Puking Skeleton DIY! | StewarTV

[@midtenn_life]

I did mine last year also, great set piece. Going to try the water tracing dye you mentioned below this year, I used some I had for my pool, but I had to add a LOT of it to get it to work. I like the idea of dual blacklights also, I have just one in the can and one shining up on the can. I used spray foam on mine to make it look like it was "frothy" and sprayed it green, so the blacklight lights it up pretty good.

[@skinnyskinhead9492]

hell yeah man sick love that

[@liamvr4544]

what about the tubeing could you please say where I can find one?

[@StewarTV]

@liamvr4544 got mine at a hardware store....like lowes, home depot, etc....3/4 inch

[@ericc8908]

Turned out alright

[@StewarTV]

@@ericc8908 thx! For a 1st build ill take it

[@markwilson9654]

Awesome. Can u please give info on the pump you used? Thanks

[@StewarTV]

GROWNEER 550GPH Submersible Pump... www.amazon.com/dp/B07MDBYTLS?ref=ppx_pop_mob_ap_share

[@StewarTV]

Here is a link from Amazon...works great so far!! I just use a pool net to take out bugs and leaves so the pump won't clog

[@markwilson9654]

thank you!@@StewarTV

[@taniadowdle941]

Hi, where did you get the labels on the outside of the bucket? the toxic waste, etc ...

[@StewarTV]

Thx 4 watchin! I found them on Amazon.com...not too spendy, lots of options

[@VWIDMark]

What did you put in the water to make it glow?

[@StewarTV]

Thx for watching! I used green pool dye...here's the link: a.co/d/bZV0WyQ

[@Darkreap666]

Looks great! What wattage are the blacklights?

[@StewarTV]

Onforu 2 Pack 30W LED Black... www.amazon.com/dp/B07GGV5B7R?ref=ppx_pop_mob_ap_share That is the link from when I ordered them on Amazon. 1 would probably work ok, 2 is almost 2 bright IMO. Thx 4 watching!

[@Darkreap666]

Thanks, i have other decor that would use the extra light.

[@stevemacmillan2116]

HI, great job. Can you let me know which green dye you used? Thanks

[@StewarTV]

Green Water Tracing & Leak... www.amazon.com/dp/B00LEM6UOI?ref=ppx_pop_mob_ap_share

[@StewarTV]

Got it from Amazon....a little goes a long way, but looks great during the day or at night with black lights

[@hawaynboy]

Was it all green dye or did you mix with water?

[@StewarTV]

@hawaynboy definitely mixed with water. Once I filled it with water, added a cap full or so of dye...a little goes a long way. I've added a lil extra maybe twice but it holds the green color a long time

[@markwilson9654]

Did you put any other paint on the skeleton or just the green arcylic(sp?)?

[@StewarTV]

Just green acrylic paint....it dried out after a few weeks, so I'll probably add more

[@LeeAnnSchisani]

Thank You for your informative video. I followed it and our version came out great!

[@StewarTV]

@@LeeAnnSchisani sweet!!! Glad it helped out

[@jason3709]

Did you use any special green paint for the drip around the can?

[@StewarTV]

Thx for watching! I used a basic bright green acrylic paint for the outside drip effect. I'd recommend doing it in the grass and not on your driveway lol! This was a fun project, good luck on yours!

[@stevemccue2669]

What size pump you use?

[@StewarTV]

@@stevemccue2669 GROWNEER 550GPH Submersible Pump 30W Ultra Quiet Fountain Water Pump, 2000L/H, with 7.2ft High Lift, 3 Nozzles for Aquarium, Fish Tank, Pond, Hydroponics, Statuary Black a.co/d/54JQXEZ

[@StewarTV]

I looked up what i had ordered on Amazon last year...working again this year too so that's a plus. Works great, if anything I'd maybe buy one level down as it's almost a little too powerful, but works well

[@justinwalterman8681]

Hey man, great job on the prop! What size tubing did you use and where did you get it? You remember roughly how long it was?

[@StewarTV]

It was 3/4 tubing from Menards (Home Depot, Lowes, etc) ....had to cut it to length. I think the shortest they sold it was 6ft. Then I used zip ties to secure it. Was a fairly easy diy.....thx for watchin!