Pylontech CAN emulation using a python script (DIY battery pack)

Useful script to make a hybrid inverter think that your self made battery pack is a Pylontech one. This should allow you to use any battery pack that you have designed with many hybrid inverters which support pylontech LFP batteries. It has not been tested with an inverter but the information send should be correct. Modify it at your own needs. I no longer support this since I do not require it any more and can not test it on real hardware. Of course it requires a raspberry pi (or a linux machine) plus extra hardware to communicate via CAN.
github.com/jua...

[@dieser88]

Hello friend, could you help me install cantools, I am working on a linux ubuntu 20, but I have not had success with the installation

[@ulynieto6918]

Hola Diego, que hardware canbus usas para conectar con el inversor??

[@sebastienmeunier6024]

Bonjour, merci pour ton projet, je vais tester avec des batteries plomb gel et un bmv712 je partagerai mon travail si cela vous intéresse. Je vais tester sur un me3000sp (Sofar Solar)

[@dreamworker4951]

Bad !