Pumping and Carving - Sidewinder vs Major Arc

Questa serie in italiano: • Truck da carving rivol...
Another episode is comingStay tuned and subscribe activating the Bell.
My skate Tours, Bearings and T-shirt: www.Sk8Tpy.com
The Major Arc channel: • Truck da carving rivol...
Follow me on: / skate_therapy
Use the hashtag #Sk8Tpy to join the community: / sk8tpy
t.me/sk8tpy/ we are growing a telegram group to connect skaters and longboarders all around the world

[@DoubleOverhead]

This review was totally awesome! Thanks a lot!

[@NewDesignVinylGraphics]

Man I had Randall rII on my vanguard forever, switched to these today and threw in some venom bushings… I’m blown away

[@SkateTherapy]

great, you put the venom in the sidewinder right? or in the other one. I hate the stock bushing of the sidewinder

[@NewDesignVinylGraphics]

@@SkateTherapy ye put them in the sidewinder II’s, board side, might try them road side and see how it feels

[@terracancerous3659]

Can't wait for this longboard

[@ryankimbrough9597]

Wow, I hope to get my hands on these trucks in the future.

[@Domieboy]

came for the skating stayed for the accent

[@crackin2000]

I gotta try one.

[@MrFreezook]

WOW Awesome !

[@tommeytommey2742]

If you count the pivot point as a king pin; the sidewinder would then have 3. No?

[@Hestaka]

Am I able to put this on my Sector Nine Cape Roundhouse board?

[@fuji8141]

what is the deck in the beginning?

[@narinrattanaborisut1596]

Can i use this trucks with surfskate?

[@elielstarbright]

How is the Major Arc holding up? Do you ride everyday on it? How long have you been riding with them?

[@SkateTherapy]

no issue at all, but this one was the prototipe, now I'm using the definitive from a few months and it feel even better

[@elielstarbright]

@@SkateTherapy I been riding with the Curfboard trucks on my 42 in Loadedboards for over 3 years and love them for pumping and carving but I wear out the Agus bearing in them and they are not easily replaced. He glues all the screws in. These look like the closes to the Curfboards . With the right board and back truck it looks like it could work for pumping and carving without having to put your foot down to kick.

[@SkateTherapy]

@@elielstarbright I'm very curious to see pictures of the curfboard inside, always wondered how long their bearings last, major doesn't have bearings, is very solid material and doesn't wear, at least no so far even doing freestyle. Is similar to curfboard being low in the ground, even lower, but curfboard pump easier, a very turny back truck doesn't help to build speed, but if you are very aggressive in the style you can.

[@elielstarbright]

@@SkateTherapy I waiting on when they are back in stock to get some. Would you like me to send you some pictures of the inside of the one I was able to take apart?

[@elielstarbright]

He said he has made it better on the next batch that is coming in June or July.

[@BikerSupichai]

Sidewinder 2 trucks can work as surf truck? thank you

[@SkateTherapy]

they are very bad for surfskating, too unstable in the back, shitty rebound and they shorten up the tail too much

[@elielstarbright]

If you remove the back truck and replace with a normal truck what does that help in?

[@SkateTherapy]

you get a more stable back truck which help to impulse more power in the pumping when you go faster, the board will have also more grip

[@elielstarbright]

@@SkateTherapy Looking to create another board that is as fun as my Curfboard for pumping and carving.

[@GermanBadGuy]

Gotten suspiciously quiet around those trucks after all the buzz two years ago. What happened? Not holding up to the initial impression?

[@SkateTherapy]

they are still perfect, I just have too many boards and I enjoy more surfskate and dancing. I'm planning some new videos soon as I like them for off road on big wheels as they are fun to slide as I did in some old videos. Recently you can see them in some skate tours

[@GermanBadGuy]

@@SkateTherapy thanks! I thought they were a good middle ground between surfskate and LDP, wouldn't you say?

[@rengo3390]

Are good for a pintail top mount? Thank you i just suscribe 😉

[@SkateTherapy]

yes a pintail is great, I made a video with something similar to a pintail kzbin.info/www/bejne/gJa9gH2Peq5si8k up to the shape of you may need to use risers or not, anyway with risers you increase the pumping potential. Here there is a video mounting it with english subtitles kzbin.info/www/bejne/jWe5hal9rpuMa5I

[@rengo3390]

@@SkateTherapy thank you... I think I will try revange... they are diferent but they are cheaper and I want that surf feeling I also saw your vídeo of waterborne trucks. I am at usa but I need my italian passport,maybe we can ride onde day I don't have instagram do you have a contact? Thank you

[@GuyBucktastik]

Mi skate amigo ! Veritas!

[@functionalmove]

Quando e dove saranno commercializzati i Major Arc?e a che prezzo?

[@SkateTherapy]

faranno dei preordini prossimamente, prezzi ragionevoli, ma inevitabilmente piú cari di un truck standard

[@krishnansrinivasan830]

@@SkateTherapy Can you help us with an online link to buy Major Arc longboards or trucks ?

[@SkateTherapy]

@@krishnansrinivasan830 as soon as it agailable I will post it, they are still arranging their website

[@krishnansrinivasan830]

@@SkateTherapy Thanks Sir :)

[@68644731]

O il mio amico congratulazioni per il video. Ho un sidewinder proprio come il tuo Sand Edge e ti darò una ricetta che ti piacerà ancora di più. Per prima cosa fate un foro per diminuire la distanza tra gli assi nella parte posteriore e se volete anche nella parte anteriore (per farlo incastrare nei fori da una parte e trapanare nell'altra in modo che sia molto dritto) utilizzerete il foro interno per fatene uno in più dentro e si fisserà così sia davanti che dietro (riassumendo farà due fori davanti diminuendo l'interasse davanti e poi due fori per diminuire il dietro. tra asse e si è scoperto ottimo, le mie ruote sono da 66mm e non si agganciano, e cambio le boccole con una 92 ​​del tipo a cono di marca Independent e una boccola più morbida tipo 88 cono e metti così, davanti allo skateboard, la 92 dura sotto Chiudi alla tavola e il più morbido Vicino al suolo e sul retro, fare il contrario del morbido vicino allo skateboard e quello più duro vicino al suolo I truck saranno posizionati sotto lo skateboard e non sopra e lo renderà più reattivo e un po' più alto userete due boccole da 92 e due da 88 (io uso 92 e 95 perché ho 100 kg) e vice mi sembra light country la marca può essere Venom o qualunque cosa tu abbia. Ce ne sono alcuni di Venom che hanno un collo, se funziona, questo sarà ancora meglio penso (c'è una canna con un cono da quello che ho visto)

[@68644731]

Hola amigo felicidades por el video. Yo tengo un sidewinder igualito al tuyo Sand Edge y te voy a dar una receta que te gustará aún más el tuyo. Primero haz un agujero para disminuir la distancia entre ejes en la parte trasera y si quieres en la parte delantera también (para que lo fijes en los agujeros de una parte y taladres en la otra para que quede bien recto) usarás el agujero de dentro para haga uno mas mas adentro y se arreglara asi tanto en la parte delantera como en la trasera (resumen hara dos agujeros en la parte delantera disminuyendo la distancia entre ejes en la parte delantera y despues dos agujeros para disminuir la parte trasera. entre eje y resulto genial mis ruedas son de 66mm y no agarran y cambie los bujes por uno 92 de la marca Independent tipo cono y un buje mas blando tipo 88 cono tambien y ponga asi delante del skate el 92 duro debajo Cerrar a la tabla y el más blando cerca del suelo y en la parte de atrás, haz lo contrario del blando cerca del skate y el más duro cerca del suelo, los ejes se colocarán debajo del skate y no encima y así se hará más receptivo y un poco mas alto usaras dos bushings de 92 y dos de 88 (yo uso 92 y 95 porque tengo 100 kg) y vicio me parece light country la marca puede ser Venom o la que tengas. Hay algunos de Venom que tienen cuello, si funciona, creo que este será aún mejor (hay un barril con un cono por lo que he visto)

[@urbandecay3436]

Translation: Hey man, congrats on the video! I have the same Sidewinder board as you, the Sand Edge, and I have a cool trick to make it even better. First, you need to make a hole in the back of the board to decrease the distance between the wheels. You can also do this in the front by drilling a hole in one part of the board and using the holes in the other part to make sure it's straight. Then, use the inside hole to make another hole deeper, and this will fix both the front and back. This will make your wheels less grippy, and my 66mm wheels work perfectly now. Next, I changed the bushings for Independent brand ones, a 92 cone-shaped one and a softer 88 cone-shaped one. I put the harder one in front of the board and the softer one near the ground. In the back, I did the opposite, with the harder one near the board and the softer one near the ground. This makes the trucks go under the board instead of on top, which makes it more responsive and a bit higher. Finally, I use two bushings of 92 and two of 88, but if you weigh more, you might want to use harder ones. My favorite brand is Venom, but you can use any brand you like. Some Venom bushings have a neck, which works even better than the ones I have. Hope this helps you improve your board!

[@nicolacrespi9298]

Ciao hai mai provato una Hamboard come la Pescadito? Sono curioso di sapere le tue impressioni in termini di surfskate e pumping. Saluti

[@SkateTherapy]

no, ma feci varie tavole con wheelbase corto, onestamente la hamboard mi sembra esagerata come prezzi. Fatti un surfskate o se vuoi il feeling del pescadito prendi un cruiser e mettici dei truck paris ..se poi aggiungi dei riser inclinati lo surclassi al pescadito ;)

[@popeye7833]

Take bigger wheels speed you will increase top speed

[@eBoard3R]

⚡🤙🏼🤙🏼⚡

[@68644731]

Hola amigo, una configuración más que probé es poner un eje invertido normal o uno normal y se convierte en un surfskate y cuando bombeas anda igual o mejor que el Carver (porque tenemos dos bujes para ajustar y encontrar el La mejor manera de montar El Sidewinder Bira es un patín de surf que bombea más fácilmente.Puedes usar la forma Sand Edge con el huracán más pequeño y te gustará la agilidad.

[@68644731]

Sidewinder vai voltar a ser atual . Desta forma

[@itsiqn6951]

Dude I can’t find sidewinders anywhere

[@vanessap8717]

Are those trucks more stable than surfskate trucks?

[@SkateTherapy]

yes they are, but hey aren't much pumpable, they are good for carving and pushing

[@paolomarletto899]

Ciao skatetherapy

[@SkateTherapy]

ciao, come va? 🤙

[@paolomarletto899]

bene grazie anche se qui a Torino fa un freddo.... vorrei venire a Barcellona ma sto cancro covid

[@SkateTherapy]

@@paolomarletto899 ..hai voglia a incazzarsi col covid, se viaggi con lo skate in una zona comoda per spostarsi non é neanche male, puoi stare senza mascherina sin tanto che fai sport e sei lontano dalla gente, per me é la salvezza. Risparmia per la prossima primavera ovunque voglia partire ;)

[@paolomarletto899]

benissimo grazie invece per gli skate tour

[@Ilovelife968]

Italiano? Sento l accento

[@SkateTherapy]

non andrá mai via 🤙

[@cicofolle3068]

Con l'Inglese non ci ho capito niente , ma è stata una figata pazzesca

[@SkateTherapy]

guardali in italiano e risparmiati questo supplizio 🙃 kzbin.info/www/bejne/aaixhqKMfcqaqbM

[@pmacnz]

Just get an electric board with double king pins. Amazing. No more pushing or wiggling or pumping. Speed and carving!

[@SkateTherapy]

I love to use my own energy honestly

[@xx_PCCR_xx]

@@SkateTherapy I was going to say the same! Using your own body to generate motion is one of the best feelings :)