow permanently permeated my nostrils....lol. My dad was a police officer back in the 70's and 80's, when I was growing up. I can still remember "equipment cleaning day" in the garage, when the smell of Hoppe's and Kiwi black shoe polish would permeate the air. Oh, the good ol' days. I still use Hoppe's to this day, and it still works and smells great. However, it looks like there may be some better CLP products on the market these days.👍👍

[@DracoOmnia]

Hoppes is best as a cleaner, I wouldn't use it as a lubricant or preservation agent.

[@wchops7578]

The smell of Hoppe’s gets my heart beating.

[@stapleboss]

I've been using Hoppes 30+ years and LOVE the smell. Might have to start using it as a cologne.

[@mikepurvey5205]

Sadly some years back Hoppes changed their formula and the newer stuff is distinctly less effective.

[@bixby9797]

The smell of Hoppes 9 always takes me back to deer camp when I was a kid and it was standard to take the first week off of school. Teachers would assign work ahead of time knowing few boys would be showing up. I even bought a Hoppes 9 air freshener for my car.

[@projectsdontstop8441]

In my experience with break free clp, it's not all that great as a lasting lubricant on firearms but it works great for getting rust off and creeping into spaces. Used it by the gallons to keep guns from rusting and overheating.

[@ProjectFarm]

Thanks for sharing.

[@frankbier1690]

I agree BF CLP to clean followed up with Clenzoil to protect, no one perfect product

[@mickcharlesbeaver4331]

Thank you for making this video! I didn’t even consider the idea that different products would be better for different climates.

[@ProjectFarm]

You are welcome!

[@robertgalusic5873]

There’s so many more to test! I’ve been waiting for this. Weapon shield, shooter lube, breakthrough clean, slip2000 has different weight oils also! Great testing and would love to see more the best of the best gun cleaning products is something I’ve been searching for, for years

[@ProjectFarm]

Thanks! Thanks for the suggestion.

[@bradcampbell7253]

I think gun oils are bleh in quality and super high priced. So I generally use engine oil.

[@williameholt6364]

Waiting on shooters lube to be one trsted!

[@chrisdavis9318]

Also test Gun Butter.

[@jamses23]

@@bradcampbell7253 Chad at SOTAR has a great video on his channel of some home brew lube that works great for gas guns.

[@TommyboyGTP]

Give Slip 2000 EWL 30 a test. It's thicker than the standard EWL and I believe it will have much better wear characteristics. I've been using Slip 2000 products for years and with normal use and care all of my firearms have ran fantastic. Thanks for the test.

[@Joe_Friday]

I add tungsten disulfide to my EWL 30. It's a cheap additive that increases performance.

[@BoringGameReviews]

This one was all over the place. Typically you will find one superior product but they're all better at specific tasks. Great video 👍

[@laptopdragon]

agree... at this point we need to make a mix of them all into one tube.

[@BoringGameReviews]

@@laptopdragon can we patent mixing other products 🤣

[@volvo09]

That's why I like these tests and analyzing the results to what meets your needs. It always amazes me that people will still say "you didn't say what the best one was"... Umm, really? isn't it obvious when you think about your requirements and or use case?

[@brycebraxmeyer5539]

I have been running synthetic motor oil in all my firearms for years, and it has worked great. I'd like to see a comparison with engine oil.

[@tonyc223]

Yep,nothing comes close to synthetic motor oils and synthetic grease...

[@bradhaines3142]

motor oil is specifically designed to tolerate a lot of heat for a long time. thats actually a great application for it. i guess id use a higher viscosity so it sticks better.

[@bryceforsyth8521]

Now that's a concept!

[@tonyc223]

@@bradhaines3142 Mix synthetic oil,and synthetic grease , you can vary the mixture depending out outside climate and where on the firearm you apply it. Using this method since 1980,s on AR,s, M-1, M1-A.

[@jamses23]

@@bradhaines3142 SOTAR mix is definitely the best

[@sapelesteve]

Nice to see the lubricity tester back PF! I remember you testing all of the various motor oils. It always amazes me at how different these products perform when tested. Keep up the great work and hope that all is well! 👍👍😉😉

[@ProjectFarm]

Thank you!!

[@ez56789]

Dudes a saint for posting a full chart at the end 🙏 thank you Sir for testing and putting it down bluntly/efficiently on paper

[@ProjectFarm]

You are welcome!

[@adaml6458]

If you do another one of these, I would love to see how Lucas Extreme Duty CLP holds up. It seems to perform miracles for many folks I know.

[@ProjectFarm]

Thanks for the suggestion.

[@TheTAEclub]

​@@ProjectFarm and shooters choice clp!

[@saintbartholomew7434]

I've been waiting for this video for a while. Very interesting and in some cases unexpected results. I've mostly been a Break-Free CLP guy, but I may need to look into other options to prevent corrosion on some of my older and less-often-used firearms. Thank you for a great video, as always.

[@DamplyDoo]

So I'm a noob, but i want to learn how to prevent rust on antique firearms. If they are being stored in a humidity controlled and temp controlled environment, do i need to do much?

[@DavidWilliams-ig5ec]

Try CLP Collector, designed for longer-term storage, not lubrication.

[@blueheeler4807]

same here; always wanting to learn

[@Spookshow1000]

@@DavidWilliams-ig5ec I second. This! It's amazing. I use it on all my firearms except my edc. My safe dehumidifier failed and I didn't notice for 3 months. My firearms are kept in my garage and in NC the humidity can be bad. Not one spot of rust. I suggest breaking them down all the way and spraying each piece individually. Then every few months spray them down. I'm a break free believer. Been using it for 30 years. Ballistol is a great product for wood. use it on all my wood stocks. Even works great on furniture. It was used by the Germans from ww1-ww2. Ballistol in my opinion should be used for what it was designed for, single action bolt rifles with all wood furniture. Good luck and be safe!

[@ProjectFarm]

You are welcome! Thanks for sharing.

[@brendanloconnell]

I recall that FrogLube used to recommend degreasing and then heating parts before applying for the first time so that the lubricant would fill in the surface better.

[@wraithwyvern528]

Wouldn't be much of a CLP if it needed a degreaser first.

[@wraithwyvern528]

@@brad4010 Says CLP on the jar, bud

[@davidhawkins847]

I don't recall needing to degrease before applying. It will eat up, or lift your petroleum based products which may have caused issues if you have a lot I guess. The biggest issue is using too much Frog Lube, leaving it on like a grease. I don't know about the newer formula but the original would solidify a bit, just like how it is in the canister making the first few rounds fired a bit unreliable until it warmed up and liquefied. That works ok for cleaning, but way too much for function. I saw someone use a shaving brush to apply their last coat of oil and started doing that for adding that last swipe for lubrication so I don't have enough to gunk everything up.

[@davidpotts8316]

YEah you're supposed to heat the metal, apply the paste, the paste melts, you rub it around, let it cool fro 1+ hours, then wipe off excess. Thats how you're supposed to use frog lube, it's not supposed to be globbed on and left chunky or wet. It's basically a seasoning for the metal.

[@Mrgunsngear]

very interesting results; thanks

[@jamses23]

This is the crossover we need!

[@josh48315]

Fair enough

[@ImaYam]

@@jamses23 one is a shill with no value add and the other is a research based testing channel with over abundance of value, let’s not mix the two lol

[@arthurmead5341]

@@josh48315 "indeed"

[@silverstar1865]

Thanks! Great CLP review. Thanks for helping me get past the hype!

[@ProjectFarm]

You are welcome! Thanks for supporting the channel! I really appreciate it!

[@PBVader]

Your consolidated chart at the end is appreciated, and gives a big picture performance guide. Been using Break Free for 15+ years, and always had those "other" small bottles hanging out in my kit. Now will relegate them to the penetrating fluid can. Thanks.

[@ProjectFarm]

You are welcome! Glad to hear!

[@ChuckThree]

I’ve had flash rusting issues with Break Free on parkerized shotguns here in the southeast. But it looks perfect for cold weather.

[@PBVader]

Oh, we have that issue up here too. It's amazing how much moisture condenses on cold metal. I use Ed's Red no acetone on the in/out wipedown. Clp /Lucas for final clean / lube. Safe heaters or desiccant is a must. I have one shotgun of foreign steel that still flashes over. It's a problem.

[@fckurvtc]

Wow. I’ve used slip2000 for years and even after trying others it’s been my go-to. Interesting to see these results!! I’lol be trying clenzoil next. Thank you for all of your efforts!

[@ProjectFarm]

You are welcome! Thanks for the feedback.

[@johnkc413]

I used the Break Free CLP in the US Army, and now i am a civilian I still use it on my personal firearms. I watch your videos all the time. The information and products you cover is amazing. Thank You so much.

[@ProjectFarm]

Thanks and you are welcome!

[@BMUU666]

This episode was fantastic (as always)! It was refreshing and great to see something a little different than the normal content. A video recommendation. It would be great to see a variation of this test, with only spray can/aerosol CLP. It would be interesting to see if they do a better job than the more traditional liquid bottled products. Especially since they could possibly have a different formulation. Oh and if you could test the Lucas CLP in that round, that would be great!

[@ProjectFarm]

Thank you for the positive feedback and for the video idea!

[@grindersandgears3445]

I suspect a spray can would be less effective, if paint and bedlining coatings and such are anything to go by. I'm looking forward to the results here as I've tried a few and haven't quite settled on one I like yet.

[@elsullo2]

@@grindersandgears3445 I have found several wonderful sprays that come out of the tube as an active foam that shrinks down quickly into a penetrating liquid as the spirit carrier evaporates. Then within minutes the liquid has turned into a thin layer of non-sticky grease. There are motorcycle chain lubes like this too, which are what I use on guns...........................elsullo

[@andysnow7458]

Would have loved to see these compared to Penzoil Platinum or Amsoil 5w-30 as a control, which I bet would have outperformed them all...

[@Moelester692]

Literally stopped using all gun specific lines a while ago , any heavy weight oil synthetic or not works so much better and a liter will last forever , use with lithium grease for a heavy range day and it can’t be beat. Clean it off with break clean and alcohol , gun lubes are a scam haha

[@mikeschlup5279]

Had a buddy do his air rifle with 0w20 Redline...wire brushed out the lead and a fresh patch with Redline...his chronograph showed he picked up 20 feet per second.

[@dakine808shooter]

Yea easily takes the heat and lubes at the same time, my kind of women w0ot!!

[@SkylineUSA09]

Great review! For me, I haven't gotten good performance from CLPs. I prefer separate cleaners and lube. Would love to see a future review of M-Pro 7 Cleaner and Weapon Shield Lubricant!

[@biffteutsch3402]

Have used M-Pro 7 for a few years and I have had outstanding results!!!!👍

[@bcjammer]

of COURSE PF has tested this! Was doing a google search for this and my favorite youtube channel and absolute best tester hands down popped up...I should have known! THANKS ONCE AGAIN PF!

[@ProjectFarm]

You are welcome!

[@terranempire725]

Great video (yet again). I was surprised at how poorly Hoppe's performed considering its a major player in this arena. This definitely changed my next purchase for CLP. Keep up the GREAT WORK!

[@ProjectFarm]

Thanks, will do! Thanks for the feedback.

[@DIYDad1]

Would love to see the Lucas oil CLP added to a future test I’ve been seeing a lot of people use that stuff lately. I usually use breakfree CLP myself if I’m not using just regular motor oil. Great video as always!

[@austinhowze6280]

I second this

[@villaofpapyri9613]

Lucas is a big one since you always see it in the quick grab section at stores here. Also ALG go juice and their 000 lube. I would also love to see the School of American rifle recipe. It is Lucas red n tacky with some mobile 1 0-30 added till it's the consistency of honey.

[@additudeobx]

I have been using it....

[@beaf2405]

Love your content man, always quality tests and you go out of your way to do so.

[@ProjectFarm]

Thank you!

[@ComputerProMedia]

Great video! Please consider an updated CLP video that includes Lucas Extreme Duty CLP and Rand CLP. Lucas has been touted as being better than the 'popular go to's', and Rand is supposedly non-toxic (possibly vegetable oil based) and supposedly works as well or better than a lot of the others. Lucas has been in the oil game for a long time. A lot of folks have been raving about their CLP.

[@ProjectFarm]

Thanks! Thanks for the suggestion.

[@MichaelGMoney]

Would love to see you test Lucas Oil as well. It's what I use for my own guns, and some of my other moving metal parts around the house. Plus it smells fantastic.

[@spec8473]

The big thing with Ballistol and mostly why it's still popular, is that it was primarily used for cleaning corrosive powders without having to worry about too much extra cleanup. When it was originally made, corrosive powder/primers where pretty much the only thing there was.

[@ProjectFarm]

Thanks for the feedback.

[@ColonizerChan]

Yeah I mostly use it on guns that are manual action and use wood stocks. Most other shit I've ran clp without issues

[@TotallyAchrestos]

Great comparison, as usual. I'm curious how weapon-specific CLPs would fare against automotive lubricants such as Mobil 1 and/or gear oils (say, 75W-80), as well as more all-purpose ones, other than Fluid Film. I'd love to see that in the future if you think there's a point to it.

[@ProjectFarm]

Thanks! Thanks for the suggestion.

[@JoeandAngie]

I know a Vietnam vet who only uses Mobile 1

[@jjwiii1432]

For longer term storage I use Mobil 1 too. You can use more, so it's much more cost effective.

[@blackhawk7r221]

Since most CLP’s are half rust penetrant, I only use it for cleaning carbon. For lube, just use the slickest oil that you can rub between your fingers, which is seldom a motor oil. Hoppe’s 9 is a very slick one.

[@stevenkuhn7942]

@@ProjectFarm would love to see Weapon Shield put to the test thanks for all you do

[@wadewells808]

Great test, as always. I use CRC 6-56 for rust protection and Super Lube for firearms oil. I restore a lot of old tools for a hobby and many of them are not plated (chrome or nickel). CRC 6-56 provides amazing long-term rust protection on my restored tools. Hoping you can add both to your next tests.

[@ProjectFarm]

Thanks for the suggestion.

[@saschotter]

I've been waiting for this particular test and I am glad to see how thorough it is. This confirms a suspicion I have that these companies have been resting on their laurels for too long and it looks like all the major brands represented here need to do a better job with their products. Ballistol, I am looking at you. Big thanks to Project Farm for the testing and a solid commitment to stirring the pot on consumer products.

[@setheverhart]

If you do one of these in the future it would be helpful to know at what temp the lubes stop working. For instance, if it never gets colder than -10 where I live, perhaps some of the lubes that failed at -40 would still be viable options for a vehicle gun. Thanks for all your great videos!

[@ProjectFarm]

You are welcome! Thanks for the suggestion.

[@brianfolding40]

Not sure under what circumstances you'd store your gun in a vehicle, but hopefully it's out of sight and in a substantial lock box.

[@WhyDoIevenBotherCommenting]

@@ProjectFarm I'll second this. Knowing your CLP can keep things lubricated at 20 vs 0 vs -20F is a big boon. That being said, the Clenzoil still flowed a bit at -40 so here's hoping..

[@WhyDoIevenBotherCommenting]

@@ProjectFarm Oh, btw. Next time you do any thermal testing, put a big thermal mass in the chamber (like a rock, cinderblock, something with high heat capacity that isn't metal) and let it heat/cool to the desired temp before putting in the samples. That thermal mass will really help keep your transients in check.

[@jayandrusiak]

@@brianfolding40 Thanks Karen, I will store my firearm how I please and is most readily available, mind ur business and u won’t have a problem

[@chincemagnet]

I use the Hoppes, unfortunate it didn’t provide more protection from wear, but good to see it flows in cold weather since I typically hunt in frigid temperatures. My family has been using it as long as I’ve been alive and we’ve never had any issues with any of our guns.

[@ProjectFarm]

Thanks for the feedback.

[@AK-ky3ou]

I’ve been impressed with the clenzoil with this and others tests. I went ahead and bought some Mossy Oak clp which is clenzoil repackaged. It’s really great stuff and cleans carbon better than other non dedicated clp cleaners I’ve used in the past.

[@ProjectFarm]

Thanks for sharing!

[@someguy7993]

I have been a gun show dealer for over forty years, and I have tried many different lubes and cleaners in that time. The two that impressed me the most, and that I personally use the most, are Gibbs synthetic oil and Clenzoil. I use Clenzoil on my samurai swords, because it penetrates, displaces rust, and protects the blades from any rust or corrosion. Since I'm having a tough time finding Gibbs right now, Clenzoil is my go-to oil for anything valuable or important.

[@ProjectFarm]

Thanks for the feedback.

[@CandyGramForMongo_]

I’m always impressed with your testing methods. Nicely done.

[@terrysoule8441]

One of the tests, dirt attraction, was interesting. When I was in Iraq/Afghanistan we used CLP. The old advise was "don't lubricate much because it attracted dirt and will gum up the action" the real trick was to lube the hell out of the thing and let the CLP wash out the dirt.

[@Garthbrooks4756]

I ran my bitch dry

[@piworower]

im a bike courier and i say the same thing about chain lube.

[@ProjectFarm]

Great feedback! Thank you

[@sladeoriginal]

Depends on the environment. No matter what, if you're in adverse elements, (sand, heat, salt) lube and clean daily.

[@garyfontenot2786]

Our supply provided us with Otis CLP with an NSN in Iraq.

[@tolesy00]

Thank you for all of your work! I’d love to see splitting axes or mauls as well as folding camp saws tested.

[@ProjectFarm]

You are welcome! Thanks for the suggestion.

[@danialphaomega]

SILKY saws are the best!

[@Aeronaughtica]

Thank you for this video and for all the effort that went into testing these products. We spend hard earned money on our beloved firearms, and need to know what products protect them best.

[@Ramireze8080]

You sir, produce some of the greatest real world scientific testing. I absolutely love your approach and results are surprising to me. I'll be changing from Balistol for sure. Have you tested "Lucas Extreme Duty gun oil"? Im really interested in another video with this CLP. I've seen it at the local AutoZone counter.

[@ProjectFarm]

Not yet. Thanks for the suggestion.

[@mghegotagun]

@@ProjectFarm I see the slip 2000 survived the freeze test, but isn't there some sort of risk of it being too thick for the action of a firearm as a result?

[@trevorspencer5872]

@@ProjectFarmyes do lucas please

[@whodoneit1224]

I've been using Marvel air tool oil for years. Still doing the job. Might not be a clp but works good. Definitely no rust issues.

[@ProjectFarm]

Thank you for the feedback!

[@countrycoastie9574]

I love your videos, I have a CLP called weapon shield. The creator has YT videos of tests with a similar bearing wear machine but of course it's hard for him to not be biased. It would be amazing to see a part 2 with this included.

[@SuperDaveTX1]

I agree. I used this too and remembered the creators video as well.

[@ProjectFarm]

Thanks! Thanks for the video idea.

[@redditredditredditredditreddit]

Love the smell of weapon shield

[@EugeneSan]

I agree, Weapon Shield should be included in tests like this. From my modest experience, nothing comes even close to Weapon Shield both as lubricant and cleaner. Yes, there are better lubricants and cleaners individually but not combined. Since I found it, Weapon Shield is the only thing I use for weapons and mechanical devices (except Rem Oil which I use to do light cleanups and long-term storage mainly since I already have it and it's cheap ;-)).

[@nathanhudelson4935]

I’d love to see weapon shield in here as well. I just bought some 2 weeks ago because of the guys tests he does with a lubricity tester.

[@pars5027]

Great test and video. I've been using Breakfree CLP since 1980. Clenzoil did great. I will add that to my cleaning kits!

[@ProjectFarm]

Thanks! Thanks for the feedback.

[@ssnydess6787]

Really appreciate this info as an active hobby shooter and reloader. I would propose a follow on test for the best bore cleaner as there are several brands that exclusively remove copper, such as Sweets 7.62, which is generally the most bothersome fouling component. Thanks again!

[@ProjectFarm]

Thanks! Thanks for the video idea.