Рет қаралды 9,259
This video goes over the build process and transformation from a Northern Tool Ironton 5x8 Trailer-in-a-box to an ATV hauler that will look good going down the road. This is also relevant to building a 5x8 utility trailer since all of the mods are what you would do when building an ATV trailer. I added 14 gauge steel tread plate floors and upgraded to 15" wheels which adds ground clearance and helps handle rougher terrain. This required 3/8" wheel spacers and larger fenders with inner steel plates. I also added D-rings and built dual fold up ramps using expanded metal and weld on gate hinges. Finally, I added rear leveling jacks to help with stability when loading and unloading the ATV. I topped it all off with two coats of Herculiner spray-in truck bedliner.
Mods:
• 14 GA Tread Plate Floor
• Tread Plate Floor on Trailer Tongue
• Weld-on D-rings
• Expanded Metal Ramps 3/4" #9
• Larger 15" Wheels and Tires
• Larger Fenders
• Levelling Jacks
• Herculiner Spray Bedliner
• Shrink-tube trailer wiring
#trailer #welding #fabrication
Chapters:
00:00 Intro / Talking about the trailer and mods
04:18 Flipping bolts
04:30 Placing the tread plate / mocking up
06:05 Going through plans
06:57 Fitting 15" wheels
09:28 Testing steel floor, planning how to support it
10:16 Cutting notches in floor / grinding paint off frame
11:14 Welding tread plate to frame
16:14 To be continued...
This is also applicable to a Northern Tool Trailer Assembly or Harbor Freight Trailer Assembly.