Q ERECT9R | Modular 9mm Silencer

[@SUNDAYGUNDAY]

TS19 barrels are now 40% off! Cheapest they will ever be so head to DCA and check em out 🏴

[@Everything2A]

The big question I have is can you put this on a 300 blackout AR if you only run subs through it? Obviously supers would blow it up but I wonder if subsonic 300 blackout is low enough pressure and similar enough the 9mm that it would work.

[@b_smith_]

I’m surprised you didn’t say that you were baffled by how quiet it was 🤣🤣 missed opportunity. Great review. Can’t wait to get my first Q silencer one day.

[@ezmudder7471]

WOW!! What a super cool and sick modular unit. Very impressed. Great job on the video as well! I really liked the step sequence to get a true appreciation for all of the module configurations... Great job all around!!

[@armenchuck]

glad to see you are still putting out videos, you don't come up in my KZbin anymore. I just turned on your notifications again for the multiple times

[@sheldontorrence]

The intro is everything

[@alishmaalexander7339]

That was badass how you started the video. Outstanding

[@Leethal1]

Great intro Talon! You can really hear the difference when you string the footage together as well as you did!

[@jpj6780]

Does it come with direct thread? I imagine you wouldn’t need the decoupling device when you get down around 4oz.

[@glisson3385]

first time watcher and that intro is killer

[@CREEPINGIRON]

This will go well with my P365 project I've recently conceptualized.

[@philliphurst106]

What hearing pro is that? I need something small like that but everything I try doesn’t work that good

[@adamwarren5654]

Waiting on someone to buy 2 of these and put them together

[@axmnstrbnd]

Use a shorty barrel on an ar9, put 2 of them bad boys together under a full length handguard and basically it's like an integral barrel. That would be a sweet set up!

[@lentztu]

Demolition Ranch did even better than 2!😁

[@fabiovega7955]

Sei: silencer my brain: light saber

[@ianroberts5683]

I just got an E9 and everyone I've shown it too have said the same thing lol

[@19jessier95]

Most gun companies with a threaded barrel option on their handguns will send a second (lighter) spring. This helps weapons cycle with the lower pressure loads, because of the reduced blowback. I had the same issue out of my M9A3. Switched to a lighter spring and it runs all rounds without a stop pipe, or failure to eject.

[@SalehMagrabi]

Thanks man, you did a great work in this video.

[@Rhanley150]

Thank you for the video. First time watching your channel. I just got my Q Erector 9. Looking forward to my range time. Just a note about the 147gr ammo you mentioned. I have always used Winchester Ranger 147 gr T series. (RA9T - is the code on the box). This ammo has never let me down. It is a hollow point and therefore more expensive. For training I use Speer Lawman Handgun 147gr. That ammo has never failed me either. I shoot those two brands in all my pistols. For full disclosure I am not a Glock guy but I stand by the suggestions. I hope that might work for you if you decide to try it out. To each his own however and again thank you for the video.

[@RICH21716]

Great video... love the intro

[@d-unit-outdoors]

That’s good info though. Having just the blast baffle (or maybe +1) might be ideal for home defense.

[@bobxoneill]

Wish you could run a sound pressure meter in the lower corner of the screen with each baffle; it would make it easier to understand the changes in sound

[@officialcxmatxse7853]

I’d love to see a dB reader on a 9 baffle setup! It’s “movie quiet” 😩

[@simpleflipR6]

Depends if you’re using a 147 grain or less lol it does jam more at 147 but very quiet

[@gscop1683]

I just got my Q 22lr modular. Using it with my Ruger Charger.....Holy Crap! How does Q do this?....In 22LR it is also very affordable!

[@ShaunJaySays]

I literally just seen this today at my LGS now I need to head back up there before they close 😂

[@hunterdoc23]

HE'S BACK

[@josh9455]

I would like to see it work on an AR-9! That would be cool as hell!

[@mikeyincalif]

What brand was the ammo you used that had so much problems ? I want to stay away from it. Thanks

[@dannypierce9528]

Are you shooting subs in these very small conversions of the suppresir

[@1987jaac]

Make Sunday Gunday Great Again!

[@JAgnew]

That's unpossibly quiet! 😁 Awesome vid and not surprisingly, another great Q product 💪🤘🙌🤙

[@lesgarten]

@SUNDAYDUNDAY how did the diameter work with the optics? Were you able to see the red dot or was it blocked by the can?

[@philknut9573]

🤯 Incredible! LOL the steel is louder.

[@MaximGhost]

Do the baffles have the industry standard 1.375x24 thread?

[@franciscoroman5171]

I'm in the market for a one would you recommend this or the omega 9k ?

[@la2123]

Can moly grease help to ease taking off all the caps?

[@rickylafleur9601]

I could see a special operations soldier carrying a few suppressor baffles simply to quiet the gun a bit and reduce muzzle flash.

[@thewhiteknight02]

What’s the actual Db? That was very quiet, hope they make grey or black. What’s the pricing.

[@user-ep3pv8fw3m]

Nice Now I'm waiting for a tank suppressor to go stealthy boom boom

[@pjreynoso15]

Will this work with 300 blackout?

[@LordHolley]

Packaging? Seriously, who really gives a crap about packaging? Do you keep the packaging? I'm not keeping it, and quite honestly, I'd rather have the price of their product drop 50 bucks and send it to me in a paper bag. Something tells me 99% of the people buying one would feel the same. Maybe if they didn't have to worry about packaging, they would have them in stock someplace, and I could buy one of these damn things, LOL.

[@rescueca89]

I care about packaging. I want a company that takes pride in its appearance, and care in shipping/stocking protection.

[@kungfupandas1]

It's part of the marketing. People will buy a product they are unfamiliar with if it has slick packaging. Think of anything you've bought from the grocery store that you haven't heard of. Apple has slick packaging and people buy that product.

[@IrvingMagik]

Would this work well with a Sig MPX K?

[@adamrobbins2091]

Polish the barrel feed ramp, i shoot 147g from 43x griffin barrel/can. Polished the feed ramp to almost mirror not one prob

[@vjallen75]

Does this come in black?

[@deronderohn2377]

What hearing protection do you use?

[@SUNDAYGUNDAY]

amzn.to/3hr8qi9

[@forwardflash100]

Intro clip got me good! Hahaha

[@armenchuck]

I recently received my tax stamp for my Erector 9 was thinking about rattle canning it black. Any thoughts on how this would work? having a suppressor cerakoted can be tricky because of the ATF forms involved thanks for any replies in advance!

[@fishfleshfowlforage7969]

Cerakoter here. First of it should be common sense but do not rattle can it. Second find a local applicator, and just talk to him about “hanging out” while he does his thing. Suppressors are just sexy, and a coated one will do his portfolio good. He may work with you and let you hang around the shop. Or the other option find an FFL that has cerakote services in shop. May be out of state.

[@armenchuck]

@@fishfleshfowlforage7969 thanks for the reply, your suggestion has been my plan of action that hasn't worked yet

[@Sam_of_Anarchy92]

will you be spraying the suppressor black to match the gun and its pretty cool that its interchangeable

[@tspice11]

No need they just released black

[@grantjones199]

What earplugs are you using?

[@AllegedGamer]

What kind of eara u got

[@EggyShmeggy]

Thats hard to beat

[@brandongarcia3328]

What ear pro??

[@SUNDAYGUNDAY]

amzn.to/3hr8qi9

[@mrrobot-jo1tu]

Thing is so sick

[@xzait123]

love ur videos!!!!

[@seanwieland9763]

Similar design to Lone Wolf’s Elimin8r.

[@NateJ0011]

jacket?

[@SUNDAYGUNDAY]

www.vertx.com code “talonsei” to save some bucks.

[@StevenV2]

I want a blk one but dont wanna back order

[@Kycirion]

Just because your ears aren't ringing doesn't mean it hearing safe, especially with long continuous strings of fire. Even 135db over time will cause permanent damage. Plus if the 2 baffle configuration seems hearing safe you've definitely already had significant hearing damage.

[@gregz4249]

Huh

[@kenttresler6350]

Your vertx discount code is only 20% off not 25%.

[@brianrmc1963]

Oh man! I wish we could use suppressors in California.

[@The_John_Galt]

I was hoping it would keep growing to ridiculously long

[@jarvisrutherford289]

Defeated algorithm

[@Justifiedforce]

I think there should be another ts43x drop

[@scottlawrence1826]

Dang! I wanna give her a spin!

[@StephenShreds]

Let’s go!

[@jr.triplett1620]

Dope!!!

[@ZXNTV]

Looks like something outta starwars

[@ZXNTV]

Also hehe "erector"

[@therussianbear6900]

Do you really "need" the snorkel on your truck?

[@SUNDAYGUNDAY]

Do you really “need” anything in life?

[@l.s.451]

Honest Outlaws twin?

[@urbanalbino619]

🔥🔥🔥

[@ryanmcgurk1750]

shoot some quality 147 out of the shortest configuration to see how quiet it really can be

[@simpleflipR6]

Very quiet but jams more often no matter how you configure and which ammo. Works well with lighter grains

[@woodlandreconjoshdrakes5509]

I just understand!!! Its Q voodoo magic

[@philsterlingphils1754]

Looks like sig modx

[@nomaskmike9146]

I like it at 7 baffles

[@TxchPlays]

Makes same sound when u bust 🤣

[@va05sti]

😍😍😍

[@bluelwood]

nice modular unit but that color is going to show stains and look dirty in a hurry needs to be black 🖤

[@4gottenWarriors]

One baffle and a wet wipe and dry

[@davoncorrie63]

Erector 🤣

[@thechadmg]

Is anyone else having problems with their Erect9r? I have a new Erect9r, one of the first in black, and I've sent it back for repairs twice now. The first time was damage (a baffle strike) to the cone and edge of the cone of each baffle. They were responsive, sent it back fairly quickly, and took care of the shipping. The second time is for the endcap blowing apart. This was just after getting it back from the first repair and was only about 100 to 200 rounds run through it. Now they don't have endcaps and it will be about 6 to 8 weeks minimum to get it back. Even worse now is that the whole thing needs to be sent in for repairs. so if it is lost in the mail, or stolen, there will be negative ramifications for future NFA purchases. Also, they don't actually manufacture these, someone else does, and they just assemble them.

[@nickolasthefrog]

Could be your barrel, if you didn’t send it in when doing the warranty work.

[@thechadmg]

@@nickolasthefrog thanks for input. I actually had the pistol manufacturer do an inspection/test of the pistol and everything checked out. Q was awesome in their review/feedback and I now know the booster assembly needs to be torn down and cleaned quite often. I don't actually use this anymore (it's in the night stand w/ only 4 baffles for home defense) and now use my Sig mod X 9MM on a CMMG Dissent Mk G for my private range.

[@nickolasthefrog]

@@thechadmg That does feel like a short maintenance interval. I’m otherwise in favor of suppressing everything but keep finding reasons like this for not getting a pistol silencer.

[@thechadmg]

@@nickolasthefrog Totally agree with you. My Q Erector 22LR is on a Ruger Mk IV lite and I haven't cleaned that suppressor yet after a few thousand rounds. My Sig mod X hasn't been cleaned yet after a few thousand rounds, this is on my CMMG Dissent. I have a DD ISR, and I have no idea if it is even user serviceable, and that's also had a few thousand rounds through it.

[@nickolasthefrog]

@@thechadmg very cool. Ecco ocelot micro on chopped sw victory 22, sico Salvo 12 on ks7 (sometimes rem 870), aac jaeger30 on parts build ar308, and griffin optimus micro with a bunch of muzzle devices.

[@gregz4249]

I have to keep it hidden from my wife

[@la2123]

Why, does it look like a dildo?

[@thatguy3139]

You mean baffle strike 9 💀

[@rodiculous9464]

Its not really fair to call it hearing safe just based on your own subjective comfort level. Your ears might be shot. Suppressor does look nice tho.

[@matali6067]

Why is this erection silencer looks so ugly?

[@davidhill492]

Ugliest silencer ever..

[@karolpravica9926]

Too much talking.