PSA Micro & SCT43sc tabletop talk.

Quick video going over my PSA Micro Dagger and SCT43sc/Micro set ups.
Really like these two set ups and have been having tons of fun training with them.
Let me know if you would like a range comparison with both as well.
Please like, comment and sub!
Huge shout out and thanks to the following people! Make sure to give em a follow!
Ridin Dirty Outdoors:
KZbin
youtube.com/@RidinDirtyOutdoo...
IG
ridin_dirty...
Bordertown Holsters:
www.bordertownholsters.com
IG
bordertownh...
DeltaD80:
KZbin
youtube.com/@DeltaD80?si=jGUJ...
IG
deltad80?ig...
Tactical Pontoon:
KZbin
youtube.com/@tacticalpontoon?...
IG
tactical_po...

[@RidinDirtyOutdoors]

Thanks for the shoutout! SCT frame is looking killer and seems to fit the slide better 🤙🏼

[@DesertTactical]

Nah, bruh. Thank you for the pocket knife. Its friggin cool. Yeah that SCT is definitely sexy AF. 🔥 Thanks for all your support, man.

[@PlanetRibooted]

I have two of these SCT 43 frames. They need some hand tuning. I’ve noticed that the rails are set about 1/2mm taller than an OEM Glock 43x frame. This was causing an issue with the connector not reliably resetting the trigger. Near 100% failure rate on one frame and about 1 in 20 on the second frame. Had to bend the connector ear upwards and the entire connector bar to the right hand side of the frame. Works 100% so far, but want to run another 200 rounds through each before I call it good.

[@lionruntz]

How’s the sct build holding up since you’ve had it? Just ordered a sct with the psa c1 extended slide & cant wait! Would love to see a follow up video

[@triggerbarPhD]

Great side by side!!

[@louiel8569]

Great input. Thanks!

[@DesertTactical]

Thank you!

[@triggerbarPhD]

Great comparison!

[@DesertTactical]

Thank you!

[@VPTACTICAL]

I really want to try those SCT frames, your setups are looking good! 🤙🏻🤙🏻

[@DesertTactical]

The SCT43 is really effin nice, man! Thank you for stopping by!

[@VPTACTICAL]

@@DesertTactical Absolutely, I’ll check them out!

[@Greystone42]

I’d love to get ahold of a micro dagger to beat on. That SCT looks solid too.

[@tradbowtimewithuncledan2686]

Nice comparison sir.

[@DesertTactical]

Thank you!

[@graydogllc]

Excellent comparo. I just took possession of a PSA Micro Dagger from my friend, I am going to wring it out over the next few weeks! Appreciate the inspiration for this sort of content!

[@DesertTactical]

Thanks for stopping by! Appreciate the support!

[@OneRyLove]

Just got a SCT frame and the Micro dagger slide. Can’t wait to put it together. Just gotta get an optic and light now.

[@DesertTactical]

Thats cool! Its a good combination!

[@OneRyLove]

@@DesertTactical did the new slide release work? I was listening but also at work so I couldn’t hear that well. I need to know which one I should buy.

[@DesertTactical]

@@OneRyLove the slide release is still the factory one.

[@OneRyLove]

@@DesertTactical oh I thought you had mentioned that it wasn’t working okay cool.

[@k.b.7342]

I noticed you shaved off those bumps on the SCT43sc. I did the same thing with mines. Thank you for your comparison on these two.

[@DesertTactical]

Honestly… I havent done any modifications to either frame other than new triggers…

[@_fernlion]

Do you have psa micro mags? If so do you struggle to get the mags in when they are fully loaded and the slide is locked back? Because I sadly do. Instead of the mag sliding in with little to no pressure I have to force it in there. It’s harder to put the mag in with the slide locked than with the slide forward.

[@MF-Rell]

​@@_fernlion Hand Rack it about 500 times. The round is hard to get in the mag at first but after a few times cycling full mags it loosened up a bit.

[@CarolinaEDCreviews]

I got recently the G43X and I like it more then the standard G43, as for the dagger I like to try their dagger micro C-1

[@DesertTactical]

I really want to try a threaded barrel and micro comp for the micro dagger.

[@babayagagamer]

Did you just get the standard Glock 43X or the Glock 43X MOS model for the holster selection? Obviously with light option

[@DesertTactical]

I went with the Dagger holster. This isnt a glock holster made to fit the dagger. Its a micro dagger specific holster.

[@MF-Rell]

Cya makes a good holster. I made the mistake of ordering a psa dagger holster with a aim surplus slide. It doesn't work. Just get a 43x holster if you do that.

[@mr.mr.3301]

I’d be curious is the play between slid and frame is the same if you swap the two. I think the green slide is cerakoted. Or sure about the black one.

[@DesertTactical]

The SCT has thicker rails. Better lock-up thus less play.

[@toddparsons2980]

Both seem viable. 👍

[@DesertTactical]

So far so good with both.

[@jerroddooley374]

The Sct frame is just down right sexy

[@DesertTactical]

100% agree

[@_fernlion]

Do you have psa micro mags? If so do you struggle to get the mags in when they are fully loaded and the slide is locked back? Because I sadly do. Instead of the mag sliding in with little to no pressure I have to force it in there. It’s harder to put the mag in with the slide locked than with the slide forward.

[@DesertTactical]

Yes I have 3 PSA Mags. No issues yet.

[@itzyaboilostkauz4472]

I would love to see sct frame with cr920p slide and see if it would wrk

[@ShovelShovel]

missed opportunity not showing the slide lock on the psa if this was a comparison

[@mattknower8073]

How reliable is the PSA magazine?

[@DesertTactical]

It has been good. No issues.

[@kyzmn]

Would I have to get a p80 g43 holster for the sct?

[@DesertTactical]

Id hit up Bordertown Holsters and get a SCT43sc specific Holster. :)

[@RicoT08]

I just got the miro dagger and i want to change the trigger to the one you have. Can you tell me exactly what i need to get for the trigger. Please tell me what to order. I hate the psa tragger. Thanks

[@DesertTactical]

Well which one? The Peacemaker or the Boogeyman. Either way, check em out at Tactical Pontoon. Highly recommend the Peacemaker Micro Dagger tune up kit.

[@RicoT08]

​@@DesertTactical peacemaker

[@DesertTactical]

@@RicoT08 go on his site and look for the micro dagger peacemaker tune up kit.

[@RicoT08]

​@@DesertTacticalthank you

[@a10sim]

Excellent review. Picking up a Micro Dagger at my FFL tomorrow. Looks like a trigger upgrade is in my future. Thanks again for the information. Liked and subscribed.

[@Stormtrooper_Accuracy]

So this is what a functional Dagger Micro looks like huh?

[@DesertTactical]

I’m pretty decent at fine tuning triggers/pistols. Learned the ways when I put together my first couple slides/frames. Getting a stripped slide and frame and fine tuning gets you a boat load of knowledge. I REALLY dig your channel. I’m tuned in to see what you do with your daggers. If you need any help, hit me up on IG. I already sent you a message. ;)

[@trojansky2348]

I think these look cool, but as for ccw, I can’t carry a Frankenstein gun.

[@DesertTactical]

Understandable.

[@oakwoodmike]

I heard the sct frames are OEM Glock internals and the PSA are off slightly.

[@DesertTactical]

Psa Micro Frame?

[@oakwoodmike]

@@DesertTactical yes. They aren't exactly oem.

[@DesertTactical]

@@oakwoodmike Yeah. Most definitely. The PSA Micro does not have OEM parts. Thats for sure.

[@MF-Rell]

The site says it's an sct lower parts kit.

[@RidinDirtyOutdoors]

First

[@DesertTactical]

Dang, Boooooi! 💨

[@icarrymyrevolverinsingleac9564]

Got a notification…Sct was gone fast!!!!!!!!!😡

[@DesertTactical]

They are hot🔥. Gotta be fast!

[@DeltaD80]

Yes they were. I got one the night before my notification.

[@jason200912]

Both frames cost the same but sct is higher quality. So get the sct frame

[@DesertTactical]

Yup

[@mr.mr.3301]

What makes the sct higher quality?

[@DesertTactical]

@@mr.mr.3301 OEM glock parts. Better tolerances, better reliability. Grip is fantastic.

[@jason200912]

@@mr.mr.3301 they got better trigger guard undercut and stipling and a pinky lock in bump. And the front and back strap has ribbed grip grooves. And apparently there's now a magpul grip trapdoor for the frame where you can easily clip in and off a competition magazine guide. I think the micro dagger also has 1 part that doesn't take glock 43x.... something about the trigger related area but I don't remember which part

[@thelastamerican1776]

Tactical pontoon trigger is expensive

[@DesertTactical]

Its not cheap. However, you pay for an excellent product backed up by amazing craftmanship and customer service. There are other options available out there. Get whatever works for you.

[@DeltaD80]

Great review and comparison between the two frames. Are the slide lock issues with OEM mags or all mags? Dont forget, Micro Daggers are having worse slide release issues. kzbin.info/www/bejne/eKaXnId9maqihcUsi=B_VXjNSjOoD8NscD Awsome to see your take on them both. Great minds thinking alike. 😉

[@DesertTactical]

Yeah I watched that video. Sucks.

[@DeltaD80]

@DesertTactical what mags have you had problems with?

[@DesertTactical]

@@DeltaD80 none. However I cant get an ETS G43 10rnd mag that I have to work on either one. Lol

[@DeltaD80]

@@DesertTactical that would be a mag issue then. What brand did your buddies have problems with. Or do you know which brand of mag is a problem?

[@DesertTactical]

@@DeltaD80 unsure what mags he tried. It very well might be a mag thing…

[@cv600rr]

You loat all credibility when you "cleared" the pistols.

[@DesertTactical]

🤣🤣🤣🤣

[@bikerchapin]

Hello! Nice comparison! By the way do you have discounts on the holsters? I was watching yours is nice and I think you can also use your holster with a Glock 48 or threaded barrel in your 43 slide! Nice!

[@DesertTactical]

Yes. Use code "MicroFB" for 15% off on their website.

[@bikerchapin]

@@DesertTactical Awesome! Thank you! 😊