Putting Engine Half Covers On A Custom 5.7L R/T Charger

[@ZJDx3]

Nice set up! Looking great man! Keep the videos rolling, inspiration for all R/T owners!

[@RydinNStyle]

Thanks Zane, we could meet up soon

[@ZJDx3]

Alright sounds good, let me know when’s a good time for you, I need some advice and opinions on my build, just lmk

[@ynrt_5.772]

Nice engine half covers looks awesome nice job....I contacted Steve white they sent me a link to order from with all the "5.7" half covers they have available....going to order them appreciate the vid....subbed 👍👍

[@RydinNStyle]

Awesome, thank you

[@RClerigo1985]

Where can I purchase the half covers

[@derekmorrison1426]

You clearly care a lot about your engine bay, and that's awsome I won't be getting this as I already have a dress up kit but none the less it does look nice!

[@RydinNStyle]

Thanks Derek!

[@BurnseysRT]

Looks great man. I agree about the Volant intake and the stock I take being a good system. Like the way those are doctored up. Good to see a video from ya. Hope all is well.

[@RydinNStyle]

Thank you burnsey's, all is well here on this side of the pond. Hope you're doing well there in that winter wonderland

[@ashvlogz_8049]

You should do voices for a Home Depot commercial or something 😂

[@RydinNStyle]

Haha, maybe I'll look into it 🤔

[@TheRealRickyVirgo]

I'm fuggen dead lol

[@victormmaeztuii5673]

Where did you buy the red stripes?

[@RydinNStyle]

A kit on ebay or Amazon

[@jrseda2217]

Hey bud I bought the same covers for my 2015 Chrysler 300s and my covers fit perfectly flush with a tiny bit of tweaking the diver side I had to grind the front plastic nipple and it all looks factory now 👍🏽 if you have any questions reach out and I’ll tell you what I did to make them a secure fit and factory look ... once again thank you for your video 👍🏽

[@CrunchTyme]

Jr Seda I just ordered my covers. What areas did you have to grind down

[@jrseda2217]

The tab on the front of the drivers side

[@CrunchTyme]

Bumper front? Or firewall front?

[@jrseda2217]

Bumper front

[@jrseda2217]

@@CrunchTyme if you like i can send you pictures or video if you like

[@Zayraw-cv2lj]

I have a JLT intake series 2 on my rt and for some reason my covers won’t fit !

[@ksgarage3734]

Great video by the way.

[@RydinNStyle]

Thank you

[@DSWJoyrideProductions]

Nice man! Good to see you!

[@RydinNStyle]

Thanks, I need to start recording again

[@twistedtuned4273]

where did you buy this at

[@RydinNStyle]

www.stevewhiteparts.com

[@erueda74]

Where did you get those from ?

[@RydinNStyle]

Here's the link on where to go and how to buy them, I got the red decals on Amazon or Ebay kzbin.info/www/bejne/qp2nfWd7qaxphaM

[@TheCory30189]

where did you get your filter from? I am trying to find one in blue?

[@RydinNStyle]

18mm breather filter bought on ebay

[@zacheichelberger4715]

where’d you buy these half covers ? know this videos so old i just got my first charger🤣

[@RydinNStyle]

Check out www.stevewhiteparts.com

[@stephenffryejr6767]

where can i buy the half cover ??

[@RydinNStyle]

Check out www.stevewhiteparts.com

[@guyghopkins7427]

Hey from New Orleans.....We own a 2010 SRT8 Challenger and a 2014 SXT Challenger...any ideas where I can find some goodies for same?

[@RydinNStyle]

Www.stevewhiteparts.com or billetechnology could be a Start. Be careful, it gets addicting lol

[@donpaskaryk4566]

3/4" heater hose will work. A couple dollars a foot.

[@JohnRWhetstine]

This video helped alot! one question, where did you get your oil catch can in front? does it come with the bracket?

[@RydinNStyle]

I got it from billet technologies, the z bracket was an extra cost but necessary with the engine half covers

[@orlandoflores72]

What's up Rydin always looking good.

[@RydinNStyle]

Thanks Orlando, much appreciated brother

[@chuckberrybaby3529]

Instead of using the 18mm crankcase breather will a 12mm work the same?

[@RydinNStyle]

Yes, that should work, it'll just be a bit smaller and possibly more restricted

[@ksgarage3734]

Do you have any idea if these would fit on my 2012 durango 5.7 hemi? Same motor so I'm assuming. Just not sure.

[@RydinNStyle]

I'm thinking the setup is similar. Check out www.stevewhiteparts.com They have different parts for all the different models. I dont want to mislead you.

[@ksgarage3734]

@@RydinNStyle appreciate the response. Thank you

[@infa1v1ous]

New subscriber here, so I have a stock R/T mostly (nothing mechanically done) but if I have and continue to use the stock air intake would the half covers work? I plan on getting a catch soon also

[@RydinNStyle]

Yes, it should work, I regret putting an after market closed box since the stock one is already a closed box

[@infa1v1ous]

@@RydinNStyle awesome thanks man! Loved the video! Very informative and instructional. I want to do the half covers on my 2020 R/T I think it will look great alike yours! And thanks for the speedy reply on such an old video

[@JeepsCafe]

Those half covers look great on your Challenger. Will they work with a Shaker? if so I wonder what problems I would run into during installation.

[@RydinNStyle]

Ooh great question, I'm not sure on the configuration of the shaker

[@JeepsCafe]

@@RydinNStyle same as 5.7 just a big snout on top of engine lol

[@soufianDEMOS]

Hi, What year is your Charger ?

[@RydinNStyle]

2015

[@Low_.345]

So where do we buy it

[@RydinNStyle]

I found it on ebay

[@elijahchavez9740]

Will work for 2017 Dodge Durango r/ t

[@RydinNStyle]

It should, I think the engines are the same

[@whosthisYT]

John Cena called and what's his voice back!

[@dwaxxz]

I love the first cover you had on!! Where did you get it??

[@antonioluna4329]

Car looking good 👍🏼😍😍

[@RydinNStyle]

Thank you

[@57LHemi]

Will these work on a 2006 charger r/t?

[@RydinNStyle]

I'm not 100% sure, check out www.stevewhiteparts.com to see

[@marquisszone8943]

Where did you buy them from

[@RydinNStyle]

www.stevewhiteparts.com

[@scottbuijck6184]

I want to put a sniper hood on my charger but they have all the vent holes open to engine compartment anyone have any suggestions on how to not water damage the engine but still keep the look

[@spawnuvsatan]

did you mean viper hood? If so, I have an aftermarket viper style hood from BMC on my charger and there's no water damage.

[@onefastlife5017]

Hey bro will this work on my 6.1 ?

[@RydinNStyle]

Yes it will

[@onefastlife5017]

Rydin N Style thank you I’ll look in to it , want to spruce up my Jeep

[@chuckberrybaby3529]

Will this fit 2019 hemi engine?

[@RydinNStyle]

Yes it will, I might be selling my engine half covers too

[@chuckberrybaby3529]

I’m about to order some, why are going to sell yours

[@RydinNStyle]

Trading in my car and put the stock cover back on

[@RydinNStyle]

I'm going to make a video soon on how and where to order them from

[@chuckberrybaby3529]

Rydin N Style from Steve white the place in NC

[@blackbeard0074]

You seem like you would be a cop😂

[@RydinNStyle]

Haha, very interesting

[@AreWhyAyeInn]

😂😂😂 or at least military

[@mark006868]

Rydin N Style... Your makeshift breather filter does not "work better"....It was designed to be connected to the airbox...therefore it was designed to work properly under vacuum....The way you now have it set up there is nothing pulling the air out of the engine and it will just slowly clog up ....The smarter option would be to connect it to the new airbox...restoring the vacuum needed to operate the Positive Crankcase Ventilation the way Chrysler (and all other car makers) designed it....

[@RydinNStyle]

Ok

[@marvinquiroz2822]

Nice

[@RydinNStyle]

Thank you sir

[@zakfuji6303]

How’s it going brotha

[@RydinNStyle]

Pretty good bro, there's another local brotha on this comment thread. We gotta schedule a meet up

[@zakfuji6303]

Rydin N Style hell yeah man! Sounds good hope everything’s going well!

[@dadlife7375]

That hose suppose to go in the attachment clearly next to the breather filter you used maybe you knew that and the hose couldn't go in there with the cover on

[@RydinNStyle]

Yes, I put a different air box and the hose wouldnt work with it or the half covers

[@sethreese326]

I cut those pegs off on both of them and it set completely flush.

[@RydinNStyle]

Such a cleaner look

[@ryotaryuu]

YOU SERIOUSLY DON'T SEE THE BREATHER TUBE FITTING COMING OUT OF YOUR CAI? IT'S LITERALLY RIGHT NEXT TO YOUR BREATHER TUBE.

[@RydinNStyle]

Hmmm, did I miss it

[@hammer3921]

Haven't I seen this video posted before? Like three times.

[@RydinNStyle]

I've posted an installation video before, but I get a ton of questions from new viewers/subscribers who havent seen that older video.

[@joejohnson5748]

Can I get it at Dodge

[@RydinNStyle]

The parts department should be able to help you out, but some aren't so helpful. www.stevewhiteparts.com

[@sarahromero7376]

This work Dodge Durango r/t

[@RydinNStyle]

Im.pretty sure it's the same engine components for the R/T or 392, so it should fit

[@sarahromero7376]

@@RydinNStyle finally got it work for my Dodge Durango

[@RydinNStyle]

@@sarahromero7376 are you happy with the new look?

[@sarahromero7376]

@@RydinNStyle yes for being one first do it I can send you picture if I can get email

[@RydinNStyle]

@@sarahromero7376 nice, [e-mail]

[@1CHILOMAN]

I like the original better

[@RydinNStyle]

They both have their appeals

[@cmackinahemi300c]

We’re did you get these?

[@RydinNStyle]

Check out www.stevewhiteparts.com