1961 Parkwood Wagon Suspension UPGRADES! Custom arms, disc brakes, and more!

[@rmarkc]

I will pay attention...to Puddin's bald spot. I will pay attention...to Puddin's bald spot. 😁

[@PuddinsFabShop]

😂😂😂

[@joeyfaulks]

​​@@PuddinsFabShop when I started watching your videos you only had 50,000 subs keep it up good job love the mini trucks I got a 82 Datsun pickup

[@brightty76]

😱🤪🤣🤣

[@devinmichaels6822]

Good job puddin tang. Cars coming along . Shagon wagon. Is nagon! .getur dun.

[@loviedebiasio8864]

🤣🤣🤣

[@timhicks1118]

Bills always very knowledgeable and humble. Also great to see him from time to time. 👍

[@jtsgmc1990]

Absolutely loved Bill’s thumbs up

[@cadman10000]

It's Puddin' time!

[@Robby4Jesus]

Ohhhhhhhhh!!!! Who works in a shop with a big cracked floor? Puddin' pops Fab Shop!!!

[@Peace-Love-Hope-Faith]

^I thought this was supposed to be a SpongeBob reference but i couldn’t make it work

[@ridiculousross5665]

​@@Peace-Love-Hope-Faith 🤣 me too! I tried! 😆

[@quinspruell2630]

Ahmen brother.

[@devinmichaels6822]

Puddin tang time.

[@fillg]

That's hilarious that the only thing you could think to say about Sleeperdude is "quit being such a nice guy". 😎 You 2 are my favorite car work channels

[@Sleeperdude]

Just when I was getting ready to fight he said that.

[@junek8031]

​@@Sleeperdude and that right there is why I came to the comments😂😂

[@fillg]

@@Sleeperdude If you're gonna fight Puddin, you might want to bring Granny Goat along as some backup. 🤣

[@mocreekin6976]

@@Sleeperdude wordonda street tharsabena flip-flop broke off insum butts before

[@billwilliamson9842]

@@fillg yep Puddins walked over bigger and badder just to get to a good fight lol

[@doncox2146]

Puddin, you said Sleeperdude AND big butt in the same video. My day is made. Sleeperdude IS a seriously nice guy. He is another one of my channels I have watched for EVER..

[@johncarella1836]

Yes sir!!! Let’s Go!!! Favorite thing about Mondays!!!!!!!!!!

[@garysommerfeld4668]

The only good thing about Monday’s just dropped on KZbin. Thanks Puddin

[@garysommerfeld4668]

SleeperDude collaboration? That would be nice.

[@marcybatten1017]

Lock Washa, Lock Washa.... Reminded Me Of Family Guy's Rock Lobsta, Love The Channels 1 and 2, We Never Miss An Episode On Either Channel!!!!

[@slotterhauze]

Remember to loosen the control arm bushing bolts and get the car to at ride hight then tighten them. Or your bushings won't last long being in constant tension.

[@chrislambert2889]

Huge congrats on 200 k subscribers 🎉

[@RealSteelFabrications]

There’s no other channel I want to see succeed more than yours Puddin! Super honest dude that does it his way and doesn’t fudge anything. Enjoyed the video as usual. The wagon is really coming along nicely. Been keeping up on the 2nd channel as well, enjoy the randomness.

[@rumah7775]

Oh Puddin, your show always bring me a smile, thank you. Sugar you’ll always do sketchie thing cause your Mama didn’t raise no punk. 😂😂wait til you watch your grand children and great grands. Meeting my great grand this weekend. God bless you and yours.

[@francisrizzo1529]

love me some long roof love, can never go wrong with a wagon...

[@geraldharkness8830]

excellent fabrication puddin!

[@cheekkeith74]

I always used a hockey puck for pounding wheel seals in. Just throwing that out there... Go Puddin'!

[@Leo-vf3py]

Great shows keep up the good work be safe my friend

[@larryd.214]

Things are looking good Puddin'!

[@edsmith150]

Man I do love this wagon

[@choppermike5162]

I can't stop staring at that triple deuce manifold!!!

[@loose-arrow-garage]

Yeah, Sleeperdude is just too nice and wholesome. Puddin, maybe you ought to get yourself a farm animal in your videos! And congratulations on reaching 200K subs!

[@PrestonCovell]

Puddin is more a mongoose type creature. A goat would drive him crazy.

[@66skate]

Both of them need a fire extinguisher in the garage. In one of Sleeperdude's videos, he was working on the diff of a vehicle and had the fuel tank on the floor. It still had some gas in it and his kids were sitting on it. Somehow, he managed to set the diff on fire. He threw water on it and that made it worse. He spent over a minute trying find something to put the fire out. After that was over, he was lowering the vehicle from the jack and came close to pinning a puppy under the wheel. Good thing the puppy sidestepped. Sleeperdude worked in a professional shop and should know better than not have a fire extinguisher handy.

[@bman182]

Great Job So Far

[@chadbrown1474]

Pretty sure the ball joints drop through the hole so the plate is on top. At least that's the way all the ones I've ever done have been. Great episode!

[@chadbrown1474]

@George right now the entire upper control arm is relying on the integrity of 3 5/16 bolts. If the plate was on top, there would be no way the spindle and control arm could seperate unless the ball joint broke. They aren't installed correctly

[@shawnl8567]

Liked and reply to hopefully keep this toward the top.

[@corey6393]

I think you're right. I have only done the job a few times myself, but something looked off with that install. 34:43 shows it installed.

[@PeterHatch-mx7zc]

Utubes we all could all throw in for a cnc cutting table !!!

[@christophermorin9036]

Ahhhh, so THAT'S what that part was! Nice seeing you again Sir Puddin!

[@jonboy9912]

Another piece of mechanical entertainment - thanks old boy!

[@Anthony-rp6yp]

This thing going to be around for another 100 plus years 💯😁

[@jeremyTallen1]

Sleeperdude = Nicest Guy Ever

[@tkbauto9004]

The best channel on KZbin guaranteed ... finally got me a puddin hat and I love it

[@Jbzy3000]

You made it look easy😂. We know it isn’t easy at all. Good week.

[@Rollormotor]

Another great PFS wagon build, Here we go

[@plasticgod09]

The Naggin Wagon is coming along nicely!

[@highwaymy-way4700]

Put those bushings in the freezer for a few hours. It really does help a lot! Good video. Keep up the good work. I look forward to Mondays and Thursdays checking out what you're up to..

[@grantkoeller8911]

You should make custom lawn mower blades~!!

[@willhowell7688]

think i'd add a oil cooler to that 700R4.

[@h20base]

Man, it sure looked good to see some assembly on the wagon.Yes I am learning,yes I pay attention, but no I dont have one to put together myself. Someday maybe. See ya later.

[@alithemagicbum]

I enjoyed the rattle cans and the slick fifty on that tailgate, the patina king. You rule my friend! AND I'LL PAY ATTENTION lol

[@americathebeautiful513]

Goood ole Arts and Crafts with Puddin

[@richardallen1629]

Definitely pack bearings by hand that way and never a problem, but wow those cotter pin holes! I would get some more fat bearing washers to bring the castle nut up so the pin is in shear. The way it is, it can twist out real easy and scares me, but I have been known to over think things... 🤔.

[@Jason1975ism]

My comment was similar. Those castle nuts are going to work loose and you know the rest. No bueno.

[@Jason1975ism]

@@jameschoreboy2540 he doesn't read comments.

[@Jason1975ism]

@@jameschoreboy2540 a Karen? How is being concerned about the safety of a person and his investment make someone a Karen? I used to build Colter springs for Clark. The castle nut is important to get right. If it's loose it works itself off, the bearings get ruined. If it's tight it binds up and melts the grease and the bearings get ruined. Something isn't right with the spindle or the nut and it's not going work long term.

[@RussellRobinson971]

Time for a Puddin-Sleeperdude collab. Love both channels

[@mechanicmike1236]

Hey Puddin’, looks good! I believe the upper ball joints drop thru the control arm not bolted to the bottom, at least that’s how I was shown, just in case the bolts would break the ball joint would still be held by the control arm.

[@MaxNafeHorsemanship]

I might be a Ferd guy, but every Chevy I have owned or seen is as you say. The top goes in from the top.

[@markgriffin4888]

You are both correct. At present, if those bolts break, the spring tension will force the control arm to be separated from the ball joint which will then have the spindle without any upper support. NO MORE PUDDIN That's why with the ball joint on the outside, if the bolt breaks, the spring tension would force the upper arm against the upper ball joint, and you probably would be none the wiser that anything had happened. LET'S HOPE HE READS THESE COMMENTS

[@markgriffin4888]

There is always an exception to the rule, walking past my 94 2wd hilux chassis i noticed that the top ball joint is UNDER the upper control arm. Just wondering if it's got anything to do with it being a torsion bar suspension??? Checked the manufacturers manual, and the drawing shows that it is correct.

[@keairasalmaso5127]

So keen to see a pudin video after a very shit day cheers mate from Australia 🇦🇺

[@Mr49Studebaker]

Love the wagon content

[@BaileysDad369]

Lookin goodin puddin!!!

[@pdrphil8159]

Cant wait to see the wagon come together... And the 59 Int'l... Good stuff P'dog.

[@HFG]

She's looking great!!!

[@bensymington5550]

Love your videos❤❤❤❤❤ awesome content

[@sheldonbenson4510]

Monday night and puddintime love watching you creating the different Pat's of the wagon and I still love your sense of humor

[@twistedkidmotorsports9093]

Those bolts look expertly catalog good job

[@donmunro7568]

I'd love to see puddin and sleeperdude doing a will it run or anything.

[@junek8031]

Yesssss!!!

[@thechillhacker]

The redneck engineering would be amazing. Definitely both men of my same breed.

[@JW-hv8uo]

Me too

[@keithreilly386]

Old wagon call it the James dean machine sweet old ride

[@Bubs-ff8rl]

You know it’s a good day when the puddins merch you ordered come in AND a new video is out 😎 I look up to you puddin, keep up the great work!

[@ynwa0958]

If you need to clean up a thread without a tap, get an old bolt and grind 3 flutes into it. Will clean up old internal threads really well.

[@Blindbat1337]

Just FYI with cameras, Puddin, you can buy the front lense covers. They twist on/off in case you break one!

[@ChipBallentine]

Puddin needs a Netflix series!

[@georgem9554]

I'm loving the wagon build. Going to be a awesome car when you are finished.

[@bustinbass78]

Someone get that man a press Fer those bushins. Like that dimple press or even a c clamp.

[@tombrenes2411]

Awesome content Great build series Love all the hard work

[@jeffreystarmer3084]

wow you look so much better in 720 p

[@lorenmeyer5290]

AWESOME job Puddin WOW that looks so nice! Love watching all the progress your making on the wagon!

[@PeterHatch-mx7zc]

Looking good!!!

[@wwolfe07]

Great video as always sir. I try to never miss a video on either channel. Keep up the good work. 👍

[@waynespears5664]

Love watching puddin throw down,once again he out done himself...............................................Fort Worth,Tx

[@kennethsonier1766]

The chassis is coming together nicely. Any progress is progress. Keep up the great work 👍✌️🇺🇲

[@jjryansea]

The hardest and best parts of parenting are the same. Your children grow up. Nice to hear a father longing for the fading youth of his child. That is love.

[@Highlordratick]

I have always found hand-packing bearings works best for me, gives you control that way.

[@derickfleming7880]

Puddin a real 1. Can't lie you came out of nowhere. Inspired by your success.

[@jjmac3561]

You shouldn't tighten the suspension bushes until you have the full weight of the car on them and they are settled in their normal running positions. Otherwise they will be in tension and torsion and will rip themselves apart far sooner.

[@ruberube540]

It is always nice to see puddin pop

[@Rev.Clarence]

I can completely relate to the curly blonde hair, growin up thing. My little girl grew up to be 39 and passed away from a massive heart attack 💔 😢. I will always love and miss her 💔

[@soggeybottomboystv3848]

Keep it real real good

[@smileysun9212]

Bill covering his eyes was funny. Like he’s covering his eyes from Puddin showering but we know it’s from welding sparks. If Puddin was showering Bill might take a looksey to see that shinny hinny.☺️

[@sourshoes6768]

Love the Sleeperdude shoutout!!

[@shanethompson7543]

Awesome video

[@wolfgangricky]

Funny you Shoutout Sleeperdude. You 2 have much in common. Mostly as Fine Family Men. Both raising a family with KZbin, & completely yourselves. Nothing phony about either of ya. Ty for taking us along

[@mdouglaswray]

That frame looks GREAT! Might not be fancy, but it's MINT again. Wish I had the money to commission a Nomad rebuild a la Puddin' !!!!! Dreamin.

[@johnfugate3432]

The sleeper dude will enjoy the shout out good video as always enjoyed it thanks

[@Rev.Clarence]

I can relate to the curly blonde hair little girl thing. My little blonde hair girl grew up to be 39 and recently passed away from a massive heart attack 💔. I love and miss her greatly 😢.

[@bumboclat]

For every viewer who did not grow up in Oklahoma, let alone from outside the US, you are in fact very much a vocal performer.

[@scottmmagby7057]

Well ok Rattle-can Dan. I will pay attention. Because the humor is flying all over the place!! Love it!!

[@corydriver7634]

You know Mortske will get all kinds of sound bites from this one. Congratulations on smok’n past 200k.

[@tomtribur458]

That’s how I learned to pack wheel bearings 37 years ago in my high school auto shop class, haven’t had 1 fail yet.

[@jonathonreborn2724]

You absolutely need to go fast next! Let's do it. That wagon would make Steve Morris jealous with the right setup going down a 1/4 mile drag.

[@kevincorbin6273]

Yeahhh it’s Puddin time!

[@kristopherboice197]

Love me some Sleeperdude!! How about a super-collab with you, Mortske and the dude?!?

[@cyriously_nick2191]

Puddin man, we need to have a talk about your camera lens cleanliness….

[@MichaelShea1965]

It’s great to see that my two of my favorite KZbinrs are giving shoutouts to each other. Puddin and Sleeperdude !!

[@Darrin_Wyatt]

Surprisingly enough, the talk about feeling comfortable doing sketchy stuff totally makes sense to a fellow sketchy Condesur. Great video

[@twobeards6714]

My fav fab wild man 👍

[@lauraj.4721]

You and Sleeperdude are my favs!!

[@HaynesJP]

Hot Damn here we go again!!! My merch came in today and a vidja! Best Monday in a long time!

[@codybabb147]

Puddin I could watch you doin anything bro

[@jakemeade7615]

I'd say you are a vocal performer you are a super entertaining talker and your rap was hot fire lol.

[@John-Laird]

I really enjoyed the second channel video about the tailgate.

[@kimkelly-kline3768]

Northerners always call em Hoists...lol Just like Pop or Soda..lol love your channel,say Hey to Slick for me..wish I had his Granada..

[@zracer1099]

Let’s not forget the music video you did Pudd!

[@shaunrobertson9203]

Puddin's Fab Shop is getting so big that when I scroll through the ol' KZbin the main color I'm seeing is Puddin's Fab Shop Blue, NO JOKE

[@stevebrzezinski8480]

That chassis is looking good. Can't wait to see that baby sittin low

[@Greg_Gatsby]

Good content. 👍

[@mikepraed4623]

Don't fret on your kids growing up. Enjoy the ages along the way. Some may be easier to enjoy than others but when you get through them the best is yet to come. I was a young dad...now a proud grandfather watching 2 boys grow like weeds!😊