PW50 / How to fix throttle stuck open

[@mikeysummerhill3749]

Exactly what I needed to see. The plunger goes ALL the way down. I really appreciate it

[@timgauthier7891]

Dude… 3 days of messing with the carb and throttle cable. Thank you 🫡

[@spookygaming130]

This really help I'm a noob when it comes to this. Not had a bike in 15 or so. I'll have to check this today for me

[@simonsteffens7807]

I know you posted this years ago. Also I knew I forced it in the wrong way. But I just sanded the pin holder back, cleaned it up and it worked like a charm. Popping in and out of the carby no worries now. Your a legend mate. Thanks 😊👍

[@buddahmayne9273]

The ending was cool with the drone footage ride safe

[@WeirdAM7]

Just rebuild my son's carb and hope this is the fix! Thanks

[@ventriloquistguy-thechrist3458]

m comment is i had the same problem it was stuck and woulent fit file and sand fixed it but how did it expand in there to begin with thears no heat

[@tylersherman6637]

Very very helpful thank you very much

[@longranger308]

My plunger was not oriented correctly with that notch before it wad tightened. Now my plunger is stuck bad. Can that metal tit be removed so I can pull the plunger out?

[@JoseZavala-we4mb]

My kids pw50 I rebuild carb was running good now when I put it on run it wants to fly away I checked carb it's good starts right up idle screw good any one knows what's going on ???

[@MrFacproductions]

Should the slide fully bw closed on no throttle sorry this what I'm struggling to grasp? Ahah

[@sayblaze]

I replaced my carburetor it start up on full throttle without me even touching it

[@klasmova2771]

@@danl5632 possibly air leak, check o rings and seal or idle screw/throttle cable is not adjusted right

[@danl5632]

@@klasmova2771 I will do that. Thanks.

[@sayblaze]

@@danl5632 no I try everything it cut off now and won't start back up

[@danl5632]

Found the problem.The stock throttle cable is a bit short for the nibbi carb.the carb slide wont go down as far as it should. So I just put back the stock carb for now, til I get a longer throttle cable.

[@JoseZavala-we4mb]

Mine starts up when I put it in run it goes into full speed I tries messing with the idle screw but does nothing it has orginal carb I rebuild it it was working good

[@yoilara2014]

Boutta go see if this will fix mines stuck wide open 2 times first time kinda fixed itself this time shure won't 😫

[@titantiger3403]

Did it fix it

[@r6liam657]

I got a pw50 I'm working on for my nephew and I changed the throttle cable etc an the throttle doesn't retract by it self i have to pull the throttle back myself and only thing I can think of is it doesn't have the oil pump on it an when you pull the oil pump cable it puts tension onto the throttle cable but I know people remove the oil pumps on these but don't know if they have this issue or if there's a way to fix this issue without the oil pump

[@ANDREWS7523]

Has the same problem thanks

[@akthethotboi9711]

I seen that happen with a ds80

[@starbound6287]

thx

[@thompsonbrian8791]

My bike tried to kill me speeded up on its own 😂holy smokes I need a kill switch had to reach down and turn it off 😮😅

[@Tj-km7ps]

How did you turn the bike off without a kill switch bro?

[@dontlookatme8323]

​@Tj-km7ps probably forgot to turn the gas valve on and it ran out of gas

[@walterandrews3077]

Never, never, never ever sand anything in or on a Mikuni carburetor and never replace a Mikuni carburetor with anything but a Mikuni carburetor. NEVER EVER!