PrusaSlicer Beginner Tutorial: Learn the basics

[@mikehindley3]

This tutorial is amazing. Most 3D printer 'setup' videos assume you know what all these variables mean, but you've explained them in just enough detail to get me started. Thanks!

[@chopperchuck]

As someone who's been fabricating metal in the useful items for over 40 years as well as training others to do the same This is a very good tutorial you've figured out how to explain it to people without over talking it and keeping in mind that they have no idea what it is your talking about And I really like your clever use of the British accent to prevent me from turning off the video the moment you started talking about metric measurements Well done

[@3DRevolution]

Haha thanks, really appreciate that. And I'm glad the use of the British accent succeeded. I've been working on it my whole life for that very reason!

[@johnhoward8404]

This is the best software tutorial I have ever used

[@3DRevolution]

Thanks John, glad it was helpful.

[@Thadopeera]

And your comment is why I clicked on this video 🤣 Thanks

[@hani_issa]

THIS right here is the best tutorial i have ever watched in my life, the pacing, the amount of info per minute, it's just AMAZING and on point, instant subscribe !

[@3DRevolution]

Haha thanks, really glad you enjoyed it. You'll likely have noticed I'm currently in the middle of releasing a series I've made on 3D printing and the environment, but rest assured, plenty more tutorials on the way. On that note, if you liked this one, my PrusaSlicer beginners tutorial, you'll likely enjoy then moving onto my PrusaSlicer Advanced and Expert features video here: kzbin.info/www/bejne/l6a6f55un62Waac I've also got a whole playlist dedicated to tutorials I've done for different PrusaSlicer Features.

[@MrURA1986]

Because of this great tutorial I'm printing my first print. Thanks

[@3DRevolution]

Hope it goes well, happy printing! I'm here to help if you need me.

[@CrystalliteKK]

Surely I checked few of the videos, but detailed one by one step explanation will give any beginner the confidence to be self reliant. Thanks for the tutorial

[@3DRevolution]

You're most welcome, happy printing!

[@bettydaltonnewbold2019]

All I can say is THANK YOU, because as a new 3D printer with a new machine, I knew nothing at all about the Prusa slicer. I will definitely watch your other videos on the other features available in it.

[@3DRevolution]

Really glad it helped! Let me know if you have any problems going forwards, and happy printing.

[@ghargie5368]

Great video. You are very good at tutorials. Great clarity and very informative. More please!

[@3DRevolution]

Thanks very much, really glad you liked it. I've got a few videos filmed and I'm editing them this week so expect more soon (including the PrusaSlicer Advanced/Expert Tutorial).

[@stephensackett8920]

Thank you, I have been using Prusa Slicer for years but still haven't discovered all of the interactions and different features. I have one recommendation that will be helpful for complete nubs and that is to explain that the filament presets represent a group of default settings that should be sufficient to produce quality prints and normally don't need adjustment. Also that the adjustments available should be used only if the presets aren't adequate for some reason.

[@hedwigleemans6249]

well done - concise and to the point - got me going in 30 minutes

[@3DRevolution]

Fantastic, really glad it helped!

[@Real_Timo]

I didn’t know how to get support by my print. This video really helps me! ❤

[@ShieldJaguar]

Been using PrusaSlicer but didn't know what most of the functions are, now i have a much better idea......Thanks

[@3DRevolution]

Glad I could help! Happy printing!

[@Dominic-Noble]

Appreciate this tutorial, its helped me a ton.

[@3DRevolution]

Really glad it helped, thanks for the comment! Take care and happy printing.

[@sjkba]

Nice video! It seems that prusa slicer is very well thought out. I guess since they print parts of their printers, working with the slicer is part of the companies daily business so they have had an incentive to really nail it and it shows. Seems like I will switch to Prusaslicer

[@3DRevolution]

Yeah it's a fantastic bit of software, and pretty open source so lots of other great slicers are also based on it, including Bambu Studio, Orca Slicer, and a few others.

[@davidcuevas1392]

I'm surprised this doesn't have more views.

[@3DRevolution]

Thanks

[@philso7872]

Thanks for making this series of videos. They are great for beginners like me. After slicing the model, you used the sliders on the right side to go through the layers. At the same time, the G-code for each layer was displayed on the left side. How did you turn on G-code display? I could not find anything in the menus to do it. Is it possible to edit the G-code as one goes through the layers? I am trying to print a temperature tower and would like to change the extruder temperature for each level of the tower.

[@3DRevolution]

Hey, really sorry about the late reply. I'm really glad you enjoy the video, thanks for the comment! With the gCode preview, it only plays back when running through the length of each layer. So the slider on the side of the screen takes you through each of the layers, and then when you get to a specific layer, there's a similar bar on the bottom of the screen. As you scrub through that, the gCode will display. For editing gCode, you have a few options, but directly editing in that preview isn't possible. Depending on what you want to do, there's a section under 'Print Settings > Output options > Other' called "G-code substitutions". In here you can effectively do a find and replace on certain commands, figures or content on the gCode. That may be what you're after.

[@interdimensionaleagle6685]

Switching from cura to prusa and I found this video helpful, thanks! Waiting for 2.6 but in the mean time will be on 2.5 to get familiar with prusa. Cheers, also a new viewer here subbed and liked as well.

[@3DRevolution]

Really glad you found it helpful! Just so you know, you can download the beta version of 2.6 if you wanted to try some of the awesome features such as organic support. Thanks for the sub!

[@tampajoeyz230]

Thanks for the great video and helping me get up to speed using PrusaSlicer

[@3DRevolution]

Glad to help

[@thesecond5588]

I've been using an Ender clone (my first printer) but just ordered a Prusa Mini+; I thought it would be a good time to step away from Cura and into PrusaSlicer. Then I found your beginners tutorial. What a find. I'll be looking up your other vids. Thanks much.

[@3DRevolution]

Really glad it could be of help! Thanks for commenting! I'm hoping to release another couple of videos within the next week

[@goldshadow534]

Thank you so much!!! This us the best Tutorial so far. I'm new to 3D printing. This helps

[@3DRevolution]

Really glad it helps, welcome to the exciting world of 3D printing

[@HideOut55007]

Goodness I So Needed This Beginner Guide! Just finished building the Lerdge IX & I'm such a Noob & Totally Lost LOL. This is helping Thank You!

[@3DRevolution]

You got this, glad this could help!

[@hotsparklab]

Thanks for the Prusa Slicer tutorial. I was missing a few things you covered in my last (first) print. :)

[@3DRevolution]

Glad it was helpful!

[@steveh8724]

Just ordered a QIDI X-MAX 3 which has a modified Prusa slicer. Since I've never used the Prusa slicer, I'm hoping these tutorials will be applicable the QIDI branded fork of the PRUSA slicer. In any case, this intro tutorial was wonderful. Very clear and concise! Excellent video, audio, and graphics. Looking forward to going through this entire series. Subscribed!

[@3DRevolution]

You're going to have a great time with your X-Max 3. Thanks so much for commenting and do let me know if there's anything in particular you'd like me to cover in future videos.

[@jasonguzman7024]

Great tutorial. As a complete beginner, this really made getting started so much easier. Thanks!

[@3DRevolution]

Really glad it was helpful, happy printing!

[@audelmoradi5951]

Excellent tutorial. Thank you so much! This was incredibly helpful!

[@3DRevolution]

Glad it was helpful! Happy printing.

[@zk_6312]

Great video. I have been looking for something like this for Prusa Slicer. I normally use Cura, but sometimes I would like to use Prusa Slicer especially for models that are not water tight. One thing I have noticed though is the estimated printing time in Prusa Slicer is about twice what it is if I slice the model in Cura. I was wondering if you might know why.

[@3DRevolution]

Hmm, it's difficult to say exactly as so much could affect print times. Have you completed things like acceleration rates between your profiles on each slicer?

[@zk_6312]

@@3DRevolution Yes, I went through and changed some things and now it is still a little longer, but only about 30 minutes difference rather than a couple of hours.

[@JoshForwood]

@@zk_6312 ah that's good progress but I wonder what the remaining cause is. Very interesting, hope you figure it out, if I have any further thoughts I'll let you know

[@TheMikolasZuza]

That's a nice overview of all the basic features. :)

[@3DRevolution]

Thanks Mikolas, I hope people find it useful. I've got a mini series coming out soon covering all the features unlocked in the Advanced and Expert modes.

[@ukrytykrytyk8477]

Very nicely don tutorial. Looking forward to more tutorials on 3d printing!

[@3DRevolution]

Thanks glad you liked it! Make sure to check out my channel, plenty more 3D printing tutorials including several more specifically on PrusaSlicer

[@ukrytykrytyk8477]

@@3DRevolution Hey. I'm on them already ;) Keep up good work!

[@azerim2039]

Awesome video, PrusaSlicer looks quite intuitive

[@3DRevolution]

It really is. Arguably the best slicer around, very powerful and capable slicer, there's a reason it's used as the opensource basis for a lot of other slicers such as Bambu Studio and Orca Slicer

[@robertrandall4759]

An exceptional tutorial. Thanks loads.

[@3DRevolution]

You're very welcome, really hope it helped! Take care!

[@MyConcreteGuy]

Thank You, great rhythm on your presentation. I think I can print now.

[@3DRevolution]

Fantastic, well do let me know if there's anything at all you need help with. Take care!

[@DrDDDomIno]

Thanks!

[@3DRevolution]

And a massive thank you!

[@ryanroman1137]

That was very helpful and straightforward thank you.

[@3DRevolution]

Really glad it was helpful! Thanks for commenting and happy printing!

[@wjerling01]

Thanks for this! super informative and concise.

[@3DRevolution]

Hope it helped, thanks for commenting, and happy printing!

[@kingoftennis94]

add a sticker to you thumbnail for folks migrating from cura. this is a good introduction

[@abdulrahmanannatsheh522]

Thanks for this great tutorial

[@riggsron]

Just what I needed!

[@3DRevolution]

Glad it helped!

[@seankayll9017]

Cracking tutorial, thanks. Subscribed.

[@3DRevolution]

Glad you enjoyed it, hope it helps. Thanks for the sub!

[@StefanOlaru-le1xb]

Good intro to the Prusa Slicer, Have a good slice of bread and cheese!

[@3DRevolution]

Haha thank you, you too

[@bertkraan2817]

Very good for an absolute noob like me, thanks!!

[@3DRevolution]

No problem, glad it helped!

[@OrjanB]

Just what I needed, you got a new subscriber

[@3DRevolution]

Glad it helped, thanks for the sub!

[@9scorpions]

Bravo! Just got my MK4 and this is exactly what I needed to see/hear. Thanks so much. Cheers!

[@3DRevolution]

Glad it was helpful! Welcome to the 3D revolution, happy printing!

[@lovebirdslane5545]

Great tutorial! Thanks!

[@3DRevolution]

Thanks very much!

[@savinorojas6836]

Thanks! This was a really good tutorial!

[@3DRevolution]

I'm glad you like it, thanks! The advanced tutorial should be ready in the next few days, watch this space!

[@DinaLorr]

Thank you so much for this very informative video 👏🏿👏🏿👏🏿

[@3DRevolution]

Glad it was helpful!

[@joekarraker9477]

Really good tutorial!

[@3DRevolution]

Thanks Joe, glad you liked it and hope it helped!

[@SukottoSama]

new to printing and probably the worst thing about buying this ender 3 is my adhd idk how long it took me to look up how to make a gcode file. i found some a cat toy treat dispensers i liked hopefully one of them will print

[@BAHDK]

I'm going to purchase a Prusa mini plus. Can you please tell me, how do I turn a regular image (say a bird or phoenix) and make it 3d? From 2d to 3d? Excellent video, ty.

[@3DRevolution]

Hey, glad you liked the video, and I've no doubt you'll absolutely love your Prusa Mini Plus. Regarding how to convert a standard 2D image into a 3D model, it depends what sort of complexity you're talking. If you just wanted an extrusion of the shape (so a square on a piece of paper would become a 3D cube), then the most direct way is to import it into a 3D design software like Fusion 360, trace the shape and then extrude it into a model. If however you wanted to create a truly 3D shape (for example of a bird as per your suggestion), you're at that point bascally talking about full on 3D design. It does depend slightly on the file type of your image as if it's a vector file (SVG) you won't need to trace it, you should be able to just import it into a CAD application and extrude it.

[@TheNomios]

Great tutorial, thanks! ❤️

[@3DRevolution]

Thanks, glad you liked it!

[@xanhxanh5097]

thank you for making this tutorial!!

[@3DRevolution]

Glad it was helpful!

[@comander47]

I'm still trying to get the hang of prusa as honestly I find quite useful to be able to cut and edit pieces in the same software that I use to slice. Though Is difícult 😵‍💫 as I'm trying to reach the same level of comprehension I had for cura.

[@3DRevolution]

Keep at it, PrusaSlicer is a nice and user friendly setup. If you found my beginners tutorial video helpful but want to learn more, I've got a growing list of PrusaSlicer Tutorials which you can find here: kzbin.info/www/bejne/lZysooCGg7aBidk

[@michaelwirtzfeld7847]

Brilliant! Thank you.😀

[@3DRevolution]

And thank you for commenting! I'm glad it helped. Take care, and happy printing!

[@alexlouder]

thank you great walk-through.

[@3DRevolution]

Really glad it was helpful, thanks for your comment!

[@apflexin223]

Thank you, very helpful!

[@3DRevolution]

You're very welcome! Glad it was helpful!

[@pekwalker]

+1 on the great tutorial. I really enjoyed the presentation and look forward to your Advanced and Expert versions when they come out. Liked and Sub'd. Keep up the great work and be well.

[@3DRevolution]

Thanks Peter, really glad you enjoyed it. The next videos are running a bit behind schedule as I had a couple of bad weeks but hopefully will be back on it this week. Prusa Slicer expert should be next so watch this space! Thanks for the like and sub!

[@bluerider0988]

Great video. Thanks 👍

[@3DRevolution]

Thanks :)

[@aotero3157]

I have the Artillery Sidewinder X2 the build volume is 300x300x400. Is no place to put the z hight??

[@3DRevolution]

Absolutely. Once you've set your printer up, in PrusaSlicer, go to the 'Printer Settings' tab, and in the 'General' sub tab, the second item down under 'Size and Coordinates' is "Max print height". It's worth noting that this is designated as an advanced setting though so you need to ensure that the Advanced or Expert tab at the top right is selected first for this option to be displayed.

[@kevinwhite2478]

Nice Video I have a model that prints too thin ( shell ) I have tryed adding more perimeters and the shell dosn't alter, in the preview mode, is this the correct way to increase the shell thickness or will it have to be done in the cad drawing.

[@3DRevolution]

Thank you, and really sorry for the late reply. I hope you've solved your issue now but if not let's see if I can help. The first thing to check is that the shell thickness is only relevant to a solid object (let's say you just put a solid box in there. If however the model you were slicing was cup shaped, you wouldn't be able to make the walls of the cup thicker in the slicer, you'd want to change your original model.

[@relaxationsoundsandnoises7113]

When you cut the model in Prusa Slicer, does it also print a joining piece to join the cut parts together?

[@3DRevolution]

It doesn't. You'd need to either line the pieces up yourself and glue them, or you could in theory use the Negative Volume, and add Shape tools to create your own

[@doanduong1103]

thank you for great video 😍😍😍

[@3DRevolution]

Thanks, really glad it helped 🙂

[@Ricstroh]

Thank you!

[@3DRevolution]

Well thank you my valued viewer, happy printing

[@Gona21]

Great Tutorial for beginners! But I have a problem, when I'm trying to move objects on the print bed, they're seem to be attached to the middle of the bed and can't move them to another position, any solution?

[@3DRevolution]

Make sure you've not already sliced the model. Click on the cube in the bottom left (not the cube made of multiple layers) and try again. If you still can't move it by clicking and dragging it (which you should be able to do), try activating the move tool which is the top tool on the bar on the left (a square with a triangle on each side), and try dragging one of the arrows that appears on your model.

[@ufoquilter86]

What format type does the prusa use?

[@fulv_uk]

Very good video thank you

[@3DRevolution]

Thank you! Have a wonderful weekend!

[@fulv_uk]

@@3DRevolution and you thanks

[@deansicking6257]

Question: I have the Anycubic Kobra 2 Neo but it doesn't show up in the configuration wizard, how do I add it?

[@3DRevolution]

Hey Dean, I cover adding printers that aren't listed in the config wizzard near the start of this video. You can jump straight to it here: kzbin.info/www/bejne/lZysooCGg7aBidksi=0DgELxGLx16kVUiU&t=86

[@moiseslopez1628]

Would this software work with klipper ?

[@Shakes_The_Clone]

thank you

[@3DRevolution]

You're very welcome!

[@45alive98]

I have a rectangle in my project it is cut out but not very deep when I slice it. it fills it in so when I print it is sold. I also have 2 hole that are deeper and they are just fin. I'm using Creality Ender - 3 S1 Plus and Filament setting Creality PETG- What can I do to fix this

[@3DRevolution]

Hey there, could you explain a bit more what your issue is, I'm sorry I don't fully understand what you're describing.

[@45alive98]

Basically I have a hole in my project that doesn't go all the way through. When I make it into a file so I can print it. A software covers in the hole so when I print it there's no hole.

[@benjibbd1942]

what if the PLA filament i’m using isn’t listed. does that mean it’s not compatible with the printer?

[@3DRevolution]

No you can use any PLA. The different profiles of a particular material are just fine tweaks to the settings that allow for optimum printing of that exact filament manufacturer. But regardless, you can just edit the settings to whatever you want. Presets are just timesaving options that set up everything for a known material. But you can also create your own presents

[@RoninSr0704A1]

on the bottom right side i can not seem to get Slice to show like you have in the video? what am I doing Wrong?

[@3DRevolution]

Hey Robin, when you say it won't show like I have in the video, is it greyed out and unclickable? This is usually because there's some element of your setup that won't work (like your object is not placed on the build plate but off to the side). If you could grab a screenshot of your project, upload it somewhere and link here I can take a look, but I'm not sure how quickly I'll be able to take a look. Just so you know, channel members get access to the 3D Rev discord community, and also a more direct line of communication with me for help, that may be easier than on KZbin comments. However, I am always happy to help anyone on here, members or not. Once you send over a screenshot I'll take a look.

[@Bob-thenomad]

Hi i am anuby to 3D printing. I have watch your video but I don't see any where you can print directly from the computer with a USB at the moment that's the only way I can print on which is an artillery sidewinder x1 which I am to get second-hand as a guy give it away

[@3DRevolution]

The Artillery Sidewinder has an SD card slot, so you can just copy your gCode files output by your slicer onto the card, pop the card into your printer and use the printers screen and controlls to start the print.

[@arthurtorricer4544]

does it work with my snapmaker J1? Ultimaker cura doesn't work with my J1

[@3DRevolution]

I'm not 100% sure as I've not got a J1 to test it on. However, PrusaSlicer does have both the Snapmaker A250 and A350 series available as options in it's configuration wizard.

[@redneckgamer6447]

i cant get the z axis on my models to move it seems like its locked but idk how to move it

[@3DRevolution]

Are you trying to move or scale it? If you're trying to move it, are you trying to move it up or down? There are issues with moving something up or down. Up: You can't print something in mid-air so if you drag it up, it will snap back down to the bed. Down: If you move something down, then part of the model will be positioned below the print bed, which also isn't possible. If you wanted to only print the top of something, use the cut tool (I've covered how to do this in a video here: kzbin.info/www/bejne/jJWsan5uoZhrnposi=gMtKj-q_uV--JOeL)

[@rajub9126]

Thanks sir

[@3DRevolution]

You're very welcome, hope it helped!

[@jonmiller4952]

I have an anycubic kobra. How do I figure out what firmware it uses when setting it up at the beginning

[@3DRevolution]

Hey Jon. Did you want to find out what firmware version you've got installed to compare against newer builds or did you just want to know which style of firmware you have?

[@jonmiller4952]

@@3DRevolution which firmware the Kobra uses. I’m sure it’s the latest version but not sure what it’s called

[@3DRevolution]

@@jonmiller4952 I've not actually got an Anycubic Kobra, so I'm not 100% certain, but from what I understand, whilst many Anycubics have stayed away from Marlin firmware, the Kobra does use a Marlin derivative. So I think regarding Octoprint, selecting Marlin should be fine.

[@jonmiller4952]

@@3DRevolution thank you

[@Geezy4]

Can I use the same setting for 3dbenchy?

[@3DRevolution]

Hey Stephan, sorry for the late reply. This tutorial wasn't really indending to suggest specific settings (more for giving an understanding of what all the settings are so you can choose them yourself) as you'll want to use different settings depending on what printer you're using, what type of filament you're using (and from which supplier), what model you're printing, and what results you want from that model. The 3DBenchy is designed to be intended as a test design to see how your printer runs with certain settings and filaments, so there is no correct settings for that. However, as I mentioned, it also depends what printer and material you're using. If it's your first print, just use one of the presets in PrusaSlicer (making sure you select the correct filament that you're using), and then you can adjust any settings you need to based on the results of that print.

[@Geezy4]

@@3DRevolution printing on ender 3 pro with pla

[@mtbeyker9404]

I don't know what's happening when i launch PrusaSlicer. Instead of printer's buildplate i have only white screen. Everything besides buildplate preview remains the same. Can anybody tell be how to fix that?

[@3DRevolution]

Hmm that is odd. First thing to check, go to the "Printer Settings" tab at the top and check that our printer is selected in the dropdown box under the tabs. If it isn't select your printer, but if it is selected, or if your printer isn't available as an option from the drop-down menu, select 'Add/Remove printers' and follow the steps to re-add your printer. That should hopefully work, but if it's still not working for you, cou could try re-installing PrusaSlicer as that should solve any issue hidden in the background that's causing this.

[@mtbeyker9404]

@@3DRevolution Unfortunately this does not work too. Maybe its happening, because my printer is Creality ender3 s1 plus and there is only alpha version available. I think its sort of bug and it will get fixed in the future uptades. Anyways, thanks for Your help. Edit: I also tried to reinstall PrusaSlicer like 2 times and this also wasn't working. I guess I'll wait for a while and they're gonna fix it or I'm gonna do something diffrent. Luckily Cura works just fine and i already sliced some files with it.

[@3DRevolution]

@@mtbeyker9404 Ah sorry to hear that. Good luck in the fix, I'll comment back here if I come across anything that may help.

[@mtbeyker9404]

@@3DRevolution Thanks bro 🤜🤛

[@monsterstorm78]

Can ya use prusa slicer for any FDM printer

[@3DRevolution]

Yes, most slicers aren't printer specific so you can use them with pretty much any FDM printer. On some printers there may be specific functions that are exclusively available to their prefered or own brand slicer, but for the most part, any FDM slicer will work with any FDM printer.

[@monsterstorm78]

@@3DRevolution can ya do dual color prints with prusa slicer as well or no

[@3DRevolution]

@@monsterstorm78You can do multi-colour prints. If you're using a single extruder and want to set the filament to request a change on certain layers, you can follow my video here: kzbin.info/www/bejne/oarVnH2YedGWo6s If you're using a multi-material printer such as the Prusa XL, you need to set up a printer with multiple extruders and assign each colour to each extruder.

[@nikolaslabuda]

Can anyone help with the brim withd ? I dont know why but i cant set it

[@3DRevolution]

Ney Nikolas, sorry for the late reply. Are you still having issues with this? A few things can cause this. The first thing is you need to make sure you select a 'Brim Type' before you can select a 'Brim Width'. Do let me know if you're still having troubles.

[@GamesAddicted123]

How do i start the print???

[@3DRevolution]

It entirely depends what printer you have. For the majority of printers, you don't start a print from the slicer. A slicers job is to take the 3D model, the physical properties of your printer, and your desired settings, and to export a list of instructions for your printer to follow in the form of a .gcode file. For the majority of printers, you then want to take that file, place it on the SD card or MicroSD and inset it back in your printer, turn it on, load the filament you want to use, select the file and start the print. But that process all depends on the make and model of printer you have.

[@officialWWM]

Every time I run this programme, it crashes my printer :/

[@3DRevolution]

When you say it crashes your printer every time you run this programme, do you mean your printer needs to re-start after booting this programme and it connecting to your printer, or do you mean if you slice a print with PrusaSlicer and run it on your printer, it causes the toolhead to crash into something?

[@officialWWM]

@@3DRevolution sorry, I should be more clear. Whenever I’m done with all my editing and setting up, then I hit the slice button and it starts processing. It gets to about 60 percent through and my screen goes black and the computer does an automatic shut down and reboot!

[@ShewbieDoobieDoo]

My dude, I don't think you blinked once in that intro.

[@3DRevolution]

Haha blinking is overrated

[@pcarmy4351]

TIL birds have hollow bones!

[@sting0072007]

Bubby dubby

[@clonetrooper8355]

Dude, you look like you've been ai generated. unreal (literally)

[@3DRevolution]

I guess I'll take that as a compliment, haha

[@queerchameleon]

Would be helpful if you put a link to the other videos in this series in the description.

[@3DRevolution]

Hi there, sorry which videos were you after? This was my introductory video to PrusaSlicer, so when I posted this, I hadn't yet made any of the others, and hence hadn't put them in the description. The sequel to this episode is my 'PrusaSlicer Advanced & Expert Features Tutorial' which you can find here: kzbin.info/www/bejne/l6a6f55un62Waac However, you can access my playlist of all my PrusaSlicer tutorials via my channel page, or just click the link here: kzbin.info/aero/PLs1JXSLQ6-i6wekQWuthupCmNmsKa8nWg Hope that helps but do let me know if there was something else you were looking for