SPECIAL GAN "CHAN" CUBE / ALL BLUE 2X2 / SQUARE-2 UNBOXING | SpeedCubeShop.com

[@valiyar7541]

"And to annoy some of you, I will twist a corner" He knows where it hurts

[@l3nnybear515]

"And now, I will flip an edge"

[@bumbleandsimba]

OWWŴWWWWWWŴẀẂẄWWEWEWWWWWEOW

[@antirogue825]

@@l3nnybear515 "And now, I will remove 2 center caps and swap them"

[@l3nnybear515]

@@antirogue825 "And now, I will peel the stickers"

[@DangMinhQuanSpeedcuber]

@@l3nnybear515 u went too far man and now, I'll swap the pieces with an aolong

[@dhrupadr5160]

I remember clearly that 2 years before i was so mad that i couldn't solve a rubik's cube. I checked out a million videos and i was so tired because i was scrolling through youtube the whole day but i suddenly ran into a very good tutorial i learned to solve it within 15 mins i was so happy that i almost threw the cube up air And this is how i found out your amazing channel :)

[@Microwaveinaball]

Nice!

[@yoyogamer4348]

same lol

[@ardabzyel]

I also found it like that!

[@CyanZone0]

not same for me (idk how I found)

[@nealzrealz7483]

Same

[@Male_Parent]

I'm pretty happy with my Diansheng 9x9. After lubing and lowering the tension slightly it turns really well for a 9x9 (It turns better than my really old shengshou 5x5 I got like a decade ago). It reaches a good balance of magnetic strength and total cube weight. However I would never speed solve the 9x9 so the magnets in the cube are more like quality of life. I don't feel comfortable magnet modding a different brand 9x9 so this does the job well and isn't absurdly heavy. My only gripe is the waste of plastic, they could've definitely cut down on that packaging a lot. I do like that they give you a bag for the cube though. Nice addition because most cubing stores only sell bags that hold 5x5 and below and those same bags can barely hold a 7x7 if you squeeze it in. BTW I had the same issue with the plastic box it came in as well. They really shouldn't put the cube in that box, the box is stupid and is just a waste of hard plastic.

[@Liam.2000]

Thank you so much for this extraordinary story of your 9x9 experience. I hope you live a very happy and fulfilling life. Also you’re a nerd.

[@notshoya]

@@Liam.2000 💀💀

[@hajackie9445]

Me:shut up!

[@Penguin........]

11:39 The box for the diansheng magnetic 8x8 and 9x9 opens like the gan 356 m and 354 m v2 boxes. The pieces aren't attached.

[@gcolombelli]

I must say I quite enjoy the CH RM3M, despite the added weight, for me it just fixes the annoying instability that I never quite managed to fix on a normal RS3M. The effect is very subtle, but it is there and it makes it just so much better, at least for me. No regrets there at all.

[@narasimhamoorthy1685]

Ayansh😊😊😊😊😊😊🎉🎉😅😅😅😅😂😂😂❤❤❤😢😢😢😊😊

[@not_vinkami]

10:13 Hopes not required. Your translator is right here. Page 1: How to Play * The cube has 4 major ways to play, which both challenges your brain power and speed 1. All pops challenge Rule: Turn the cube and make all blue blocks on each face pop out 2. All pops solve challenge Rule: Do all pops challenge, then solve it 3. Non-all pops solve challenge _Self explanatory. Not translating that_ 4. Draw card and solve challenge Rule: Draw a card from the 10 cards _that J Perm can't figure out how to use_ , pick a face, and scramble the cube to that state. Yellow means the block is popped out and blue means the opposite Page 2: Block Popping Schematic _Just tells you the possible configurations of each face_ Page 3: Challenge Mode The 4 major playing styles can be played in singleplayer or multiplayer _(r u minecraft?)_ . Different modes, same enjoyment. 1. Singleplayer challenge mode Use a phone or a stackmat timer to count your time. The faster the better _(duh)_ 2. Multiplayer mode _Can't see clearly but I guess it tells you to find a friend and compete with the time to solve the cube_

[@sketchycube9687]

For a Chinese guy like me I thought that was obvious, but suddenly realized some people can’t read

[@callmeqt1269]

Doing too much but I appreciate it.

[@BrokenRecordings]

no way you can read chinese 😳😳

[@SolarGamesGoober]

thx

[@ahmed4363]

He can Read Chinese!

[@JennySYS]

"i inspected 2 moves" is my new favorite thing that jperm has ever said

[@bencenagy5459]

So it's like me.

[@mohamedfaris-d4q]

Nothing can beat ' hope you can read Chinese '

[@myweirdsecondchannelwithap9070]

“I am better than max park confirmed”

[@burntpineappl]

​@@myweirdsecondchannelwithap9070"safety goggles👍"

[@JoeBrowning-n9k]

Are you sure? He also said "hope you can read Chinese."

[@aravmangal9083]

the OS cube works by having magnets. since same sides of magnets repel they have it set up so that as the cube turns the magnets get close enough to where they would repel/attract other magents. Becuase of the way the magnets are set up they push the pieces on the sides out so that's why turning different sides does different things.

[@kronos_1337.]

Haveing?

[@DeathKnight0124]

@@kronos_1337. yes

[@waldolemmer]

Agents?

[@waldolemmer]

Sindes?

[@waldolemmer]

Sube?

[@jesipohl6717]

it's so cool that you showed yourself having trouble opening the container, happens to the best of us and honestly makes the video, packaging is the hardes puzzle

[@yangzhang4170]

10:52 “I can actually see myself liking this...oh nvd I hate it”-Jperm 2022 fastest mind changer in the world😂😂

[@lutimstrickshots9253]

J Perm's next video: "Attempting to solve a Square-2 (With NO Help)"

[@crayzcubing]

probably, actually... Update: It actually was.

[@Xiga1980]

He 100% will

[@huismus111]

he will, for sure

[@F_v1]

Yea

[@nealzrealz7483]

Yeah

[@BeniPls]

Really hoping the secret 3x3 is Tornado v3 with no corner cutting issues. "Hey this cube is pretty quiet"

[@nguyeennn7464]

Gan 13?

[@trqsh8629]

Tornado v3 coming out really soon though. So it might just be

[@rex2201]

Tengyun v3?

[@vainplayz3029]

It is probably a moyu wrm cube

[@noamkatz130]

beni is right

[@nezugt]

it’s always a good day when J Perm uploads a new video!

[@yoyogamer4348]

true

[@temjaimahantakhun9981]

agreed 100%

[@cubingmaster5314]

He was a great youtuber

[@g6rf]

@@cubingmaster5314 was?

[@griffinclem5574]

if that twisted corner on the gan cube annoyed you like it did me, just watch the video 3 times and it will have been twisted back to 'solved'

[@malweasel]

Smart

[@AutZeroOneGotBanned]

yay

[@wildrubikslegokids1242]

1:05 I AM TRIGGERED!

[@haadynaushahi8716]

49 seconds ago, this is the fastest I've ever clicked on a youtube video

[@naveedy3407]

fr

[@parthdhage2241]

For me it was literally 2 seconds 1st view and comment (on that video)

[@manavdantkale]

If u subscribe more creators, ur chances will increase

[@EnheTook50Benadryl]

Lame

[@brocoli4254]

Yeah , never miss j perm videos !

[@Wohnrath738]

I was feeling rlly sad bc some things in life arent going right but you uploading got a smile in my face

[@Dukz125]

“This is starting to feel like a fidget spinner.” My favorite j perm line 😂

[@PikaZap]

About the orange internals gan cube, is it possible to take out the outer stickerless parts of a normal variant of that gan and put them on the special one? That would be pretty cool

[@SomeR2ndom]

OH YEE

[@durskeeirumi]

genius

[@gabismeche5043]

Those parts wouldn't have orange internals though.

[@Gabriel.K.G]

You can do that but it is kind of difficult

[@Gabriel.K.G]

Z3 cubing has a tutorial on it

[@rowankeller9345]

Can we all agree that j perm never disappoints

[@yeet5109]

Yeah except for 1:03

[@newbieplayzyt]

yes

[@Avidyoshi]

Ya

[@SkandhaGD]

.

[@Signify.]

I reckon he disappointed his father when JPerm came to the speedcubing scene

[@xblHumptyDub]

I got a gan chan with the green internals and once I had set it up a bit slower than out of the box I love it. Use it as my main.

[@botanicalcubes]

Why didn’t u buy the normal gan 12 that’s cheaper 😭

[@xblHumptyDub]

@@botanicalcubes I specifically wanted the off white colour and green internals. I also recently got a new higher paid job so the money didn’t affect the decision Edit for grammar

[@botanicalcubes]

@@xblHumptyDub oh

[@Demonslayr3000]

@@botanicalcubes j

[@raine0711]

@@xblHumptyDub 😐👉🚪

[@lucahermann3040]

11:44 you're supposed to gently squeeze the front of the box in order to push the hook back and unhook it.

[@fritz-k9t]

6:20 I got my eye on that one for christmas! You've taught me quite a bit on 3x3's, and now I'm finally ready to upgrade from a Rubik's brand!

[@thanospavel9970]

2:45 i don't know why, but this surprised tone in his voice always makes me chuckle 🤭

[@StellarStina]

the chan looks so beautiful and smooth, and I am a sucker for packaging. I'm scared to check the price. also the OS cube 100% feels like a puzzle from an adventure game. I wanna try it just for tactile reasons.

[@Unknownbrawlstars23]

I like it how he likes the box more than the chan cube itself 😂

[@KaiJuanta]

I’m the same

[@panzer4271]

and i'm insane

[@XandyAylaAnneDudaElisaBella]

Im pretty lame.

[@starktownsend5656]

I’m still pretty new to cubing, but I finally was able to solve a 3x3 in under a minute, just wanted to share.

[@TheHispanicUsername]

Gg, i got my first sub 40 time (37.98) yesterday

[@vgkharryd]

Nice.

[@ucanfind.ucf.]

Well done! 👍

[@NISH6900]

Good job it took me so long to get sub 1 now i average 30 seconds and my pb is 24

[@326inminecraft]

Good job

[@Sulaikha5335]

finally!! J Perm uploaded a unboxing video!🥳

[@Avajackson2010]

14:50 soo i ordered one of those and I'm still waiting for it to arrive.. the keychain is connected to the cube itself.. i honestly don't know if it's removable but i mean it's honestly pretty good considering the fact you can use it in class and the teacher wouldn't realize 🤭 but yes and there are many other reasons!

[@ericchen3129]

I wonder if there will be a review for the new "Rubik's Speed" 3x3. Apparently it's the first magnetic Rubik's brand cube...

[@futureddude4250]

Wondering if the secret 3by3 is the Xman tornado V3 since I’ve been hearing about it

[@jayeluri12]

Bro... To open the 8x8 and 9x9 boxes, you just have to push on the area above the clip so it separates and then you can open it.

[@gijsenkoos4278]

Love how you chose to put zelda and chill as background music. Cuz dark world actually slaps SO HARD

[@johnrene7674]

I’m very curious about the 5x5 since it’s my favourite event and nothing has dethroned the mgc

[@mufa657]

ITS THE X MAN TORNADO V3 3:07 LETS GOOOOOO

[@leduy5876]

I'm going for a quick guess that that secret cube is the Tornado v3, mark my words, cube man Dylan.

[@landybulky8548]

It's obviously that cube and it's obvious that it is going to be the best cube ever

[@leduy5876]

@@davinkeee Yeah i can see everything adding up.

[@superfellaofficial]

thing is, max siaw and others show it without problem in their videos, so why wouldn’t j perm be able to?

[@craftnermc]

Hey J perm have been enjoying your videos a lot i was looking for 3x3 bld tutorial and i found your channel and then i was looking 3x3 OH and i watched your videos and I said this is the same guy who i learnd 3x3 bld and then i subscribed you. Keep up the good work btw

[@origamiaircrafts6165]

NOOOO!!!THE TWISTED CORNER

[@NYGEORGELIN]

Nooooooo j perm! You made my life crazy!

[@tzchnoalt3672]

5:00 "I am the best Square 1 solver of all time" *Proceeds to solve Square 2*

[@Cale_LS4]

🤓🤓

[@IshanGayal]

3:04 My guess is Tornado V3

[@harryforbes2492]

just got into bld solving and was wondering how long it took you to go from absolute beginner, to being able to solve bld comforably (a success every few solves)?

[@daveredman6146]

For me it was about a week with the beginner method, which was way faster than I expected. It was actually a surprisingly easy concept to grasp. I used Jack Cai's videos though, Jperm's videos are great too, regardless

[@harryforbes2492]

@@daveredman6146 cool thx good to know its not a painstaking process!😂 working on edge memo atm

[@somerandomdude81]

Its always a good day when j perm makes a video

[@Jkprecisioninc]

5:02 JPerm- I’m the best at sq-1 Me- learns the parity alg in a day.

[@maximumcarnage5762]

At first I thought the secret cube might have been the GAN 13, but the "Hey it's quiet" gave it away that it's the X-Man Tornado V3

[@TheMessyDeskxyz]

It’s been a while, definitely missed your cube reviews and unboxing videos.

[@fazgaming1746]

I recently got the 9x9 Diansheng M, and I originally was worried the plastic box would break upon opening which was a problem for me. So I figured out you just push towards the bottom front to open it without breaking it, rather than forcing the case upwards. I'm a bit late to the party, but if anyone has similar problems I hope this helped.

[@nugget2554]

3:10 Is that the Gan 13 Maglev???

[@Stlxr.]

@J Perm hello! I just ordered moyu rs3m 2020 what's your setting on cube? If you reply I will appriciate💚

[@catcxke_ha]

hey j perm, I’m trying to look for a good speedcube that I can stick with for a while, with a limited budget. should I get the gan 356 r or the qiyi ms??

[@Iron627]

the moyu rs3m 2021

[@Legendz_1Pump]

Its always a better day when jperm uploads.

[@nealzrealz7483]

True

[@naveedy3407]

True

[@gregyonno847]

Yes

[@VulcanOnWheels]

1:20 How about bending it back?

[@coinsteelelite]

0:36 J PERM FINALLY TOUCHED GRASS AFTER 69 YEARS OF CUBING

[@RayXGames97]

Lol

[@dashgbx7829]

The all blue 2x2 is so satisfying.

[@callummoriarty1225]

I love listening to him while im doing homework

[@curiousNic]

Even your none jokes are funny. And can someone please make a giant J Perm with the children's cubes?

[@crayzcubing]

Just when you thought Gan cubes couldn't get more expensive.

[@burnedgrapes]

we havent seen gan 13 limited editions yet lol

[@LegendaryLuan]

Hi J perm! Thank you so much for your great tutorials! Just got a solve in 36 seconds for the first time (was around one minute when I started learning cfop with your tutorials a couple weeks ago)! You’re the greatest cuber ever! Btw, do you think I can go to a competition yet?

[@Immoonwalker]

It doesn't matter how fast you are to go to a compertition

[@akshayakshayv5559]

@LegendaryLuan, btw I got solves in 21 secs its so cool right?? But seriously you can go to a competition nice job on your achievement, you can still make a one solve record to win.

[@StormSpider-iw1uz]

With the cubers home rs3m, why not just glue an extra magnet to the end of the corners? then it auto aligns more and actually makes a difference

[@snakefacegamer278]

Jperm - 'turns a cube' Auto generated captions - Applause

[@LiamTolentino]

Hey J Perm, what's your thoughts on the afterlife cube? I've seen quite a few other channels cover it, but I'd love to hear your thoughts on the concept :)

[@filip_1432]

I thought he wasn't going to say "Hope you can read chinese"🤣🤣 Edit: I'M FINALLY FASTER THAN JPERM AT SOMETHING! MY BEST SKEWB TIME IS 12 SECOND OR SMTH

[@novafnyt]

8:10 Bro turned into cubehead 💀

[@ReptilesGeniales]

1:51 I have always thought that moving the stickers made me solve the cube 😂😂😂😂 Thanks for showing me that the pieces can be moved to create a cube with only one color on each side !!

[@ex_yowen]

This is the first vid of yours I’ve watched in like 6 months, crazy how ur at 1 mil, I remember when u had like 100k

[@Weirdguy980]

0:10 i see that Xman cube there

[@Hamjihi]

Thats the x man wingy

[@catholiccubing]

It’s the tornado v3 isn’t it

[@Firebadger-lv4xp]

Yep

[@ericksandoval8898]

J perm when he sees a gan: the rest are not worthy Also j perm: doesn't even use a Gan as his main

[@bigoofersrock]

10:00 I think they’re patterns you’re supposed to try and make

[@alienrenders]

@J Perm Got a question for you. When I buy a new cube, I can set it up perfectly. It works great for that day. This happened with the GAN 11 M, GAN 356 XS and the WR M. But the next day, I try it and it no longer turns smoothly. It's like it takes more force to turn. It sticks halfway. The magnets even feel stronger though I doubt it has anything to do with it. I then think it's the lube, so I clean it completely, but it's still the same. I try changing the settings to no avail. The only cube that has survived day 2 so far is the GAN 12 Maglev. Any ideas what is causing this? I can't be the only one who has this happen to them. I'm really sad about the GAN 11 M. Loved that cube. But it's actually gotten worse over time.

[@bob2765]

yeah same

[@rifdyrishad7]

What lube did u use?

[@leonbosch03]

use a bit of weight 4 or 5 and then 2 drops of fast and 2 of smooth lube. but after like 3-5 days you feel again the differents. thats normal

[@alienrenders]

@@rifdyrishad7 I've tried both GAN lube and lunar. Same results. I have weight 5, galaxy, nebula and martian. Haven't tried those yet. I'll try weight 5. Not sure what would be fast or smooth lube.

[@alienrenders]

I think the lube gets in the center pieces and dries up. I think that's why the GAN 12 Maglev is the one that works the best because there's no actual contact there. But even this cube is getting slower as the sides start to stick. edit: Trying Weight 5 with martian on my GAN 12 that was starting to slow down. Feels ok so far. Still a bit sticky. I really don't want to loosen it. But better than it was. We'll see if it lasts more than a couple days. edit2: Yeah, Weight 5 with 2 drops of Martian took about 2 hours of cubing before it started feeling good again. It's really good right now. Getting better and better. It's almost perfect. We'll see if it lasts. You gotta be an alchemist now to see what combination of lube works best. But maybe Weight 5 is good enough and the others are crap. Dunno.

[@maxenceleboeuf]

Bruh, everyone knows about the Tornado V3, you don't need to hide it.

[@mattedriellebarberan6554]

9:55 I hope you can read chinese

[@oldibrahimacc]

Hope you could read chinese 10:08

[@sanidhyashukla421]

I have improved my vocabulary just by watching your videos.

[@ahmadbehrozsamadi3093]

i haven't really learned how to dolve a 3x3x3 from u but after knowing u i have leanred each and every thing from you i mean i even do not remember who did i learn it from but f2l oll pll 4x4x4 every thing i know about cubing i learned from u man thank you a lot you are the best youtuber

[@dishwashing.soap._.]

And just to annoy you, I will twist the corner…

[@mrbroke3217]

Funfact:iam 9 year old and im faster than jperm at pyraminx

[@ivytacker]

how much do you average?

[@mrbroke3217]

@@ivytacker 14 to 15 seconds and my pb is 10

[@ivytacker]

😃

[@GogoPvpYou]

​@@mrbroke3217 my average used to be 8 seconds 1 year ago but i stopped so its now mostly 12-13 seconds sad

[@epiclol5275]

First

[@spidey3759]

Ben

[@epiclol5275]

Lol

[@tryhardfighter1833]

When he twisted the corner I have never felt more jarred in my life

[@EquatorCubing]

"I might try to do a video where I solve this thing" Tingman, whose already done a video called "Solving the SQUARE-2 Puzzle With No Help" Tingman: AHHHHHHHHHHHHHHHHH

[@ricechild5661]

I hate corner twists, especially when you do them on perpose so now I'm unsubing

[@rip_ded]

shut up💀

[@thecubinggod4776]

guys, i have a channel too

[@thecubinggod4776]

please can everyone subscribe to it?

[@thecubinggod4776]

please can yall view it?

[@thecubinggod4776]

and hit the big red button?

[@thecubinggod4776]

please. i will be extremely grateful

[@GamerGuild07]

Bro no Ok.

[@grunklebran7535]

You should try the core magnets on the wrm 2021 maglev, it’s really good in my opinion

[@sno143w2]

Your turns are unreal

[@sinaloamp31]

Can we all just take a moment to look at how satisfying his moves to test the cubes areat he start

[@Gmann1108]

Good luck on putting on the stickers👏🙏

[@johnnaethannavas8818]

Hey j perm, i bought an rs3m 2020 a few months ago. At first its good, the cornercutting is good. But after a few months, it got worse. It cant even cornercut 45 degrees. The centers also unscrews itself a lot. Someone said i need lube but i dont have money for that. How can I fix my cube.

[@Kestrel-cubing]

Well I’m not J perm but if you ever go to a competition and somebody has lube ask them to try and use their lube but if you can’t go to a competition try and tighten your cube and then use J perms trick and pull it apart Also please sub

[@SNUF_Nickname]

Good luck whit the stickers 😊😊😊

[@necroversegames]

I just was messing around with my Rubik's cube but I came up with an idea, what if you tried upside-down CFOP, making the cross on top and doing F2L on the top two layers, it would be weird for OLL, but everything is kind of the same

[@Emphetic]

My friend solves like this, hell for lookahead but fun to try for a bit.

[@harrisonoberg8085]

at 6:42, the edge algorithm is new to me, and i really want to know what it is

[@IbaccoFromRoblox]

Your small cube reminds me of my small 3x3 but it is bad turning it locks and the opposite of white is blue

[@lMLIKETHAT]

Hey I just wanted to say thank you for teaching me how to solve a rubix cube and I really appreciate you now got me into cubing and want to get better so I’m now watching your f2l videos and wanted to ask what cubes do you recommend that have a good price

[@flaggycube1010]

Moyu rs3M 2020

[@raidrain3395]

Parents - Go play with the neighbours kid *THE NEIGHBOURS KID* 1:04

[@thelinio7005]

Hi, I started learning how to solve a cube 1 day ago with your Video for beginners. I can now solve it in like 8min, but what shut I learn next? Just don’t know where to start.

[@somerandomdragon4655]

a stickered cube with black parts and transleucent purple insides would look amazing

[@Plopeq]

That " hOpE yOu CaN rEaD cHiNeSe" after the os cube nearly made me choke on my drink

[@EpicEesa36]

i have been subbed since before 1M, keep up the great content :)

[@doodlekaboodle8224]

2:00 I bet using POM plastic would make it super smooth n easy to turn

[@Wouter10123]

Your 9x9 link links to the 8x8. Are these the only magnetic 8x8 and 9x9s available? Are they worth it (at this price), or should I go for a non-magnetic one?

[@mrenderman9679]

if you twist 2 corners and the front of both corners from your view are the same as the front then you can still solve the cube even though the corners are twisted because you can do the last step of the white cross method

[@mrenderman9679]

the corner twist would be the same as a regular solve

[@cubee9403]

3:01 that may be gan 13 I have seen the trailer that it's gonna have edge to core magnets and I think right now it's on speedcubeshop