[Prop House] Making Ghost's Mask (COD:MW 2019)

[@G-741-S]

Studio 52: Price, there's something wrong in verdansk.. they targeting they're own

[@JOHLumLums]

God damn! Just what I needed, planning to cosplay Ghost in a local convention in honor of Ghost and Modern Warfare 2. Thank you so much for this Lt.

[@EL2VI]

Also that turned out awesome. I've been wanting to get a mask like that or make one. Moreso that "Ghost of Verdansk" style, but seeing your process sure helps give a guy some idea where to start. So cool!

[@AustinGigstead]

Still don't know why you have more subs, these types of videos are awesome

[@Studio_52]

Thank you

[@ajp2811]

@@Studio_52 what grade sand paper did you use? Is 220 good?

[@Studio_52]

@@ajp2811 I start around 120 and worked up to 600. Don’t do too much at lower grits to avoid removing too much material.

[@ajp2811]

@@Studio_52 thanks much! Looks like I'm going back outside.

[@Studio_52]

@@ajp2811 good luck!

[@StellaMyCatMEOW]

Best tutorial on the entire internet!

[@Studio_52]

Thank you 😄

[@teronglasgow7014]

I love way you make ghosts mask I am going to buy one or maybe 4

[@yusufhanif6790]

thats skeleton part is better when you make that kind of shadow or something and that make its look real Good Job man👍🔥

[@vhumpy364]

The actual first step for me is to buy a 3d printer and all of the supplies

[@ssm1105]

Nice job bro U r a real artist

[@brudik6414]

Hello, I have a problem: the mask turned out to be tight for my temples. What should I do? I think it can be heated with a hair dryer and stretched a little, but I don't know how abs+ plastic will react

[@Studio_52]

Heating it is a good option but you need to be careful as you don’t want to warp the piece, another option in sanding the inside (this may take a very long time however), the final option would be to print a new piece and adjust the size before printing either in your slicer or another 3D model program.

[@EL2VI]

Lmao the running to the store part was golden.

[@StellaMyCatMEOW]

Can you make a mask tutorial for mw2 2022????

[@ojplayz340]

What grit sand do you use after priming and do you wet or dry sand it? i didn't use a filler just a primer

[@Studio_52]

Usually after priming i use 400 and move to 800, and usually start with wet sanding and switch to dry at higher grits

[@bendoesboxing2685]

great vid bro keep it up!!! Bravo Six Going Dark!!!

[@kyle.f6255]

What 3d printer did you use?

[@Studio_52]

Creality CR-10 Pro v2

[@Ufc.will.]

Gonna order a ghost mask from etsy but I did not rwalease how much stuff you needed to do in order to wear it

[@HaydenW0511]

Did you just use regular sewing thread?

[@Studio_52]

Yes

[@NamesOx]

I know this video is 1 years old but the recommended grits for the sandpaper?

[@Studio_52]

I usually do an initial pass with 120-150, then work my way up 800 smoothing it out, that usually works pretty well. Depending on the finish you might not need to go as high as 800 or if you want it polish smooth you will need to go higher perhaps up to 1500 or more. Sometimes you just gotta feel it out as you go, hope that helps.

[@Samuel53109]

What kind of filament did you use

[@Studio_52]

PLA, specifically Overture brand.

[@Samuel53109]

@@Studio_52 do you think ABS would still look detailed? Mine I have not painted yet but it needs to be stronger for my use.

[@Studio_52]

@@Samuel53109 yeah ABS should print about the same as PLA, it really depends on your speed and temp for quality, also layer hieght

[@Samuel53109]

@@Studio_52 I don't have a printer so I just paid an online friend to do it💀

[@konrados966]

how long did it take to print

[@austin_bradley_1622]

Everyone in 2022 tryna make his mask bc it’s literally impossible to find the skull part

[@Vortexx_20]

I give it 10 foaps/10

[@DrippDroppz]

Haha this is awesome nice video! At the end I started laughing 😄 that was cool

[@PhamousBoi]

This was awesome

[@VICIOUSDUCK]

does the 3d model come already 3d printed when it arrives?

[@Studio_52]

The 3D model is a digital file, I then take it run it through a slicer program which spits out GCode, I then feed that code into my 3D printer and the machine does the rest, so no.

[@nathanshipley7960]

@@Studio_52 what 3D printer do you use? I love the idea of getting one but have no clue where to start

[@Studio_52]

@@nathanshipley7960 I use a creality CR-10 Pro V2, which a larger size printer, it is a bit more pricey then some but comes with a lot of nice features like auto bed leveling, creality offers several models of CR-10s at varying price points, if you want a slightly smaller size printer I highly recommend the creality ender 3 pro, it cost around 200-250 ish and is a solid starter printer. For a project like this the ender 3 would work just fine.

[@nathanshipley7960]

@@Studio_52 thanks! Great video

[@seifermedia]

I just got a file for the mask but Im not sure what dimensions to print it at. Do you remember the dimensions you used for your mask? Ill have to source out the print to someone else as I dont have a printer and want to make sure I get it right the first time

[@Studio_52]

Its about 6 in wide, and about 5.5-6 in tall depending how you measure

[@JJ-The-Kjng]

Do you need a 3d printer for this? I just don’t have the money and I want a cheap version

[@Studio_52]

Unfortunaetly yes, you could look into getting 3d printed by someone and shipped to you, should he cheaper than buying a printer. There are plenty of services online that do it, you can also find people on sites like etsy.

[@JJ-The-Kjng]

@@Studio_52 damn so someone can like do the thing for me? Uhhhh I’m so stressed

[@Studio_52]

@@JJ-The-Kjng yes just look up custom 3d printing on google, should come up with some results, shapeways is one business that does it I am aware of.

[@JJ-The-Kjng]

@@Studio_52 alright I wish I knew the price. Don’t they go for like 3000$?

[@Studio_52]

@@JJ-The-Kjng it shouldnt cost that much, and you can get a price estimate from the website.

[@mrzrrixgaming2738]

LOVE IT

[@3dburger]

Dang, I really thought that 100% coupon would work

[@huggywuggy2.059]

BRAVO SIX GOING DARK

[@blackguy_43]

now time to ask my parents for a 3d printer

[@cardboardbox8020]

Bro that’s fucking awesome

[@tr-3920]

amazing

[@MyJannier]

where to get the superhero cape?

[@Studio_52]

It was actually a blanket I just happen to have, repurposed to fit my needs.

[@katherineN83]

Can I just download and print it or do I have to pay for it

[@Studio_52]

The file I used does require purchase, but you can find free versions on thingiverse by searching ghost mask.

[@katherineN83]

@@Studio_52 ok thx

[@katherineN83]

@@Studio_52 but it's not g. Code how to I make it g. Code because I'm using a prusa mini

[@Studio_52]

@@katherineN83 you will need to download a 3D printer slicer, I use Cura by Ultimaker. There are tutorials online on how to slice a 3d model.

[@katherineN83]

@@Studio_52 ok thanks so much

[@BBlenderology]

Hello mate, how are you? Is there a cheaper or free model? The dollar is too much against my country's money.

[@Studio_52]

Sorry it took me a while to respond, there is a free model on Thingiverse, its not quite as accurate to the in-game model but it is very good, www.thingiverse.com/thing:4254015

[@spencerridling6925]

...as a autistic cosplayer I appreciate the humor and the levels of detail! Earned a sub my man.

[@Unknown-gn7zx]

GHOST RETRIBUTION mask

[@teronglasgow7014]

How much is the ghost mask

[@Studio_52]

I am sorry but the mask is not currently for sale, you can purchase the model and 3d print and make it youself, alternatively there a free 3d models available on thingiverse. If I should decide to sell the mask in the future I will be sure to let you know, but right now I do not have the time to make them.

[@teronglasgow7014]

@@Studio_52 wait so I could buy a 3d mask

[@Studio_52]

@@teronglasgow7014 you can buy the 3d model, which is a digital, and use it to 3d print the mask, there are also services which will print models for you if you dont have a printer for an additional cost.

[@teronglasgow7014]

What kind of paint you used for the mask

[@Studio_52]

@@teronglasgow7014 I used standard craft store acrylic paint, you get pretty much at any craft store.

[@MyJannier]

don't you sell it?

[@Studio_52]

I currently do not sell my builds as do not have the time to produce things full time, I mostly do builds as a hobby.

[@neoxmongral7024]

@@Studio_52 I would want to buy one if your willing to sell one

[@Iacino]

did you guy's hear something ?

[@infraredx697]

i like dat