PS4 Pro sound before and after thermal pad and thermal paste upgrade

[@MrHobbyOne]

I did the same thing, with thermalright pad from Amazon and it's so huge !!! I mean it's almost not the same console, the lobby screen of warzone is not anymore a jet reactor, it's almost silent.. I'm so happy to have do this, I'm going to keep my PS4 PRO for a long time...

[@hesedazurin]

Fascinating!

[@toxicmo7105]

Arcitec thermal pads 1.5 mm (thick) Does it work ?

[@coyaltylard8630]

Can't say for sure, sorry. The stock thermal pads are 1 mm so I got the same thickness. A lot of people on the internet say 1 mm is the way to go, too.

[@agolovenskiy]

Hi. What if my ps is missing one thermal pad in RAM? Can it burn out?

[@Shikworld]

you might put a thermal pad to watch out memory modules

[@stugtodd2778]

Very much so.

[@noorazmi2329]

is that the sound of a hair dryer? oh yes. the name is PS4 Pro.

[@captainspaulding7612]

The thermal pad that you used is quality but you need to put it on the heatsink spot not on gpu vram and it should be less smaller than what you did it should not cover all the vram sides trust me i was wondering why my ps4 sound like jet engine after few days of replacing the pads i figured out that i was doing it in the wrong way after i replace it again now its so quite like if it was turned off no more heat and jet engine sound 🙂💔

[@captainspaulding7612]

@@andysixgaming6780 it should do the work 👍

[@datmanUK]

Hi can you explain what you mean?

[@captainspaulding7612]

@@datmanUK man i don't know how to explain it more for you but all i mean that you should put the thermal pads in the right way cause putting it wrong will make ps4 noisy again and it shouldn't be too large we need to cover the vrams on the motherboard but make it larger than needed could make it worse you should put it in the alimnium part not the black squares in the motherboard thats called vram this is the most important tip i have and it made my ps4 run quite again i hope you got my point and all clear to you

[@originaleggsample]

@@captainspaulding7612 as long as the ram can touch the metal cover via the thermal pad, it is good. so, doesn't matter where you put the pad first it will join and contact the two surface as soon as you screw down the metal cover.

[@captainspaulding7612]

@@originaleggsample thats good explanation agree on it

[@user-nb6kr3uf8i]

Did you keep the Delta fan or replace that as well?

[@coyaltylard8630]

Kept the fan.

[@TitusMH]

Get delta fan is more quieter

[@copperbackpack2025]

What model is yours

[@coyaltylard8630]

CUH-7006B

[@phifediggy9659]

@@coyaltylard8630 very surprised it's that quiet considering it's one the earliest models

[@coyaltylard8630]

@@phifediggy9659 weren't the first models the noisiest? www.pcmag.com/news/sony-rolls-out-a-quieter-ps4-pro?amp=true Or did you mean my early model should be much noisier than is shown in the video? Lol

[@leonardogh28]

Esto es la verdad a mí me pasó con los termal pads apenas se los cambie de le quito el ruido a los ventiladores.

[@coyaltylard8630]

Bueno saber. Sin embargo, ¿no cambió su pasta térmica? (Usé Google Translate)

[@leonardogh28]

@@coyaltylard8630 si primero solo cambie la pasta por que no sabia que tenia que cambiar tambien los termal pads entonces las revoluciones del ventilador cambiaron pero no mucho, osea seguia el ventilador a tope y haciendo como turbina de avion entonces le cambie la pasta termica nuevamente mas los 8 termal pads y listo funciona perfectamente mi PS4 Pro es de la version de salida del 2017 de las (ruidosas) ya con este cambio que le hice quedo como nueva, gracias.

[@coyaltylard8630]

Mi ps4 pro también es de 2017, lol. Tuve su placa base reemplazada bajo garantía solo unos meses después de su compra, ya que comenzó a no encenderse.

[@Shikworld]

este fin de semana cambie la psata termica a Mx5, y unos thermalpads Gelids y ahora esta como la seda

[@harambe_957]

Did you use thermal pads with adhesive or no?

[@coyaltylard8630]

The thermal pads were pretty sticky by themselves, if that's what you're asking.

[@mqdelros]

Good morning po. Tanong lang po pano po maglagay ng subtitles sa video po. Salamat po sa pagreply