Quadratec LED Stealth Interior Mount Light Bar Install & Review for 2007-2018 Jeep Wrangler JK

[@macman1138]

I'd pay $400 or so for it, but $699 is too much for this. Does look great, wonderful idea, too expensive.

[@zachconroy1443]

Good news it's on sale this labor day

[@cruzzindodge]

Try $749.99 🤯 puts this light upgrade in the ridged and KC price range but I don't think it's as bright 🤔

[@josephrestuccia229]

Kc light bar is 2k this is worth every penny for 7 imo its sleek and plug and play install is easy

[@deabruzo]

nice idea! But someone needs to post a video of how much light bleeds into the cabin when used at night, and discuss if it's distracting.

[@cerwin21]

Theres one video of a guy who mounted one. Its very little at all, I was impressed. Search for it

[@zachconroy1443]

Yeah, you need a friend to hold the bar up tight to the window when you tighten the bolts, but if you do that it seals up nice.

[@HurricaneGabby]

Not for me. It's completely flush to the trim, but have a gap across the entire windshield. Trying to figure out how to fill it, I don't want to use sealant, and having trouble finding edging that will fit over the existing edging.

[@timsouza7592]

Just wait until you click on the product link and the 700$ price tag slaps your teeth out

[@uselesslysexy]

Haha I thought it was just me. $700 just seems like way too much. I'm thinking other brands will come out with competitive prices.

[@aaronho4242]

Honestly not that much

[@ToddKirst]

👀👍🚥 I installed mine today and it was a breeze. I was also able to retain my Rugged Ridge Grab Bars as well. 10,200 lumens is no joke! This is one bright Light Bar and I highly recommend it to anyone that wants a Stealth LED Light Bar!

[@natashasebastian937]

How did you wire it even with grab bars? I have the grab bars as well

[@ToddKirst]

@@natashasebastian937 - There is enough Gap to get the wire through the Anchor Mount. Trust me, you can get it to work with Grab Bars installed with no Issues.

[@chrissmith7364]

Pretty sweet design, especially because you leave the center footmans loop out of use which is nice for everyone that has the rocker switches/air/c.b mounted there. I'd be willing to bet that a lot of stock Jeepers would have this if the cost was down to $500. I would consider one in the back hard top window as well if they were only 5 notes.

[@macman1138]

True, not worth what they are asking for it currently. I'd pay $499 at the most.

[@beakman71]

@@macman1138 $500 is still too high. Plenty of great light bars out there for $200 or less. Another $300 for a simple housing and a plug-n-play is nuts. The concept of interior lights sealed off to prevent glare isn't new. Cops and firefighters have had that for strobes for eons. I was already planning on making my own even before this came out, because I can't stand the noise of those bars above the windshield. Plus they catch every bug and limb in sight.

[@vitale6633]

Creative and Clever design.

[@00corin00]

I would consider but wont work with grab bars installed. I use my grab bars far more than I would use this.

[@jesusruiz3723]

You short ? Lmao fuck them grab bars lol I got a 6 inch lift no steps and hop in no problem

[@00corin00]

@@jesusruiz3723I use them for a lot of different reasons. No I'm not short.

[@jimcarlson6157]

@@jesusruiz3723 you sound rude for a girl

[@jacob_d_f]

I love this, esp since im building out my jeep to be more slick and modest looking. Hope these come back into stock for a 17 Jeep JK.

[@Quadratec]

They will soon!

[@mikeguitarification]

Like it, but $700 is steep

[@macman1138]

Too much for what is. $400 is much more reasonable.

[@kourgath007]

@@macman1138 I agree. I feel they are capitalizing on the "novel" design. Maximize profit early to recoup manufacturing costs. Give it a year or ten and the price will likely come down. Till then I will spend my next $700 on my lift.

[@BRAVOACTUAL]

Im sure some volunteer FD's would love a strobe version for POV response cars... Just sayin.

[@AlejandroSanchez-qo8qy]

That's awesome!!! I need this wiring harness for when I install led light bar on my Gladiator makes it so much easier

[@cerwin21]

This would be suppurb to put in my Toyotas and Honda Talon. We already scrapped a light bar right off the talon.

[@Retro_Cosmos]

Finally yes!!!! I’m in tears

[@DarthJeep]

I like this idea and if I didn't already have a light bar hiding a dent from a rock, I'd probably go for it. Only issues is having to lean two more inches than I already am to see traffic lights. I have 35's on a 4" lift and I'm 6" so I have to pretty much do it at almost every signal light as it is, This would have me with my head over the steering wheel I'm guessing, but it seems pretty thin so maybe not? ANYONE have this that can say for certain? ...WOW! $699.00 , seems a bit much for what it is, but it is't like they have a lot of competition in this category for "interior mounted light bars", but when a cheap exterior one can be had (and I do mean cheap in every sense) with the mounty for $75-$150...kinda hard to compete especially as the reliability and quality on this one is a bit of a mystery.

[@CPTVanderklok]

The only problem I have with the install watching this is at 5:38 he says "go ahead and repeat the process on the drivers side. He only means the pitman loop

[@odys3803]

I'd appreciate to see how is it outside during the night, it looks like quite a lot of light leaked into cabin.

[@Quadratec]

We've made some improvements to this light with our NEW Gen 2 version of the Interior Stealth Light Bar - kzbin.info/www/bejne/eH3JZmebjsmhb5I

[@odys3803]

@@Quadratec nice, you also improved the video. Good job.

[@sm00vee42o]

2 questions: is there any shine leak in the interior glass when on? will the light work with grab bars mounted to the A pillar?

[@devonjennings7584]

Their website says it is NOT compatible with a pillar grab handles.

[@sm00vee42o]

@@devonjennings7584 thanks.....

[@cesargallegos7545]

I installed mine on a JK. I do have grab handles on the A pillars and also an spod switch bank on the top. It cleared everything without any problems. I did have to replace the gasket on the bottom edge of the light bar because initially I had a lot of shine leak. The seal I got is a little deeper so this allows me to push it better against the windshield and actually create a good seal. This is the same gasket you can get for door trims and such on amazon.. I’ve seen some people use silicone which I was not willing to do plus it could be messy. With the gasket I used it made it clean, adjustable and effective. The website says you can’t fit those pieces but mine worked fine. Hope this helps.

[@MrSyduk]

@@cesargallegos7545 thnx! which company grab handles and spod switch bank you have? and which gasket did you get from amazon? awesome if you can post the link.

[@HurricaneGabby]

@@cesargallegos7545 I'd also like to know which door gasket you bought. My SmittyBilt grab handles fit fine with this. Tight, but fits.

[@epicsineverydaylife]

Option for the TJ models please

[@alexmacksey9257]

I want this for my LJ so badly

[@JJ-ld3pe]

This is such a cool design and very clean install!! Can’t wait to get mine for my JL

[@anthonyanderson1420]

Awesome...I have a 6 inch windshield visor tint. Will that effect the the visibility or burn the tent?

[@richardmorris8764]

Make that for my 2018 RAM

[@NickRBrown]

Why no Bronco?

[@Quadratec]

We specialize in Jeep parts here at Quadratec

[@haroldjaochico7580]

Will this fit a have a switch pod? Which I have.

[@johnnysalazar8262]

How much is it? About $600 or $1,200 🤔

[@manfree6543]

Why don’t they make these for TJs too?

[@jairosalamanca3360]

Hey guys I have a 2000 tj need the catalogo for this type of Jeep thanks

[@richardcarrier367]

Will this work if you have a switch pod installed aleady?

[@9929kingfish]

it will interfere. will not work.

[@9929kingfish]

it will interfere. will not work.

[@cxpcman]

Aerodynamics of the wrangler. What aerodynamics?

[@georgerabel3760]

Would this work with grab handles and a 6 switch S Pod that mounts next to the rear view mirror.

[@philliprollman7421]

When will this be back in stock?

[@colindoughty4866]

I've heard conflicting information regarding if this will fit with an S-Pod installed? I have a six switch bank mounted above the rear view mirror. Does anyone know for sure if this will fit with the S-Pod installed? Thanks in advance.

[@haroldjaochico7580]

Will this work if I have a switch pod already?

[@DRONESVU]

i realy like mine for JL JEEP

[@jinoh7418]

How much glare is bounced back into the jeep?

[@Niketheknife]

EXACTLY.......unless it is sealed to the window..there will be glare for sure....but how much? Someone do a video please.....

[@jinoh7418]

@@Niketheknife im not sure many of these will be sold. It is expensive!

[@ToddKirst]

Light Leak is minimal. It doesn’t bother me at all.

[@rotaryrotary4227]

I like it but it looks like it won’t work with my aftermarket handles. I’d have to see some up close pics of the installed product

[@9929kingfish]

nope. will not work apilar grab bars

[@ToddKirst]

I got it to work with my Rugged Ridge Grab Handles.

[@anthonymontalvo1091]

Does it come for a 2019 Dodge Durango?

[@Tony85ish]

Do you guys have one for a 2019 jeep renegade ?

[@SmokeytheJeep]

Is this light bar compatible with the Tuffy Overhead CB console, which also uses those two footman loops?

[@Quadratec]

This light bar would block the mounting area for the CB console.

[@SmokeytheJeep]

@@Quadratec That’s what I was afraid of. Thanks for responding!

[@Galakto_Playz]

400 reasonable but 700$$$$ too got damm high lol

[@Chuckq1]

No more a pillar grab bar.

[@vincemargiotta3014]

will this be installable with an Spod switch system by the rear view mirror?

[@haleymartin5217]

I wanna know that to but no one has told me I have asked almost every video for a couple months

[@avidanojeda]

Yes you will be able to install if you have spod mounted by rear view mirror

[@manny9561]

$700 for that !!?

[@teamrecklez7719]

To expensive

[@javi8452]

Plug-and-play 😂

[@macman1138]

It’s still priced too high.

[@zxtuner4lyfe]

Too expensive

[@retiredman]

$700 bucks OMG lol you got to be kidding lol Noway I would pay that. Way over priced!!

[@tyrannystopper4972]

Seems we got a lot of broke folks in the comments. This unique design is certainly worth the $700. TRUMP 2020

[@uselesslysexy]

Being a conscious consumer doesn't mean one is "broke." And sorry for your loss.

[@tyrannystopper4972]

@@uselesslysexy You seem special...Haven't lost anything. Hang on to your MAGA Hat..

[@9929kingfish]

It is a unique design, but certainly not worth the coin they are asking in my opinion. I'd rather spend that towards my steering up grade any day.

[@uselesslysexy]

@@tyrannystopper4972 Haha I seem special? On earth, Trump lost. Not sure what reality you live in. Again, condolences.

[@original_silverdee]

I have my cb radio mounted above the rearview mirror, would it interfere with the lightbar?