Qanba Drone Mod Upgrade - Sanwa Joystick and Buttons

[@memecity6722]

This channel with nihongogamer are the best when the subject is modding and arcade sticks review

[@JoystickNY]

Meme City thank you for the kind words 🙏 thank you for watching ❤️

[@stevennunez9818]

I agree. Can't wait for a crossover video 😁

[@JoystickNY]

Thank you for the support ❤️🙏

[@rockk78]

I'll be trying this mod by the end of this week.

[@JoystickNY]

Enjoy my friend 👍

[@alexnostalgix]

So nice to see progress with each video

[@JoystickNY]

Alex Nostalgix thank you brother 🙏❤️ the more videos i make, the more appreciation i have for the video, film, production industry.

[@Douphipp455]

Nice tutorial as always JoyStickNY. When I did my Sanwa swap I actually opted to use the quanba switches and qanba wiring harness on the Sanwa JLF since my Sanwa switch board was pretty old and in need of a replacement. It is kind of a pain to get the switches to sit on the Sanwa mount and get the gate on without one of the switches moving out of place, but once it's all set with the gate on it works very well!

[@JoystickNY]

Nice 😊 i am going to unscrew the qanba lever and mess around with it, maybe i ll do a compare video on it in the future 🙏 thank you as always

[@HK-42069]

Thanks man! Just saved me some time & money with the seimitsu lever warning. I love your channel, it really is the most informative one out here.

[@JoystickNY]

Obese-Juan Kenobi thank you, thats my goal, to fill the tiny gaps in these topics, i ll let the other big guys do the big news 😂

[@aquilesnake]

thank bro I buy one Qanba Drone in 38 dollars (used) and buy sanwa stick cost 30 dollars more bottons 25 dollars and now have full sanwa stick for 85 dollars and new component

[@JoystickNY]

Enjoy my friend 👍😊 sorry about the late reply

[@armoredcoreenjoyer]

Thank you so much for making this video! Sanwa feels so much better. I probably would've had to take it apart and put back together 5 times if it weren't for you. I love your videos. Such good quality, and you make everything very clear.

[@JoystickNY]

Appreciate the love ❤️🙏

[@cookiemystic2598]

hello just wanna ask are sanwa buttons kind of loose in their button holes? and do they really feel better I bought some recently and they're kinda loose I haven't used them yet but they seem less... tighter? than my old qanba buttons

[@euras7397]

This video really helped me with choosin' my first stick without payin' hundreds of dollars for one of those high end ones. Wasn't plannin' on switchin' out the stick so early but was glad to know it was so easy to do. Snagged one of these off amazon but the stick felt really... stiff? I guess is the word? picked up a Sanwa replacement and a bat top instead of the ball and plopped 'em in today and omg it feels SO freakin' nice... kinda wantin' to do the buttons next to swap out the all black stock ones. So thanks for makin' a really easy to understand video for a joystick nub like myself =)

[@JoystickNY]

Thank you ❤️ i am glad you are enjoying the stick, keep it up, and no rush to change the buttons, take your time; there are so many options to explore

[@xcastruckeysquad3373]

hopping to get this as a starting fight stick for ggstrive, and im glad to know its easy to mod the stick (the square gate on the base one is the only thing i was worried about)

[@JoystickNY]

thank you for watching 🙏❤️ don worry, i am here to help 😊

[@SCDADE]

Thanks! Received my Drone yesterday and my Sanwa will be in Friday. Needed it for the 4 way gate to play Ms PAC-man.

[@JoystickNY]

Mike Parks nice stuff 🕹 enjoy my friend 😊

[@zlecram]

Thanks to you I was able to FULL mod my joystick to Sanwa! Greetings from Brazil!

[@SlayerSuch]

Love your videos, I hope your channel grows well

[@JoystickNY]

Gun Fighter thank you 🙏 i love your cute profile pic 😊

[@HeroOfLogic]

I finally did it. It took me a lot longer since I'm not good at it like you are, but this video was very helpful! I know this will up my gameplay by a lot, so thank you very much.

[@JoystickNY]

HeroOfLogic very happy to hear that, glad it helped ❤️🙏

[@rockk78]

I just finished a full mod with a Sanwa JLF joystick and Sanwa buttons. Why can't all joysticks be this easy to mod??? I should've had this stick a long time ago. Great video bro!!!!🙏🏿🙏🏿

[@JoystickNY]

Thank you, happy to it helped 🙏❤️

[@PremonitionGamingVid]

Finally bought this and i'm going to use the black sanwa kit with the 5pc wire to do this. Thanks a WHOLE TON for this video!!!

[@JoystickNY]

Happy to help my friend, enjoy it ❤️🙏

[@PremonitionGamingVid]

@@JoystickNY it's a lot smaller than I originally thought it would be, i'm 6'6 is there any bigger stick you would recommend that is modable, I already bought sanwa parts and plan to use the qanba body in the mean time.

[@JoystickNY]

The hori rap4 is the great long stick, is the one i use daily. U can check that out, its around 150$

[@jonathonjones2611]

With the help of this video I just completed my first arcade stick mod. Love your channel bro.

[@JoystickNY]

Nice 👍 happy to hear it helped❤️

[@silvydb]

Alternatively what you can do for tight connectors on the buttons, lightly grab the top of the sleeve with a pair of pliers and you can wiggle it off.

[@JoystickNY]

Great advice thank you

[@silvydb]

@@JoystickNY right back at you, i didnt know the drone was so easy to mod

[@enemybmp]

Thank you, the lever had not "survived", the SF6 Beta and there came plastic out of the case, when i watched into the stick. Saved me a lot of money instead of buying a new arcade stick.

[@DarwinAlcazarArt]

Thanks man! Gonna bookmark this vid for when I upgrade my drone

[@JoystickNY]

Darwin Alcazar thank you 🙏 glad it was helpful ❤️🕹

[@Mentallyuntouchable]

Hey I love the video man. I feel like there's a lack of instructional videos when it comes to modding arcade sticks. In the future do you plan on covering stick mods? Such as the golden fanta mod kit or springs/actuators? It's something that I don't really understand.

[@JoystickNY]

Vincent yes, those are in my time line, further down the road, i have a lot of videos to makes and not enough time to make them, its going to be a bit slow for now 🙏

[@HoshMyTots]

I just had to open my qanba today and switch some buttons around, thank you so much for making these videos you're a genuine life saver!!

[@JoystickNY]

I am happy to hear the videos helps, thank you for watching 🙏❤️

[@josep21011]

Snapping in New button's sounds so satisfying

[@ArtySh00t]

Nice vídeo man!

[@JoystickNY]

ArtySh00t thank you so much 🙏❤️🕹 thank you for dropping by

[@ricluvno304]

I put in the Sanwa joystick and yellow Sanwa buttons. I want to add a small Wu-Tang Clan vinyl sticker and I'm done.

[@JoystickNY]

That would look fire 🔥, 👍 this is great stick. Handy and light, can bring it everywhere

[@riquelmeneymar5515]

@@JoystickNY oye se puede jugad en un celular android ???

[@FelipeFurlan1990]

Just modded my drone while watching your video, helped me alot, thank you so much ❤

[@JoystickNY]

Glad I could help

[@BowmansWorld]

Love your content so much man, please keep up the awesome uploads!

[@JoystickNY]

BowmansWorld thank you 🙏

[@JCOLD55]

This was actually super helpful, thank you!

[@enriquetorres699]

Watching your channel (currently using a keyboard) made me get interested into getting a stick. These videos are really helpful so I can make an informed decision to get my first fightstick. Thank you so much!

[@JoystickNY]

Thank you so much, i love keyboards too, used to play alot of emu and kof ❤️🙏

[@enriquetorres699]

@@JoystickNY That's great, I'm also playing KOF :D

[@ranelopeturner8667]

Bro Ty for this tutorial, I actually fix my stick because of this

[@JoystickNY]

Happy to hear 😉

[@RJS7YL3]

Very nice and clear understanding detailed guide 😍 loved it . Thanks

[@JoystickNY]

RJ style thank you ❤️🙏

[@kyleandrewtong2843]

Nice modding video. Hoping for another one with RAP N.

[@JoystickNY]

Kyle Andrew Tong i will add that to my list of videos to make 🙏🕹 thank you for dropping by

[@lilmister]

Thanks for all the videos! It's been helping me a lot! I bought a Drone as my 1st stick & I'm very happy! So the hardware besides Stick & Buttons, how important is it? Will I "waste" my full Sanwa upgrade on a cheap drone? Or would it be better to pimp a more expensive stick? I'm spending about the same amount off cash on upgrades as I did for the stick.. So any clarity would be nice, thanks! also would LED buttons work with Drone?

[@JoystickNY]

The hardware is great; yuyu is a sponsor pro player , and she uses the drone in tornaments 😊

[@da_masterdudelol666]

Bro ur videos are professional level at it max rn keep up the good work im 15 and thinking about getting into fighting games do you have any tips

[@JoystickNY]

Da_Masterdude Lol i think its just playing a lot and practicing, its one of those things thats hard to learn from a video or watching, the more you play, the more games you lose, you will slowly pick up on the games 🙏❤️ and thank you for the kind words, welcome to the channel

[@sammystipsandtricks6338]

Lol I want to get these sticks soo bad but I live in india a stick here costs literally 70000 rupees which is about a 1000 dollars but amazing content bro good job...😀😀😀💙

[@JoystickNY]

Dang...Thats crazyy, thats the price of a phone, computer and 2 ps5

[@sammystipsandtricks6338]

@@JoystickNY yess thats why i cant purchase ill purchase it from dubai i think its cheap there....

[@Luminent05]

Thank god for this tutorial!

[@JoystickNY]

thank you for watching 🙏❤️

[@Luminent05]

​@@JoystickNYthank you sir, so detailed i did it on memory

[@unancien6250]

Still using mine on my ps4 Upgraded with Sanwa Can’t wait street 6

[@shibiqo3797]

Thanks for this, Im going to get the This as my first arcade stick

[@Themrmigue]

wow, 1 minute in and im already loving the vid. thanks!!

[@JoystickNY]

Appreciate the love ❤️🙏

[@ClaudeFFT]

Great tutorial, thank you!

[@JoystickNY]

Claude thank you for dropping by, hope it helps ❤️🙏

[@kbosher1]

Great video! Thank you for the breakdown and step by step vid!

[@JoystickNY]

Thank you for watching 🙏❤️

[@bandersong4650]

I made the mod thanks to your video and I saved a lot of money

[@JoystickNY]

Happy to help 😊👍

[@WELLFIGHTER]

Amazing Mod ^^

[@JoystickNY]

WELL FIGHTER thank you as always 🙏❤️

[@KILLCHRISU]

i don’t know if you’ll read this but thank you so much. i bought my drone not to long ago and the stock parts are okay but they feel a tad flimsy for me. thank u x100

[@JoystickNY]

Thank you for watching 🙏❤️ once you get more familiar with the stick, maybe upgrading the parts 🕹 it should be more smooth

[@DazeEspi]

Thank you for the video brother. I have this same arcade stick and the stick was all loose and messed up and so were some buttons and I thought that I would need to buy a whole new arcade stick. I just purchased a Sanwa and buttons and that cord and looking forward to hitting up the FGC once more. Take care and thank you again

[@JoystickNY]

Thank you for the support 🙏❤️ happy to help 😊

[@SaucyFGC]

Awesome video, gave me everything I needed to mod my drone. I subscribed, thanks for the great content.

[@JoystickNY]

Thank you for the support 🙏❤️

[@Chickenthoefvola]

Good stuff I learned how to dragon punch without always going into super from this channel!!

[@JoystickNY]

Yay, 👍 i am happy to hear the videos help ❤️🙏 thank you for watching

[@rxzero00]

It took me forever to remove the ball top off of my Qanba Q4 RAF with the flat head screwdriver as the threads were basically stuck together and the buttons were just as hard to get out. I couldn't remove the quick release from the buttons and I couldn't do it with the flat head screwdriver but I managed to use a pair of pliers to wriggle them out with some force. After I remove the parts and put it back together since I just wanted to see if I can remove them, I find it easier to remove the connections as I see fit. I think it's the age of the parts as I got the stick used. Luckily I don't really need to mod the stick as it already has Sanwa parts and connects to PC out of the box. I do intend to change the artwork when I get the chance.

[@JoystickNY]

rxzero00 you can also loosen up or widen the metal connection, its must metal and its designed to be bent. That way in the future you can just use your hands to unplug them 🙏 thank you for watching

[@Moe.Essam93]

thank you! you are very helpful and clear. I wish I have known about your channel earlier

[@JoystickNY]

Thank you man 🙏❤️

[@31IVI3jZ]

For some reason I had to connect the jlf connector to the adapter as opposed to skip that and go straight to the board with the 5 pin. Idk why I mean it works just a lot of wires there

[@JoystickNY]

Ned Stark if it connect and it works, it should not be a problem, if you have time, maybe take out the extra parts, sometimes go pass too many wires can add delay to a signal. 🙏❤️ thank you for watching

[@haidangben5015]

You should do more video like analysing characters and reacting to reveals trailer, I know this channel main focus is on fightstick but I thinks it's cool to switch up the content from time to time.

[@JoystickNY]

Thank you for the advice, i thought about those too when i first started, i do have some diff content coming soon, and i am also waiting for the new games to come out, kof15, gran blue fantasy vs, guilty gear strive, i will probably have more game contents, i feel that the current games already have enough people covering it, and most characters covered already. Thats why i figured let me get these videos out first before those new games release. 🙏❤️ and thank you for dropping by

[@haidangben5015]

@@JoystickNY I really appreciate creators like you who interact with their audience, thank you for replying to my comment. Keep up the good work man!

[@JoystickNY]

Hai Dang Ben its always good to learn from each other, thank you 🙏

[@VennGamesMoreDoBeWeirdThoLol]

Thank you very much for this video. I am so scared to handle anything with wires. And to see that I could bypass so much work with just the cable adapter, thank you 🙏. I placed the order for my new stick and buttons right after 😅

[@JoystickNY]

Enjoy my friend, its a good learning experience 👍😊❤️

[@BDOGreatSaiyanMan]

LOVE THIS VIDEO. Are you using an 8 gate or 4 gate on the joystick? Im certain its an 8, but just wanna make sure.

[@JoystickNY]

I use square gate, i find the octa gate abit too wide for me

[@viditrock]

Thank you. You have made my buying decision pretty easy

[@JoystickNY]

Glad to help 😊

[@aldinenriquez5160]

JoyStickNY has the most efficient/concise Arcade Stick modding tutorials on YT.

[@JoystickNY]

Thank you for the kind words, happy to help the community ❤️🙏

[@BowmansWorld]

Recently got a hori rap 4 kai and the drone. After a days use on the drone some of my buttons alrdy started to stick lol, im definitely going to follow this mod! Do you have a link to the sanwa buttons as well?

[@JoystickNY]

BowmansWorld thank you for the reminder, i will add a link to amazon in a about an hour. Amazon has some, but they dont have much colors to choose from. You can use focus attack, or arcade shock website for parts. They have more selections 🙏❤️ thank you for the love and support

[@GamingNightsNeoMasaki]

For some reason, the BBtag lmt. Quanba drone was cheaper than a standard one. Got that and mod them into sanwa parts.

[@JoystickNY]

Gaming Nights - NeoMasaki thats even better, the bbtag artwork is cooler. 🙏❤️

[@KCesar89]

Great, thanks for the video!

[@JoystickNY]

Appreciate you

[@josepholvina2740]

How timely this video is... i just bought a Qanba drone after being convinced by your other video 😉. So far Im ok with the stock lever, would Sanwa be any good?

[@JoystickNY]

Joseph Olvina the stock lever is actually not bad, it is better than a lot of entry level sticks, i would get comfortable with it and master it first, learn everything about it, once you think you are ready for the next step, then make the move 🙏😊 thank you for watching

[@4420Johnny]

honestly you should mod the buttons to sanwa, noticeably difference in quality. Drone buttons feel cheap and hollow. Have same opinion on the drone joystick, joystick lever is little more difficult to mod, need special 5pin harness or cut the wire on drone and place sanwa color cable together certain pattern.

[@JoystickNY]

John N thank you for dropping by 🙏❤️

[@rxzero00]

Well it depends on how sensitive do you like when it comes to button presses. Sanwa buttons are really sensitive as just a tiny touch can trigger the buttons. Sanwa levers are also really lose out of the box to me. You can fix that with a heavier spring or a tighter stick like those from Seimitsu. I like Seimitsu buttons because you need a little more force. If you like mechanical keyboards, then maybe Gamefinger buttons or Crown buttons as they use mechanical switches. I think the modern Hayabusa buttons from Hori are close to Sanwa but with a matte finish instead of the typical glossy finish. Also to consider is your budget really. Qanba buttons are close to Sanwa. For my Qanba Q1W I just use Seimitsu buttons and a Seimitsu LS-32 stick but I just use it for 3D fighters like Tekken and Virtua Fighter, other arcade games, shoot em ups, and Touhou Project games. My other Qanba Q4 RAF, I have it already stocked with Sanwa parts so I just use it for other fighters when I don't feel like using a game pad controller.

[@JoystickNY]

rxzero00 thank you for sharing ❤️👍🕹

[@TheRealDustinNunn]

For a lever, I recommend a sanwa JLF. For the buttons, I recommend hayabusa buttons. For the top, I recommend a bat-top. For Pac-Man and shoot'em ups, I recommend a four-way restrictor plate. And for fighting games and beat'em ups, I recommend an eight-way restrictor plate, so you can perform quarter-circle movements a lot more easier.

[@JoystickNY]

Dustin Nunn thank you for sharing 🙏

[@mamunhossain]

how can i make qanba drone a eight way restrictor plate ???

[@JoystickNY]

Mamun Hossain you can buy a sanwa octagon gate off amazon, ebay, focus attack website or arcade shock website

[@shahryarrizvi1]

@@JoystickNY what's the level of effort to also do the 8 way restricter & bat-top on Qanba drone as well - on top of the buttons and joystick? And I know it's off topic, what about those two mods on the Hori rap 4 Kai? (That's the one I went with, but I still have a return window on it) Update: I watched your video here and know how to do the bat top swap now: kzbin.info/www/bejne/joTGl2qeg5V7jaM Still interested in octagon restricter

[@JoystickNY]

Changing the octagon gate and bat top takes 5-10 mins, should be fairly easy; basically it clicks off and clicks on and screw the bat top on and off, definitely try it and see how you like it 👍🕹

[@theunkemptvaper6866]

Great video bro!

[@JoystickNY]

The Unkempt Vaper thank you so much 🙏 welcome to the channel

[@theunkemptvaper6866]

@@JoystickNY I love your channel bro I especially like the reviews of the sfv panthera and the madcatz sticks which I'm getting soon before they sell out at the few online shops that they are still available at because I know they stopped production on them a long time ago. Sorry for the long reply.

[@JoystickNY]

The Unkempt Vaper always love and appreciate long comments, if you like fighting games, those sticks will be nice to have, i am keeping mine in the box and see if i can make use of it someday in the future. 🙏

[@theunkemptvaper6866]

@@JoystickNY you should buy another one to use and keep one for collecting. They have a few on a amazon of both panthera and madcatz. It just takes me so long to buy stuff cuz I'm broke lol.

[@JoystickNY]

The Unkempt Vaper i m mostly using my RAP4 daily, i will try to leave those 2 in the box lol

[@milksteak4009]

Very helpful thanks a bunch 😀

[@JoystickNY]

Thank you for watching

[@ryanimperial651]

Awesome content as always!! Can you also make a moding video for the hayabusa rap n? 😅😅

[@JoystickNY]

Ryan Imperial thank you, yes, let me add that to my list 🙏❤️🕹

[@MuTheGuardian]

Wow bro thank you so much! You're fantastic!

[@JoystickNY]

thank you for the support 🙏❤️

[@thissmithymanga7119]

My only advice to someone wanting an arcade stick is to save a bit and get a good one, or buy an enclosure and put it together yourself, its pretty simple with very little knowledge required and will be future proof and easy to work on, if you buy something good quality once you don't have to keep buying slightly better sticks.

[@JoystickNY]

Very true 👍🕹 thank you for sharing 🙏❤️

[@David-ws6do]

If one were to replace the USB cable for the drone. What is the name of the USB cable?

[@JoystickNY]

David arcade shocks sells a cable here is the link arcadeshock.com/products/qanba-usb-cable-for-dragon-arcade-stick

[@rtgcoins1164]

I'm asking sir, that joystick is it compatible for android phone.

[@JoystickNY]

No, only ps4, ps3 and pc 🕹❤️🙏

[@rtgcoins1164]

@@JoystickNY thank you

[@gerardoruiz2334]

gracias amigo, saludes desde honduras

[@JoystickNY]

Gracias my friend ❤️🙏

[@yocyber5711]

Kinda bummed I can’t put a hayabusa lever on this thing, but other than that I gotta say that this fight stick looks super modder friendly and modular. Especially the power cable, which is something the tes+ madcatz is a pain in the ass to replace since you have to solder it yourself. And that cable housing is super great since most cable housings on other budget sticks with the doors, are prone to breaking. This thing looks pretty well made, I’ll definitely pick one up.

[@JoystickNY]

I agree, thank you for watching, i love this stick 🕹👍

[@edisonbaylon8258]

bro keep it up!

[@JoystickNY]

edison baylon thank you brother 🙏❤️

[@mamunhossain]

Hi JoyStickNY, i just bought my qanba drone, button is ok, dont mind that much but dont like the accuracy of the joystick at all. im kinda sad now. Im an old school arcade gamer, i want the joystick to be as close as old arcade machine joystick possible, any advice?? i think seimtsu joystick will be the closest to old arcade machine joystick. if it is, then which model seimtsu joystick should i buy for my qanba drone? link would be fantastic. thanks

[@JoystickNY]

Mamun Hossain i been playing in the arcade since 2000, the parts that was in the usa arcades were happ part. They were circular gate and they feel tighter. The qanba drone lever and button is actually better than what was it the arcades, i think maybe you have to give it some time, Japanese parts are more loose, but loose doesnt make it less accurate, if you prefer a tigher feel, you can change the spring on the lever to a heavier spring or change to happ. But i dont recommend happ. Qanba is very close to sanwa, try to give it more time. Let me know in the future, if you really dont like it, i ll give you some links to seitmitsus

[@mamunhossain]

@@JoystickNY thanks for your quick reply. Sorry for the confusion, Im from sydney and here we use Japanese arcade machine with japanese ball lever, not happ part, at least in my time (around 20 years ago), so i think im used to with loose lever i guess. i also watched your video "Sanwa vs Hayabusa Vs Seimitsu Review Detail Comparison 2019 HD". and i think i will like the seimitsu lever than sanwa and my current one comes with qanba drone. will buy both sanwa and seimitsu lever and decide myself what i like as you advised on the video. all i need is the right seimitsu lever link to buy for my qanba drone. thanks for your time

[@JoystickNY]

Mamun Hossain the seimitsu lever i have doesnt fit the qanba drone, there is not enough room

[@josemelchor1792]

The way you modded this drone would it be the same for an obsidian? Or it a different way to mod the obsidian?

[@JoystickNY]

jose melchor yes, its the same, but is easier, you dont need the 5 pin cable, the obsidian has a cable inside, you can just plug straight into the sanwa JLF joystick lever ❤️🙏

[@josemelchor1792]

JoyStickNY thanks for the help! 👍

[@kingmula2]

Looks easy

[@JoystickNY]

Thank you for watching 🙏❤️

[@ktx7355]

The Sanwa lever that you have in the description is the real deal? Some review doesn't seem to agree.

[@JoystickNY]

Get it from focus attack, paradise arcade shop, and arcade shock, just incase

[@braveheart0317]

Hi Which do you prefer with or without shaft cover?

[@fragonarag]

I was able to fit a seimitsu ls-40 for shmups

[@JoystickNY]

Did you have to cut anything?

[@theelusivememe1772]

do you have to have the metal part of the wire connected all the way down on the metal part of the button? On my hori rap n, the metal part that you pull up is really stuck on there so when i reconnected it, I connected it back just a little past halfway so next time it isn't so hard to take out. Will this cause any issues if, as of right now, the buttons seems to work perfectly?

[@JoystickNY]

the elusive meme you can actually adjust that metal part with a plier, you can loosen it up and then plug it in and clamp it tight, its soft metal meant to be bent.

[@theelusivememe1772]

@@JoystickNY i dont have a problem putting the metal part on, its more the taking it off the button part that is hard. I use pliers to lift it up a little than I just pull it out. But i was wondering if its okay to not have that metal part all the way down so i wouldn't have to use pliers next time.

[@JoystickNY]

the elusive meme if it works, then you dont have to worry, i think some of mines are sometimes half way too, as long as its tight enough so it doesn’t come loose.

[@theelusivememe1772]

@@JoystickNY okay thanks for the input

[@patofoxgames8240]

Tô comprando um agora. Mais pra frente talvez eu faça esse upgrade. Muito bom mesmo. vlws

[@JoystickNY]

Aproveite, obrigado por assostir ❤️

[@KaiserMitchel]

Thank you

[@JoystickNY]

Happy to help

[@davefitzpatrick83]

Awesome video, and keep up the great work! I'm looking to buy my first stick, and this looks like a nice option. There are a few used Madcatz TE2 sticks for sale in my area (SF4 "rivals" and a SF5 Chun-Li). Both are in "like new" condition, and are about the same price (maybe even cheaper) as a Quanba Drone + upgraded parts. Would you recommend the TE2s over the modded Drone? Thanks for your help!

[@JoystickNY]

Yup, if you can get a te stick cheaper than the qanba drone, it would be a more comfortable stick long term. ❤️🙏 thank you

[@davefitzpatrick83]

@@JoystickNY awesome! Thanks very much for your help! 😊

[@wildwest1832]

What does upgrading the buttons to sanwa change from the normal buttons?

[@markg6852]

Good video but question upgrading to a sanwa joystick and buttons will it make a difference and if so how ok thank you for your time.

[@steffen7472]

Now that the Qanba Drone is going for the same price as the F500, what would you recommend? I don't like that you need a ps4 controller to connect to a ps4, but you can get a usb dongle that makes it standalone.

[@JoystickNY]

S Rhom i think the f500 would be a better deal in terms of value, because u get a bigger and heavier body and its multi console, but i think i would personally go for the qanba drone becuz i dont like to connect controller part too. Both of them are similar in terms of function and parts, go with which ever design you like better . Or wait for a sale

[@da_masterdudelol666]

I also have another question is the seimitsu stick the most precise stick because in your comparison video you said that it was best at diagonals and im still a bit confused which category the stick would fall in

[@JoystickNY]

Da_Masterdude Lol technically it is the most precise in terms of how hard you press, becuz of the metal, every little pressure you push will show, where as other switches are simple just press or not pressed, thats why seitmitsu is more accurate in that catergory. But in fighting game, that pressure doesnt really matter becuz there is no input that has partial press or half press, if you know what i mean, generally speaking, they all work great, if you arw unsure, go with sanwa . You cant go wrong with it 🕹😊

[@TaigaGalette]

sadly those 5 pin adapters sold out on amazon i hope focus attack doesnt take long to ship

[@JoystickNY]

They usually restock pretty quick, use the stock buttons for now, they should get the job for now 🙏❤️

[@aftab-4408]

Bro Thanks a lot !!

[@JoystickNY]

Thank you

[@Kuya.AriesTV]

Are there fight sticks that use the Seimitsu lever? Just curious?

[@JoystickNY]

Aries Austria great question, from what i seen, No, majority of sticks uses sanwa, hori uses their own hayabusa, and other cheaper sticks uses unbranded parts.

[@soupwithpotatos1542]

thanks for this, it worked. however i stupidly broke the final screw and it broke inside of the thing. so ill have to figure out how to remove it when i decide to go full sanwa parts.

[@JoystickNY]

Use a small drill, mostly u have to lightly drill out the stuck piece. Be very careful not to damage the surrounding.

[@djMaki]

great video , but you should really turn off auto focus , it was super distracting

[@JoystickNY]

Thank you for the feedback, still learning how to use it properly 🙏❤️

[@Inphinity2]

Thanks for continuing to run this channel! Been curious for awhile and finally picked up a drone this week. First ever stick, but the lever itself feels a little loose. Is the Sanwa tighter or similar?

[@JoystickNY]

Sanwa its abit more steady, but also similar, it feels just right for me, give it a try after u have more practice 😊

[@EloyAguilar95]

What Octagonal restrictor can I use for my default qanba drone?

[@yumyumrazon]

how can you speedup the turbo mode of the QANBA DRONE 1 ?

[@louiesupan7790]

Please review the Hori 129a :) I haven't found any decent reviews of that one

[@JoystickNY]

Louie Supan i believe that is a Japanese region only stick, it is not sold in the usa, i would love to pick 1 up if i see one on sale ❤️🙏

[@louiesupan7790]

JoyStickNY oh, I didn’t know that.. I live in the philippines which is quite close to japan and they sell it here.. I just can’t find a decent review for it. Thanks for replyin tho :) Keep safe!!

[@JoystickNY]

Louie Supan how much is it in your country?

[@louiesupan7790]

@@JoystickNY it's $90 USD

[@JoystickNY]

Louie Supan ok, that a reasonable thank you 👍

[@Abizai17-MX]

Do you agree that we can move the pcb and all cables to other case? How you know is imposible get some arts on this one But i was thought that opción

[@JoystickNY]

The art looks spray painted or hard glue on to the plastic, its possible to add your art, but you will have to print your own vinyl ❤️🙏

[@kajakun]

I'm looking for my first arcade stick. Is this a good choice for casual gaming?

[@JoystickNY]

Yes, its one of the best and popular entry level arcade sticks right now, cant go wrong with it, and u can upgrade it in the future if you want to

[@hanslambda9653]

Great video ! Thanks! Do you know if seimitsu Buttons works? And what dimensions ? Sorry i’m a beginner 😅

[@JoystickNY]

Seimtsu buttons should work, the lever will not fit

[@philipma7185]

does the qanba drone have a square/Dimond gate or an octagonal gate?

[@JoystickNY]

Square gate 😊

[@philipma7185]

@@JoystickNY what octagonal gate works with it?

[@Alejandroid1979]

Loved the video Do you or anyone knows if the shaft cover and dustwasher that comes with the drone stick can be use with the sanwa JLF? So I don't need to order those plastics? Thanks in advance

[@JoystickNY]

Yes it does come with a dust washer

[@shinythings7]

Really love the channel. Resources are super helpful. Any chance you know if the Sanwa Screw Buttons work with the Drone? And do you have a preference on screw-in or click-in buttons?

[@JoystickNY]

I havent tried screw in buttons yet, if u want, msg me on instagram; that way i can remember to check for you. I always prefer snap in, i find it easier❤️🙏

[@cookiewon2699]

will Korean lever 309MJ fits?

[@owaowa2549]

moded qanba drone or hori rap 4 ? which is more worth ?

[@JoystickNY]

Owa Chan hori rap 4 would be better worth, but it would he 2 diff things tho. Cuz ur qanba will be all sanwa parts, and hori would be all hayabusa parts

[@owaowa2549]

@@JoystickNY ohh I see thanks as always

[@owaowa2549]

last question can I change the artwork of qanba?

[@JoystickNY]

Owa Chan nope, cant change the artwork on the qanba or hori rap4, becuz the design is print directly on the plastic, the only way u can add a artwork is buying like a sticker to cover it, but its not worth it, over time it will peel and come off

[@owaowa2549]

@@JoystickNY Oof thanks for the reply

[@liltakifuego3993]

awesome video, any chances to do a mod on this stick with the brook universal fighting board? I can't seem to find a good place to put the board in it, at least not without modding the entire box, love your videos :)

[@JoystickNY]

I do have a similar video down the road; still quite some video on the list. Thank you for the suggestion