Pros and Cons of Digital Printing | DTG VS DTF

[@markfisher8010]

Thank you for the video. Really helped with making decisions moving forward. All the best for the future of the channel.

[@Printeez]

Thanks Mark! Much appreciated. :)

[@onepiececlothing6507]

Nothing can replace screen printing

[@Printeez]

We have to agree! 🙌

[@nikebull41]

Best quality

[@Technobby]

Feeling on the shirt, durability and bulk orders wise, YES. For small customized orders with full colors printing, it's a hassle to screen printing. Each method has its own usages scenario.

[@Printeez]

@@Technobby Well said, every printing technique has its reason & advantages. :)

[@OutdoorActionDad]

Very interesting perspective. Thank you for sharing. IMO, There are significant differences in PRODUCTION PROCESS as well as QUALITY OUTPUT from DTG manufacturers. For example, inline pretreatment and settings built into a fabric library VS. manually applied pretreatment/separate machine. There's a control and consistency factor here... Low volume DTG equipment (Brother, Epson), requires offline pretreatment or pretreated garments (more expensive), adding production touch points, labor, & welcoming in the potential for good old "human error". Low volume users can get away with this production method, but will be challenged to scale effectively if looking to grow. This is one of the biggest areas where I see owners/operators struggle with DTG. Industrial volume equipment like Kornit Digital's has pretreatment incorporated into the process, using a WET on WET printing technology. Kornit DTG output vibrancy is unmatched. I like the Skull sample and I've seen it before. That came off of a Kornit, and not a Brother, right?

[@Printeez]

Very well said & explained! Couldn't have said it any better, this is exactly correct. This is very similar with DTF as well. Different machines & printing environment have a major impact on the end result. The advantage of these printing methods is ordering samples before doing a bulk production is fairly inexpensive compared to screen printing. So you might have to test out a few printing partners to find the best match for you!

[@tikdoe7563]

Have you used the kornit yourself?

[@OutdoorActionDad]

@@tikdoe7563 I have and do, yes.

[@tikdoe7563]

@@OutdoorActionDad Is it the kind of printing that feels like paper?

[@OutdoorActionDad]

@@tikdoe7563 No, that would be vinyl heat transfer that feels like paper. The output from a Kornit has a soft hand feel and also allows to print on everything from Cotton to Polyester.

[@Fast.DTF.Transfer]

Halloween may be over, but the spooky vibes live on with @‌fastdtftransfer's DTF printing of scary designs! 🎃💀

[@bilalballi5130]

This guy is fan of screen printing

[@juleswc]

Very nice breakdown, Thank You!

[@rahulpathak3213]

can you please tell me that which is better with high coloured designs ? I want to print designs on tote bag and I want primium quality. So which way I should go dtf or dtg ?

[@dorothywalter7951]

Great explanation!! Thanks!!

[@doyouknowminkwankim]

Thanks for the great video! I'm thinking of using DTF on my t-shirts for the upcoming season because it could print more accurate and vibrant colors, in my opinion. However, I also think that DTG is a better method for t-shirts cause it's more breathable. Could you please tell me how breathable DTF prints are compared to DTG prints? Thanks!

[@Printeez]

Thanks commenting on our video! :) Great question! It all depends on your design. If you have a large image, DTF will feel like a large patch similar to large heat transfers. If you have smaller detailed prints with a lot of space within the design, DTF is a great option. It's more vibrant and pops off the shirt a bit more than DTG, but not as much as screen printing. You can send us your design at [e-mail] & we will be able to guide you with what we think is the best printing option for you so you can contact your printing partner & let him know exactly what you want. Have a wonderful day!

[@doyouknowminkwankim]

@@Printeez Thank you so much for the detailed explanation! I'll send you an email. Thank you for the help!

[@EricLDC]

These places you can order your own prints to put on shirts from. Will they do videogame stuff? Like logos from it or pictures.

[@STATUSGLITCH2K]

I'm staring my clothing brand what should i use for best quality

[@alexsckoropad9540]

Depends on the design and type of apparel you are printing! But in most cases, DTF is the way to go! :)

[@STATUSGLITCH2K]

@@alexsckoropad9540 ok

[@STATUSGLITCH2K]

@@alexsckoropad9540 I'm have mostly anime design on t shirts I'm currently using Dts

[@jasonbinayug7544]

Is it good to have very smooth texture of print or is it better to have a little bit roughness on the print?

[@Pyxelles]

Thanks for the in-depth explanation but I'm still none the wiser 😁

[@Printeez]

😂 supposedly you need 10 000 hours to become good at something. 🧐

[@felixgarcia2044]

Hello I have a question I have cricut I was wondering if you know the best for screening printing and vynol for shirts and decals for cars

[@Printeez]

The best would be a Graphtech cutting plotter! 🙌🏼

[@zamanazam4196]

Dylan O'Brien? You Looks Like Him 🖤

[@222layers]

Do you find that DTF is as thick and uncomfortable as the internet says? In my samples I found DTG to be super comfortable but it just looks cheap and like it’s going to flake off and disintegrate quickly…(I got a gildan 5000 100% cotton shirt, as cotton was recommended for durability) Is DTF at all comparable in wearable comfort? Or is there a massive difference?

[@Printeez]

Hey! DTF quality and definition for vector file is hard to beat. If you are printing a photo or design on a light garment t-shirt without white, then DTG is the way to go. So the answer is it depends on the garment type, but moreover on the design itself. We currently do 90% of our production using DTF. We've got the newest technologies and the quality is just insane!

[@222layers]

@@Printeez ok cool thanks so much! I’m using printful for drop shipping. Unfortunately they don’t allow vector files so I have to export my vector files to PNG files at a mega high DPI for good quality. I’m getting 100% cotton Tshirts made. I have a DTF sample and the color is amazing and it feels super durable. But the DTG sample has a feel that makes me scared it’s going to disintegrate. Honestly the DTG is waaaay more comfortable, but I just don’t trust the longevity. In your experience, am I trippin? Does DTG really last? I’d love some real world reviews on how long DTG is really going to last or if DTF is just far superior. Thanks again this is really helpful!!!

[@bigotiti3152]

Im looking to design my own bootleg x streetwear shirts on 60% cotton 40%poly shirts, the designs should range from a4 to a3. Whats the best printing technique would u recommend? Thank you!

[@Printeez]

It really depends on the design & quantity you’re looking to order. I would either go with DTG or Screenprinting! 🙌🏼

[@salemv9197]

I thought you can't use dtf on 100 percent cotton

[@Printeez]

You sure can! :)

[@salemv9197]

@@Printeez Thanks 🙏

[@josealicea3765]

Is there a significant difference with the touch/feel of DTF compared to DTG. I've been doing DTF for about a year now and it doesn't feel bad but some people do complain that it feels a little stiff, etc... What are your thoughts? Thanks.

[@Printeez]

Hi Jose! It really depends what you prefer. DTF feels a lot more like heat transfer compared to DTG that feels more like screen printing but has that pretreat stiffness before the first wash. Of course if you buy or own a Kornit you won't have that Fixation stiffness because it evaporates in the oven at the same time the ink cures. You may also achieve different result with different cover sheets. Parchment paper or craft paper cover sheet will results in a more matte finish compared to a silicone cover sheet that will result in a gloss finish. We use this technique for all of our printing services, whether it's screen printing, DTG, DTF this helps achieve the gloss result you're looking for & leaves the print buttery smooth! :) You also have to think about the size of your print. If you're printing a large image 10"x10" on the front of the shirt it will always feel stiff! There's a few printing techniques that can help like using water based / discharge inks or printing with CMYK only with your DTG. Here's a link to a video we did explaining the differences between plastisol & water based inks. :) kzbin.info/www/bejne/noOziKetosZ7mrs I hope this helps! Let me know what you think & the result you achieve if you try DTG. :)

[@ahmadnurakmal996]

I have a ques, i have a large image (size a3) need to be print on hoodies. Should i use dtf or dtg ?

[@Printeez]

Depends on your garment type and logo but quickly I would go with DTF!

[@jessepadron5499]

Can you do samples?

[@tahneenicifore4447]

For dtf could you transfer on acrylic?

[@Printeez]

Great question! We've never tried to transfer onto acrylic because they usually melt under the press or lose the stretch rebound property. Will definitely try this one & see the result!

[@mertboz7934]

Hi i want ask a question , i want to make all over printing shirts and hoodies and which priting i need ti use ? Which is so soft and which is more expensive

[@Printeez]

Hi Mert! Thanks for writing in your question. Depending on what you're looking for this answer will vary. If you're looking for athletic wear then sublimation printing will be your best option. You have 2 options when it comes to sublimation. Fully cut & sew process or simply sublimating onto assembled blanks. Here's links to 2 great videos showing each option. Cut & Sew : kzbin.info/www/bejne/gnW7lmyMZ8iWnqc Heat pressed onto blanks : kzbin.info/www/bejne/j5SWoaZ_mdxjd6c If you're looking for more of a street wear option, all over print using discharge inks is a great option! Keep in mind, to achieve vibrant prints, discharge ink only works on natural fabrics. (cotton, bamboo, hemp, etc...) You may obtain vibrant prints on heather 50/50 blends if the actual synthetic part of the shirt isn't dyed. Look for heather shirts that contain white yarns. For exemple Solid black blends won't result in vibrant prints since the synthetic part of the shirt has already been dyed. All over print on both sides of a black 100% cotton shirt. kzbin.info/www/bejne/m5i8f6Gld9SenbM All over print on 100% cotton Gildan black shirts. kzbin.info/www/bejne/eaS1nmiiqb15ibM I hope this helped stir you in the right direction! Have a wonderful day.

[@mertboz7934]

@@Printeez realy thanks for your answer it will help me in am apricate that 🙏

[@mertboz7934]

@@Printeez actually i want to use dtf or dtg for all over print. Is this can be happen ? I am realy like vapor95 shirts but they use polyesters but i want to use cotton fabric

[@Printeez]

@@mertboz7934 I don't see DTF being a great option for All over print since the ink sits on top of the fabric similar to heat transfer prints. DTG would be awesome! The only thing is not many print shops have access to large platens that are capable to do all over printing. Standard print size is 12"x14" for most printers. Kornit's have the option for All over print since the machines are so big. Standard brother or epson machines are simply too small. You would have to print the shirts multiple times to obtain an all over print. Hope this helps! :)

[@eagleeyeprintingdesigning5443]

@@mertboz7934 NO. only sublimation works for all over print, reason being sublimation is a dye procedure and becomes part of the garment. DTF and DTG sits on the surface of the garment and it will not be comfortable

[@leviteapparel]

Cool channel like what you're doing just subscribe

[@JeffreyBalasan]

DTF can print in cotton shirt?

[@Printeez]

Yes of course!!

[@barbiemarie]

what's a good printer for DTF?

[@Printeez]

Brother GTX pro bulk is the best for us. Easy hot peel as well.

[@Alpha_DTF_Print]

Hey, Your prints are goals! 🌟 Curious if you've seen @‌AlphaDTFPrint's latest post on achieving vibrant DTF transfers? Join the conversation! #DTFPrinting #AlphaDTFPrint​

[@marnieltelimban499]

Can you set you dtf to matt finish print?if yes how?

[@Printeez]

You can get a mat finish by using a kraft paper when you press the press a second time. Ex: Press and peel, then add your kraft paper and press again. The DTF PET Film you are using can also play a role in the finish you get.

[@marnieltelimban499]

@@Printeez thank you so much

[@rockywinn]

Adhere

[@alexmartinez8806]

Someone here has very little or no experience at all with DTF. Because the info give about the colors in DTF is completely inaccurate. Recommend you do more research.

[@Printeez]

Thanks for your feedback Alex! :) This is the experience we've had with our DTF machines & wanted to share. Technology is advancing quickly, it's possible that there's a better DTF printing machine out there that we're not aware of. If you know any, please let us know, we love to learn & try to perfect our craft. :)

[@debbie7250]

100% agree! My colors are vibrant on dtf & I do all over placements on the same heat press except for hats.

[@Printeez]

@@debbie7250 That's awesome! :) We'd love to know more on how you're able to achieve accurate Pantone matches. If you could share your rip color profiling that would be awesome as well on what heat press & pads/cushion you use for all over printing. Just to be clear, this video is not talking about small laser DTF printers but large format inkjet DTF printers. Color profiling won't be the same as well as end result.

[@monicaxiao5471]

Hi, dear friend,. We are a Chinese DTF products supplier. Are you looking for a DTF machine？

[@SavetheRepublic]

Adares? Did you mean adhere? Elimadate? wtf is going on. Most screen print shop???? Who taught this fool how to speak? I can't take this seriously.

[@Printeez]

😂😂 ohh man Hard Truth fits you well. You’re correct he definitely needs to go back to school & learn how to speak properly. You should give him some insight on his french as well. 😏 Thank you for viewing & commenting on our video. It creates engagement for our channel. 🤗