2014 - 2020 Mazda 6 Front Door Speaker Install

[@ProvoBeastAudio]

Parts used linked in the description of the video!

[@vctrflrs3687]

How would I tell what’s wrong with my speakers?? I can hear good sound until I turn it up till the bass kicks in then it gets kinda distorted but if I really turn it all the way up it’ll sound like farts or like they are fried, ik ky doors are the problem I hear it coming directly from there but idk if my dash speakers are the problem too

[@lucca7457]

Did you manage to solve it?

[@vctrflrs3687]

@@lucca7457all my speakers where damaged and blown lmao, just got them replaced and upgraded and now I have a nice audio setup with subwoofers too. 10x better than before

[@danstackhouse7973]

Really helpful when replacing my door speaker thank you. The trim fasteners were definitely fiddly after 8 years, but it all went back together. If i were to do it again I'd go ahead and buy new fasteners.

[@gametechbuilds3755]

What you call that tool drill gun adapter for the top tweeter screw remover

[@erichughes3077]

Would have liked to have seen how you ran the new wire up into the dash.

[@hectorjaviersanchez9389]

Does anyone know the part# for a Bose passenger front door speaker??

[@UnitedStatesFBI]

For the factory tweeter wiring is their a wiring harness available so I can just plug it into the factory wiring? So that I don’t have to cut into the factory wiring?

[@DConstructiveCritic]

What a royal pain in the ass, just to change a single blown speaker.

[@Gmork-The-Nothing]

Hi do you need the aftermarket speaker mounting bracket? Why can't you just remove the factory speakers from their mounts and adhere the new ones into those? Just asking because I want to do this on my Mazda 6 2015, but am confused about the need for new brackets if you're installing the same size speakers as factory (6.5" if I'm correct).

[@itsval3508]

Are those 6,5inch?

[@LawrencePangelinan]

The whole speaker is built as one unit to the “bracket” you’re talking about. Stock speaker is just one piece

[@bravozavalaguillermojoel8864]

Can I install the speakers without the bracket?

[@id7200]

What size are the front door speakers?

[@pamelapryor7562]

Hey! Great Video, really appreciate all of the information!

[@normanbeaulieu4204]

This helped a hell of a lot. I was thinking about going to a shop to do this but now I can do it myself. I do have a problem though with my stock radio. It seems I have to really crank up the volume to hear it normally (to 30 plus) is that normal for these cars and should I get an amp or is there something I can do with the stock radio I don’t know about??

[@alexandravu5435]

My car has the same problem 😒

[@dianem.6118]

Me too mine is 2016 and I have to crank it up to 40 to get decent sound

[@mattbambrough724]

Can you use the factory tweeter wiring for the new tweeters and skip the crossover that came with the new speakers?

[@ProvoBeastAudio]

As long as the speakers include their own passive crossovers built in, you can run without separate passive ones like we used.

[@hitherescotty]

What did you do in the end? I have my door panel open now and am confused.

[@rrmorris67]

I've done a door speaker install in a 2003 mazda 3 and to get the new speakers to fit i just cut the stock ones apart and reused the oem spacer/bracketry. That car didn't have tweeters and I had to solder wires to connect to the stock harness clips. How many people have a clue what this crossover business is all about? I do not. On a 2014 mazda6 with the bose system can't I just swap in new speakers?

[@alphillips5478]

Dude! You should say Front DOOR Speakers Install

[@evanstone9915]

hopefully you see this but i have a 19' mazda 6 i want to know if the process is the same for the 5 channel amplifier is the same since i have a touch screen or do i have to get something different to make this work

[@kevinhancock4064]

Great where did you buy the speakers? And do you know how is best for me to connect my phone via USB not Bluetooth? It's greayed out cheers

[@momaey24]

You just saved me installation fees 👀😌💪🏾🗣🙏🏽

[@wowerman]

Hiya.Did you pick up external amp RCA from inputs of stock amp?Disconnected from stock amp or do you use both amp's to run speakers independently?

[@ProvoBeastAudio]

We did not have the Bose trim. If you are adding a new multi-channel amplifier, you will need to bypass the Bose amp.

[@kevinbrown8497]

Sold on the pajama pants right out the gate. Lovin it bro.

[@bravozavalaguillermojoel8864]

Hi can I use 2 ohm speakers in a non Bose unit?

[@michaelbehnken5348]

Is there a trick to getting the white clips out of the door?

[@rokstern]

Hi, Bro. Do i need instal crossower for front tweeters? Or i just connect them to stock cable without crossower? (maybe crossower already instaled somewhere for front stock tweeters? Thanks!

[@ProvoBeastAudio]

All depends on the tweeter you are installing. Check to see if the tweeter your are putting in has or requires a crossover.

[@jchr100]

Hi, there's space in the rear deck for 3.5" any recommendations to do the install?

[@MixingInActionStudios]

Glad I saw this cause I wondered how the adapters worked. Thanks!

[@mikemoe60]

What size are the tweeters?

[@quicksno]

I just bought the nvx set for front and rear. I'm installing a 4 channel 75w rms per channel amp too. Do I need to run thicker wires to the door speakers?

[@ProvoBeastAudio]

For just 75 watts RMS, factory wiring should be just fine.

[@HrpiDhaliwal]

Did they made big difference from the factory ones bro ? I am planning to get replaced as well and what size were they ? Thanks in advance

[@quicksno]

@@HrpiDhaliwal with the NVX speakers it's a significant improvement from stock. Especially after comparing them side by side. I think they're 6.5

[@markagate5060]

Very useful!

[@forfoxsakes7718]

Good luck with your warranty return with Skar Audio 🙄

[@kenhetro6742]

You shouldn't have to replace speakers in a car that is only a few years old. What a joke, for the amount of money you pay purchasing a new automobile. Shame on Mazda!!!

[@gabrielquinley4079]

You’re dumb💀