#PZEV

The dreaded PZEV sealed fuel tank: At a cost of around $2500 + labor, if you have an older Benz with California standards, then you better start weighing your options. Most will junk their cars. For a $100 or so, I got Blu back on the road with a new fuel pump.
#PZEV #MercedesBenz #fuelpump #Californiaemissions #sealedgastanks #PZEVgastanks #fueltank

[@austinbravoaldama3990]

Tham, having the same issue with mine, hoping is not the PZEV since I already changed a bunch of crap on it not knowing that the fuel pump was not working. Other than that you handled it and took that project like a true professional. Thanks for the vid and the positivity bro. Keep it up 👍

[@guaysonian1]

Thank you for this amazing explanation on how to do it yourself thank you again I hope I can do it!!

[@luisvigil5351]

Thanks for video I just finished installing exact fuel pump. Assume video

[@billyjefferson1995]

Thx for showing me how to get this done on my 07 E350. I did extra what u did. Ordered the motor for China. It took about 2 weeks to get to me. I couldn't drain the gas out of that side, because it has a saddle tank. When I cut the hole with a 5 inch hole bit, I used water to keep the bit cool, because I don't want to do it without doing that. Can cause a spark and blow u up. Then I used a 7 inch circle bit to cut the plate to cover the hole. With the motor from China, I had to modify it alittle, because the filter wouldn't fit exactly. I cut it down with an exacto knife and use jb weld. It worked perfectly. When I placed the plate on, I used jb weld around the the inside edges. Placed that on the hole and then used self tapping screws. Then, used more jb weld over the entire circle where the jb weld over the seld tapping screws. When I ordered the part, it she number that is on the bottom. Type that number in Google and the part will come up, but only with international company. I think I found the entire part at Walmart for $49. It was alittle different, but I think kit will work. The connectors on top is different, but everything else is the same. I think it will work. When u have to soder the wires on top is different. I hope this helps everyone. It worked for me and saved thousands . I used a parking sign I had at work for the plate. Worked great and it's thicker. Good luck everyone.

[@darealbigdady]

Hey This was a Game Changer!!! Followed the directions and whoop there it is!!!!

[@guido764]

I want to thank you very much for posting this video. I was able to find the actual motor part number that's stamped on the bottom, not the one on the side. The part number is A2C53015091 and VDO makes the one I got shipped in under a week from Europe for $40 +$50 shipping so exact part identical configuration with a 2 year warranty for 90 bucks and some time vs $3800. It seems like this motor is used in many vehicles in my case it said it was for a Fiat Panda. But it's the identical part to what was in mine. hope this helps

[@MiamiMostSwaggest]

If possible can you attach a link to which one you bought?

[@Yggdr4s1l]

hey guys if you do this, be aware that your drill has sparks in the brushes. so i set up a fan to blow out any fumes, not an issue till you break thru the tank. be careful.

[@darealbigdady]

I found the pump. followed the direction. Just waiting for steel plate cover to be delivered.

[@MiamiMostSwaggest]

How did it workout for you? If possible can you link the pump you bought?

[@bigD1988]

I'm a master mechanic of 25 years myself

[@user-zy1xi2pk7i]

I really really appreciate the video I've done everything except by the pump can you please let me know where you purchase the pump at I also have a '07 Mercedes E350 PZEV

[@user-zy1xi2pk7i]

Just would like to know which numbers you use to order the fuel pump and who you purchased the Deko fuel pump from thanks

[@AMG_LA65]

What’s the part number on the new pump can’t find one

[@jackchao2143]

I did the same thing to my 2006 E350 PZEV.

[@user-uv2fd9kq3f]

Can I send u my tank in u fix it and I will pay u for the work

[@user-zy1xi2pk7i]

I also did the same thing for my 07 Mercedes E350 just today trying to find the number to order the pump who did you purchase your pump through

[@draymondgreen7606]

Hello where is the gas hand float on that fuel pump / or tank located

[@matthoyt5138]

I'm dealing with same problem can u tell me what saw size and where u get the pump

[@kmk42howard1]

I’ve owned this car 8 years waiting for a solution

[@ponce8174]

What's the part number brother please I'm going to fix my benz 2

[@nasserqahwaji1779]

Hello , amazing idea 💡 but PLEASE , is it 6 or 5 inch for the hole saw 🙏🏼 Thank you

[@pedropr1sr1]

Great video. I just replaced my pump on the same PZEV w211. I have a very small amount of fuel seeping out of the cover I installed . I used a thin gasket What type of gasket did you use under the metal cover?

[@Itsdicemoney]

You are definitely first on YT

[@alexmartinez853]

My brother, this is the only video on the Inter that offers a reasonable fix. I am having. The same issue. Where did you get the replacement pump?

[@adriannyasia]

I got mine from Ali Baba, but any regular C240 of the same yr. or so has the same pump motor. If you follow my instructions, it should go fairly easy. Honestly, it was a really easy job.

[@alexmartinez853]

Thank you bro. I got an estimate for 4500$. This will def help

[@adriannyasia]

Yup, that's about right! They're sick for that! Car's probably not worth that cost. Less than $100 is what I spent on everything. @@alexmartinez853

[@sergggtor]

Thanks! Do you have link ?@@adriannyasia

[@adriannyasia]

I’d have to check. I don’t remember, but like I mentioned on another comment -the C240’s pump is the same. Order one for that car and pull out the pump. @@sergggtor

[@latetachupon1353]

Can you tell me how to get the pump

[@rsaautomotive314]

Can you please let me know where did you order the pump or give me the part number.

[@user-ii3vz6wq4n]

where did they gey the bom my bom is pzev the brand is deko fuel pump

[@DaetahgeLemons]

Easily the vest video on the subject, gotta change the name so it can be found Easier tho

[@MiamiMostSwaggest]

When you replaced the fuel sending until/filter, did you replace just the unit and reuse the old hoses that go across to the other side (fuel pump)?

[@user-zy1xi2pk7i]

What did you use to cut the hole in that side of the gas tank I have that same Mercedes 07

[@adriannyasia]

It’s in the vid. A 6” hole saw

[@billyjefferson1995]

5 inch circle bit. And a 7 inch to cover the hole.

[@darealbigdady]

what is the fuel pump motor part number

[@ExclusiveAutoImports]

can you give details on the deko fuel pump you used? Thank you!

[@adriannyasia]

Actually I ordered it off of AliBaba, but a C240’s fuel pump (of the same yrs.) is the same type of pump.

[@annamaniquis2773]

Also what did u use to cut open the tank part

[@adriannyasia]

It’s in the vid. 6” hole saw.

[@kmk42howard1]

He said 5 or 6

[@user-uv2fd9kq3f]

Can I send u my tank in u fix it for me and I will pay u

[@Sustainable-living1998]

So any c240 will work for the vehicle???

[@adriannyasia]

I would pull out your pump first and then compare them. Reason why I know that a C240 and the like will work, is because I compared them at my local junkyard

[@Sustainable-living1998]

@@adriannyasia when you drilled the hole did you get the gas out or just drilled it?

[@annamaniquis2773]

What did u use to seal i have the same problem

[@adriannyasia]

its in the vid. I used black RTV sealant and regular gas resistant gasket paper. Cut the gasket paper into a ring the size of the new cover. No need to cover the entire hole, just the edge of the cover that overlaps

[@billyjefferson1995]

Self tapping screws and jb weld for.gas tanks. Amazon.

[@user-nq2sz8ys4t]

Tengo un auto con ese problema m.pasa direcciones su taller

[@adriannyasia]

Adonde estas?

[@ponce8174]

Where do you live bro?so you can fix mine $

[@robertnazarian8388]

is it possible thank blowup

[@adriannyasia]

Drain the fuel out of it

[@robertnazarian8388]

is that a special sow

[@billyjefferson1995]

Circle grill bit. 5 and 7 inches