PULLING GATOR ENGINE

[@kihv4342]

i put the nuts and bolts on the ground and kick them around so i never find them

[@averybryant]

Kihv the best strategy i use it too

[@nothanks2994]

Kihv same

[@jacoblord3471]

Great

[@techredneck3046]

Kihv same only acadental

[@chaysedesrosiers1045]

Joboi Holly hell man learn how to spell lol its accidental

[@blake1995]

6:28 "come on quit your mud bogging" 😂😂

[@matthewclark263]

hey Dalton you inspired me to join a robotics team. This year we won the world championship with over 3000 other teams competing. I'm really excited for next year because we are designing and building our own Constantly Variable Transmissions. Also I am a pc enthusiast and would love to watch you build your own pc. P.S. pcpartpicker will be your best friend in specing your pc.

[@geralddeus9840]

matthew clark a

[@bryceausen3502]

matthew clark Congratulations on your win, man!

[@matthewclark263]

Bryce Ausen thx man

[@3DMachines]

Congratulations! I'm having troubles with my computer. Ill have a live stream sometime tomorrow. Hopefully we can get it going! LOL

[@geralddeus9840]

3DMachines

[@mr.h4714]

dalton-your content has been phenomenal the last few weeks or so keep it up man

[@3DMachines]

I sincerely appreciate that! I love positivity. Thank you!

[@bryanwelch2701]

I have been a mechanic for my whole life and I'm 54 I do the same thing with the bolts, nice job Dalton

[@craigkrage2689]

Dalton How about making your videos a little longer.?. I was hoping to see more on the Gator project.

[@ryangeorgi5159]

Keep your panties on and wait for todays update

[@BrowerBandit]

instead of the miss understanding at a Drive thru you should shut off your truck, thats how i figured out my starter is shot...

[@DougyFresh-qt5ei]

Trent Nelson same

[@kevinisam]

That's how my father found out his clutch safety switch was bad

[@aRemter1996]

You shouldn't do that with a diesel though.

[@thewardaddy]

Its not only your neighbours but youre cazy in a good way

[@elijahdalton1183]

So awesome. I love this channel.

[@beta-dirtbiker-3940]

I know a lot about computers! I have built my own and one of my friends computers. I do it as a hobby and I love doing it. I would love to build or help you with building you your computer!

[@cooperaustin4324]

nothing gets the creativity flowing like taking your truck on the back roads

[@axlemarley3082]

I love me a 3DMachines production after work. Thanks for the video Dalton!

[@machineryvids4444]

Hi when are u putting in the new engine

[@peterseifert2693]

for a pc that can render 4K its at least $1.2K. I think we can all agree that 1080p is more than enough tho :) - save some money and replace your hard drive with a solid state drive (SSD for short) - your pc will be really fast xD

[@lukesterne2679]

When working with hydraulics cable tying a washer, with a number stamped on it. onto the hose you took off and where you took it from is a wee trick i use.

[@jacobmccallister6706]

This is the best channel on KZbin BRAAAPPPPPP LIFE

[@lukebrownie8370]

Ben waiting for this video for ages

[@yaseendaoud884]

Luke Brownie its been

[@bensweeney7375]

Luke Brownie my name is Ben

[@Pockits]

it's it's

[@dylans4788]

Ben Sweeney My last name is Sweeney too

[@bensweeney7375]

Col

[@samuelspear6768]

Can't wait to see this come together! Keep up the awesome work!

[@steveinman6842]

I also put nuts back on the studs. sometimes if the bolts have a pattern like head bolts, I press them into a scrap piece of cardboard to keep them in order, and available.

[@bobdude2360]

I'm like you Dalton I put the nuts and bolts back where they came from so when I go to reassemble whatever it is I'm working on goes back together with out guessing where it came from. Good work on the gator it's coming along nicely can't wait to see it done and in action. Well take it easy bro.

[@seberous]

nearly had a heart attack at the start, my headphones were turned up!

[@zackward1527]

keep the vids up man I recently got my bike impounded for taking it out my garage and down the alley you keep my positivity going

[@mooch1441]

Your videos are awesome. You never know what to expect and I like that. Its almost like a surprise each video. Keep doing what your doing! Your content rocks

[@motowens]

Some songs will give me insane inspiration and just unload the creative brain juices, that's how I come up with so many of my own vids

[@slammedncammed9657]

I was burned badly when my garage burned down, 3dmachines keeps me going!!

[@brianjames3960]

3d machines you are awesome you got me in to welding I never knew I was good at it

[@TheEricstaehlin321]

I nearly had a heart attack when I saw u grab that saw after pulling the gators motor out like I thought u might try to use it to cut something metal on the gator then seen ur plan for the shelf and I was sooooo relieved lol

[@matthayes7732]

Use a tub for your bolts or screws

[@thomasbell6139]

Crippled Squash4 if he was too do that he would have a hard time finding where each one went when putting it back together I have the same issue as I just rebuilt my fourwheeler engine

[@jawgaming2795]

+Thomas Bell I'm in the middle of rebuilding the top end of my dirt bike lol waiting on the the cylinder rings piston and gasgets

[@ChevyMan-sq8sy]

I go into the woods as well. It's really a great place to think and come up with some good ideas.

[@its2stroke]

I still say swapping out the engine in your friends truck would've been the best video. I was looking forward to that but you kicked the guy to the curb.

[@thomasbell6139]

3D machacines is about like I am we both like tinkering with things and making them better great work my dude

[@codypapillon8906]

And a tip I have is to put the bolts that are from the same spot I put them on the ground or a table in the order they came out from

[@weelanddeal]

Dalton seeing that you are going through with the swap even if the motorcycle engine does not work out I'm sure you will swap in something cool . I'm sure you will get it done it's obvious you have the skill to make things happen . I have faith in you .

[@thetwoamigos24]

You should try and come to Nova Scotia we have some awesome trails

[@liamnixon1460]

Hey dalton, you've inspired me to get my own Westwood laser lawnmower and like restore it and stuff yo know. Keep it fly

[@rustynutsgarage_official8537]

I have a 1986 Laser L110, really nice machines when you put chevron tyres on !

[@liamnixon1460]

Lawntractor FrEaK haha, is it tidy like?

[@dominicsedlar9227]

LONGER VIDS! Love them keep them going

[@connorlangston3376]

I just got my knee surgrey for my ACL meniscus and femur two days ago and I feel like garbage but your vids always cheer me up 3Dmachines:)

[@drivanivan]

The only place i can find my creativity is alone in my garage ..then i feel the ideas wash over my brain like the morning tide on a deserted beach

[@Koshunae]

Im a chevy tech and whenever I have to pull large things out of a vehicle, I follow the mantra of 'bag and tag'.

[@DCRacingSkids]

You can put your bolts in organization on carboard

[@jeremyslaughter8431]

I personally HATE it when people modify vehicles with wood.

[@MASincorporated]

Jeremy Slaughter Ikr

[@mavos1211]

Love your relationship with prince he is an amazing dog.

[@250rTriker]

I have several of these 5x4 amt's and ive done an engine swap on one. I bought a predator 420cc engine. It fit nicely, the torque converter fit and the wiring was easy. Used the original amt air filter and exhaust since the predator one goes over the engine making it too tall to fit.

[@tommydunn2060]

just to ask what happen to the three wheeler

[@mattgeorge4218]

How was it getting those seats off? They come off as an assembly right?

[@lukejohn3655]

You're amazing! Love watching your videos

[@Farmerboy-uv4re]

3dmachines when you had rewired the wires to start the gator it has a sensor in the brake you have to hit the brake and then start it my dad has a gator 550

[@zackfarris4527]

Are you guys going to any wnyoa races this year?

[@huntersillars2048]

was your gator made in wisconsin

[@parksey0345]

i usually put back what i can. and when you cant i poke it through a piece of card board in the same pattern as it was taken off. that way it is held in place and is the exact way you took it off

[@coolyou-ev9bi]

3D Machines make longer videos

[@shawnduframe]

what size are the Gator tires?

[@falseprophet4223]

3Dmachines hello! I know a good bit about computer assembly and I think something like a new build for you would be great. The question is what would be your budget for a computer?

[@victoracosta9182]

Bag and tag works great 👍

[@createandbuild1510]

you are the best 3d you have the best change content

[@MarcusNDSS]

i am getting excited everytime you upload a video

[@4-wheelsqueal974]

my method for keeping bolts together is putting them all in a dish. then when I put whatever I'm working on together it takes me a day to find the bolts I need lol

[@Dollarspodcast]

so when you put in the bike motor does that mean you have find a way to shift and clutch or you just going leave it in like 3rd

[@kylemutschelknaus8578]

love the cahnnel please do more with the gator

[@AustinFreemanSoccer]

Hey 3DMachines, can you please make videos that are at least 10 minutes in length or longer please?

[@Isaacisneat]

keep up the good work! love your videos, have a nice day.

[@inkZzClan]

can't wait to see the 1000 in there

[@crispyonionmanman5615]

3dmachines i personally favor put all of my nuts and bolts in the grass and dirt instead of putting them back where they came from.

[@DigBipper188]

the Budweiser horses are Clydesdales. Well remembered Dalton!

[@skipper_mtb6644]

love this channel so much!

[@johnprem2589]

lol outsmart the dog :))) fun vid, loved this one

[@glenkoopman7347]

The gator needs DUALS!!!!

[@nikolaosarvanitopoulos3920]

How are u going to shift???

[@LCOOTS]

I get my inspiration sitting on the shitter. Afterward i feel "froggy fresh"!

[@upsidedowndog1256]

I can't wait to hear the GS. Plans for driving Gator wheels?

[@a.j.sgarage9637]

when doing a restoration. take it peice by peice and always reverse your socket wrench. so if its tightening you forgot somthing

[@dylancarter8774]

use a card board boxes draw the part and place screws where they out on a part of your tearing it down to clean it

[@user-ty8ui2gd8o]

why so braaptastic bro

[@butterpanda2153]

you need to show the dmax some love. would look great with a small lift

[@levipannell771]

Butter Panda or a 14 inch lift

[@Florida_man420]

Levi Pannell 24 on airbags that inflate to 48

[@alexreinkemeyer8563]

I do the same thing with the nuts and bolts and I LOVE YOUR VIDEOS. STAY FROGGY FREASH SND STAY FLY

[@2CANADIANKID]

Altoids tins work great, so does the floor or some unreachable greasy crevice on your project.

[@80shorrorronniepierce67]

Prince was my favorite dogs name when I was growing up, he was a chow that looked like a big orange lion. I miss that dog

[@keithjacobson4493]

Hello, enjoyed the video. I’m looking to electrify my Gator so want to match the electric motor to C-clutch assembly. Do you have the original motor output shaft size? It looks keyed. Any help is appreciated. I can order a new electric with the correct size so I’d like to do so. Thanks!

[@aidentrites5742]

5:00 I drive Aran 5500 and I half to shut it off when I'm in a drive true

[@pman1335]

Catorgirize everything in tackle fishing boxes for your projects and labeled

[@ryancloyed9175]

Dalton what are you going to do with the gator

[@mitchie8974]

AMD Ryzen 1800x makes an incredible, budget friendly 4K rendering monster! Paired with a GTX 1080ti , It'll be a long while before it becomes obsolete. Feel free to PM with questions!

[@garrettmittler1361]

Great Vida Dalton but you should make them longer please 😆😆😆

[@jimparks1098]

Zip lock baggies! Isolate the bolts n stuff for each sub assembly...you can even label the bags.

[@doubledayjs]

Can you list the components? we can comment on recommendations of what you may need to do. Hopefully you went Intel I7 for video editing capabilities and GTX1080 graphics.

[@marioman971]

Well heck if ya wanted to build a computer I could certainly help, already have a pretty good idea of where to start if you're looking to render in 4K. I'm not too far away from Gowanda either. Gator's looking good though!

[@mralexsp1517]

Ive been building computers for a while but ive fallen in love with working on machines and such over the past year cause of your channel. If you need help putting your computer together I'll gladly offer some advice!

[@Tenright77]

With the GS horsepower increase...seems like you may want to consider frame re enforcements and possobly bead locks on the tires.

[@mikeroberge8928]

Hey 3D I would like to reccomend the intel core i7 prossesor

[@HakushiZ]

Hey dalton I've built many computers and definitely could help you pick out parts and give advice on building it and help if needed.

[@henryluke4399]

nice little rascals drop

[@fuzzwack1]

I would remove that back belt clutch,and put the rear sprocket off of the motor cycle on the gator transmission.That would work sweet!!

[@bocksgarage2871]

What I do is when I rebuilt my 1971 skidoo I took like an empty plastic screw case that snaps shut so it can fall and not open up I hope you find this helpfull

[@bocksgarage2871]

Btw I love your videos keep it up

[@ericschauf8404]

Great video and you misspelled the in the description

[@thegoodlife5031]

whats your budget for thew new pc?

[@nohoes2878]

I put the nuts/bolts on a paper towel on my bench or I put them in a plastic bag. I also use a magnetic tray

[@tonyskates6026]

How many for that engine??

[@machinemuscle3383]

what are you doing with the crash test channel.

[@jaydenswiercz1032]

0:02, your neighbors aren't the only ones

[@royalismydaddy3737]

I can't wait till you get yore own garage I feel like so manny thing will happen