PSE Mach 34 vs Hoyt RX7 Ultra | Carbon vs Carbon Bow Review

[@maplehappy]

holy shit you guys just solved a mystery i've had! I have a PSE brute atk and its always had a little pop during the draw cycle! It sounded like it was coming from the top cam, i thought it might be some kind of debris in the limb pocket or something. the limbs are of course fine and i couldnt tell what it was, just been shooting with it. the tip about the wax worked! its 11 pm here and as soon as i saw that part on the 30 inch mach i went and waxed my mod right away and it worked immediately! yall are the best love what yall do! thanks so much!

[@brucescott7023]

Everybody keeps saying the Hoyt Rx7 with its extra 1/2lb in weight plus a extra lump of rubber on the front of it which makes it nearly a lb heavier is Deader than the Pse Carbon bows. I'm thinking it's time guys you put that Lump of Rubber plus weights on The Pse Carbon bow to make it up to the same weight as the Hoyt Rx7 and then give us your thoughts in a video. Just an idea like🤔🤗

[@edgrabowski6797]

Hoyt is better than pse

[@samzarate4468]

I currently run a RX7 ultra and love it! Shooting 29” draw at 80lbs. 450 grain arrow shooting 286 fps

[@travisalderete5386]

Don’t let the hate get in on the spotlight boys they love the honorable mentions! Keep the content rolling it’s good stuff! Thanks for getting some different content out there!

[@jimputnam7539]

Wow that S2 cam puts out the efficiency for shorter draw lengths! Price of each would’ve been cool to hear, overall great information you fellas put out in this video. 👍🏻

[@heberkapcsos7730]

I have the RX7 ultra and it’s absolutely awesome!

[@shaynestallsworth1864]

yall was wrong in your commentary the rx7ultra was keeping up with the pse s cam in performance on 30" and beat the ecam at 30"

[@Masonm109]

Pse knocked it out of the park with the Mach 34, good speeds with the forgiveness of the ~7” bh. I would run the ec cam just for the great draw but ability to have a long draw e2 and short draw s2. Giving every archer a choice on this platform.

[@kylemacdonell1450]

The RX7 Ultra does everything better, than the mach 34. with EC cams . Literally EVERYTHING

[@Masonm109]

@@kylemacdonell1450 yes the Hoyt rx-7 is a very nice bow, I will tell that to anyone. But what’s the point of paying $1899 for a 4.3 lb bow when you can save $450 and go with aluminum version. Pse at least has a significant weight savings compared to the Hoyt.

[@kylemacdonell1450]

@kurtmayes9986 a few reasons The specs are better for some on the ultra 32" draw Slightly longer ATA Better brace height too The carbon is more dead in hand The carbon is Warmer in cold climate

[@dannygroves6764]

​@@kylemacdonell1450I don't think the hoyt does anything better. It's so funny how a big name and all the popular people have bought them and have to take up for their mistake. Maybe you think the hoyt is all that. I've owned several and sold them. I now shoot the PSE Carbon Air Stealth EC cam 29 in draw, 425 grain arrow 295 fps.

[@CryptoHuntinDad]

Can you guys review the PSE mock 35?DS not 1 person on KZbin has reviewed that bow.And I'm wanting to know the speeds at 28 inches.And the full draw stability brace hide the twenty eight inches

[@j.s.3414]

Really like my 34 with the S2...I enjoy shooting my buddies Rx7, but to me the PSE's are more pleasant to shoot...not to mention the PSE carbon risers look like a stealth fighter jet. Hoyt can keep the rear pregnancy bump.

[@parkerlipetzky]

Would you rather shoot the easy pulling hoyt or pse with ec2 cam at 80lbs.... or pse with the stiff pulling s2 cam at 70lbs?????????

[@GlenKimpton]

I've been wandering the same thing. Not necessarily 80lb vs 70lb. But an ec2 cam wound up to match the speed of an s2 cam on 70lb.. might only be 70lb S2 and 76lb EC2?

[@brandonmude7734]

Great video fellas!

[@extremeoutfitters]

Thanks Brandon!

[@blackheartsmarine0351]

Trying to get back into bow hunting after over 10 years of not doing it. So many changes and choices these days. I have no clue where to start 😂

[@reedjack6564]

I judt had the same experience after almost 20 years not shooting. Got a hot rx7 off ebay and really like it thus far. So many changes and things to consider in that time.

[@traviswarren394]

Wish I knew of a bow shop like this in Marietta ga any suggestions?

[@suzgabverdugo933]

Little man reached down and handled that little stubby removal like he’s done it before 😂

[@wcwcgarner2717]

I use the hamskea epsilon rest made for mathews on my v3x 29. I love it.

[@austingager]

Would love to see one of these bows versus the Revex

[@justinbailey9628]

Where’s the 80 pounders? Lol

[@johnstanford1103]

any particular reason yall tie to the cable instead of the limb?

[@wisemechanic1758]

What’s the difference in Mach 34 and levitate gen 2?

[@extremeoutfitters]

Mach 34 is 34" ATA Levitate is 32" ATA. The new Levitate has the EZ 220 shims and is drilled for the COR

[@jokostel]

Have an Rx7 and a Mach 34... only 27.5 in draw, but they are both solid rigs around 72lbs

[@extremeoutfitters]

Killer bows!

[@tyronechatley5429]

What speed at 450 to 500 grain

[@anthonylubic]

Interesting…thanks for sharing guys 👍🏻

[@dannygroves6764]

Ok ive got the 2019 carbon Air Stealth EC cam. What im wanting to know is are the S2 cams compatible with my bow?

[@goelzprogram]

Great video! About how many fps would you gain with 80 lb limbs at 28" DL?

[@jordanpowell228]

About 15 fps

[@deanmoloney5059]

The speeds of the rx7 ultra and pse mach 34 with s2 shot exactly the same at 70# 30" & 350 grain arrow 324 fps that's impressive

[@tonypetrie6275]

Good video. Nice comparison

[@muleybuckco]

Shot them all, thought the pse sucked, to me the draw was harsh, and the cams creaking is a joke at that level, The RX7 was as expected from Hoyt top notch, I'm a mathews phase 4 shooter and have zero brand loyalty, I shoot what feels the best to me

[@brucehillbillybarthalow3786]

P.S.E.have been leading in the speed department for few years now. Great Video

[@dannygroves6764]

Your right. But really its been for years, they always lead in performance it seems. I don't understand all the guys writing in saying I shoot 80 pounds. 400 grain arrow 29 in draw and 280 fps Wow that's terrible. Your killin your shoulder for any kind of speed I shoot a PSE Carbon Air Stealth 64 pounds 29 in draw, 425 grain arrow 295 fps at 64 pounds. You just can't beat that in my book. I've owned several hoyts and sold all of them. I own the PSE and 2 Matthew's now, I'm good. I'm be looking for another PSE Carbon bow eventually. Take care.

[@oscarhoselton9823]

The said the PSE out performed the Hoyt. But only at the heaviest weights. Hoyt won in smoothness, quiet, and the middle weight arrows tied for 324 with IBO

[@nickkonesky3411]

One thing yall should have checked is that with the S2 cam the IBO speed is 340 not 335 an I think yall could have done better talking about how the weight difference between hoyt an pse will effect how the shot feels in the hand

[@Vintage-406]

I went from a short ass V3 27 shooting 75lbs to the Mach 34 with the S cam shooting 80 and DAMNNN! Let me tell you, you feel every bit of 80lbs on the PSE. 😂😂. I like the trade off longer axle/axle and it feels so much better and stable. I had my Mathew’s weighted up with a front bar, back bar…. the PSE with that long axle/axle is stable. I wonder what’s going on with speeds at 30” draw tho? Normally PSE the only ones who are honest about it

[@ruebendelvecchio811]

602gr arrow came out the hoyt at 251fps, but when comparing it to the first PSE, you said the hoyt was 244. 😉

[@CryptoHuntinDad]

I can't. Believe how much quieter the p. SE, is and it's fasir.

[@mastermetalshredder]

Nice work guys

[@bigrainbow25]

What the hell PSE Mach 34 with the E2 cam is the one you want to test for Speed... it has a draw length of 29 to 33... I'm shooting of 418 grain Arrow at 300 ft per second at 62 lb... the Evolve cam and the S2 cam are the slowest of there 3 offerings... looks to me like you just wanted the Hoyt to be close to win this... you can tell by the big Hoyt Banner in the background... go get a 34 with the E2 Cam and do this again boys... oh yeah and the brace height on the E2 is over 7 in...

[@adrianwhite277]

That hoyt is noticeably quieter than the PSE bows.

[@dannygroves6764]

I thought they were close, with the PSE being a little quieter.

[@brad4010]

Hoyt RX7 Ultra Results: 602 gr @ 28" - 227 fps 602 gr @ 30" - 251 fps 522 gr @ 28" - 244 fps 522 gr @ 30" - 269 fps 453 gr @ 28" - 260 fps 453 gr @ 30" - 286 fps 350 gr @ 28" - 293 fps 350 gr @ 30" - 324 fps PSE Mach 34 (EC Cam) Results: 602 gr @ 28" - 229 fps 602 gr @ 30" - 247 fps 522 gr @ 28" - 248 fps 522 gr @ 30" - 264 fps 453 gr @ 28" - 265 fps 453 gr @ 30" - 281 fps 350 gr @ 28" - 299 fps 350 gr @ 30" - 318 fps PSE Mach 34 (S2 Cam) Results: 602 gr @ 28" - 242 fps 602 gr @ 30" - 258 fps 522 gr @ 28" - 259 fps 522 gr @ 30" - 275 fps 453 gr @ 28" - 277 fps 453 gr @ 30" - 284 fps 350 gr @ 28" - 314 fps 350 gr @ 30" - 324 fps

[@Life-of-Bluegrass_Music]

Some bows come in A Pound to 3 - 4 pounds on average heavy. When you lower the poundage, you're increasing the draw length 1/4 - 1/2. So what's the trade off on speeds, in more poundage and a little more DL? Why even back it down. I know people would bitch it's unfair.

[@rickystauffer9003]

Is there anyway to tell if one is more resistant to torque than the other?

[@codycreager4428]

Yeah go with the longest brace hight

[@thomasroberts1408]

I put Hoyt Go-Stix on my PSE. Works just fine.

[@rickyherbold785]

How did you mount them?

[@jordanpowell228]

@@rickyherbold785 wondering the same thing

[@wrobo6122]

Where’s Bowtech’s Carbon One, you need to put that bow into the mix!

[@j.s.3414]

They keep blowing up.

[@WesternNyBigfoot]

Do carbon 1 vs carbon era

[@ethonaivy]

Pls fix your fluorescent lights lol that constant buzzing kills me

[@extremeoutfitters]

Lol Us too

[@ryanoneil6747]

The s2 on 80% takes out most of the dump in the draw

[@hamedizzy5137]

Pse for sure !!!

[@jimbob7332]

why do you hate the higher let of?

[@extremeoutfitters]

Just personally don’t like the dump at the end of the draw cycle.

[@troybengel691]

why wouldn't you shoot all of them at 85%?

[@petermorphett]

Fix the buzz in your fluro lights, the buzz must drive you nuts working with that all day! Its annoying as hell to listen too in all your videos.. Oh what where you doing again, i forgot...

[@CamArmstrong-sl5vn]

Dan Jasa. Pronounced yasa. not jaza. lol.

[@CamArmstrong-sl5vn]

My mach 34 E2 cam 62lb 31.5'' draw 310gr arrow......341fps. See ya Hoyt.

[@muddog2159]

Open a barbershop in the bow shop brings more customers

[@Pariscj]

Throw that carbon one and era in there

[@DakotaHunt127]

One of these carbon risers is made in USA and the other made in China. Why is the Chinese riser bow $200 more expensive? That’s just greedy.

[@americanbigfoot7881]

You need to stop listening to old geezers on forums 😂

[@spindrift2719]

It’s that PSE is hallow .. look into their process of being made .

[@toreyyoung1518]

Way overpriced vs. super freaking HELL No!! Overpriced!!

[@Waapitii]

I’m not a carbon bow advocate but it’s an expensive product in general, not over priced. Top of the line carbon bicycles exceed $10k, carbon cars; $1M. Anything and everything you want made of carbon will be a big price hike over its metal counterpart.

[@YouTubesucks..]

@@Waapitii your logic is flawed….

[@YouTubesucks..]

Just put some jelly on it and it’s fine…yeah if I’m paying those prices I shouldn’t have to do that ……🤦‍♂️

[@Waapitii]

@@KZbinsucks.. How? Name one product that’s not more expensive when it’s made of carbon? Much more labor and time involved and about 30x as expensive per pound wholesale.

[@all4freedom100]

Beard guy needs to drop mustache guy. Mustache guy guesses at everything and is wrong and offers nothing in technical terms.

[@sticks7971]

Super slow!!!!

[@tylerfuller7174]

Wank the Hoyt why don’t y’all!😂 try turning the pse to perfect 70 lbs and still out shoots the hoyt.

[@jerryacuna8730]

Someone needs a shave....

[@KSN2019]

Hoyt still can’t get their carbon bows right.

[@kylemacdonell1450]

why is that ?

[@elimarshbank5704]

If you shoot one. That sentence will never come out of your fingers or mouth again 😂

[@JC4blade]

😂😂😂