Dude! That's so cool that you've started printing the parts for the camera arm! Great video ✌️
@theherrdark48343 жыл бұрын
It is going to make his life a lot easier filming his vids.
@joshmcgregor53933 жыл бұрын
Thanks for designing that, I'm going to be making one soon. It's overkill for my little mirrorless, but too cool to not make.
@Zachary3DPrints3 жыл бұрын
Yes indeed, very cool, he did mention it a few times in several videos. I'm going to do something like that too...
@BLBlackDragon3 жыл бұрын
I don't have the space or need for the full rig, but I'm thinking of adapting the design for my space.
@birdpump3 жыл бұрын
Hello Mr. Chappel
@shreyabert15893 жыл бұрын
THAT RATTLE IS THE KEYRING ON THE USB STICK, MAKERS MUSE HAD THE SAME ISSUE!
@samnelson35263 жыл бұрын
I hope he sees this
@plokkum3 жыл бұрын
Yep, had me wondering too until I removed the keyring 😂
@aaronstarbird62393 жыл бұрын
So did I, took a while to figure that out haha.
@Rick-vm8bl3 жыл бұрын
Wait seriously?! It's been driving me crazy!
@markcahalan56983 жыл бұрын
really? Mine is the bowden tube, the filament is tapping it from the inside by the extruder during retractions. I stopped using the included flashdrive right away because it doesn't have a clear right-side up
@cyberreefguru3 жыл бұрын
Broken thermistor, bad bearing, and random rattle are not “minor” for a newbie (which is likely the target demographic) and represent some quality control problems. Could be a one off problem or something more systemic. Nevertheless good review Joel.
@thegeniusman87573 жыл бұрын
It seems like he has an early version. I remember the first few batches has issues like these.
@bkindt3 жыл бұрын
My model from Sep 20 had similar issues and more. It’s not just the early models with problems.
@daveglas19723 жыл бұрын
I've had mine for about 6 weeks now and put about 300 hours on it already, its a bloody workhorse.
@GdalyaRoth3 жыл бұрын
I have been running my mini almost continuously for 6 months now. The extruder makes a funny noise when it retracts and sometimes I hear a rattle, but it prints fine so I don't care. Compared to the constant TLC my first printer needed when I was a newbie a few years ago, this thing is a dream. It just prints well all of the time.
@cyberreefguru3 жыл бұрын
@@GdalyaRoth my first 'real' printer was a Prusa MK2 and it still works very well (though is showing its age). After purchasing a CR10, I do know what it is like to have a less feature-rich printer that needs more attention. I always recommend Prusa over anything else I've used.
@bkindt3 жыл бұрын
The Prusa Mini also has issues with jamming and clogging as well as with the Minda probe. Before you buy, I recommend reading their forums. I owned mine for about five weeks, during which time I only printed Prusament PLA using default settings. I had to (at the direction of Prusa support) completely take apart the extruder four times and the hot end twice, eventually replacing the entire hot end with a new one they sent me. Over the course of five weeks, the printer spent about half that time down for parts and repairs. Prusa support was excellent throughout, but at the end they agreed my unit needed to come back (at my shipping expense). Overall, it was a big disappointment. If you had a different experience, I’m happy for you. Mine wasn’t great.
@MichaelJHathaway3 жыл бұрын
I almost bought one of these until I found out that it does not have an all metal hot end and no one can give me a solid answer if you can upgrade the printer to have one. I understand that Prusa may be trying to keep this printer from being copied, but it already has been copied and the clone is half the price.
@robertgosz42813 жыл бұрын
@@MichaelJHathaway The clone is not half the price. It's more like $300 vs $440. And then you have to replace some parts that are not good enough...
@thewebexpert33113 жыл бұрын
I purchased my I3 Mark III as a kit; I had some problems with it, mostly due to errors in assembly. Eventually, after about three months, I returned it to Prusa and exchanged it for a pre-assembled model. I've had occasional issues with it over the last year, most notably a broken thermistor wire, which was an easy fix. I also had to replace my hotend, as mine had gotten fully jammed with PETG (that one was ALSO my fault). I've probably spent around $300 over the course of the year, but my printer is working like a champ. The print quality is still very, very high, and the reliability is awesome. All I really have to due is to insure there's enough glue stick applied to the PEI sheet, and my first layer goes down great; once I have a good first layer, the rest is easy. I could probably tweak the settings better - I do get some stringing now and then - but overall, I'm really happy with this machine - which is now a Mark 3S (the upgrade ended up being free - thanks, Josef). If the Mini is even half as good as the full-size, then I'd say it's an excellent buy. Before buying, I watched Maker's Muse, Tom Sandlanderer -- and of course, Joel; however, it was really Joel's review of the I3MkIII that put me over the top and helped me pick this printer over others I was looking at. I've been a fan of his ever since. TLDR; Please consider donating some money to the Seattle Children's Hospital. It's a really worthy cause, and we all need to help somehow.
@tamgaming98613 жыл бұрын
I have the complete same experience ... seems to be a well paid review like the most here ... forums are full of problems with this machine... i have also a creality ender 3 which has also things to update, but no problems so far and the print quality is better for a lower price, bigger printbed. I am very disappointed that you have to pay for a bug of prusa the shipping expense by your self!
@thewebexpert33113 жыл бұрын
@@tamgaming9861 In my experience, Joel's reviews are completely honest. He's not getting paid to review these machines. Yes, he's getting one for free -- but his opinions are still honest. He breaks down the plusses and minuses of each machine. I mean, if he weren't honest, would he have reported the problems with the machine? No.
@XXDoMi773 жыл бұрын
To everyone who's USB drive isn't recognized by the printer: You can try changing the partition table of the USB stick from GPT to MBR, as some printers don't like GPT. How you can do that? Open command prompt as administrator and enter "diskpart" > "list disk" > "select disk X" > "clean" > "convert MBR" > "create partition PRIMARY" > "select partition 1" > "format fs=fat32 quick". Just make sure you select the right disk, cause this is gonna wipe it. When done, the printer should have no problem recognizing the USB stick.
@SaltGrains_Fready3 жыл бұрын
I was figuring this as a condition. There's no reason Y U can't just use a different USB stick in place of the troublesome one as it's fixed up. They R EZ to come by.
@XXDoMi773 жыл бұрын
@@SaltGrains_Fready What exactly are you trying to tell me? No one ever said anything about, not just buying a replacement one everytime your Mac or some other device reformats it as GPT instead of MBR. If that's what you want to do, I am not gonna hold you back. You do you, as for everyone else who isn't willing to buy a new USB stick everytime it gets reformatted as GPT, my solution should be simple enough.
@SaltGrains_Fready3 жыл бұрын
@@XXDoMi77 I mean rotating them not just replacing all the time. Y does it always go to GBR in the first place..?? I uses only pc's for everything - I abandoned crapple 5 yrs ago after 25 yrs of bondage with them.
@TurboSunShine3 жыл бұрын
Thanks for showing off the engine benchmark! :D I'll might have to try to get my hands on one of these minis at some point!
@artemisthefox64573 жыл бұрын
I absolutely love my prusa mini. I have not had any issues with my machine so far and i love it to bits. I really appreciate having a machine i can trust to just work right out of the box and not give me trouble. If i even need to buy another machine i would get this one again in a heart beat.
@LJ-gu2dj Жыл бұрын
My USB stick stopped working, I popped it into my Mac, formatted it for MS-DOS and it works GREAT. Faster than ever. Love, Love, Love my Mini+. I get great prints and think Joseph Prusa is DA MAN!
@MrNlce303 жыл бұрын
That stack of filament had me triggered.
@florianix82723 жыл бұрын
in the last few seconds of the video they fell
@MrNlce303 жыл бұрын
@@florianix8272 I know but it was blurred.
@Qwarzz3 жыл бұрын
I was happy to see it was still almost falling over at a later cut. I was sure it fell over when he bumped it with the box :D
@JTJS-eh9mp3 жыл бұрын
6:14 those spools are really close to falling over
@florianix82723 жыл бұрын
in the last few seconds of the video they fell
@Kalvinjj3 жыл бұрын
That was an easy prediction it seems: 13:46
@NETBotic3 жыл бұрын
pure chaos
@colinbracher4053 жыл бұрын
Hi I have two Minis and a MK3S Prusa Printers. Like you I find the Mini to be a great machine, so much so I do not now use the MK3S unless the model needs a bigger building plate. Thank you for your entertaining and instructive videos.
@TheCarLovingSwede3 жыл бұрын
Every time there are some "layer inconsistencies" or imperfections of some sort Joel (and others) blame it on "the filament is not calibrated" or "settings not tweaked". Why is that? If there would be one instance where calibrating would be worth the time it would be a 3d printer review? I don't think this is fair
@AndrzejBrudniak3 жыл бұрын
I have that issue even with Prusament. Some guy with bondtech extruder also has that problem. Apart from that, the printer is great
@pmally20063 жыл бұрын
Over extrusion causes adhesion issues
@nils19663 жыл бұрын
This is called Issue 602, every printer has it and Prusa did alot a research to combat this issue.
@rayztech73843 жыл бұрын
I agree i would say that he is biased. Honestly its not bad for the price but an ender 3 would do similar if not better
@Netherlands0313 жыл бұрын
Yeah the 'filament not calibrated' doesn't make sense to me, sounds like Joel's printer suffers from the same over/under-extrusion issues that some other reviewers had, because the filament almost jams, causing underextrusion, then the jam starts moving and causes overextrusion.
@paulappleyard58323 жыл бұрын
We got ours last week for printing work test pieces it's been printing constantly over the weekend getting to understand it's limits. Really happy with the print quality in the past I've sent prototypes out and have had them made in SLS and SLA and honestly would be happy showing them to customers. I did have an issue yesterday when the extruder started clicking which I was disappointed about but the documentation on the website had me back up and running within an hour and I think I could sort the same issue out in 10 minutes now. One of the key reasons I went for it was the price point, the reputation of Prusa, but also being designed and engineered in Europe it has to meet certain safety standards which for me was a big selling point.
@johndegnan57033 жыл бұрын
I am very happy with my Mini. My USB stick also failed after a few prints, and I have noticed a occasional rattle while printing. But since my first Benchy (which printed flawlessly) I have been extremely pleased with my printer.
@overflow72763 жыл бұрын
I have had my Mini for about 3 months now and I can only partially agree. While it works absolutely fine (despite a lot of stringing) with Prusament, it was a complete nightmare with cheaper filaments. Naive young me thought it would be a good idea to purchase a plain white RYKE PLA spool from Amazon for prototyping. Oh boy. That was a mistake. I easily spent 10 hours of my freetime trying to get this stuff to even extrude properly. The nozzle constantly clogged and the extruder jammed regularly with this material. However, after hours of trial and error, cold pulls and extruder cleaning and idler tension adjustments I found a solution that worked somehow. I used a 0.6mm nozzle and printed at 230°C, which was the only way to get a proper extrusion. However, even with that milestone, I had some molten filament drip out of the hotend, like ABOVE the heaterblock, where the hotend is screwed into the heater block. This requires regular removal of molten PLA in hourly intervals during printing. Not cool! I tried to print that crappy filament away as fast as possible before something else went wrong and I was so happy when I could finally return to Prusament. Tldr: if you consider buying a Prusa Mini, do yourself a favour and stick to Prusament only. There are a lot of reports of people complaining that other filament brands just don't work on this machine. I learned it the hard way.
@arianimations62553 жыл бұрын
That camera arm is amazing, also cringing at the filament tower lol!
@thebigfut3 жыл бұрын
For that price I can think of other printers that will do just as well- including ecosystem- and give me more space to print. But what works for you, works for you.
@jackhorst90173 жыл бұрын
I started with an ender 3 and loved it but wanted to get a printer with bed leveling and quality. So I researched and purchased the mini. Best decision works great. The stock flexible bed is perfect for pla which I print in most often. Good buy.
@stuartwaudby35433 жыл бұрын
Hi Joel, thanks for the reviews and info, keep it up. This year I tried to become a Prusa boy too but failed. I bought a Mini with high hopes but sadly a major design flaw sent my mini back home and my Prusa boy membership was no more. Anyway enough of the banter. The MINDA type level probe is a huge problem in environments where the temperature is not constant. The trigger level varies with temperature. My print farm lives in out buildings which are not heated at night so the printers start cold in the morning and warm up through the day. The Prusa mini will not consistently level in this situation. The results are high first layers, nozzle dragging across the expensive print bed and prints stuck so tight to the bed that the bed is delaminated when removing. I don't have 30 minutes to set up the printer level for every print and there is no manual bed level option so the Prusa mini was totally unsuitable for me. Prusa appear to have attempted to cover up this issue by setting the minimum start temperature to 15C. This also renders the mini unusable for me for about 5 months a year. Buyer beware. The mini is great for indoor heated rooms but is unsuitable for colder print farm rooms.
@overflow72763 жыл бұрын
I second that! I had to improvise a construct with an enclosure, blankets ontop and hot waterbottles inside to get my Mini working in 12°C surroundings (my garage). This is just dumb. I have to leat it warm up at least one hour before I can even think of trying a first layer calibration. Prusa should have mentioned this when advertising this product. INDOORS ONLY!
@AlfredoEspinozaRhoton3 жыл бұрын
I've loved my mini so far. But out of the box it was very picky about filaments, with some heat creep issues. Strongly recommend the 3d party heat break upgrade. It fixes all the layer inconsistencies and works through any filament brand now. Also, the included USB flash stick developed bad sectors after a while that caused prints to fail/halt. Seems like I'm not the only one that had to throw away that stick.
@afry33013 жыл бұрын
I think the prusa mini is a perfect beginner 3D-Printer. I got mine in July. It's so easy and self-explaning. Easy building, Plug it in, Load filament, Plug usb-stick in, Print one of the example-models or slice something with the standard settings in prusa slicer. I think it works like a charm. I had NO problem until now. One thing I really don't like is the single Z-Axis, but the printer is stable enough.
@AgustinSaldias3 жыл бұрын
Joel the fan noise can be fixed by putting 1 or 2 drops of machine oil in the back of the fan (behind the sticker). That fixed it for me on a couple BTT fans.
@steveoffutt75913 жыл бұрын
You've inspired me to take the plunge into 3D printing and I have purchased this printer. Love the videos. Keep being you!
@nickungefug3643 жыл бұрын
How do you like it? I'm looking at purchasing it as well!
@steveoffutt75913 жыл бұрын
@@nickungefug364 I absolutely love it! The interface and community backing this printer are incredible. However, be prepared to wait (COVID). I ordered a kit in December and got it in March. It's worth it!
@nickungefug3643 жыл бұрын
@@steveoffutt7591 Thank you!
@hiroshamy2 жыл бұрын
I can't stop looking at that stack of filament roles teetering on the edge... It even starts wobbling for a bit on the verge of falling.
@harryragland78403 жыл бұрын
I bought a Prusa Mini this summer and it did take 8 weeks or more to get here. It is a great replacement for my Printrbot Simple Metal. I also couldn't get good results from the rough build plate and switched to the finer grain build plate. I too have the runout sensor. I have been using the color change by level feature of the Prusa Slic3r to give prints like my Ezekiel's Wheel puzzle a more interesting look. So far it's been great.
@tomschraml16523 жыл бұрын
Love your videos and it was a great review, but I really feel like you took it easy on Prusa here. Bad bearing/fan, making noises, bad thermistor, bad USB stick, a few print quality issues. I've been debating getting a second MK3 or a mini (or 2), but with issues like that there's no way I'd get a mini.
@UncleJessy3 жыл бұрын
Great review man! I had no idea Alexander had files for that camera arm!!!!!!!!!! Must find out more!
He has some great videos about different make things. love that channel
@Stefan_Rosenberg3 жыл бұрын
could be fun to watch one of you guys trying to assemble this arm :-D
@Zachary3DPrints3 жыл бұрын
Would be epic
@whowatwhere79363 жыл бұрын
Ur a frade
@plokkum3 жыл бұрын
I've been using the Mini for about 8 months now and it has gone through hundreds of prints. I keep it well maintained and only had to replace a single nozzle and PTFE-tube (the one it came with was too short). I keep having to adjust the settings though, while every screw is checked. I am getting a lot more stringing now than 8 months ago. But all in all it is holding up pretty well. I probably would have chosen the MK3 if I had to choose all over again, but all in all it is a nice quality little printer.
@MousePad9 Жыл бұрын
for anyone that is having the rattling problem its the part cooling fan mine does the same but I got a new one
@alexdavidsantiago39553 жыл бұрын
The Prusa Mini is my first printer and has been awesome!
@michaelbujaki24623 жыл бұрын
I've had my Prusa Mini since the beginning of September. I haven't encountered any problems related to the printer so far.
@enhidri1603 жыл бұрын
Nice! Got a FlashForge Finder in August.
@scifi_shop3 жыл бұрын
@@enhidri160 how's the flashforge. It was super loud for me.
@enhidri1603 жыл бұрын
@@scifi_shop Mine is fine, it's been working well Not the best quality, but a good longrunner.
@GreyDeathVaccine3 жыл бұрын
I ordered Sovol SV01 (my first) on Thursday at 10 am. On Wednesday at 10am I already had the printer. Absurdly fast international shipping. Many reviews praise this printer, but it is a relatively unknown. Tomorrow after work I will put it together and post info on YT as I get the printouts.
@l3d-3dmaker583 жыл бұрын
it's a prusa, it does what a prusa does, simply prints good like a prusa should, and for 350 bucks it's not bad at all compared to the mk3
@banny1234563 жыл бұрын
we have our mini for a week now and it's a great printer, plug & play prints, no Z-axis fiddling, no violent removing parts from the bed, great print quality. No complaints at all. We have two "old" Felix 3D printers and quality is night and day, for 1/5th the price.
@rcmaniac253 жыл бұрын
I just kept staring at the precariously balanced filament spools... I can say, my Mini is a "here's the print, usual make sure the first layer is good, walk away" printer. It just works.
@TagenigmaLLC3 жыл бұрын
I crank up the first layer to 265C for PLA to get it to stick really good. Your slicer should have an option to do this.
@EinBergSteiger3 жыл бұрын
Joel, I love your channel and I love my mini!!! I had the same two issues with mine. The noises near the cooling fan are caused by the wires that are so close. Just pull them away from the fan and it's good to go. I solved the USB drive issue by using a USB extension cable. Not sure why that worked. I think it has something to do with the physical connection.
@MMGZZ3 жыл бұрын
The MINDA probe is a nightmare for consistent mesh bed leveling. How much money could they be saving from using the heated PINDA probe?
@overflow72763 жыл бұрын
This! The minda is shit. I had to place my Mini in my garage where it has roughly 12°C during winter. If I don't give my Mini at least 1 hour of warmup-time inside its LACK enclosure the first layer calibration will be different between each and every print. So annoying! If you also intend to operate your Mini in cold surroundings, you will soon recognize that it refuses to even heat up when the measured temperature is below 15°C. My fix to that problem was placing a waterbottle with hot water ontop of the bed and moving the hotend close to it. After the bed has reached ~17°C you can heat up your enclosure with the bed itself. Protip: to keep the temperature constant over time cover your enclosure with blankets and place at least two other hot water bottles next to your printer. They work essentially like heat-batteries and can keep the air in the enclosure warm for about 8 hours straight! (With constant heatbed output that is!)
@DaveDarin3 жыл бұрын
Reason I am posting this is my recent neighborhood challenge, my machine vs. the original PRUSA. You might find this interesting. Just 4 months ago I entered the 3D printing world. Now, what machines did I start with? I was checking out snapmaker, as I thought how cool it would be to have 3D printing, laser and CNC in one unit. I then found Dobot MOOZ. For about 3 weeks I suffered with printhead jams and bed adhesion issues. Then I actually learned how to load filament correctly, surely different machine to machine. I now straighten 5 inches of filament, and I mean nail I preheat the nozzle to 200c and I gently feed it though the filament sensor that detects filament run out, then through the feeder gears. If filament is not nail straight it can, and has, run amok and tangled in the gears, now I have achieved perfection. Next the adhesion issues. Watching videos I tried painters tape, hairspray, glue stick, and FINALLY the solution that works like gold for me. The cheapest Elmers school glue. The one we remember as kids, the white, soap and water clean up. Ironically it seems stickier when still the cloudy white BUT wait till it fully dries to clear and, perfect stick. AND, as a bonus, just put a couple dabs of water on the dried glue, and the glue will remain on the build plate if you allow the bed to cool after printing. A couple dabs of water to make it that creamy white, let it dry to clear again and its reusable for about 5 or 6 times on the same Elmers glue bed covering. MANY MANY complaints on this Dobot MOOZ but this is funny. My neighbor has a PRUSA, the original. I actually get better prints than he does which stunned him. I did hook up with a second printer for a larger print volume, Sindoh DP200. BUT the MOOZ prints are significantly sharper but the Sindoh helps me with larger print size requirements.
@Bajicoy3 жыл бұрын
Two prusa mini's in our school's lab and they had severe jamming. Tried lots of hot/cold pulls, disassembling and reassembling, and reseating the ptfe tube in the extruder. If the tube is deformed or a particle gets stuck in the nozzle, the parts have to be replaced or at the very least for the ptfe tube flipped 180. Did not realize it was a single drive extruder until opening it up. They are functional, just need something a little more than a beginner's knowledge to keep them running which isn't too unique for the $450 price
@Bajicoy3 жыл бұрын
@npgoalkeeper _ tried the needle a few times and the printer jammed again in less than a minute of printing. The needle has worked before on other printers just no luck with the prusa mini
@siracer4203 жыл бұрын
Great review. I love my Minis. I use them in production line with my MK3Ss and they're all just great. For the bed thermistor, I had that issue on one and Prusa sent me a replacement that arrived in 3 days. About that USB stick that came with the MINI, it's garbage, just toss it. Neither of mine ever worked from the start and many others have reported the same. Keep up the great work!
@85rez3 жыл бұрын
I've got mine few months ago, I printed PLA, ASA and FLEX, without any problem. Just a cohesion issue, but was my fault because I didn't washed the bed. A great idea is to make an enclosure (mine is a foto enclosure like prusa suggested), ASA and FLEX are in an close box with silica gel.
@zachspross10843 жыл бұрын
The clicking you’re hearing is the extruder. There’s another video out there about this and he actually fixes the issue. I recently fixed mine but not well enough because the issue came back just a few days later. I had to: do a cold pull, unload the filament, completely take apart the extruder to access the large extruder gear inside and clean off inside the teeth on the filament gear with a steel brush. Then I removed the Boden tube that connects to the hot end and hand to loosen the 3 grub screws to be able to move the heatbreak around. I added thermal paste to the outside of the heatbreak and put it back in the hot end all the way up. The issue with this printer is that a small gap forms between the boden tube and the heat break. Bondtech actually has 2 products to fix this issue.
@bargeaup.63783 жыл бұрын
I had the same thing. But I solve it with thingtening the ptfe tube à little more than noticed. I screw the joining part, then unscrew it an half turn. (maybe 3/4) Push the heatbreak to the top and lock it with 3 little screws. Then screw the joining part to the max. With this method I solve the underextruction du to the gap. I had to clean the heatbreak perfectly to remove all the melted pla. (done it without the bowden and the joining part, with a wooden stick hotend at 250°C)
@yuvalbirger3 жыл бұрын
Finally!!!!!! I love your videos and i've been waiting for this review. The moment I saw a Prusa mini on a blue background I knew.... Tell maker's muse I'm waiting for him too :)
@BusinessButlers3 жыл бұрын
Only 8 weeks now lol when I ordered in Feb 2020 it took until July to arrive ! Have just fitted the Bondtech extruder upgrade and about to fit the Bondtech heat break component which hopefully will resolve the inherent design issues of the 'standard' Prusa product. It galls that one has to pay extra for those Bondtech upgrades and replacement bowden tubes (like overall about $100) despite acknowledged design faults. It is a great printer but the clogs once they begin never go away and hopefully they will be gone with the heat break and extruder. So, be prepared to add another $100 and wasted time and effort fixing the printer. That said, when the printer is at its best, then it is superb.
@nase12373 жыл бұрын
I also have the rattling and cooling fan spin-up noise problem, but on the MK3-S. What solved the fan problem for me was loosening the fan screws by half a turn so that the fan housing does not warp. After all, the fan hardly weighs anything (and the fan housing isn't very strong). I don't know if that works for the mini fan though. For the rattling I have to investigate further, but it might be a belt grinding somewhere. Thx for your awesome videos! Sorry for all the "fans" in my post, but I'm a big fan :-)
@wilurbean3 жыл бұрын
I just finished assembling my first Prusa, a MK3S, right then this video dropped. N I O C E
@usernamel-f9523 жыл бұрын
Well that is one type of timing.
@nelsoncabrera64643 жыл бұрын
That leaning tower of PLA had me stressed out waiting for it to fall. :)
@tartorus97293 жыл бұрын
I love that your making Alexandre's rig. I just discovered his channel it is amazing!!!
@alexfrost-head56923 жыл бұрын
I started with mine 2 weeks ago, it's going pretty well so far; no major issues to report. I can't quite get PLA to stick to the textured PEI sheet either, but I'm putting that down to me being a noob.
@thetable1233 жыл бұрын
The stock USB key was DOA on my Mini. Worked fine on PC, but would crash mid print.
@EmmaRitson3 жыл бұрын
I HAVE ONE. probably will get another soon. the issues are spot on, but way less than anything else in the price range.
@trondragon443 жыл бұрын
Really glad other people are having success with the Mini. Maybe one day I’ll buy another and try it again.
@malcolmpeake88933 жыл бұрын
I had the same issue with the supplied USB stick, so far the stick I'm using instead is okay. I put a 0.25mm nozzle on my Mini and I use it to print D&D miniatures and other small, fine detail parts and the results are great.
@Minecol53 жыл бұрын
I got this 3d printer a couple weeks ago, and I love it so much! It works so well, prints so smooth, and is super easy to use. But one interesting I noticed is that the red pla 1.75 Hatchbox filament printed better than the Royal Blue prusament. Does anybody know if there is a way I could get better prints with this filament? But overall it’s a great printer for the price.
@thegeniusman87573 жыл бұрын
Do you use prusaslicer?
@Minecol53 жыл бұрын
@@thegeniusman8757 sorry, didn’t see a reply. It’s 6 months later now, but yeah I do use Prusaslicer
@extrudr3 жыл бұрын
Awesome Joel, Thank you for the review of our greenTEC Pro. The Mini is a great printer! Best is to print GreenTEC pro with 220c and 230 max. Cooling on max. This should prevent the stringing issues. You know who to contact in case you have any issues ;)
@roberto_figuz3 жыл бұрын
I've been waiting for your review on it for so long. Keep coming looking for it :D Thanks
@Magician1693 жыл бұрын
How did the thermistor fail repetitive movement, or did it get caught on something?
@lukemurphy79173 жыл бұрын
My solutions to your mini problems: I find that with a little bit of stringing it can get caught in the fan and make strange noises, I had rattling but it was just the filament sensor tapping against the spool And if you make folders on the USB key it won’t read it which is annoying because you can’t organize it but just buy small cheap flash drives and label them or have two and alternate
@HowlingCurve3 жыл бұрын
I can't justify the price when you can get an ender 5 for around the same price and the pro version for just a little bit more, both of which have a larger build volume. The ender 5/5 pro are (in my opinion) more sturdier (giving less shaking and vibrations). I have an Ender 5 pro and absolutely love it except for the magnetic build plate that came with it as the plate under the magnet was 2mm higher (massive concaved surface) in the corners than the center (easily fixed with a glass build plate). Love your channel though mate, it's the go to channel for 3d printing in my home.
@earthspawn3d3 жыл бұрын
This is the most enjoyable printer I’ve had. That’s not objective at all but it is what it is. I’ve had Ultimaker S3, BCN3D Sigma R19, FLSUN QQ-S- Pro, Qidi XMax, Prusa MK3S and a few resin printers.
@thechink0902 жыл бұрын
This is my 2nd time watching this. both times watching I sat here waiting for the spool stack to fall over LOL
@erichanson44753 жыл бұрын
There is a known issue with bad USB sticks sent from Prusa. I got my Mini about 3 weeks ago, mixed results so far, but the only machine failures I've had were related to that USB. Had 3 failures with watchdog error resets because the USB stick they sent preloaded with files is physically bad in some way. everything i have sent through octoprint has worked great, everything printed with prusament looks great. now I just have to tune for stringing on this MatterHachers Build PLA.
@rdh20593 жыл бұрын
So... Lets see if I have this summarized correctly...Issue 1 - remove ring from memory stick. It will resolve an irritating vibration... Issue 2 - During first assembly, lubricate all the linear bearings. Will likely resolve some premature bearing failures... Issue 3 - Consider replacing the extruder, or more likely replace it if you get print failures or jams... (I'm going to replace it with a Mosquito, I think. It's lighter and should put less strain on the arm.) Issue 4 - Thermistor wires getting broken. These wires are really thin. Investigation needs done involving the "human factors" related to the thermistor. The only way I can think of where people do anything near the thermistor is when they change or clean a nozzle. If anyone uses wrenches or pliers, they need to be really careful with the wires. I think those were the issues mentioned here... Oh and Joel is not paid to do these reviews... ;-)
@MisterMakerNL3 жыл бұрын
Buyers beware, buying a Prusa have high chances of becoming a Prusa fanboy.
@bkindt3 жыл бұрын
I was very disappointed with my Mini, but I did receive prompt and responsive support from Prusa. I’d buy another printer from them, though probably not this one.
@Zachary3DPrints3 жыл бұрын
Nothing wrong with that. You have a Prusa, they are nice...
@ThantiK3 жыл бұрын
That's what we call confirmation bias.
@chuysaucedo71193 жыл бұрын
Nice review. Also enjoyed the live stream with your daughter. I've been running my mini sort of in production based type scenario. I really, really love that after the part is done, I just remove the stuff from the build sheet, and "reprint" click to start again. It's been consistent. Couldn't say the same for my Ender 3, unfortunately. I tried, I really did. I hope I can sell the goods im making, and buy a 2nd Mini
@MarinusMakesStuff3 жыл бұрын
I'm just waiting for the tower of filament rolls on the left to fall over! Ohhhh the suspense!!!
@JoeStanfordDoughty3 жыл бұрын
Just skip to the last 15 seconds 13:40
@MarinusMakesStuff3 жыл бұрын
@@JoeStanfordDoughty I know, I know, I saw it after replying 😉
@rescuebox73 жыл бұрын
For that noisy fan, if you pull of the sticker on the fan, you can oil the bushing. I have to oil mine pretty regularly.
@GustavoSanchez643 жыл бұрын
Hmm why does Prusa get a pass at glaring QC issues? I find it very odd that if an Ender had those problems it would be blasted at half the price. I just got into 3d printing but my custom Ender 3 Pro is better than this thing and was cheaper.
@polyglot843 жыл бұрын
Can’t wait to get my hands on one of these! The lead times are pretty long. Anyone else wish we had a Prusa factory stateside? If I were to win the lotto, I would absolutely look into it)))
@ipadize3 жыл бұрын
what about dimensional accuracy like thickness in X,Y and Z and squareness?
@markbenton43703 жыл бұрын
Loved the Video , Hope to see more of the construction of your over head video Camera Arm . Stay healthy and safe !
@WhereNerdyisCool3 жыл бұрын
Interesting review! I know others have had a lot of complaints about that direct drive setup. But you certainly don’t seem to have that issue at all! High Five!
@RobotWrangler3 жыл бұрын
To get the textured plate to stick I had to wash it thoroughly with soap and water (not the mini but its big brother). The before and after difference was amazing.
@loneflwolf7213 жыл бұрын
That's awesome it's so small and looks portable as all heck nice review Joel
@andrewmaclennan92832 жыл бұрын
for the raddling did you check to see if was just the key chain ring on the usb stick, It has happened to me multiple times
@gabe50773 жыл бұрын
Thanks so much i was waiting for this. Awesome video btw
@basmancreeert3 жыл бұрын
Hi Joel, I've been using the Prusa Mini for quite some time now and I absolutely love it! I had some technical problems in the beginning. There was a problem with the extruder but thanks to the awesome helpdesk I was able to fix that. Also my usb drive had a problem and it took me quite some time to figure out that was why the printer wasn't printing properly (it wouldn't let me change the settings during print anymore). This being my first 3d printer it was a bit of a learning curve but now I feel I really understand the machine. Great stuff!
@alexlandherr3 жыл бұрын
I got a Mini+ and it’s due to arrive on 2021-07-29. Will be making lots of parts for my Raspberry Pi:s.
@mikuja3 жыл бұрын
Hey, that sound your mini does... If its still not solved, check if the cables from heater and termistor are not touching the fan.
@chrisbaker97043 жыл бұрын
Asked my parents for this for christmas. Edit:didn't get it until my 18th birthday
@mitchellkasdin18993 жыл бұрын
Good review. You put a lot of effort into the video 👍
@MichaelJHathaway3 жыл бұрын
Great video Joel! I think the Prusa mini is really nice with great features. Is the Prusa mini open source?
@usernamel-f9523 жыл бұрын
Is Josef prusa rich as a mountain troll. Dumb question.
@IronHexacyanoferrate3 жыл бұрын
@@usernamel-f952 but it is open source...
@jasonchaney53823 жыл бұрын
I had the same problem with the USB stick. Only mine wouldn't read from the start. I just grabbed another one from the drawer, not a big deal, but I could see it being a huge deal for a noob that might not have USB sticks laying around or the troubleshooing skills to realize its just the drive and not the machine. Overall it's a great little machine though.
@tekelupharsin44263 жыл бұрын
I ordered my Mini a few days ago (my first 3D printer). These next 8 weeks are going to suck. 😩
@Bliblablub13 жыл бұрын
the fan is cuverd under warrantie... Same issue here
@fuzzybabyducks78783 жыл бұрын
USB drive: Make sure its fat32 with 4096kb cluster size. the fat32 driver on the board is fairly simple so its quite particular.
@woogaloo3 жыл бұрын
I loved watching Alexandre print them all and assemble everything! This really is tempting to pick up the mini (well in 2 months lol). That's a great price and would be nice to have a desktop size versus my Predator.
@andrewmaclennan92832 жыл бұрын
nevermind I saw the later part but I know what is causing it its just the wire touching the fan
@Skyentific3 жыл бұрын
Most probably this is going to be my next 3D printer!
@normanparker21033 жыл бұрын
The random rattle is the extrude they all do both of mine do it and it works fine
@andreask.26753 жыл бұрын
I had the same problem with the USB Stick. It works fine on my PC but not on the Mini. Tried to reformat and tried different printer firmwares. Other sticks work fine.
@Hawk19663 жыл бұрын
My only issue is the cantilever design. My 1st printer was a Monoprice Select Mini v2. It had a robust design, sheet metal instead of plastic and rails. Less than a year and I was getting sag on the arm. The small build plate is going to hinder people as well. I remember wanting to print this and that and several other things all of which I had ti resize to fit the small build volume. I went from my Monoprice to a CR-10s which while not perfect gave me the room to work with. The print quality of this Prusa is impressive. Not really sold on the price.
@ethansdad3d3 жыл бұрын
Looking forward to seeing more on the camera arm. Nice review and awesome T-shirt.
@redhonu3 жыл бұрын
About the USB, you could try to format it. Both windows and Mac have a built in tool.
@adamfermor26693 жыл бұрын
I can never get layer lines like this :-(
@wesamal63023 жыл бұрын
did you assemble the printer yourself?
@Zachary3DPrints3 жыл бұрын
Great review Joel, as always
@mcrotbot3 жыл бұрын
i love prusa more than most, i have 3 mk3 with mmu2. but it seems to me that you are giving prusa a pass on some things that we should not!, if this was a no name brand I cant help but feel you would be pushing the issue more, for the price there is a lot of options out there that you get a lot more if your willing to put up with some stuff. prusa is a top shelf price and the printer should match, don't get me wrong I'm sure that prusa treats there employs better than any one of the china printer company's does!. thanks for all you do Joel! I'm sure its a hard job, don't take any of us to seriously we are just a bunch of people on the web, stay awesome!.
@christianholderith76113 жыл бұрын
Great video! I am considering setting up a small print farm, and for the price and size, this might fit my needs....could get almost three of these for the price of one Mk3!!
@MMuraseofSandvich3 жыл бұрын
I ran into an annoying speed bump during calibration, but on 5th runthrough I was able to get it going. Best sub-$400 printer I've used, but then, I haven't touched a Creality machine. ;P Now I need to print that handle. Hopefully DesignSpark is a decent parametric CAD package, I have a few ideas I want to print up. Re: Stealing the bed thermistor from the MK2 Be very gentle with them wires, as they're thin and prone to breakage from just handling them, though they're not nearly as bad as the wires inside smartphones. Use alcohol to loosen up the adhesive if it won't come off willingly. You'll also need fresh metal (ideally copper, but aluminum should work) tape and Kapton tape.
@heselmas3 жыл бұрын
Love my mini. Out of the box perfect.
@louissenn98973 жыл бұрын
Mine works perfectly out of the box. Printing for 6weeks now and had not a single issuea at all