Brembo on Dodge Challenger R/T. These front brakes are better than the SRT

[@GaryR-lr2qn]

Outstanding work! I have a 2016 Challenger R/T, RWD with Scat Pack package and 4 piston Brembo brakes and want to upgrade to a 6 piston Brembo kit. Brembo tech support said it will not fit. The brackets in this video would help to install the 6 piston Brembo kit? If, yes, I am interested in the blue prints of the brackets. Thank you for your help.

[@_demon1k_]

If you have 4 piston brembo calipers, you don't need adapters because you have SRT knuckles. Just buy 6-piston calipers and hellcat brake disks.

[@christianhardwick6530]

$1340 for rotors.

[@_demon1k_]

@@christianhardwick6530 price depends on the supplier and condition, this price is for new, but you can always buy used in excellent condition for half price or even cheaper. But the point is that the difference in braking is enormous, they are worth their money

[@pushhrodd01]

My friend I just wanted to say that you’re a genius and a very hard worker. Here in the United States where these cars are common you would make a very good living selling this things on the side. Good job on the work. You did great!!

[@_demon1k_]

Thank you for such an appreciation of my work

[@dominikgsell469]

Do u Sell 2 of These Adapters? I have a 2012er r/t, and want 4-6 piston calipers…. But its impossible to get srt knuckle in Germany … if u Sell These Adapters…. Which calipers i will need? Great work btw!❤

[@_demon1k_]

I can sell you a 3D model of the adapter and you make it in your city on any milling or CNC machine. You will need Brembo GT calipers 6 or 8 piston calipers for 380-410mm/34mm brake disk (for today it is the newest model) or any available in your country Brembo calipers with radial mount for such disk, for example from Audi, Porsche, Mercedes or Bmw.

[@dominikgsell469]

@@_demon1k_ what do you want for this? The idea with Porsche calipers Sounds wonderful, i only have to Look what Modell These calipers use (have no idea of Porsche 😌) are the screw holes of all brembo caliper are the same ?

[@_demon1k_]

@@dominikgsell469 For example, calipers like the ones in the photo forums.quattroworld.com/rs4b7/msgs/98644.phtml It is important that they can be installed on large brake disks, because the disk from the hellcat is 390/34mm. It is important that the mounting holes are 200mm and the distance from the holes to the caliper axle is 55mm I used this caliper, its price in Europe is 450 euros a piece www.brembo.com/en/car/sporting-use/gt-braking-systems

[@_demon1k_]

@@dominikgsell469 For 3D model cost, write me on instagram or better yet email me at [e-mail] I will need to understand in what format you will need the model or drawings

[@dominikgsell469]

@@_demon1k_ ok i will thx :-)

[@elt3rror]

I HAVE A 4 piston brembo 2023 charger scatpack Will it fit 2015 charger RT

[@_demon1k_]

No, only using srt steering knuckles.

[@cristianpena8604]

Please explain to me what I need to do mine. Its a 2017 RT. I’d really appreciate it

[@_demon1k_]

The adapter presented in the video is intended for models with non-SRT steering knuckles and rear-wheel drive from 2014. I also have an adapter for models with all-wheel drive, it is different. To install these or similar brakes you will need: - 4, 6 or 8 piston calipers of the Brembo GT series with pad guides and a pressure plate; - brake pads from hellcat (any company you like) - brake discs from hellcat - flexible brake hoses from hellcat or I would recommend reinforced ones from Stoptech or Goodridge - make an adapter according to my 3D model on a milling or CNC machine in any parts manufacturing workshop in your city.

[@BMan100]

Need to get some Rust prevention spray going on there my man. If you plan on keeping it of course, but yeah those 6 Pot Brembos just transform the cars spotting power....Need to get my Brakes done in another week or two pending my mechanic lol.

[@_demon1k_]

Of course, but I plan to make a new set of transition plates with anodizing, without a protective coating the aluminum parts won't live long. Power brakes are probably the best upgrade for the car, I enjoy it every time I drive

[@2rcklssvidz]

My 2019 RT Daytona came with them I thought Daytonas came with brembos but I guess not. Dealer add on when it’s a 5.7?

[@_demon1k_]

Yes, on all v8 you can add the performance brake package as an option and then you have brakes like a hellcat

[@hemi08911]

Man great video. Do yo sell them Caliper adapters i need a pair asap.

[@_demon1k_]

I don’t sell ready-made adapters, I can only sell a 3d model for manufacturing in your city

[@345Jo]

@@_demon1k_how much for the 3d model?

[@_demon1k_]

@@345Jo The cost of the model is 50€=55$=75CA$

[@davidlowe3793]

Can we buy these brackets or did you have them made ? And what caliper is that from scat?

[@_demon1k_]

I can sell 3D model or blueprints to make the adapter. The adapter can be made on any CNC or milling machine in your city. I used new generation Brembo GT series calipers with radial mounts. You can buy them from a Brembo dealer: www.brembo.com/en/car/sporting-use/gt-braking-systems

[@kevindavis5311]

How can I purchase front set?

[@_demon1k_]

You can assemble all the components yourself, if you need help I can tell you what you need to buy. The only problem you may have is making the adapter plate, you need to find a company that makes parts from 3d model

[@kevindavis5311]

Ok great! I have a 2014 Dodge Charger AWD RT with 2018 Hellcat Rotors and Calipers. Everything is slightly off.

[@kevindavis5311]

Seems like 1/4”

[@_demon1k_]

@@kevindavis5311 I take it that you have already bought the hellcat calipers? If so, there will be difficulties with installing them, as the hellcat calipers are attached via side mounts that only fit the SRT knuckles. I'm not sure they will fit on your AWD. Can you take measurements of the knuckle and caliper so I can try to design an adapter plate?

[@kevindavis5311]

@@_demon1k_ if you like u can email me and I can send the Hellcat knuckle and SRT knuckle that I currently am using that will not work for measurements. Once bolted the rotor is touching the caliper

[@JulioHernandez-zx1sv]

I have a Dodge Durango 2015 RT 5.7 V8 and I want to installed the brembo caliper with the bracket where I can buy the same you installed in the video. My car is a rear traction . Thank you

[@_demon1k_]

I need to understand what kind of steering knuckle is used on your car, if the same as on a rear wheel drive Challenger or Charger then my adapter will work for you and I can sell you a 3d model or drawings for fabrication. If you are using a different knuckle then you will need to design a different adapter, but I don't have data on the Durango range of knuckles at this time.

[@JulioHernandez-zx1sv]

I have a charger 6 Piston front caliper for my Dodge Durango RT V8 2015 5.7 and my knuckle number is PSA46700. I want to adapt that brembo calipers to my Durango you think that is possible. Thank you for your help.

[@_demon1k_]

@@JulioHernandez-zx1sv There is not much place to mount the hellcat caliper to the steering knuckle via an adapter, as the hellcat caliper is laterally mounted to the steering knuckle . So I used a caliper with a radial mount so that an adapter of sufficient strength could be made. In your case, it would be easiest to mount the caliper without an adapter to the steering knuckle and use a two-piece brake disc like on a Charger or Challenger Hellcat, but fabricate a new center section to fit the required caliper outreach. I think that would be the easiest way to install these calipers.

[@Shawnie_sama]

So i have a 2015 rt i want to do a conversion like this what’s the disk that you say infront of the rotor and where can i get the bracket adapters like that so i can fit the front calipers on?

[@_demon1k_]

To install such a set you need: front brake disc from Hellcat 390/34mm, brake calipers Brembo GT series with guides and shoe stop plate, pads from Hellcat, brake hoses to the caliper from Hellcat or 392 and the adapter plate. You can't buy a ready made plate right now. I can only help with a 3D model or drawing for you to make it in your country on a milling machine or CNC machine

[@tnbmazzi1721]

How much to send it to America ?? And if so where can I get in contact

[@_demon1k_]

@tnbmazzi1721, I don’t sell ready-made adapters, I can only sell a 3d model for manufacturing in your city

[@ZukoThePyroRaptor]

@@_demon1k_hey where do I get the 3D model? Because it’s not on your instagram

[@_demon1k_]

@ To contact me, email me at

[@jordanking2488]

Sir how much do you charge for this bracket??? I can’t justify spending I shit ton spindles

[@_demon1k_]

Right now I'm only selling 3D models for making adapters for GT series brembo calipers or similar radial mount calipers. The price and how you can buy a model in any convenient format for you I can send you in private messages in instagram. The price of making the adapter depends on the price of material and the price of work in your city - usually it is 100-300$

[@KamGlobaI]

What I need for my 8 pistons breaks I have a 2023 challenger rt

[@_demon1k_]

If these calipers have a radial mount and the same parameters from the mount to the center of the caliper, adapter will definitely work for you

[@KamGlobaI]

@@_demon1k_ I’m sorry about that I meant 6 pistons and I have the rotors that goes with them and break line

[@_demon1k_]

@@KamGlobaI If you're talking about the 6 piston hellcat calipers you only need the srt steering knuckles, otherwise you can't install them, there is no adapter for those calipers

[@ZukoThePyroRaptor]

Hey where is the link to the 3D model I want to buy it and I have new brakes coming in, I’ve looked at your description and your instagram and there’s nothing? Please get back to me when u can because it’s this or buying new steering knuckles

[@_demon1k_]

@@ZukoThePyroRaptor Write me at my e-mail [e-mail]

[@ZukoThePyroRaptor]

@@_demon1k_ kk

[@ZukoThePyroRaptor]

@@_demon1k_ sent

[@aldotrinidad]

Hey I just bought 4 piston brembos for my 2019 dodge charger RT what else do I need to install ?

[@_demon1k_]

What kind of 4-piston calipers did you buy? If from the 392 version, then also the steering knuckles srt, brake rotors and hoses for this set

[@靡靡之音-y2i]

@@_demon1k_hey there i also got brembo gt series 4 with 14 inch 2 pieces cross drilled rotors. is this gone be a drop in installation or i need other stuff

[@_demon1k_]

@@靡靡之音-y2i This adapter will fit a 4-piston caliper but it needs to be modified for a 14" brake disk because it is designed for 390mm (15.35") and the thickness of the disk is also important.

[@Edof37]

Hi , it’s possible contact with you for this thing but just for the 4 piston calipers??

[@_demon1k_]

Hi, send me a message on instagram and attach a photo of the calipers you want to install

[@nicksmith2604]

only site ik that sells these are for 600 front 600 in the back

[@_demon1k_]

Brembo GT series in Ukraine at the official suppliers costs $ 600 for one caliper without pads, guide pads and pressure plate. Since this series of brakes is relatively new on the sites are sold only sets with brake discs, hoses, pads, etc. at a price of 7k-8k$. But kits for Challenger have maximum 380mm brake disc and unreasonably expensive price. You need to order calipers, pad guides and pad pressure plates as spare parts from an official representative or dealer in your country, then the price will be adequate. Also it is not necessary to use this series of calipers, you can choose almost any brembo caliper suitable for brake discs 390mm and more. All prices are for new parts, if you buy used, the price will be much cheaper

[@CrazyBigLuu]

I just bought the srt-8 4 piston set up for my 2015 rt Would you by chance know the measurements for that ? Because I’ve been looking everywhere and cant find a bracket system for them

[@_demon1k_]

Yes, I know this brake system, it's called BR4 with good brake calipers but weak brake discs, they are 360/32mm. You will need SRT rotary knuckles to install them, as these calipers have "ears" for side mounting, and the brake disc diameter is almost the same as the RT brake disc (345/28mm).

[@CrazyBigLuu]

@@_demon1k_ ok so a bracket wouldnt work for me and i actually have to get the knuckles . good to know , do you by chance know what years are compatible , because i think these were from a Chrysler srt-8 and i have the newer 2015 rt not sure if it will be a direct bolt on

[@_demon1k_]

@@CrazyBigLuu The SRT8 knuckles were the same on all models of the Chrysler family (Chrysler 300C, Challenger, Charger) but you only need the SRT knuckles from models manufactured after 2008, the earlier knuckles will not fit your 2015 R/T

[@CastroLTZ71]

So 2008+ srt model spindles work with the 15+ style ? I did not know that.

[@moetaz4298]

hey man, I've been looking for something like this for a long time. Can I please get the bracket file from you? I have a 2015 RT challenger and I am looking to upgrade the front brakes. thanks

[@_demon1k_]

wrote a reply on instagram

[@jason305dallascowboysfan8]

So with this method, you didn’t have to change your knuckle spindle?

[@_demon1k_]

No, I did not change the knuckle, its price compared to making an adapter plate for the caliper with radial mounting is much higher

[@jason305dallascowboysfan8]

@@_demon1k_ are you in the US, do you make and sell them

[@_demon1k_]

@@jason305dallascowboysfan8 Now I am in Ukraine and can not send ready-made adapter plates. If you have the opportunity to make I can help with drawings or 3D model

[@jason305dallascowboysfan8]

@@_demon1k_ ok. Man you can make lots of money if you was in the USA

[@apesintanks162]

Как с расчётом металла на прочность? Делали какой то тест? Как он выдержит суровую жизнь тормозной системы? Если ошибиться в расчётах можно дорого заплатить. Тормозная система это одна из тех с которой не то что семь раз отмерь один раз режь. Просчитывали все? Видос огонь, не вижу смысла ставить рычаги от срт если можно с переходника поставить любой суппорт. ❤

[@_demon1k_]

Да, производилась проверка на прочность (изгибающее усилие, крутящий момент и ударную нагрузку) переходной пластины, в соответствии с нагрузками был выбран материал изготовления и толщины элементов. Этот вариант (на видео) переходной пластины имеет слишком большой запас прочности и соответственно лишний вес поэтому позже будет облегченный вариант.

[@apesintanks162]

@@_demon1k_ браво. Это шедевр. 👍👍👍👍

[@UtilitieSupply]

Outstanding work. You should be selling these.

[@_demon1k_]

Thanks

[@jeremymcclain891]

What are they? I have a 2006 dodge magnum srt8 and just got 2016 hellcat 6 piston calipers and 2 piece rotors. Could I use this product? It looks just like yours.

[@_demon1k_]

@@jeremymcclain891 If you have the magnum version of the srt8, you don't need additional adapters, you already have the srt front steering knuckles that the 6 piston calipers from hellcat mount to

[@jerardogonzalez8103]

Where can I find this bracket and would it work with the 4 pistons as well

[@_demon1k_]

This bracket I designed for the new model 6-pistons caliper Brembo GT with radial mounting and a brake disk from Hellcat 390 to 34mm. The bracket was made from a my 3d model on a milling machine. If you want to use a 4-piston caliper from the SRT8 or R/T392 models this will not work, the caliper is mounted through the ears and has a 360 to 32mm brake disc, these discs also overheat if the brake is used intensively. I would recommend you to use a 4, 6 or 8-pistons caliper with radial mounting and minimum 390 to 34mm brake discs from Hellcat, then this bracket will fit and I can send you a model or help you develop a suitable bracket.

[@kevindavis5311]

@@_demon1k_ this is what I need! Where can I get a bracket for 6 piston from?

[@_demon1k_]

​@@kevindavis5311 The first thing you need to know, because you have a caliper on the AWD side of the bumper and the RWD it is on the door side, you need other calipers, as 6-piston calipers have different piston size from small to large and this change must be in the direction of rotation of the wheel when driving forward

[@eryqmckinney3525]

is there a way i can purchase front and rear set?

[@_demon1k_]

Right now, I'm not yet selling finished kits because I've only developed a mount for the front calipers for a Hellcat 390/34 brake disc.

[@kevindavis5311]

Is there anyway I can purchase the front set? I did a whole rear conversion for knuckle and it fits good just this AWD RT is rough for the front.

[@_demon1k_]

@@kevindavis5311 Right now, I don't sell ready made caliper adapters, I can only help with a 3d model or blueprints to make them. These adapter plates are designed for RWD, I'm not sure if they will work for AWD because the knuckles and wheel hubs are different, so the 3d model needs to be adjusted to fit on AWD

[@_demon1k_]

@@kevindavis5311 Yes, for the rear suspension, the easiest solution is to replace the knuckles and install calipers from the SRT version

[@ODDfutureALLday1]

Is there anyway I can contact you for your that CAD file, I believe I have the means to cnc the aluminum part

[@_demon1k_]

Sure, email me on instagram and we'll discuss in what format a 3D model or drawing is needed.

[@ODDfutureALLday1]

What is your instagram?

[@_demon1k_]

@@ODDfutureALLday1 The same as the nickname of the channel @_demon1k_

[@mclaurinxjuju3647]

so hellcat brakes would fit on my RT with the bracket?

[@_demon1k_]

No, hellcat calipers can be installed on RT only with SRT knuckles, because hellcat calipers are side mount (end mount). The adapter is designed to fit Brembo radial mount calipers without replacing the knuckles on RT, SXT, GT models

[@skybudd]

How much would you charge me to draw a plate?

[@_demon1k_]

write me a message on Instagram (instagram.com/_demon1k_/) or email ([e-mail])

[@ItsMLorenzo]

@@_demon1k_did you make a new ig account?

[@Naleeze]

bro how do i get that bracket

[@_demon1k_]

I don’t sell ready-made adapters, I can only sell a 3d model for manufacturing in your city

[@srt8soldier478]

Where is this whole kit available?

[@_demon1k_]

Right now, you can't buy a ready-made kit. But you can assemble it yourself, there's nothing complicated about it.

[@pablojuan9157]

can you make me these adapters? i’d gladly pay for this asap

[@_demon1k_]

I can sell you a 3d model or drawing for fabrication on any CNC or milling machine in your city. I can also develop an adapter for your existing components. Write me a message on instagram

[@jason305dallascowboysfan8]

Man your a Legend for this.

[@_demon1k_]

Thanks bro, I will be glad if my video helps you and others to improve car brakes

[@M.Kabane]

Bro installing six piston Brembo break on a bonestock 5.7 .. thats over kill.. those are barely any faster than the 3.6 V6 ...

[@_demon1k_]

🤣I think it's murder to drive on stock brakes with 3.6, 5.7 and 6.4 motors because after the first braking on the highway from 150-160km/h the brakes stop working properly. Well, as for faster 5.7 than 3.6 I think you should drive all motors a little more and then you will probably understand the difference between V8 and V6.

[@aleksandrslepushkin4941]

Круто огонь

[@kosharidze]

[@dawidkorzeniowski6100]

hello mate, i will drop u an email soon

[@Lmgbangbang]

What’s your email need that asap

[@_demon1k_]

[e-mail]