Q7 and Touareg blower motor replacement

[@mycrazyhat2]

Mate can’t thank you enough. You’ve just saved me $875. Even as a novice it took me only about 30 mins. Other videos stated having to take the glove box out and so glad I followed your instructions 👍

[@jermainecastleberry4002]

In hindsight I probably didn't need it because this one is really simple, It was difficult on the Citreon I did it with previously was my only experience. This was really straightforward and this video guide was both helpful and well explained. Thanks!

[@pauls4074]

Thanks for the video. After being quoted over $1100 by VW I replaced it for $180 and 1/2hr work. Many thanks.

[@Mattkm89]

Thanks for video i changed mines following your steps took me about 25 mins

[@gracefilled3055]

The hubby thanks you very much for this helpful video!

[@bed28391]

Great step by step video. Very helpful!

[@odanne29]

Good video, Whats diameter of the blower fan?

[@dalejordan6057]

Excellent job very helpful thankyou

[@bumbleshufflesdiy5908]

Great video and easy to follow. Many thanks for this clear guide.

[@Vivi-bn5cm]

Great video shared 👍 My B pillar air vent doesn't have much air coming out even on the max. Does it help by replacing the blower motor?

[@karlhatcher9029]

Spot on video saved me so much time thank you very much

[@mnnaqs]

Great vid replaced mine but the blower is not turning off nightmare even when the car is off keeps going strong

[@airmaxfrank9175]

Oooh that easy 👍 I was already Stressing bout tha A/C going out🤦‍♂️

[@luizfernandodocarmo2800]

Hello, I'm from Brazil. Firstly thanks for the video. I have a 2012 Touareg and I can't find this part in Brazil. Could you share the ebay link?

[@busdriver-elmax]

Thanks. I have replaced it very easy. Thanks for your video.

[@Cpew123]

Great video thanks mate, I just did mine and it’s been done by a previous owner also and there was only 3 bolts instead of 7… where would I be able to locate 4 more to complete the new one please?

[@hwil09]

The hardware store 😂

[@maxnoize1319]

Hi . Could you let me know how to remove the fan . I have a extra blower fan . But the bearing is broken . I wanna take our the carbon brush and replace it

[@sparkyire1983]

I did that a few times but it’s very difficult to get access to the brushes. The fan blades are plastic welded on to the motor shaft. It’s much easier just replace the whole blower motor assembly. The part is relatively cheap on eBay.

[@maxnoize1319]

@@sparkyire1983 hehe . I was waiting for your reply . But I did it . It was pretty difficult. But at the end of the day I have a cold AC blowing on my face . And yes I live in Qatar it gets pretty hot during day here . Despite all difficulties its all worth it. Thanks for replying though .

[@carlotai4635]

Hi , how did the eBay hold up after a while of use and would you have a link to the one you bought please, good video too.

[@sparkyire1983]

It’s still working great 20k miles later. The link is no longer available but I’m pretty sure they are all manufactured by the same Chinese manufacturer.

[@carlotai4635]

@@sparkyire1983 thank you

[@colinkensley]

Great video thanks for sharing

[@halcoy4373]

I hate buying tools for one use...do you know if a ⅜ ratchet and drive would fit? or is it too wide..many thanks!

[@sparkyire1983]

Yes it will fit. You need a long extension and 7mm socket on it.

[@halcoy4373]

@@sparkyire1983 Many thanks!!!!!

[@woodvineandco]

Working on a touareg, it seems to be rubbing on something I can't figure it out.

[@redzeroiceman9297]

is it still working

[@sparkyire1983]

It is. I’ve put over 70k miles on the car since making this video. Still working perfectly.

[@MrTeslaX]

Hey bro can u help me with something?

[@sparkyire1983]

Go ahead lad..

[@liamobzr]

Video says it’s a 5mm socket when in fact it’s a 5.5mm socket 👎