PS4 Syscon Chip Swap Guide - Dump, Swap, and Rewrite Tutorial with Teensy++3 Crypt

[@bytemegoa]

Fantastic analysis of syscon chip. Hats off to you, Sir.

[@idreestech]

Thanks and welcome

[@sidoo5434]

This video is a big help for the community ❤

[@idreestech]

Glad it helped!

[@sidoo5434]

​@@idreestech I like collecting information everywhere And tiil now the cost of downgrading is so expensive 😢

[@mm0077]

Thank you for sharing. You always solder without microscope and that takes some doing.

[@idreestech]

Always!

[@رمضانبلظراف]

Can u do a video about reverting with this tool?

[@idreestech]

Maybe sometime.

[@yaqoobuddin]

Ps3 k regarding se baat karni

[@edmundbennett1993]

I was asking a ? An he dudnt respond bck to me about the ps3 slum update error code how to fix it oh men.hmm.

[@manishmittal5561]

Always waiting your video...pls posted on regularly basis

[@idreestech]

I will try my best

[@osergipano6377]

Excelente explicação, além de falar calmamente assim a tradução em legenda ser bem entendida. No Brasil há poucos técnicos que compartilham seu conhecimento e os que compartilham não explica tão bem.❤❤❤

[@idreestech]

❤️🤗❤️

[@aliaijaz1319]

Idrees Bhai I've been following you since very long your doing such a good job really appreciate it, Sir I'm having an issue my ps4 fat since last week that it keeps blinking blue light and showing no signal on tv i had sent it to repair center in Karachi but they couldn't fix it i think they only work on low level repairing like service could you fix mine please? Will be happy seeing your reply

[@idreestech]

Of course, I can give it a try to fix it.

[@ثورةشعب-ح1ح]

شكرا لك دائما أنت متميز تحيه لك من مصر ❤❤❤ لكن أين أجد البرامج هذه

[@idreestech]

Links are in discription.

[@amirwessam8191]

تحيه من مصر ومجهود جيد نحن نتعلم منك الكثير فعلا ما اسم البرامج المستخدمه لم اجدها فى الوصف

[@idreestech]

Try searching "Ps4 tool dowgrader"

[@taiyyabtaiyyab1151]

Bro 9.03 ko 9.00 me downgrte karana chata hu shi rhy gya ya nhi plis helpme bro

[@idreestech]

You should try it anyway.

[@Ps4Ps]

Cool.Can this tool make a downgrade?

[@idreestech]

Yes.

[@rabiusharefbabina2844]

Pls my ps3 slim cech 2100A have trophy problem am do update it show error 8002f147 pls me fix

[@idreestech]

kzbin.info/www/bejne/rWfEaKahhMuKepI

[@mohamedbezzeghoud4892]

After writing full dump syscon for ps4 pro , cant power on , any solution

[@idreestech]

Were both of the dumps identical?

[@idreestech]

If yes, the Syscon chip you are writing in could itself bad.

[@fakharraza9557]

Wating for ps3 video idrees bhai❤

[@idreestech]

Soon dear.

[@fakharraza9557]

@@idreestech 😇

[@edmundbennett1993]

MR.IDREES i ha e a ? I HAVE A ps3 slim it doesnt want to update it shows an error code allready change hard drive an its still show an error code 8002F1F9 update erro dk yu know which part of tbe mother board is giving dat problem so I can change the part my self.?

[@Wmtechzm]

check the voltages near the network chip or change the network chip

[@idreestech]

Bad bluetooth/WiFi card - this is easy to replace. Bad nor chip - this requires soldering. Bad Hard drive - this is easy to replace.

[@phoenixtiger101tube]

Hello, Can I ask which temp and air flow values did you use on the hot gun to desolder the syscon from the motherboard?

[@idreestech]

Usually, it is 380 degrees and airflow should be at medium level.

[@phoenixtiger101tube]

@@idreestech Thank you sir :)

[@habtwaberihun6087]

Is it possible to swap NOR too

[@idreestech]

Yes, but the software should be its original that will be rewritten into the new chip.

[@JC-ds4ds]

Hello, I have my PS4 FAT CUH-1115A SAB-001 board, I have a blue LED for 5 seconds and it turns off, the APU does not heat up, IT DOES NOT RECEIVE VOLTAGE IN THAT PART, I thought it was the syscon, I checked it thanks to you, I checked voltages and everything is ok, I analyzed it and did the dump and put it back in the patched one but, I still can't get out of it and it turns off, what can I do? Do I have to change the syscon?

[@idreestech]

If your APU isn't receiving voltage and the syscon checks out, you might need to look into other power supply components on the board.

[@kasulepatrick5586]

hi bro. i got another ps4. it beeps on touching the bluray button but does nothing on touching the power button. could it be the syscon.

[@idreestech]

@kasulepatrick5586 Hi there! If your PS4 beeps when you press the Blu-ray button but doesn’t respond to the power button, it could indeed be an issue with the syscon chip, as it controls power functions. However, it’s also worth checking the power button itself and the nearby components on the motherboard, as sometimes a loose or damaged connection can cause this issue. Good luck with the repair!

[@hamdiyasar]

I have many guestion in my mind. I would be grateful if you could answer. I have a PS4 PRO (CUH-7216B) has NVG-001 motherboard with SIE 94120AR-103 syscon chip on it. So can it be replace with A0# COL2 syscon chip models. many thanks

[@idreestech]

If you can dump flash from SIE 94120AR-103 SYSCON chip.

[@Axyradon112]

Hi sir In my case syscon chip is ok but the dump damaged What can i do? Thank you

[@idreestech]

@Axyradon112 Hi! If your Syscon chip is working but the dump is damaged, you could try BwE to see if he can help you.

[@jogg5804]

Is it possible to have piggyback two syscons and two bios chips and give them power switch between them (and ofc putting two diffrent hdds) to run on diffrent firmwares? I mean one HDD bios and syscon on 9.00 and other on latest firmware?

[@idreestech]

Never tried it. But not possible as the SYSCON with different versions patches the NOR.

[@dshahg9901]

Assalamu alaikum sir kayse hain

[@idreestech]

Fine, TY!

[@Armwrsling]

Link for bay it plz

[@idreestech]

www.pjrc.com/store/teensy40.html

[@nicholaspsorogiannis]

Can you buy a new syscon chip from Renesas or does it have to be from another ps4?

[@nicholaspsorogiannis]

I have identical backups of NOR and Syscon.

[@idreestech]

You can buy a new one to flash the back up into it.

[@nikkam3176]

is it possible to downgrade without the original hard drive?

[@idreestech]

Sure, yes.

[@mudrek_10]

I'm sorry. But why you removed the chip?

[@idreestech]

Kindly ensure that you watch the entire video.

[@mudrek_10]

@@idreestech yeah i was in a hurry

[@muratrisvan]

Thanx master ❤️🇹🇷

[@alxvlky]

Is it possible to use Raspberry Pi Pico instead of Teensy?

[@idreestech]

Maybe, but I never used it.

[@مهندسالم-ذ2س]

very good

[@idreestech]

Thank you! Cheers!

[@gamurrrrr7898]

does all ps4 pro support this syscon glitch?

[@idreestech]

In PS4 pro models, the syscon volts should be low. You can install an additional regulator to limit volts down to 2.8 volts. Otherwise, the Teensy++ may cause the process to hang in the middle, especially during the write process.

[@Zezo-xq9xq]

Can you use tenssy 2.0 Or should we use tenssy 2++

[@idreestech]

Teensy++2 is fine. But it is better to use Teensy 4, especially for Slim and Pro models.

[@Zezo-xq9xq]

@@idreestech Please, is there a way to connect Tenssy 2.0 to a keyboard?

[@idreestech]

If you can find or make its keyboard .hex or .bin file then of course you can connect it to a keyboard.

[@idreestech]

Arduino is also an option.

[@kasulepatrick5586]

i always get error entering debug mode

[@idreestech]

First of all check the wiring between your Teensy and the SYSCON chip, if it still doesn't read well, use the Teensy Four, it works fine for all models.

[@kasulepatrick5586]

by the way I broke the pin. I tried to trace it but now even the PS4 doesn't. maybe I damaged the syscon. my resistor is 100 ohm 3w could it be the problem

[@idreestech]

It sounds like you're dealing with a tricky situation. Breaking a pin while trying to trace it could indeed cause issues with the system, especially if it involves the syscon (System Controller), which manages power and system functions in the PS4. Please make sure to inspect the pin for repairs. If you haven't already, please try resoldering the broken pin or bridging the trace using a small wire to ensure a proper connection. You can also grind some area around the broken pin for a better connection.

[@idreestech]

You can use the resistance at 100 to 200 Ohms. 180 Ohmes is a good choice. By the way, watts do not matter.

[@kasulepatrick5586]

Thanks so much. I got 150ohm resistor. I managed to dump the syscon now I'm waiting to get another syscon chip such that I can swap them. thank you very much

[@TOMelectronicsfix]

good job

[@idreestech]

Thank you! Cheers!

[@Bugga_sdn]

Hi pro I want to ask you when I haven't ps4 syscon chip can I find it on ps3 or ps 2 or other device Really I have dead Syscon ps4 fat touch help plz

[@Bugga_sdn]

And how I can program it

[@idreestech]

No.

[@taiyyabtaiyyab1151]

Bhai aapki video acchi lagi lekin samajh Nahin Aaya thoda Hindi mein bnao na bhai 😍😃🙄

[@idreestech]

Google can translate it into Hindi. Use the CC option in the video.