No video

5 Tips EVERY Apprentice Should Know!! HVAC Lessons

  Рет қаралды 131,809

Quality HVACR

Quality HVACR

Күн бұрын

- SUPPORT THE CHANNEL -
www.patreon.com/qualityhvacr?...
- Check out @TruTech Tools, LTD -
www.trutechtools.com (Use promo code “QUALITYHVAC” to save 8%)
- HVAC TACTICAL -
hvactactical.com/ (Use Promo Code "QUALITYHVAC" to save 10%)
- FOLLOW ME -
Instagram: @qualityhvacr
- BUSINESS INQUIRES -
qualityhvacrtn@gmail.com
- TOOLS I USE -
Fieldpiece SC480 Meter: www.trutechtools.com/Fieldpie...
Fieldpiece SC680 Meter: www.trutechtools.com/Fieldpie...
Fieldpiece Job Link HVACR Charge & Air Kit: www.trutechtools.com/JL3KH6?a...
Fieldpiece SM380V Digital Manifold: www.trutechtools.com/Fieldpie...
Veto ProPac Tech MCT Tool Bag: www.trutechtools.com/TECHMCT?...
Supco Magnetic Umbrella: www.trutechtools.com/Supco-Ma...
Solderweld HVAC Brazing Pack: www.trutechtools.com/HVAC-15-...
Solderweld Hot Block Putty: www.trutechtools.com/SolderWe...
Navac 2cfm Battery Operated Vacuum Pump: www.trutechtools.com/NAVAC-NP...
Cordless-Vacuum-Pump-2CFM?affid=38
Accutools BluVac Micron Gauge: www.trutechtools.com/Accutool...
Accutools TruBlu Evacuation Kit: www.trutechtools.com/Accutool...
Veto ProPac LC Tool Bag: www.trutechtools.com/Veto-Tec...
Veto ProPac MC Tool Bag: www.trutechtools.com/Veto-Pro...
Fieldpiece Job Link Pressure Probe: www.trutechtools.com/Fieldpie...
Appion 1/2" Hose: www.trutechtools.com/MH120006...
Appion 3/8" Hose: www.trutechtools.com/Appion-M...
AccuTools Core Removal Tool: www.trutechtools.com/Accutool...
Malco Sheet Metal Snips (Left Cut): www.trutechtools.com/Malco-M2...
Malco Sheet Metal Snips (Right Cut): www.trutechtools.com/Malco-M2...
Malco Sheet Metal Snips (Bulldogs): www.trutechtools.com/Malco-M2...
Malco Sheet Metal Snips: www.trutechtools.com/Malco-MC...
Malco Turbo Shear Cutter: www.trutechtools.com/Malco-TS...
Malco Sheet Metal Hole Cutter: www.trutechtools.com/Malco-HC...
Malco Flex Duct Cutter: www.trutechtools.com/Malco-FD...
Malco Panduit Gun: www.trutechtools.com/Malco-TY...
Malco Sheet Metal Hammer: www.trutechtools.com/Malco-RH...
Malco Turbo Crimper: www.trutechtools.com/Malco-C5...
Malco Sheet Metal Pipe Crimper: www.trutechtools.com/Malco-C5...
Malco Reversible Hex Driver: www.trutechtools.com/Malco-MS...
Malco 24" hand bender: www.trutechtools.com/Malco-24...
I think its important to always level up your skill set. Whether you're an apprentice or a journeyman. In this video I cover 5 tips that I think will make you a better installer, technician, troubleshooter, or whatever position you're currently in. Remember, to be the best version of yourself, you have to put in the work. Hope you enjoy the video!!
#apprentice #hvac #skilledtrades

Пікірлер: 312
@madmat276
@madmat276 2 жыл бұрын
As an Owner/operator the one thing I'll disagree with you on is the being early part.. I just need you to show up on time. No point in coming in early. I've made time for you to come in stock the truck use the bathroom gossip figure out your work orders and head out.. We all have life's spend that extra 15 minutes with your kids and family.
@tinicoleofficial
@tinicoleofficial Жыл бұрын
I love your perspective
@mrrr407
@mrrr407 Жыл бұрын
This the kind of people I can work for
@montanamike7948
@montanamike7948 Жыл бұрын
you're missing the point.... glad you're not my boss I guess. maybe I am lol
@madmat276
@madmat276 Жыл бұрын
@@montanamike7948 No I understand the point but why do you, or anyone else need to show up early. Unless it's something special. Put in the effort and do a good job, during the hours I scheduled you. Not during your time, your entitled a life too...
@joeyanthony7831
@joeyanthony7831 Жыл бұрын
I literally show up early on the basis that traffic is weird where I live. If I show up 10-15 mins early, I can sit in my car for a minute and scroll insta before work 🤣
@TommyLor
@TommyLor 6 ай бұрын
Im 28 years old and a father of four. I was working at a dead end manufacturing job for 10 years and knew it wasn't it for me. This past fall I saw a scholarship that was hard to get but I worked my butt off for it and it paid off!! I just got accepted this spring for a full ride for my HVAC associates degree! TIME TO MAKE A CHANGE! GOD IS GOOD! 🙏
@schwarg1337
@schwarg1337 3 ай бұрын
Great story, God Bless.
@BUSSINHC
@BUSSINHC 3 ай бұрын
Awesome! I’m also 28 and have been in the hvac field since I was 18, you will love it if you like working with your hands! Much love and hope the best for you and your family🤘
@FinsUp365
@FinsUp365 3 ай бұрын
@@BUSSINHCI’m currently in the Army deployed and get out soon. I have a little one I need to provide for and was wondering how did you get into the HVAC field? Don’t really know what to do. I keep hearing union, college, and/or trade school.
@Cheesus68
@Cheesus68 3 ай бұрын
@@FinsUp365 become a technician, every call is different so you’re always challenging yourself to problem solve while helping someone and making good money.
@unabridgeddick6645
@unabridgeddick6645 2 ай бұрын
I've been in printing for 27 years operating production lines and gotta get out. A friend offered me a HVAC job starting at $23/hr. Says I'll go out and prep for the technician to work and give all the training and a work vehicle. It's a lot less money but I feel like I'm in the same boat as you. These factory jobs are horse shit.
@ALLrobotsAreSad
@ALLrobotsAreSad 3 ай бұрын
Just want to point out, for someone as yourself that is a hvac tradesman, you have a good eye for shot composition, good quality video, and editing skills. Hope you have a good day!
@Guznx
@Guznx Жыл бұрын
Landed an apprenticeship with a local company, no prior experience or knowledge, I was still given the opportunity which I think is a big plus in my book. Now it’s up to me to put in the work and time to educate myself within this ever expanding industry. Super excited.
@dporrasxtremeLS3
@dporrasxtremeLS3 Жыл бұрын
Wow, Go for it! Study, give of your efforts! You will be rewarded in many ways along with big paychecks!
@northstar9903
@northstar9903 Жыл бұрын
Same here! Start as an installer on Monday. No prior experience or knowledge in hvac. These videos have been entertaining to watch and insightful. Best of luck to you!
@wcmys8408
@wcmys8408 Жыл бұрын
local company gave me their card while i was serving them at my current job. took about 5 months but i’m finally in contact with the job and might be able to land the gig. no prior experience either but they thought i might’ve been a good fit. hoping for the best
@antonio-zf5ql
@antonio-zf5ql Жыл бұрын
hows it going for you rn? Im about to start my apprenticeship with this one local company as well, had my phone and I am about to have my in person interview as well, super nervous
@CamTooFresh
@CamTooFresh 9 ай бұрын
@Guznx How is it going so far?
@courtney2878
@courtney2878 11 ай бұрын
I’m an almost-30 y/o woman and I’m starting hvac school in a couple of months, your videos have been very educational and insightful as to what I can kind of expect from this industry. It’s making me so excited to start!!
@danthemann19
@danthemann19 5 ай бұрын
have you started?
@techbass9440
@techbass9440 2 жыл бұрын
The number 1 thing I tell my install helpers is to take pride in your work. I firmly believe looks, and functionality go hand in hand. Especially in install. Chances are if it looks good, it will function for years and years to come.
@kreyeptic4369
@kreyeptic4369 Жыл бұрын
Installs are art man, You want other people to be impressed when they see your installs(art work), That is how I look at installs when I do some.
@premiumrider13
@premiumrider13 8 ай бұрын
Nothing better than a nice sharp looking install makes you feel great and makes the home owner feel even better!
@nathandrabing5942
@nathandrabing5942 2 ай бұрын
This is what the main home owner notices. They don't know much about the unit other than it looks good. That is also what they will tell their neighbors.
@jhill.7216
@jhill.7216 2 жыл бұрын
I have one more year of hvac school!! I got my epa universal licenses before the semester ended. Thank you for all you do man
@RedemtionMusic
@RedemtionMusic 2 жыл бұрын
That license is gold brother!
@lukeroelofs2968
@lukeroelofs2968 Жыл бұрын
i’m about to go into community college for HVAC, how should i go about obtaining the EPA universal ?
@downhillminion6534
@downhillminion6534 2 жыл бұрын
These tips definitely help out. I started working for a local company and I knew the contractor way before I started working for him. He taught me everything he knew too. The reason why he had a hired me was because I showed up on time and not just some time but like you said 1015 minutes before she had told me the fact that I showed up before that said a lot about me. He is no longer with us but I will forever remember everything he taught me and I am very thankful that he took me in when I knew nothing about HVAC. Unfortunately he passed away April 2019 and since then I have started working for another company in my little town, but if it wasn’t for him I would’ve never be where I am at today! The best decision of my life that I’ve taken was to take the job offer he offered to me. I’ve been in this train for 4 to 5 years now and I would love to get up in the morning go to work and learn new things about the trade. Keep up the good videos I enjoy watching your content
@billyflanagan9657
@billyflanagan9657 10 ай бұрын
Sorry for your loss my best friend taught me and he also passed Away he was also my instructor in 1987. He always said a day you don't learn something is a day wasted. I got in pipe fitters local union in 1997 he would have been so proud I since have worked for trane and york
@truongdang8130
@truongdang8130 Жыл бұрын
A new apprentice here and about to start tomorrow after graduating aug 2022. A year of schooling was rough but i know i can do this and will stick with this career. Thank you for the tips and ill make sure i take my job more seriously because this stuff in HVAC is very interesting!
@ItzArsenal402
@ItzArsenal402 Жыл бұрын
Hey man im about to finish school in may, did you feel like you learned alot? I feel i learned almost nothing in those 2 years and now i feel really anxious because of that, and them thinking ill know stuff when i really dont
@jacobsimmons4335
@jacobsimmons4335 Жыл бұрын
@@ItzArsenal402 I feel your pain…i'm going to graduate May of 2024 and even though my classmates and I try our bests to learn the info, i feel I don't get the real world training I really need
@juiceboxjulian6990
@juiceboxjulian6990 Жыл бұрын
​@Jacob Simmons man same here. Honestly not sure if it's on the teachers or on us at this point.
@leeb.7188
@leeb.7188 Жыл бұрын
As a customer, I had a young guy show up in a joke t-shirt, saggy pants and long, ratty hair. He was constantly looking at his phone. He just didn’t seem professional at all, like he was still in teenager mindset, not adult tradesman. I didn’t trust his competence, so took the estimate but never called his company back. Point is, your appearance has to inspire confidence that you’re a professional. People aren’t going to be willing to write a fat check to someone who looks like a goofball.
@Betoven81
@Betoven81 Жыл бұрын
@@ItzArsenal402hey you sound a lot like me lol. Have you started hvac work yet? I got my license years ago but I felt like I didn’t learn anything in school. So I was hesitant to start. Now that I’m getting older, I need to be serious about it
@recommendedforyou_
@recommendedforyou_ Жыл бұрын
Absolutely loving your videos man I’m 3 months into working at an hvac company coming from no schooling whatsoever ever and I’ve been learning a lot insanely fast. Willingness to learn, common sense, and paying attention really goes a long way in this trade I’m excited to keep learning and keeping getting my hands on new things 🙏🤘
@someonehasmyname
@someonehasmyname Жыл бұрын
6 months in how are you feeling?
@itgw4658
@itgw4658 Жыл бұрын
9 months in howre you feeling?
@Betoven81
@Betoven81 Жыл бұрын
10 months in how are you feeling?
@brandonh9185
@brandonh9185 10 ай бұрын
A year in how are you feeling
@trumanaddicott7923
@trumanaddicott7923 6 ай бұрын
Thank you. I am becoming a HVAC tech and this has been wonderful. Just finished schooling and completed the EPA exam. Waiting on the results! 22 Y/O Male.
@trevolchapmanll202
@trevolchapmanll202 Жыл бұрын
I appreciate your channel so much! Im starting off as a LV1 apprentice and this video is helping me a lot to what I need to know, learn, and excel at.
@richardstilwell6043
@richardstilwell6043 2 жыл бұрын
me an my best friend have been doing this shit for 5 years and we go above and beyond love watching your videos detail is key!
@macduren4478
@macduren4478 2 жыл бұрын
Great video and great tips. I would also add, leave the workspace cleaner than you found it! Always watch your content.
@justinburks7949
@justinburks7949 2 жыл бұрын
Great vid! Been in the field for 2 years. Straight out of highschool. Thanks for the tips, you hit the hammer on the nail!
@tbejames5634
@tbejames5634 Жыл бұрын
Hey bro how's it going???
@rsj_media
@rsj_media 7 ай бұрын
Planning on starting soon! Great insight on the industry! Can’t wait to start and your videos are helping a lot! Thank you!
@MarylandHvacRepair
@MarylandHvacRepair 2 жыл бұрын
ENJOYING YOUR VIDEOS AN APPRENTICE CAN BE VERY SUCCESSFUL WHEN PAIRED WITH THR RIGHT TECHNICIAN KEEP UP THE GOOD WORK
@itsnotfar
@itsnotfar Жыл бұрын
Did that exactly, showed up early 10 to 15 minutes every day. 10 years worked for same place. Never really good pay. So started my own business to help pay bills. One day called into the office and fired for conflict of interest. Yeah, it still bugs me to this day. I'm at a better place in life because of what happened tho.
@OGHVAC
@OGHVAC 2 жыл бұрын
Fantastic video. Great tips that will go a long way to a successful career in ANY trade. Keep on posting these informative videos.
@carolegeddes998
@carolegeddes998 2 жыл бұрын
Thank you very much for the video. I stumbled upon it and will forward this to someone who could really benefit from your very excellent advice.
@joshuatimmons467
@joshuatimmons467 2 жыл бұрын
I will take that advice landed my first hvac position started last Monday love the trade so far
@rafaelcruz2188
@rafaelcruz2188 Жыл бұрын
you posted this video a year ago and its still doing justice. Thanks for the tips brother! first day starts on Wednesday!
@gldflcn
@gldflcn 10 ай бұрын
I’m starting my 6th week in my apprenticeship! I appreciate all of your videos!
@oliverpernillo9834
@oliverpernillo9834 2 жыл бұрын
Tip #6 never park on home owner’s driveway before asking them. Tip #7 when installing Always protect homeowners wood floors and carpets or cover your shoes with shoe covers if you are just doing maintenance.
@RedemtionMusic
@RedemtionMusic 2 жыл бұрын
You must be a one hour man😂
@oliverpernillo9834
@oliverpernillo9834 2 жыл бұрын
@@RedemtionMusic not at all lol, I just think it’s good to do that
@bobboscarato1313
@bobboscarato1313 2 жыл бұрын
Use drop cloths or tarps in work area! Show respect for your customer's property!
@Betoven81
@Betoven81 Жыл бұрын
@@RedemtionMusicone hour man?
@alexkurfurst5724
@alexkurfurst5724 4 ай бұрын
@@Betoven81escort man
@onethousandbirdsuchiha5646
@onethousandbirdsuchiha5646 Жыл бұрын
Thank you brother for the tips much appreciated it good work your jobs are clean
@Iamacthepromoter
@Iamacthepromoter 2 ай бұрын
I’m in school for this now and honestly u making it look easy and I’m excited thanks i subscribe
@montreal41
@montreal41 Жыл бұрын
I appreciate these videos a lot Zac! Two months into my HVAC schooling up in MTL.
@itgw4658
@itgw4658 Жыл бұрын
Hows it going?
@lemgibbons3539
@lemgibbons3539 3 ай бұрын
How did it go?
@rogermz
@rogermz 10 ай бұрын
I can't believe that I finished the whole video without a single second eclipse. The way that you are narrating and the video editing are really exceptional. This video itself testified that you are doing what you are talking about. You are really paying attention to details.
@yayitsjepoy
@yayitsjepoy 3 сағат бұрын
helpful video! I like the part about everyday learning. learning is a process so it is all about taking steps every day
@simeoncook8040
@simeoncook8040 Ай бұрын
For someone who’s been a service tech for the past 3 years. I started off as an apprentice one thing I can say is work hard and ask questions. Many things I still don’t fully understand but asking the questions in the beginning gives me some answers.
@joelgonzalez5462
@joelgonzalez5462 2 жыл бұрын
Awesome video thank you so much keeping teaching us 👍
@danjoseph7515
@danjoseph7515 2 жыл бұрын
Thanks so much for the advice! I just landed my first HVAC position and will definitely put them to use.
@sonicto
@sonicto 2 жыл бұрын
Enjoy the journey my bro. Never stop learning. This field is always changing
@edgarmenjivar4649
@edgarmenjivar4649 Жыл бұрын
Hows it going
@JuanSanchez-nn1db
@JuanSanchez-nn1db 2 жыл бұрын
Great advise as usual. Thanks
@synthetictruth671
@synthetictruth671 6 ай бұрын
Ive been doing commercial in the area with local 5 just switched ro residential its definitely alot different line of work but im learning way more and enjoyong it more as well
@masodior8076
@masodior8076 5 ай бұрын
21 years old just signed up for Lincoln tech hvac, idk if this is the right idea but at least is a first step. im excited for the future.
@pontiacgt60
@pontiacgt60 2 жыл бұрын
Great tips, im on my last couple days of hvac trade school, and I'm kinda nervous to start. I've never done anything like this and that's what makes it worse. The electrical part makes me extra nervous but hey we all have to start somewhere i guess.
@yamomsahoe9429
@yamomsahoe9429 2 жыл бұрын
Absolutely bro we all started riding being helpers, but like some of us we didn’t go to school we learned as we went so you got a jump on some people, and hey most people don’t know they have a split system 😂 “da thing outside make the air cold” and aye it’s gonna suck being tool grabber at first but at least you get paid for it lol
@metalmurcielago
@metalmurcielago 2 жыл бұрын
Be comfortable with not knowing. That’s the best advice I ever got.
@brayancrespo1517
@brayancrespo1517 2 жыл бұрын
Quick tip always check your leads to ground aka bare metal anywhere - If you’re dealing with 3 phase contactors theres always a terminal or ‘leg’ with power
@michaelduke4500
@michaelduke4500 Ай бұрын
Just stumbled onto your channel and very good straightforward info. I didn't know you were in Nashville; my old stomping grounds.
@thesilentonevictor
@thesilentonevictor 2 жыл бұрын
Great video Zack
@teeg3275
@teeg3275 2 жыл бұрын
Show up earlier, actually retain information, and make atleast look like you give a shit. I learned to do all that with every job started, Hvac in 2019 lucky to start with a good guy got me 5 raises my first 6 months🤘🏽
@MrAgsProd
@MrAgsProd 2 жыл бұрын
Where are you from?
@lukeroelofs2968
@lukeroelofs2968 Жыл бұрын
what is something you would tell somebody before they join the work field in hvac?
@Betoven81
@Betoven81 Жыл бұрын
@@lukeroelofs2968have you gone in the hvac field?
@johnberryconwayiii7071
@johnberryconwayiii7071 2 ай бұрын
Today is my first day, thanks for the tips!
@alanbiato4637
@alanbiato4637 2 жыл бұрын
Profissional de qualidade, faz toda a diferença, parabéns...
@FriedGatoraid
@FriedGatoraid 6 ай бұрын
Man if I had information like this back in the early 90s I would’ve been so good at my job way sooner! KZbin is amazing. When you have trouble just watch some videos.
@eagletek1
@eagletek1 2 жыл бұрын
You're my hero!!!
@taylorfriberg3620
@taylorfriberg3620 2 жыл бұрын
Do you do like a bronze, silver, gold maintenance plan? If so I'd love to see how you organize everything.
@wallridedistro
@wallridedistro 2 жыл бұрын
Thanks From Panama 🇵🇦 🙌🏽
@carllungwitz5171
@carllungwitz5171 Жыл бұрын
50 years in the trade, I've always tried my best to be professional, when I finished a job, I'd ask myself, did I treat the customer right? Did I give this job my best? I took great pride in not having call backs. I would used recipe cards for note taking, I would build up a library of my customers, of what I had done, and many times I would find myself going back to find out some info from months ago.
@dominicgimenez9186
@dominicgimenez9186 Жыл бұрын
Great video like always
@HaddanElliott316
@HaddanElliott316 2 жыл бұрын
good tips, thank you!
@JC-sc9rx
@JC-sc9rx 2 жыл бұрын
Thanks for video about to start with first HVAC/R company!
@Betoven81
@Betoven81 Жыл бұрын
How are things going?
@JC-sc9rx
@JC-sc9rx Жыл бұрын
@@Betoven81 so so..still probably a little better than some things I have done but it is construction so there are lots of days where communication is difficult and professionalism suffers in this industry as well a lot of times in my experience. As in people don't know how to communicate with each other in a professional manner many days in this profession. ( personal opinion).
@Adeadcop702
@Adeadcop702 Ай бұрын
Solid information thank you i am new to this trade frsh out of my trade school looking for work
@BestHVAC
@BestHVAC Жыл бұрын
Great advice
@soloch69
@soloch69 2 жыл бұрын
Great 👍🏻 video like always
@LaineyCharlieHank
@LaineyCharlieHank 3 ай бұрын
I’ve never gone to hvac school. I was probably 20 years old working some 9-5 job and I got hired by an hvac company with no prior experience or knowledge. I didn’t even know what a 6” elbow was lol. Now I’m 23 and working at another hvac company learning news things everyday. Always something new for me to learn. So if I can do it so can everyone else if you make an effort.
@garykintzler4273
@garykintzler4273 2 жыл бұрын
Good information thanks you
@Chris-ru3ri
@Chris-ru3ri 2 жыл бұрын
I always try and stock a bunch of capacitors. I only use Turbo’s if it’s an emergency
@user-xg8ed1yk1s
@user-xg8ed1yk1s 5 ай бұрын
Wo man thank you so much!
@FranklinHalfAddict
@FranklinHalfAddict 11 ай бұрын
Nice to see someone else who removes the fan shroud to clean the inside. Lot of guys don’t do that unfortunately.
@hvacgoat9451
@hvacgoat9451 2 жыл бұрын
These are all great tips! I have about 100 more I could easily add. But I know there aren't too many apprentices watching these videos because I've been looking to hire a decent technician and I can't find any of them !!!! How about a tip on getting these young bucks to actually progress in the trades without needing there hands held the whole time! Lol!
@thoota3010
@thoota3010 2 жыл бұрын
20 years old and i just started last Tuesday in NYC. Attending the Refrigeration Institute for 7 Months. I try doing all the things he noted, following what tools he uses and having em ready, taking note of small things like leaving 2 bolts on a cap for protection in case pressure blows the cap off and your face lol, my boss explained it to me. I ask questions as to what is what and am studying it on my own. Trying to understand condensation, superheating, sub cooling, whatever there is. Breakers, 3 phase 1 phase, control boards, compressor, air handled units, exhaust fans. Tomorrow we are installing a condenser in a residential building in Brooklyn. I hope to learn more as i go but i assure you we’re here. Goal is to master the trade and be the best i can be at it and show gratitude to my boss for giving me the opportunity by becoming the best tech i can be. 1 full week so far and i am Loving it every single bit !
@hvacgoat9451
@hvacgoat9451 2 жыл бұрын
@@thoota3010 hell yeah! The trade needs your efforts amigo. I'm in San Diego, and there isn't nearly enough techs out here, let alone techs that aren't lazy. Good job man!
@thoota3010
@thoota3010 2 жыл бұрын
@@hvacgoat9451 hopefully soon You find em, appreciate your words Boss. Motivation and passion can only lead 1 place my father tells me 👍🏽
@Matt-hr5ng
@Matt-hr5ng 2 жыл бұрын
@@hvacgoat9451 point me the the lead techs willing to teach us the right way
@hvacgoat9451
@hvacgoat9451 2 жыл бұрын
@@Matt-hr5ng right here bud, and the guy who makes these videos. He seems pretty good. That being said, there aren't enough of us either
@mikereno9173
@mikereno9173 11 ай бұрын
RIGHT ON BROTHER!
@ismailahmed8031
@ismailahmed8031 3 ай бұрын
Engineer, I love your work and the method of your examination. Can you make videos teaching how to examine the package schlier?
@chiplaurn8175
@chiplaurn8175 2 жыл бұрын
What’s that hose attachment you used going in between the condenser fan guard? Appreciate your time 🇺🇸
@dieselnick3757
@dieselnick3757 2 жыл бұрын
Anywhere we can buy the quality hvac hat your wearing in the video? Thanks!
@E.K14N
@E.K14N 2 жыл бұрын
Definitely need that too ha
@aalimmansoori5318
@aalimmansoori5318 2 жыл бұрын
Good working
@saintsgun588
@saintsgun588 2 жыл бұрын
My company installs Lennox, and LRP's are the easiest maintenance around.
@boredkid1235
@boredkid1235 Жыл бұрын
Just got accepted. Starting trade school for HVAC in January. I'm feeling pretty confident and ready to get into this. Gonna try to learn as much as I can between now and then.
@Betoven81
@Betoven81 Жыл бұрын
How’s school going?
@boredkid1235
@boredkid1235 Жыл бұрын
@Betoven81 Just finished actually. Planning on having a job by this time next week. I learned a ton. Mostly residential stuff, but definitely enough that I'm ready to get started. We did some installs, pull and cleans, duct work, ecm motor swaps, load calculation, repairs, brazing, all kinds of stuff. Got a lot of 'employment ready' certifications. Class was pretty disorganized and a bit frustrating at times, but I'm glad I went.
@user-hb8rw3nr1h
@user-hb8rw3nr1h 6 ай бұрын
@@boredkid1235This sounds very familiar..😂 but I’m getting outta school in May! How’s it going so far bro?
@boredkid1235
@boredkid1235 6 ай бұрын
@user-hb8rw3nr1h It's going great, I've been working almost 6 months now for a large company in my area. One word of advice- know what you're getting into. Make sure you get with a department or company that's going to put you to work using the skills you're learning in school. I started in an IAQ (indoor air quality) department and while I've made good money and gotten my foot in the door of the industry, I'm currently in a position where I might have to switch jobs in the coming months. I've been doing insulation, duct work, duct cleanings, aeroseals, UV light installs, things like that. I've learned a lot, but I feel like I'd be getting more valuable transferable skills at a smaller company or a maintenence department. I've barely gotten to work on the units themselves which is what I really want to learn to do. That said, I'm still feeling very optimistic about this career path and I'm definitely moving in the right direction. Also I'm getting ready to move out of my mom's house, so that's cool.
@luishidalgo24
@luishidalgo24 2 жыл бұрын
I really enjoy when I get your upload notification
@KingKhokhr
@KingKhokhr Жыл бұрын
Good Video boss
@fender42421
@fender42421 2 жыл бұрын
need to add what the tips and when the time stamps for those tips are just if someone wants to get the info and not the working montage.... but great job!!
@billyflanagan9657
@billyflanagan9657 10 ай бұрын
Take care of your tools especially the one's you're company bought for you. Always safety comes first
@davidtomlinson5473
@davidtomlinson5473 7 ай бұрын
just got my ep 608 universal time to start Learning more
@galibkhankhan3958
@galibkhankhan3958 Жыл бұрын
Hi sir I am impressed
@mechanic350
@mechanic350 5 ай бұрын
Question: that condenser unit weep hole vent pipe where you placed the vacuum cleaner, is that suppose to have water all of the time? Or is it suppose to be dried?
@hectorgarcia-zv1wi
@hectorgarcia-zv1wi 2 ай бұрын
Right onn Brotha
@matthewthomas7648
@matthewthomas7648 Жыл бұрын
Hey bud i got a question. Im considering a career change in hvac. Do you recommend going to school and learn hvac or just doing an apprenticeship to get experience?
@LegendaryPrince777
@LegendaryPrince777 Жыл бұрын
Do you borrow their water hose or you have your own water hose’s?
@gonehere4330
@gonehere4330 2 жыл бұрын
i like your video bro nice and sharp
@ssmith1129
@ssmith1129 2 жыл бұрын
I want a hat brother! Great Videos!
@iuvenismusic5116
@iuvenismusic5116 10 ай бұрын
Do I need to go to trade school in order to obtain a HVAC job or can I start as an apprentice without completing trade school?
@eagletek1
@eagletek1 2 жыл бұрын
Where you get the spray wand
@kenwhiteproductions
@kenwhiteproductions 2 жыл бұрын
I wish our turbo cap zip ties worked in AZ. They are always dry-rotted out of the box =[
@mdnite2941
@mdnite2941 2 жыл бұрын
Great video! Where did you get the long wand that attached to the water hose to clean the condenser coil? Do you have a part number for it? Thanks👍
@DAVIDANDGREGORYESHOW
@DAVIDANDGREGORYESHOW 2 жыл бұрын
Following. I wanna know too. 👀
@autobot051098
@autobot051098 2 жыл бұрын
^^
@DamnThatsKrazyyy
@DamnThatsKrazyyy 2 жыл бұрын
second
@omarmojica1132
@omarmojica1132 2 жыл бұрын
Following
@joshuacote5202
@joshuacote5202 2 жыл бұрын
Would like to know where to get that too
@superheatsubcool
@superheatsubcool 11 ай бұрын
If you are able to ride with a good tech pick up on what they do right and what could be done better and incorporate that into your own practices. Your only an apprentice for a short time and then your thrown to the wolves, so pick up all you can before your running on your own, 45+ years in one of the best all around trades in the world.
@Holop88
@Holop88 2 жыл бұрын
Did you check operation of the units?
@Erby.05
@Erby.05 16 күн бұрын
I show up slightly early 5 minutes or so, and drive across our compound to make sure known of our guys need help doing something in the yard
@cope_is_hope
@cope_is_hope Жыл бұрын
is going to a trade school for hvac worth it?
@jaybrick8973
@jaybrick8973 Жыл бұрын
I graduate from school soon an I'm very nervous I know a lot but I still feel like I'm confused on a lot of things thanks for tips
@Undrocity
@Undrocity Жыл бұрын
I graduated HVAC school back in 2020. I felt confused on some stuff coming out too. Once you get out in the field and gets hands on it’ll all come together.
@jaybrick8973
@jaybrick8973 Жыл бұрын
@@Undrocity o ok did you apply for an apprentice position coming out
@Undrocity
@Undrocity Жыл бұрын
@@jaybrick8973 apprentice/helper is what you’ll start out as. Trust me school helps everything come together once you get out there. You’ll move up faster since you have schooling and know most of the theory. You just need the hands on. You’ll still need to work hard and pay attention. I’ve learned so much since being out of school.. stuff they didn’t even cover. But it’s fun and I enjoy this type of work. I’m continually learning.. everyday. Something that might help you is to KZbin like residential installation of furnace coil & condenser. It’ll help you get a better understanding of what’s to come. Also “AC Service tech” is a GREAT KZbin channel to learn from I cannot stress that enough. I learned more from that channel then I did from school.
@Undrocity
@Undrocity Жыл бұрын
@@jaybrick8973 also, what state are you from will determine the work you do
@jaybrick8973
@jaybrick8973 Жыл бұрын
@@Undrocity o ok yeah I've been applying for apprentice position but nothing yet an I'm in Michigan
@azizmahama5174
@azizmahama5174 2 жыл бұрын
I love your job details! Let’s do some work.
@angeloandverny
@angeloandverny 2 жыл бұрын
What is that sweet water hose attachment that you used for the coil at 3:40
@Betoven81
@Betoven81 Жыл бұрын
Same thing I was wondering
@rickschiaffo618
@rickschiaffo618 12 күн бұрын
So, do you charge the same for a Turbo 200 that you would a $20 Bojack? Just curious about billing.
@zach---
@zach--- 4 ай бұрын
How do I pick up the pace I just started as installer helper and they told me I’m moving slow I’m a big guy and I try but I just want some other insight on picking up the pace so I can work my way up the ranks
@erhiueQWEF
@erhiueQWEF 3 ай бұрын
Just keep those knees moving. You don't have to sprint around, but these guys need to see that you're taking it seriously and that you give a shit. Another tip I can give you is that if your weight is becoming a serious issue, then you need to start hitting the gym. That means you'll be away from the home longer, but nobody that ever became a somebody didn't have to sacrifice something for it.
@waynelutz
@waynelutz 2 жыл бұрын
Did you fire your apprentice?
@shawnalexander8009
@shawnalexander8009 11 ай бұрын
That is why they have weren't used on air conditioners But that also depends on how long the warranty is and the brand of the air conditioner
@zacstephenson3734
@zacstephenson3734 2 жыл бұрын
Any advice for someone going on 40 years old and has pondered this as a career to get out of factories? Or would that possibly be too old and late in life?
@truthbebold4009
@truthbebold4009 Жыл бұрын
I'm 47 and looking at the option. I have a few years of electrical experience and experience in other related fields. I feel pretty confident that the majority of shops would like to have me on their team. I've listened to a few of these finding employment in HVAC type videos and have heard them say multiple times that they see guys starting in their 40's and 50's. I'm so fascinated by this stuff I feel like I have to pursue it. Best of luck and God bless
@jaybrick8973
@jaybrick8973 Жыл бұрын
I'm in my early 30s definitely not to late
@Betoven81
@Betoven81 Жыл бұрын
@@truthbebold4009I’m 41 and I thought I was too old. I’ve been procrastinating getting in but I think it’s the right decision. Have you started yet?
@getrektnoobgg5043
@getrektnoobgg5043 2 жыл бұрын
What kind of questions should an apprentice ask?
@lalo9907
@lalo9907 Ай бұрын
Where did u buy that vacum
@alanbiato4637
@alanbiato4637 2 жыл бұрын
Top das galáxias
@barronweir123
@barronweir123 2 жыл бұрын
May I ask do you have a journeyman license or master mechanical license ?? Just curious
@Sesamestreet9080
@Sesamestreet9080 2 жыл бұрын
He has a master since he owns his own company
@shanthaghnazarian1475
@shanthaghnazarian1475 2 жыл бұрын
Question, how do you measure capacitor under load with fieldpiece multimeter that you have?
@clubtouge1052
@clubtouge1052 2 жыл бұрын
Amps times 2,652 divided by volts
@shanthaghnazarian1475
@shanthaghnazarian1475 2 жыл бұрын
@@clubtouge1052 its just sad to accept that fieldpiece multimeter isn't capable of measuring the mfd under load🤦‍♂️
@bobboscarato1313
@bobboscarato1313 2 жыл бұрын
@@shanthaghnazarian1475 When in doubt try a new capacitor; I don't remember having to test mfd under load ever in 60 years!
@deadeyedeafy6958
@deadeyedeafy6958 Жыл бұрын
@@shanthaghnazarian1475 thats not true, you can absolutely test caps under load with any meter that can measure amps and volts.
@leviweltin1163
@leviweltin1163 2 жыл бұрын
If you just hustle and show up on time now days you'll stand out.
@Zee-hl5iu
@Zee-hl5iu 2 жыл бұрын
why don't they have a p trap on that unit you did the run cap on? Is that one of those internal p traped unites
@aaronjosselyn8827
@aaronjosselyn8827 2 жыл бұрын
I’ve been taught it depends on where the drain is as compared to the indoor blower . If it’s before it (negative pressure side) , you need a trap and if it’s after (positive pressure side ) you need no trap
@yamomsahoe9429
@yamomsahoe9429 2 жыл бұрын
@@aaronjosselyn8827 true true
@c_young-hvac4586
@c_young-hvac4586 2 жыл бұрын
Rheem package units have an factory installed trap next to the compresser
Typical HVAC unit LEAKING refrigerant & How I Fixed it.
17:37
Quality HVACR
Рет қаралды 36 М.
How Many Calls In ONE Day Is Too Much?? | HVAC Life
14:32
Quality HVACR
Рет қаралды 184 М.
لااا! هذه البرتقالة مزعجة جدًا #قصير
00:15
One More Arabic
Рет қаралды 26 МЛН
Gym belt !! 😂😂  @kauermotta
00:10
Tibo InShape
Рет қаралды 18 МЛН
Stay on your way 🛤️✨
00:34
A4
Рет қаралды 27 МЛН
Secret Experiment Toothpaste Pt.4 😱 #shorts
00:35
Mr DegrEE
Рет қаралды 39 МЛН
All AC Parts and What They Do
33:24
Word of Advice TV
Рет қаралды 1,6 МЛН
Should YOU Choose HVAC As A Career?? My Honest Opinion…
18:56
Quality HVACR
Рет қаралды 202 М.
Tools Required to be an effective HVAC Technician
19:03
Titan Heating & Air Conditioning
Рет қаралды 69 М.
Unable to Repair 4 Year Old HVAC Unit…Homeowner is Furious! 😡
15:37
Critical System Diagnosis for Residential HVAC
41:45
HVAC School
Рет қаралды 422 М.
What YOU Need To Know BEFORE Getting In The HVAC Trade!!
15:35
Quality HVACR
Рет қаралды 104 М.
لااا! هذه البرتقالة مزعجة جدًا #قصير
00:15
One More Arabic
Рет қаралды 26 МЛН