TouchMix Aux Mixing - Part 3: How to Route the Main Mix to an Aux/Monitor

[@napynap]

Finally need to have another set of mains out in the crowd. I'm using option 3 on a TouchMix 30 Pro. Will set the delay when I get there and I'm done. Thanks for this!

[@CSLEASTHAWAII]

Thanks. You told me what I needed to know, quickly and clearly.

[@Bigbrossi]

When using option 2, are the fx settings from vocals Aldo being send to that aux output???? Regards Brian

[@luciferleyva]

Hey QSC I'm trying to connect my phone to my touchmix 8 to play music on my speakers. Is there a video for that ? I'm having trouble trying to figure it out

[@yamansitar6153]

hi , could you use the aux mix to send to a hardware compressor then back into my audio interface for mastering back into my daw , ?? if so should I use opt main mix or track main mix ,, as my audio interface only has 2in -2 out ,thanks for the video

[@rushdrift]

I need help is there a way for me to take the output from the mixer and connect it to a laptop 3.5mm mic jack? because I connect multiple mic into the mixer but I have no idea how to connect the output from the mixer into a 3.5mm mic jack

[@rke6ho]

Is there any possibility to get the mix inkl. Effects on the phones and monitor cue? I want to use both outputs as inear Monitor Mix for a shared mix for bass and e-drums for a silent rehearsal… so I currently cue the main mix but unfortunately the mix is without any of the effects… how can I get the full mix including effects on phones and monitor cue? Thanks and regards Kay

[@andrewkoval6399]

Ive got a qsc 16 I'm a drummer and we use another qsc touch 16 for the rest of band. I'm using presets for now till i learn the board. So i just take an aux channel and send that to other board. I think its should be post fader. Any info would help

[@andrewkoval6399]

two months and no response.... thats great !

[@njdenney69]

This isn't working for me unfortunately. When I am using the Aux 1 output and have the fader on my Mic turned completely down, I can still hear the effects. How can I rectify this?

[@AnishRaja-wr4vg]

In the third option. In the setup it should be pre fader or post fader. I have set post fader but the fader are not changing according to main mix

[@napynap]

I'm answering this two years later, so I'm sure you figured it out, but for the newbies here... the fader is not going to change. Pre and Post fader refer to the signal level that you want. Pre is after the gain, and Post is after the gain and after the fader. You may also see Pre and Post dynamics. That would be before and after compression.

[@atmiyamakadiya2940]

Aux Send is not Post Fade, So if we want change FX master we also have to change Aux send level of FX

[@stevenwilson691]

Thank you!!