Puji Max AA/AAA Battery Charger

[@hanskiel1062]

Same here, it was showing 100% in less than half an hour. Knowing full well it takes at least 5 hours to charge the capacity of my batteries. Thank you for sharing your experience. I am from London uk

[@hachiback6018]

Nice to meet you. Yeah this charger was a total disappointment. I just wanted it for a 4 at a time charging function but turns out it cant charge anything right. If i come across something better i will make another video

[@hanskiel1062]

@@hachiback6018 thank you.

[@DerekShewan-g8o]

I bought one of those chargers and I couldn’t make any sense of its working. Flashing red & green lights for quite some time,then all lights stay constant. No instructions or indications as to what’s going on. ??

[@hachiback6018]

Yeah totally disappointed. I ordered another charger hopefully it will be better i will post the video when i get it. This charger doesnt work and probably will damage your batteries especially if you use it for ni-cd

[@doctalemon]

The whole time it was plugged it was at the same temp, but when i unplugged it 5 minutes later it was burning hot while it was unplugged

[@hachiback6018]

Yes I don't recommend this charger at all. It's not worth returning I got a new charger recently that one is working fine

[@uksuperrascal]

HI - I have this charger - Pujimax PJ-N4008 - I bought it because it under charges, Did you know that charging any batteries to100% is bad, Because it shortens the life of any battery, Charging to 70% 80% OR 90% will extend the battery working life 20 to 40% longer depending on the make of battery. Also slow charging Extends Any Battery Working Life. To control the input current for 5V chargers use an 0.5A 6V lamp OR a 12 ohm 1 watt resister, In series with the Pos input, the 12R resister will charge 5V at 0.42A. Yes it takes longer to charge, but saves Money.

[@hachiback6018]

When I checked my batteries after charge I was only able to get about 63 percent life. I am not too concerned about battery life span with my nimh batteries as they are not too costly where I live. But thank you for the feedback hopefully your information can help others interested in the charger

[@uksuperrascal]

@@hachiback6018 I also have the cheep PULJIMAX 2 RED LED -AA-AAA--DUAL 9V PP3 Charger that will only charge AA-AAA if you insert 2 x AA-AAA- at a time, it will not charge a single AA OR AAA, But will charge a single 9V pp3 or 2 pp3's at the same time. most people say it did not work because they only tried it with 1 x AA OR 1 x AAA.

[@gajitechnology7208]

1.5 volt battery can be charged

[@MACYNET323]

2,4V output instead 2.8V, that's why charger batt. only at 30-40% Why developer did this mistake? maybe changing sense resistor can work Considering 20000 pcs sold and still not fixed, lol

[@hachiback6018]

No clue but i retired this charger. I bought a new one i am going to make a video about it in the coming days. Thank you for supporting my channel

[@lo7892]

I bought a pujimax charger for 8 batteries and as soon as it's plugged in it turns red and stays red...never turns green no matter how long you charge. PUJIMAX IS TRASH. Bottom line

[@hachiback6018]

@@lo7892 totally agree

[@gewglesux]

Garbage.... mc 3000... NEVER LOOKED BACK

[@hachiback6018]

Agree