PVC Coated Rubik's Cube! | SpeedCubeShop.com

[@JPerm]

You can get the coating by going to speedcubeshop.com/ and check the option to add PVC coating when selecting your cube! It's $24.95 so only get it if you're really sure about your cube, and want to improve your competition results! (use the discount code JPERM).

[@mykull5545]

J Perm it already available for non setup cubes considering I just bought a pvc coated we with discount code JPERM

[@sithlordbinks]

I bought a cosmic gan 356 x and coated it with pvc. Even with the J PERM discount (saved $5 btw thanks ur a cutie

[@rarepepe8790]

They didn't add a second coat for me help Edit: I know who did quality control it's like JM

[@migel_zhen4050]

Is the coating service can be also on a Stickered cube?

[@rarepepe8790]

@@migel_zhen4050 I don't think they give stickers then

[@codeskills1171]

In one sentence: perfect for every season!

[@valencehockey1668]

codeskills yes

[@noeruchangd]

_sigh_ *proceeds to melt PVC pipes to coat all of my cubes*

[@onepace_shorts]

@@davtianvahan9805 xdddd

[@Peter-np6zo]

Yoda8778 hello fellow gd player

[@auri8810]

@@Peter-np6zo sup other fellow gd player

[@bluie.]

@@auri8810 hello other other gd player

[@AzPlayz1052]

i did that and i in heaven

[@bluepepper5488]

i vote we push the term "glazed" for this cube. i mean, look at it _its a fricken krispy kreme boi_

[@nikosucksatskating]

glazed teracotta 🤔

[@not_skyee]

@@nikosucksatskating Minecraft?????

[@noahdomingo1162]

@Qboid cursed

[@BlueAsh532]

Oh yeha, *That shiny yummy krispy kreme boi* I would eat that gan cube with that was the name of the cube.

[@tintin1222]

Lol, may be in the future we will have some cubes like: "Gan 356 Xs Ultimate PVC coated Boron Treated Full Fitted Pro M"

[@ngothanh1350]

When you go to that time it will be GAN 10000 X plastic something coated

[@anobject9622]

dont forget polymer coated!

[@andish9227]

Don't forget professionally lubed!

[@ngothanh1350]

yes i won't

[@biconsi5460]

ngo thanh gan won’t be making 100x100 ya know

[@ITz_Skittle]

I used your discount code J perm when I bought my speedcubes and I learned 2x2 and 3x3 from you thx so much😁

[@JPerm]

Thank you!

[@ITz_Skittle]

J Perm your welcome

[@theraviolimonster6938]

@@JPerm i used it when i recently bought a 2x2 and 4x4. I also used it way back when I got my yuxin little magic3x3

[@6ohs]

@@JPerm no j perm. THANK YOUUUU

[@not_skyee]

@@JPerm ¯\_(ツ)_/ ¯

[@mikoajmackowiak6993]

Finally cube for Jay.

[@leobozkir5425]

😂

[@kaistaunton4689]

No more aggressive leg slapping

[@rrrrre2905]

lmfao

[@redtiangco9103]

gts3m with ridges and pvc coated would be a perfect cube for jay

[@தமிழன்-ர7ட]

He has to coat his gts3m with gravity grip

[@AlfredSpeedcuber]

4:35 when you will do an OLL but you realize you know the OLLCP for that cases hahahaha

[@cheeseburger5716]

Lol true

[@natebisque6067]

your pvc coating is so clean, I have the same cube, but I can't get a layer of dirt around the pvc coating off

[@jandellko]

noone: scs: lets put plastic on top of MORE PLASTIC j perm: beats pr lol

[@user-go5he1fe1g]

Haha'nt

[@josiejorubric4958]

Impressive

[@jazztinchua5325]

Scratches at a level 6 with deeper groove in a level 7

[@JohnAJ-07]

Jerryrig 😂😂

[@smitshah0706]

Because of you I now average around 30secs love your videos.The website you created is awesome and I have learned 45 algorithms of oll and only twelve are remaining

[@spifuntastic621]

I really do agree with the fact that ur cube feels different after a COMPETITION, generally my cubes tend to get super sticky and go back to normal 5 days after comp and those 5 days r super annoying

[@alanbitsch731]

Did you apply the extra magnets to the coated one too?

[@JPerm]

yes! regular springs though cause as it turns out, I only required stronger springs to pair with weak magnets. with stronger magnets it doesn't matter anymore

[@supa_Mcnugget]

@@JPerm hey j perm can I ask you a question?

[@twistiicuber1055]

@@supa_Mcnugget u just did my dude

[@ClumsyCuber]

Jacobo Muñoz Hurtado because he watches cubing videos

[@supa_Mcnugget]

@@twistiicuber1055 I know. Since I was the 160th or so comment I wasn't sure if he would find my comment but he did..

[@eerokaartokangas]

Such a great invention! Probably gonna get a coated MF3RS2M once it's released :)

[@Carlbarl.]

Can’t wait till speedcubeshop comes out with clear pvc pipes

[@wasteland3447]

But does the coating scratch at level 6 with deeper grooves at level 7?

[@thespeedcubingstudio2537]

Lol Jerry Rig Everything

[@autumnleaf8907]

so gravity grip on cubes? niice

[@mortimermouse3086]

As someone with incredibly sweaty hands, I need this. I have not upgraded cubes in over a year, and this video convinced me that I need PVC coated cubes.

[@NoahS4226]

What's your 3x3 main?

[@mortimermouse3086]

@@NoahS4226 MF3RS2 M

[@phalentin]

Not many people use PVC Coating anymore. Is it still worth it or doesn't it really make a difference?

[@marsomatic639]

Can you use it for blind

[@tihomirmavricek]

I guess yes

[@TurboSauceOA]

I don't see why not

[@sand6463]

TurboSauce the overlay stickers look like they can be felt ,which is probably why the question was asked, but as long as you can’t distinguish different pieces it should be fine

[@TurboSauceOA]

@@sand6463 ohhhhhhh that makes more sense 😂 I was just like "well yeah... It's a cube? Right?"

[@ritvikprakash5758]

Love u jperm

[@blizzardcuber788]

Scs didn't listen to me. Glazed is much better than Pvc

[@lauritsjacobsen8345]

Yes

[@NoahS4226]

@J Perm I've recently started practicing 4x4 but I would like to get faster. I'm sub-13 on 3x3 but my 4x4 average is like 53 on a good day and I feel like I should be a lot faster at 4x4 than I am, at least sub-50. I use Yau of course. Below are the time splits for each step: F2C: sub-5 First 3 Cross Edges: sub-8 L4C (Half Centers): 8 to 8.5 Last Cross Edge: sub-3 3-2-3 Edges: about 11 (I know a bunch of algs for L2E) And 3x3 Stage: about 16 My OLL Parity is like sub-3 My PLL Parity is sub-2 (counting the regrip before the alg) What should I be working on the most? Also, let me know if you want to see me do a couple example solves. Not sure how helpful that would be. Thanks in advance!

[@JPerm]

Planning 1 center + bar while tracking the last bar is very important for f2c. For edges make sure you eliminate rotations by doing different inserts, and make sure you look ahead for all steps. Your splits look good for 53, so just keep focusing on whatever you think you can improve most on at the moment.

[@NoahS4226]

@@JPerm Thanks for the reply. I can plan F2C like that about 80% or so of the time. Rotations are a weakness of mine and I've been working on different insertions particularly in 3-2-3 so I'll keep that in mind for sure. My look ahead in first 3 edges definitely needs some work. I'll keep your advice in mind. Thanks again

[@millenniumedition]

How do you coat a cube that you have already bought without the coating?

[@shawnvle]

Shinier is obviously the most important part.

[@cookiecubing1235]

I am like the average amount of late this time, either way great video :D 😃

[@JPerm]

haha a comment every video about how late you are 😂

[@cookiecubing1235]

J Perm lol it’s been because of school recently 😢

[@4ccuber945]

This cube is awesome

[@vicasooo]

I have a thorough video of it on my channel too :) I have a MF3RS2M coated and it's honestly amazing!

[@wasteland3447]

I have 1 question. Can you send an existing cube you own to SpeedCubeShop to get it coated or do you just have to buy a new cube overall.

[@Wrennyyy]

You can send in an existing cube! :)

[@keplercuber9155]

Veronica Renn really , so I don't have to buy a new cube again ? I can just send in my current main , they will coat it and send it back ?

[@potatoj.4011]

@@keplercuber9155 yes, you have to pay 24 usd tho

[@09-cameerbousaad47]

Does the hair drying trick works out on uv coating as well 😅

[@pantoffelkrieger8418]

Loved that vid as always. Great job

[@urmilamathur8714]

Hey J Perm please consider for making a tutorial for square 1. I'm gonna buy it on my birthday next Month so I think i would be amazing if you make a tutorial on it this month or the following month whenever you feel so.

[@colli7297]

I bought the Square-1 for my birthday and I still don’t know how to solve it...

[@lilyyy411]

I don't think j perm knows how to solve it either.

[@urmilamathur8714]

@@lilyyy411 he don't know but he tried intuitively in one of his kids and he got it solved .. so I want him to teach us after he learned solving it

[@urmilamathur8714]

@@colli7297 right now I think the best tutoring on KZbin is of DG cubing he made a really nice vid about it

[@lilyyy411]

@Professor CubesI meant he doesn't knoe how to speedsolve it

[@IGCuber]

Very cool!

[@noitall9476]

Love your website

[@jonathanfuchs6262]

i love how when the gts3 came out, everyone where like "oh i dont need more grip on a 3 by 3" but now this is suddenly amazing. to be fair this probably helps more than the ridges but i just wanted to pint out that helping with gripping the cube didnt seem needed before.

[@cookiecubing1235]

Jonathan Fuchs lol some cubes are really slippery when it comes to grip, so I guess this is pretty cool

[@cubeonixxgenesis173]

WOW!!!

[@keplercuber9155]

Poly vinyl chloride PVC Looks great.

[@sayedalshayan9521]

J perm can you please tell which you like better like the gts3 Or the wrm?

[@JPerm]

I've grown to dislike the ridges a bit, so I prefer the WR now.

[@sayedalshayan9521]

@@JPerm thanks for you opinion now Imma order the wrm lol

[@nexion2406]

I have problems with my cubes being scratched and that really annoys me like with my Huanglong, the finish feels awful because it is so scratched. I think that I may need this.

[@TechsyfiEdits]

jperm I am a small youtuber thank you you inspired me to make a cubing channel

[@joshbirns9878]

Can you also do a vid on UV coating?

[@joshriker4173]

Will this be available separate from the Cosmic setup, or specifically as a Cosmic cube exclusive feature?

[@JPerm]

I think it will be separate!

[@Wrennyyy]

It *will* be available separately! :)

[@solidbro9407]

1:43 Me: My cube burned in competition.

[@venomousstriker4715]

This is low key the only thing speed cube shop didn't rip off from the cubicle *CHANGE MY MIND*

[@venomousstriker4715]

SpeedCubeShop I’m talking about the premiere stuff I love you guys still but a lot of your stuff seems to be rip offs

[@icebacon_]

@@SpeedCubeShopOfficial I love u guys as much as i love the cubicle but based on several videos I saw such as Cube Solve Hero's video do you really hate thecubicle that much?

[@Hikaru109Ichijyo]

2021, top tier cubes come stock with PVC coating and nano material slide internals with weighted ball bearing system for fidget spinner like speed

[@skkitels7917]

What about gts 3m, there are ridges can you to this on that cube ?

[@JPerm]

Not sure, you'll have to wait until SCS releases this to see which cubes they can do!

[@Samdehaan2007]

Nice video

[@michaelvernon9459]

Any tips to prevent sweaty hands? I just want grippy hands when I solve

[@cookiecubing1235]

Michael Vernon I always get sweaty hands after like a minute or two of solving so anything bigger than 5x5 I get sweaty hands near the end of it lol 😆

[@JPerm]

Washing your hands with soap can help. But it doesn't keep it clean for that long if you sweat again :/ have you tried a towel?

[@michaelvernon9459]

@@cookiecubing1235 same here

[@michaelvernon9459]

@@JPerm Bruh ty for responding, I actually wash my hands before my solves, and I keep a towel nearby to keep them dry, but washing my hands doesn't last that long. The solve I got my pb on (17.49) I washed my hands right before so they had a lot grip.

[@Wrennyyy]

Gravity Grip! :)

[@camerondale6529]

2:58 I told you what?

[@charon116]

cameron is the owner of spedcubeshop

[@charon116]

not you

[@skull123]

@@charon116 the joke ---------------------------> your head

[@arifwazir3584]

@@charon116 r/woooosh

[@HelloSnake]

What budget cube should I buy for just learning the beginner method? My cube isn't very good. I was looking at the little magic.

[@JPerm]

it's a great cube! If you want to try a magnetic cube go for the Yuxin Kylin V2 M.

[@HelloSnake]

@@JPerm Thanks. Would magnetic be helpful with the beginner method? My goal for now is to eventually be able to solve a cube without using a guide. Not going for fast times, I doubt I'll ever be that good. UPDATE: I bought the Little Magic because it would have cost more than double to get the Kylin and would have taken longer to arrive. I'll keep it in mind for the future. Amazon.ca didn't have a ton of options.

[@ceilingphan8575]

Dude this has got to be the biggest lint collector.

[@oldschoolstyles8668]

hey! what tripod/camera do you use? also does the tripod just sit infront of you?

[@JC360XL]

I don't care about the coating i just want a really shiny cube, i don't know why.

[@amarm.m.5968]

you wish to be as shiiinyyyyyy

[@kendovariety]

On 3:32 can i do it on my gan 11m pro uv coated cube? cuz it has a scratch on it

[@junkcuber5611]

Can you get this coating on a stickered cube? It would make the stickers not chip or peel I assume.

[@JPerm]

Not sure yet, but they might have it in the future!

[@nicosspeedcubing2239]

Thanks for the video it was great as always

[@bensilashi8262]

Jperm! Did you get to try the new 4x4 WRM? Could you review it for us simple folk? I know your input would be super valuable

[@cookiecubing1235]

Ben Silashi I would like that a lot :D

[@JPerm]

Haven't tried it yet, but when I do I'll make a review!

[@bensilashi8262]

@@JPerm thank you so much! :)

[@the_bob_147]

"it's hot... I normally describe how cubes feel and not temperature so I'm not very good at this" lmao

[@indraasthana6629]

Is it your main??

[@ramdascarpenter4879]

Why you don't connect your speedstacks timer with your pc with aux cable??????

[@3thxnng282]

does the pvc coating increases the grip on the cube?

[@superstar308_]

yeah of course

[@CosmicStar3]

That’s… the whole purpose🤦‍♂️

[@LoavesofBread]

Does anyone know of more reviews of this coating on KZbin?

[@keplercuber9155]

Loaves of Bread idk I'm still looking.

[@TommyWashow]

my guess is the overlay stickers are some kind of 3m laminate. I make street signs and we use a laminate with a similar amount of scratch resistance. I hope they don't end up selling them separately cause I throw out piles of the shit on a daily basis and I hate to see people getting ripped off

[@kakouhai7162]

Legit what J Perm does J Perm use

[@SameerAggarwal]

So that's what I liked it so much.

[@JPerm]

I thought I told you what it was lol

[@SameerAggarwal]

@@JPerm You did, but I forgot to ask about the tensions, because I can't find any good ones. And at my most recent comp, everything you said about the sweat, and stickiness was 100% correct (obviously). My Valk felt very weird, and I couldn't turn properly so I switched to my WR right before finals, and got a PB ao5 lol

[@kylemillsy]

Dylan did you get the overlay stickers on it

[@StealthNinjaBricks]

When stickerless cubes become stickered.

[@ralfius12345]

But does it scratch at level 6, with deeper grooves at level 7?

[@xp.wesley858]

good one, JerryRigsEverything

[@allihusk6519]

PVC coating will be the magnets of 2020/2019

[@LKCubing]

Me: look at my polyvinyl chloride coated boron treated Rubik’s cube Scientists:????

[@jirikadlec9388]

XDn't

[@phantomcandy9230]

This is good stuff.....👍👍👍

[@aarushtripurneni7867]

Can you get pvc coating on a cube that you already have. Or do you have to buy another cube and get pvc coating with it

[@gioalameda6237]

What is your fastest time for solving a 3x3x3

[@JPerm]

5.34! bit.ly/JPERMPBS

[@NoahS4226]

@@JPerm Then there's me over here happy with a sub-10 lmao

[@xdfdf_]

Do they have it for stickered cubes

[@JPerm]

I believe they will! But the focus is on stickerless right now

[@xdfdf_]

@@JPerm by the way is valk5m your main

[@JPerm]

yes

[@xdfdf_]

@@JPerm I average low 12 on 3x3. What should I average on 4x4 and 2x2

[@xdfdf_]

@@JPerm there is a new 4x4 pll parity alg. It goes like Uw2 Rw2 U2 R2 Rw2 U2 Rw2 Uw2. Sebastian weyer used it in 17.42

[@hladetinofobia1453]

Do you have any recommendations for a new cube

[@riader]

PVC for survival situations, lets check it out!

[@Goodliving_17]

Great Video.... From Pakistan

[@toasty6896]

Your the best

[@eliasujashvili7113]

That makes it STICKERED, BTW it's $30!

[@romezry]

pvc for survival situations, lets check it out.

[@dampseeker]

Will it protect against people throwing my cube?

[@Gdcyc]

This is work FOR a Gan uv of fabric?

[@overcomplexification]

is it for survival situations

[@inte4691]

do you know if they will do it to other n by n and other puzzles?

[@dozh6153]

When can we expect this to be available on SCS?

[@Wrennyyy]

Within this month! :)

[@samfelton5009]

Hey, it’s my birthday coming up - what speed cube should I ask for? Don’t worry about budget - I can put money towards it if it’s too expensive

[@nightmonkey9785]

Is this the same as Uv coated ?

[@PritamkaGarden]

What spring you used and what's your spring tension?? Plz reply

[@MuhammedTalhaArikondu]

How much time it takes that the cube come into our house when i am going to order it. I bought the qiyi warrior W from Amazon for 14,99.

[@chikengas4052]

PVC coating isn't really my thing cuz I algs like t perms when a finger, in this case my thumb, gets dragged and when the cube is sticky, that's not very possible. Just personal preference :)

[@Lee-xx9hw]

Is the cube is coated just outside or whole plastic

[@enzodeganiarantes2968]

I think it makes sense to just coat the outside since it is there to prevent scratches.

[@ifti.22]

P J E R M

[@michaelliu1412]

What timer do you use? I use CStimer but the timer you use in your videos seems cool. I want to try it out.

[@potatoj.4011]

He uses Speed Stacks.

[@countryballsanimationsandm5362]

StackMat G4 Timer

[@risingstorm679]

Is it available for stickered cubes?

[@Dr.Blader]

Ye

[@lime_9480]

Can i apply it on my new VALK 2 M ?

[@jannadalagan9254]

wow thats so cool bro

[@baominhtrang3068]

Veryy useful cube from SCS recommented it :))

[@honguyenkhanhduy]

which we cant afford :v

[@zelnyte]

hey dylan or jperm i got a question to ask, so i was thinking to learn full oll but i dont know where to start from because there are so many case to it. so can you plz let me know the order to learn the oll by the shape one by one? if no just tell me how to start. thx ^^

[@JPerm]

learn a group of algs that are the same shape, and learn the shorter ones first. check out jperm.net/algs/oll

[@blindleader42]

May I suggest the easiest place to start If you already do 2look OLL and PLL. You already know OLL 33 (last 7 moves of the diagonal corner swap of 2look PLL). OLL 45 is the other version of that shape and is even easier to learn.

[@blindleader42]

@@JPerm I wouldn't mind a suggestion or two of which shapes to consider first, after OLL 33 & 45.

[@zelnyte]

@@blindleader42 i alr know 2 look oll i just starting to learn full oll but well thx for the tip

[@zelnyte]

@@JPerm thx jperm and i'll sure to learn it from your site ^^

[@isaacds_]

Really cool